Three-dimensional fluidic self-assembly by axis translation of two-dimensionally fabricated microcomponents in railed microfluidics

A method for high-throughput 3D self-assembly of 2D photopatterned microstructures using railed microfluidics is presented. Vertical device patterning of heterogeneous materials requires high-level integration using conventional microelectromechanical system (MEMS) technology; however, 3D railed assembly enables easy and fast self-assembly via a fluidic axis-translation process and simple material exchange in microfluidic channels. Individually photopatterned 2D microstructures are axis-translated from in-plane to out-of-plane and fluidically self-assembled, guided by side-rails in microfluidic channels to form a 3D morphology. Since the structures are fabricated in fluidic environments, there are no fixed initial points on the channel substrate allowing fluidic horizontal stacking of erected 2D structures. The guiding mechanism of railed microfluidics enables efficient fluidic handling and deterministic 3D self-assembly of heterogeneous components such as electronic components or polymeric microstructures using only fluidic force.     

Self-assembled microdevices driven by muscle

Current procedures for manual extraction of mature muscle tissue in micromechanical structures are time consuming and can damage the living components. To overcome these limitations, we have devised a new system for assembling muscle-powered microdevices based on judicious manipulations of materials phases and interfaces. In this system, individual cells grow and self-assemble into muscle bundles that are integrated with micromechanical structures and can be controllably released to enable free movement. Having realized such an assembly with cardiomyocytes we demonstrate two potential applications: a force transducer able to characterize in situ the mechanical properties of muscle and a self-assembled hybrid (biotic/abiotic) microdevice that moves as a consequence of collective cooperative contraction of muscle bundles. Because the fabrication of silicon microdevices is independent of the subsequent assembly of muscle cells, this system is highly versatile and may lead to the integration of cells and tissues with a variety of other microstructures.     

Cell Docking in Double Grooves in a Microfluidic Channel

Microstructures that generate shear‐protected regions in microchannels can rapidly immobilize cells for cell‐based biosensing and drug screening. Here, a two‐step fabrication method is used to generate double microgrooves with various depth ratios to achieve controlled double‐level cell patterning while still providing shear protection. Six microgroove geometries are fabricated with different groove widths and depth ratios. Two modes of cell docking are observed: cells docked upstream in sufficiently deep and narrow grooves, and downstream in shallow, wide grooves. Computational flow simulations link the groove geometry and bottom shear stress to the experimental cell docking patterns. Analysis of the experimental cell retention in the double grooves demonstrates its linear dependence on inlet flow speed, with slope inversely proportional to the sheltering provided by the groove geometry. Thus, double‐grooved microstructures in microfluidic channels provide shear‐protected regions for cell docking and immobilization and appear promising for cell‐based biosensing and drug discovery.     

Luminescent supramolecular microstructures containing Ru(bpy)3(2+): solution-based self-assembly preparation and solid-state electrochemiluminescence detection application

In this correspondence, we report on the first preparation of novel, robust Ru(bpy)32+-containing supramolecular microstructures via a solution-based self-assembly strategy, carried out by directly mixing H2PtCl6 and Ru(bpy)3Cl2 aqueous solutions at room temperature. It reveals that both the molar ratio and concentration of reactants have a heavy influence on the morphologies of such microstructures. The electrochemical behavior of the Ru(bpy)32+ components contained in the solid film of the microstructures formed on the electrode surface is also studied and found to exhibit a diffusion-controlled voltammetric feature. Most importantly, such microstructures exhibit excellent electrochemiluminescence (ECL) behaviors and therefore hold great promise as new luminescent materials for solid-state ECL detection in capillary electrophoresis (CE) or CE microchip.     

Elastic waves and solid armature contact pressure in electromagnetic launchers

Electromagnetic launchers suffer a phenomenon referred to as armature transitioning: when the armature and rails suddenly lose contact with each other, damage can occur to the armature and the rails of the launcher. In this paper, we explore transient elastic waves as a possible explanation for the transitioning of solid armatures in electromagnetic launchers. We use a finite-element code to model the transient dynamics of a typical electromagnetic launcher guide rail. We found that dynamic rail deflections caused by the movement of the armature are similar in magnitude to those caused by the magnetic field, and that the contact pressure between the armature and the rails changes dramatically when the speed of the armature reaches the critical velocity of the rails.     

Self-assembly of polymeric microspheres of complex internal structures.

