1-GHz-spaced 16-channel arrayed-waveguide grating for a wavelength reference standard in DWDM network systems

We fabricated a 1-GHz-spaced 16-channel arrayed-waveguide grating (AWG) by using a new AWG configuration where the path of each arrayed waveguide winds backward and forward across a 4-in diameter wafer without crossing any other waveguides. The ultra-narrow (< 1 GHz) and stable transmission bands of this AWG can be used to construct a wavelength reference standard covering the S, C, and L bands in the dense wavelength-division-multiplexing network systems whose frequency deviation is /spl plusmn/160 MHz.     

AWG中阵列波导耦合系数的计算

针对阵列波导光栅（AWG）中阵列波导耦合系数的计算问题，提出了基于光束传播方法（BPM）的叠加积分方法的修正方法。将修正前、后的结果与简单叠加积分方法的结果作了分析比较，从而验证了修正方法的正确性。分析了阵列波导之间的耦合对耦合系数的影响，阵列波导间距越小，影响越大。     

箱型光谱响应聚合物阵列波导光栅的研制

通过减少奇数阵列波导的芯宽度,同时增加偶数阵列波导的芯宽度的技术,构造了箱型光谱. 选用氟化聚芳醚FPE聚合物材料,设计并制备了17×17信道箱型光谱响应阵列波导光栅（AWG）波分复用器. 测试结果表明,器件的中心波长为1550.87nm,波长间隔为0.8nm, 3dB带宽约为0.476nm,串扰低于-21dB,插入损耗为13~15dB.     

箱型光谱响应聚合物阵列波导光栅的研制

通过减少奇数阵列波导的芯宽度,同时增加偶数阵列波导的芯宽度的技术,构造了箱型光谱-选用氟化聚芳醚FPE聚合物材料,设计并制备了17×17信道箱型光谱响应阵列波导光栅(AWG)波分复用器.测试结果表明,器件的中心波长为1550.87nm,波长间隔为0.8nm,3dB带宽约为0.476nm,串扰低于-21dB,插入损耗为13～15dB.     

Analysis of Optical Signal Transmission Characteristics in AWG Multi/Demultiplexer with Electromagnetic Field Theory

Based on the electromagnetic field theory, the optical signal transmission characteristics in input/output waveguides, slab waveguides and arrayed waveguides of the arrayed waveguide grating (AWG) multi/demultiplexer are analyzed. The relationship between the physical parameters such as geometry sizes and relative refractive index in AWG multi/demultiplexer and the optical signal transmission characteristics are discussed. This theoretical study can be used for optimizing the design and improving the performance of the AWG multi/demultiplexer.     

Analysis of Optical Singal Transmission Characteristics in AWG Multi/Demultiplexer with Electromagnetic Field Theory

Based on the electromagnetic field theory,the optical signal transmission characteristics in input/output waveguides,slab waveguides and arrayed waveguides of the arrayed waveguide grating(AWG) multi/demultiplexer are analyzed.The relationship between the physical parameters such as geometry sizes and relative refractive index in AWG multi/demultiplexer and the optical signal transmission characteristics are discussed.This theoretical study can be used for optimizing the design and improving the performance of the AWG multi/demultiplexer.     

Improve Channel Uniformity of an Si-Nanowire AWG Demultiplexer by Using Dual-Tapered Auxiliary Waveguides

Dual-tapered auxiliary waveguides at the exit of the waveguide array are introduced to improve the channel uniformity of an Si-nanowire-based arrayed waveguide grating (AWG) demultiplexer. By using a hybrid simulation method, the dual-tapered auxiliary waveguides of the AWG demultiplexer are optimized reliably and efficiently. A 12-channel AWG demultiplexer is designed as an example, and a small nonuniformity (< 0.5 dB) is achieved.     

New design for low-loss star couplers and arrayed waveguide gratingdevices

We propose a new loss reduction method in star couplers employing UV-written tapers that replace the free propagation region in the conventional star couplers and apply them to an arrayed waveguide grating (AWG) device. The insertion loss of the new AWG device can be reduced to 0.31 dB, which is about 0.7 dB lower than that of the AWG without UV-written tapered waveguides     

工艺误差对AWG串扰特性的影响

分析了阵列波导光栅器件的制作过程中引入的各种工艺误差。对波导尺寸误差、折射率误差以及长度误差进行了等效,并计算了位相误差和振幅误差的方差。最后分析了位相误差和振幅误差对阵列波导光栅的频谱特性尤其是相邻通道间的串扰特性的影响。     

一种新颖结构紧凑的AWG器件

给出一种基于SOI材料结构紧凑的新颖AWG器件,它是将一个全内反射波导镜插入原波导阵列中间,并且利用全内反射时产生的相位差进行TE、TM模偏振补偿的方法,该器件具有尺寸小、制作工艺简单等特点.同时,给出一些实验结果,实验结果证实这种结构的AWG器件是可行的.     

Low-crosstalk 10-GHz-spaced 512-channel arrayed-waveguide gratingmulti/demultiplexer fabricated on a 4-in wafer

We report a 10-GHz-spaced 512-channel arrayed-waveguide grating (AWG) multi/demultiplexer fabricated on a 4-in wafer. We achieved this by folding the 7-cm-long slab waveguides of a conventionally configured AWG, so that the whole configuration was contained in the wafer and then attached reflecting mirrors at the folded parts. Phase compensation of the fabricated AWG was performed by means of ultraviolet irradiation through a metal mask     

氟化聚合物光谱响应平坦化阵列波导光栅的优化设计和制备

本文基于阵列波导光栅(AWG)的传输理论,利用含氟聚合物(PFS-co-GMA)共聚物材料,对17×17信道光谱响应平坦化AWG波分复用器进行了参数优化.由于在聚合物阵列波导光栅器件的制备过程中,选用了反应离子刻蚀(RIE)工艺和蒸汽回溶技术,形成的梯形截面波导芯,使AWG传输的光产生相位移,导致传输光谱移动,引起串扰...     