Self-assembly can easily produce intricate structures that would be difficult to make by conventional fabrication means. Here, self-assembly is used to prepare multicomponent polymeric microspheres of arbitrary internal symmetries. Droplets of liquid prepolymers are printed onto a water-soluble hydrogel, and are allowed to spread and coalesce into composite patches. These patches are then immersed in an isodense liquid, which both compensates the force of gravity and dissolves the gel beneath the polymers. Subsequently, the patches fold into spheres whose internal structures are dictated by the arrangement of the droplets printed onto the surface. The spheres can be solidified either thermally or by ultraviolet radiation. We present a theoretical analysis of droplet spreading, coalescence and folding. Conditions for the stability of the folded microspheres are derived from linear stability analysis. The composite microbeads that we describe are likely to find uses in optics, colloidal self-assembly and controlled-delivery applications.     

Self-assembly of polyamines as a facile approach to fabricate permeability tunable polymeric shells for biomolecular encapsulation

In this article, the self-assembly of polyamines as a facile approach to fabricate permeability tunable polymeric shells for encapsulation of relatively low molecular weight (LM(w)) hydrophilic biomacromolecules (M(w) ≈ 4000 Da) is presented. The entire process is performed in organic solvents within 2 to 4 h to allow for nearly 100% encapsulation yield. The polymeric shells are fabricated by a two-step process: 1) The self-assembly of polyamines (nonionized poly(allylamine) (niPA) or branched nonionized polyethyleneimine (niPEI)) within porous agarose microbeads via an inwards buildup self-assembly process. 2) Stabilization of assembled polyamines either via covalent (cross-linkers) or ionic bonding (complex with nonionized poly(styrene sulfonic acid) (niPSS)). Stable and distinct polymeric shells are formed in both cases. The shell thickness is demonstrated to be tunable within a range of 1 to 14 μm; and as the inwards buildup self-assembly technique is not a self-limiting process, shells with broader thicknesses can be achieved. Also, it is demonstrated that the polymer density of the shell can be tuned. Depending on the fabrication parameters, the resulting polymeric shells have been demonstrated to have different permeability characteristics for relatively LM(W) dextran (M(W) ≈ 4000 Da). For example, niPEI shells are observed to have a higher permeability than niPA shells. Therefore, polymeric capsules can be fabricated via this facile approach for either retention of relatively LM(w) hydrophilic biomacromolecules or designed to passively or responsively release the biomacromolecule payload. This two-step shell fabrication process represent an alternative and facile approach for the fabrication of self-assembled polymeric shells in the fields of capsule-based reactors/sensors and drugs/gene delivery where relatively LM(w) macromolecules are concerned.     

Hot-spot engineering in polygonal nanofinger assemblies for surface enhanced Raman spectroscopy

Multiparticle assemblies of nanoscale structures are the fundamental building blocks for powerful plasmonic devices. Here we show the controlled formation of polygonal metal nanostructure assemblies, including digon, trigon, tetragon, pentagon, and hexagon arrays, which were formed on top of predefined flexible polymer pillars that undergo self-coalescence, analogous to finger closing, with the aid of microcapillary forces. This hybrid approach of combining top-down fabrication with self-assembly enables the formation of complex nanoplasmonic structures with sub-nanometer gaps between gold nanoparticles. On comparison of the polygon-shaped assemblies, the symmetry dependence of the nanoplasmonic structures was determined for application to surface enhanced Raman spectroscopy (SERS), with the pentagonal assembly having the largest Raman enhancement for the tested molecules. Electromagnetic simulations of the polygonal structures were performed to visualize the field enhancements of the hot spots so as to guide the rational design of optimal SERS structures.     

Zero‐Depth Interfacial Nanopore Capillaries

High‐fidelity analysis of translocating biomolecules through nanopores demands shortening the nanocapillary length to a minimal value. Existing nanopores and capillaries, however, inherit a finite length from the parent membranes. Here, nanocapillaries of zero depth are formed by dissolving two superimposed and crossing metallic nanorods, molded in polymeric slabs. In an electrolyte, the interface shared by the crossing fluidic channels is mathematically of zero thickness and defines the narrowest constriction in the stream of ions through the nanopore device. This novel architecture provides the possibility to design nanopore fluidic channels, particularly with a robust 3D architecture maintaining the ultimate zero thickness geometry independently of the thickness of the fluidic channels. With orders of magnitude reduced biomolecule translocation speed, and lowered electronic and ionic noise compared to nanopores in 2D materials, the findings establish interfacial nanopores as a scalable platform for realizing nanofluidic systems, capable of single‐molecule detection.     

Microfabricated polymer analysis chip for optical detection

A coupling between multimode polymer waveguides and microfluidic channels on a polymethylmethacrylate (PMMA) capillary electrophoresis (CE)-chip for optical analytical applications has been successfully realised. This technology allows the integration of polymer optical waveguides together with hermetically sealed fluidic channels. The microchannels and waveguides are made in PMMA by the approved hot-embossing technology. The technology developed for the fabrication of polymer waveguides on the microfluidic chip offers the possibility of great flexibility in the choice of core materials, design and alignment of the polymer waveguides. The integration of polymer waveguides on an analysis chip enables highly spatially resolved optical detection without the large and expensive conventionally used apparatus. The optical properties of the analytical system developed are verified by transmission and propagation loss measurements. The results of measurements prove the suitability of the presented device for optical applications between 440 and 800 nm. This was shown with absorbance measurements of the dye Sulfanilazochromotrop (SPADNS) within 50 microm fluidic channels.     

Fabrication of poly(methyl methacrylate) microfluidic chips by atmospheric molding

A greatly simplified method for fabricating poly(methyl methacrylate) (PMMA) separation microchips is introduced. The new protocol relies on UV-initiated polymerization of the monomer solution in an open mold under ambient pressure. Silicon microstructures are transferred to the polymer substrate by molding a methyl methacrylate solution in a sandwich (silicon master/Teflon spacer/glass plate) mold. The chips are subsequently assembled by thermal sealing of the channel and cover plates. The new fabrication method obviates the need for specialized replication equipment and reduces the complexity of prototyping and manufacturing. Variables of the fabrication process were assessed and optimized. The new method compares favorably with common fabrication techniques, yielding high-quality devices with well-defined channel and injection-cross structures, and highly smoothed surfaces. Nearly 100 PMMA chips were replicated using a single silicon master, with high chip-to-chip reproducibility (relative standard deviations of 1.5 and 4.7% for the widths and depths of the replicated channels, respectively). The relatively high EOF value of the new chips (2.12 x 10(-4) cm(2) x V(-1) x s(-1)) indicates that the UV polymerization process increases the surface charge and hence enhances the fluidic transport. The attractive performance of the new CE microchips has been demonstrated in connection with end-column amperometric and contactless-conductivity detection schemes. While the new approach is demonstrated in connection with PMMA microchips, it could be applied to other materials that undergo light-initiated polymerization. The new approach brings significant simplification of the process of fabricating PMMA devices and should lead to a widespread low-cost production of high-quality separation microchips.     

纳米颗粒的自组装及其在锂离子电池中的应用EI北大核心CSCD

在简要介绍纳米颗粒的基本物理-化学性能及其制备现状的基础上,着重论述了纳米颗粒自组装的类型及原理,总结了纳米颗粒自组装在锂离子电池上的应用研究进展,并指出该应用中存在制备效率低、污染较大等问题,提出今后工作将集中在开发合适组装单元、揭示自组装基本原理、简化制备程序等方面,认为纳米材料合成过程中实现多层次/功能电池结构调控是未来发展的重要方向之一。     

微结构光学元件快速伺服刀架加工技术研究

微结构光学元件是一种微小的拓扑元件,通常分为微沟槽列阵、锥形列阵以及微透镜列阵等.这些微结构光学元件能在一些手持装置（例如手机）的平板显示器上得到先进的光学应用.由于产品微型化的需求越来越紧迫,传统的刻蚀方法不再适用于加工高质量的光学微结构产品,为此,提出了一种新型的加工高质量光学微结构元件的技术.该技术以快速伺服刀架加工系统为基础,并结合新开发的刀具轨迹生成器.该刀具路径生成器主要是针对快速伺服刀架加工系统而开发的,它可以根据光学微结构元件的设计直接生成加工所需的刀具轨迹,而不需要进行任何的后续处理.最后,通过加工实例证明了上述加工系统的可行性并得到了符合要求的加工效果.     

Capillarity induced solvent-actuated bonding of polymeric microfluidic devices

Rapid, robust, and economical fabrication of fluidic microchannels is of fundamental importance for the successful development of disposable lab-on-a-chip devices. In this work, we present a solvent-actuated bonding method for fabricating polymeric microfluidic devices at room temperature. A PMMA sheet with an imprinted microchannel was clamped to a blank PMMA sheet, and then 80 +/- 5 muL of acetone (bonding solvent) was introduced at one end of the fluidic channel and aspirated out at the other end. As the solvent moved down the channel, capillary forces drew a fraction of the solvent into the interstitial space between the two polymeric substrates. After aspiration, the assembly was incubated in the clamp for 5 min for effective bond formation. The quantity of the bonding solvent, its water content and flow rate, along with residence time in the channel were found to have significant impact on the bond quality and the channel integrity. Microfluidic electrophoretic separations of a 400-base DNA ladder were performed in devices fabricated using this method in less than 8 min with efficiencies routinely between 2 x 10(6) and 3 x 10(6) plates/m. The simplicity and economy of this technique make it amenable for automation and mass production, which could make polymeric substrates more attractive for single-use chemical analysis devices.     