一种新颖结构紧凑的AWG器件

给出一种基于SOI材料结构紧凑的新颖AWG器件,它是将一个全内反射波导镜插入原波导阵列中间,并且利用全内反射时产生的相位差进行TE、TM模偏振补偿的方法,该器件具有尺寸小、制作工艺简单等特点.同时,给出一些实验结果,实验结果证实这种结构的AWG器件是可行的.     

一种降低列阵波导光栅相邻信道串扰的方法

阵列波导光栅 (AWG)作为波长滤波器在光通信领域具有很大的应用前景。串扰是影响阵列波导光栅应用的重要因素之一。为了降低阵列波导光栅相邻信道的串扰 ,本文提出并研究了一种降低阵列波导光栅的新方法。该方法利用阵列波导光栅的衍射特点性 ,通过调节阵列波导光栅的自由光谱范围 (FSR)、罗兰圆焦距和阵列波导数目 ,使得各信道信号的输出极小值处于其它信道输出波导中心 ,无次极大处于其它波导中 ,从而降低了阵列波导光栅的串扰 ,特别是相邻信道之间的串扰。通过光束传播方法 (BPM)的模拟了具有不同FSR的 1× 16阵列波导光栅 ,结果显示 ,该方法能将相邻信道之间的串扰降低约 5 .7dB。     

Polymeric optical waveguide circuits formed using silicone resin

Polymeric optical waveguides fabricated using a newly developed silicone resin have a low birefringence as well as low propagation loss and good environmental stability. Optical waveguide circuits including a directional coupler, an arrayed waveguide grating (AWG) multi/demultiplexer, and a digital thermooptic (TO) switch are successfully realized using the silicone resin     

10-GHz and 20-GHz Channel Spacing High-Resolution AWGs on InP

This letter reports on 10-GHz and 20-GHz channel-spacing arrayed waveguide gratings (AWGs) based on InP technology. The dimensions of the AWGs are 6.8$,times,$8.2 mm$^{2}$ and 5.0$,times,$6.0 mm$^{2}$, respectively, and the devices show crosstalk levels of $-$12 dB for the 10-GHz and $-$17 dB for the 20-GHz AWG without any compensation for the phase errors in the arrayed waveguides. The root-mean-square phase errors for the center arrayed waveguides were characterized by using an optical vector network analyzer, and are 18 $^{circ}$ for the 10-GHz AWG and 28$^{circ}$ for the 10-GHz AWG.      

复用器/解复用器级联对40 Gb/s信号传输的影响

对光网络中复用器/解复用器的级联时信号传输的影响进行了研究.分别讨论了在40 Gb/s数据传输速率下,复用器/解复用器级联造成非归零码、载波压缩归零码和归零码等不同调制码型,以及不同占空比的归零码的码间干扰所导致的功率代价,分析了在复用器/解复用器滤波中心频率随机偏移的情况下,级联对信号传输的影响.     

1.5%-/spl Delta/ athermal arrayed-waveguide grating multi/demultiplexer with very low loss groove design

We describe a compact 1.5%-/spl Delta/ athermal silica-based 100-GHz-spacing 16-channel arrayed-waveguide grating (AWG) multi/demultiplexer with a modified groove design for a very low excess loss. We propose new approaches for modifying the shape of the grooves and the arrayed waveguides and optimize the shape modifications for 1.5%-/spl Delta/ waveguides. By employing this modified groove design, we greatly reduced the groove excess loss from 1.9 to 0.4 dB in the 1.5%-/spl Delta/ athermal AWG.     

Design and fabrication of 25-channel 200 GHz AWG based on Si nanowire waveguides

A 25-channel 200 GHz arrayed waveguide grating (AWG) based on Si nanowire waveguides is designed, simulated and fabricated. Transfer function method is used in the simulation and error analysis of AWG with width fluctuations. The 25-channel 200 GHz AWG exhibits central channel insertion loss of 6.7 dB, crosstalk of ?13 dB, and central wavelength of 1 560.55 nm. The error analysis can explain the experimental results of 25-channel 200 GHz AWG well. By using deep ultraviolet lithography (DUV) and inductively coupled plasma etching (ICP) technologies, the devices are fabricated on silicon-on-insulator (SOI) substrate. This work has been supported by the National Key Research and Development Program of China (No.2016YFB0402504), and the National Natural Science Foundation of China (Nos.61435013 and 61405188). E-mail:zhangjiashun@semi.ac.cn      

Low‐Loss Compact Arrayed Waveguide Grating with Spot‐Size Converter Fabricated by a Shadow‐Mask Etching Technique

This paper describes a low‐loss, compact, 40‐channel arrayed waveguide grating (AWG) which utilizes a monolithically integrated spot‐size converter (SSC) for lowering the coupling loss between silica waveguides and standard single‐mode fibers. The SSC is a simple waveguide structure that is tapered in both the vertical and horizontal directions. The vertically tapered structure was realized using a shadow‐mask etching technique. By employing this technique, the fabricated, 40‐channel, 100 GHz‐spaced AWG with silica waveguides of 1.5% relative index‐contrast showed an insertion‐loss figure of 2.8 dB without degrading other optical performance.