Membrane growth of nanoporous silicates via the self-assembly monolayer

The self-assembly monolayer (SAM) method was used for membrane fabrication, in which Si wafers were treated separately with N-trimethoxysilylpropyl-n,n,n-tri-n-butylammonium bromide (TMSP-TBA) and N-trimethoxysilylpropyl-n,n,n-trimethylammonium chloride (TMSP-TMA) to form monolayers on the Si surfaces. To grow silicate membranes on the organosilyl-treated Si wafers, a series of silicate sols were prepared with composites of tetraethylorthosilicate (TEOS) and methyltriethoxysilane (MTES) as silicate sources, and tetrapropylammonium bromide (TPABr) was used as an organic template. Their microstructures were investigated in detail by comparing them using SEM and XRD. The use of MTES hindered the formation of microporous channels in the calcined silicate samples. The calcined silicate samples became totally amorphous over 20% loading of MTES. In addition, their structural information was supported by spectroscopic (FT-IR and solid-state 29Si NMR) analyses.     

Self-assembly: a minimalist route to the fabrication of nanomaterials

Self-assembly of molecular or nonmolecular components by non-covalent interactions offers an invaluable tool for the preparation of discrete nanostructures and extended 2D and 3D materials, which are often not accessible by any other fabrication process. In this article we summarize the most recent advances in the generation of nanomaterials such as self-assembled monolayers (SAMs) and structures formed from amphiphilic molecules, colloids, peptides, and polymers by nontemplated self-assembly either at the solid state or in solution. The current status of templated self-assembly and the use of self-assembled structures as template and for patterning other materials is also covered. A special emphasis is placed on strategies presenting either original and somehow exploratory approaches, eventually combining bottom-up and top-down methods, or that concern methods for the production of materials with potential application, e.g., in photonics, as sensors, for drug delivery and electric and magnetic devices. In all the sections, we outline self-organization and applications enabled with self-separated block copolymers.     

Biphasic Janus particles with nanoscale anisotropy

Advances in the field of nanotechnology have fuelled the vision of future devices spawned from tiny functional components that are able to assemble according to a master blueprint. In this concept, the controlled distribution of matter or 'patchiness' is important for creating anisotropic building blocks and introduces an extra design parameter--beyond size and shape. Although the reliable and efficient fabrication of building blocks with controllable material distributions will be of interest for many applications in research and technology, their synthesis has been addressed only in a few specialized cases. Here we show the design and synthesis of polymer-based particles with two distinct phases. The biphasic geometry of these Janus particles is induced by the simultaneous electrohydrodynamic jetting of parallel polymer solutions under the influence of an electrical field. The individual phases can be independently loaded with biomolecules or selectively modified with model ligands, as confirmed by confocal microscopy and transmission electron microscopy. The fact that the spatial distribution of matter can be controlled at such small length scales will provide access to unknown anisotropic materials. This type of nanocolloid may enable the design of multicomponent carriers for drug delivery, molecular imaging or guided self-assembly.     

Polymerization-Induced Self-Assembly: An Emerging Tool for Generating Polymer-Based Biohybrid Nanostructures

The combination of biomolecules and synthetic polymers provides an easy access to utilize advantages from both the synthetic world and nature. This is not only important for the development of novel innovative materials, but also promotes the application of biomolecules in various fields including medicine, catalysis, and water treatment, etc. Due to the rapid progress in synthesis strategies for polymer nanomaterials and deepened understanding of biomolecules’ structures and functions, the construction of advanced polymer-based biohybrid nanostructures (PBBNs) becomes prospective and attainable. Polymerization-induced self-assembly (PISA), as an efficient and versatile technique in obtaining polymeric nano-objects at high concentrations, has demonstrated to be an attractive alternative to existing self-assembly procedures. Those advantages induce the focus on the fabrication of PBBNs via the PISA technique. In this review, current preparation strategies are illustrated based on the PISA technique for achieving various PBBNs, including grafting-from and grafting-through methods, as well as encapsulation of biomolecules during and subsequent to the PISA process. Finally, advantages and drawbacks are discussed in the fabrication of PBBNs via the PISA technique and obstacles are identified that need to be overcome to enable commercial application.     

Nanoscale transport enables active self-assembly of millimeter-scale wires

Active self-assembly processes exploit an energy source to accelerate the movement of building blocks and intermediate structures and modify their interactions. A model system is the assembly of biotinylated microtubules partially coated with streptavidin into linear bundles as they glide on a surface coated with kinesin motor proteins. By tuning the assembly conditions, microtubule bundles with near millimeter length are created, demonstrating that active self-assembly is beneficial if components are too large for diffusive self-assembly but too small for robotic assembly.