A single‐cell‐gap transflective blue‐phase liquid crystal display based on fringe in‐plane switching electrodes

A transflective blue‐phase liquid crystal display (TRBP‐LCD) based on fringe in‐plane switching (FIS) electrodes is proposed. The proposed structure generates combined fringe and in‐plane electric fields that cause more liquid crystal (LC) molecules to reorient almost in plane above and between the pixel electrodes. The fringe field is mainly generated in the transmissive (T) region, and the horizontal electric field is mainly generated in the reflective (R) region. By optimizing the width of the pixel electrodes and the gap between two adjacent pixel electrodes, the different electric field intensity in the T and R regions contribute to balance the optical phase retardation between the T and R regions. As a result, the proposed TRBP‐LCD exhibits a low operating voltage and high optical efficiency, while it preserves a relatively simple fabrication process.     

Simulation study of single‐cell‐gap transflective liquid crystal display with nonuniform potential

A single‐cell‐gap transflective liquid crystal display with a nonuniform electric potential is demonstrated. The top substrate has a top planar common electrode, a transparent dielectric layer with a general dielectric constant is coated on the bottom substrate, and two planar pixel electrodes with the same size are coated on the dielectric layer and the bottom substrate, respectively. With the different gaps between the two planar pixel electrodes and top planar pixel electrode, the nonuniform electric potential from the transmissive region (T region) to the reflective region (R region) is generated, while a bumpy reflector is coated under the bottom substrate. In this device, with the dielectric layer, the pixel and common electrodes generate a strong electric potential in the T region and a relatively weak electric potential in the R region. Consequently, the T and R regions accumulate the same optical phase retardation. The simulation results show that the display exhibits reasonably low operating voltage, high optical efficiency, and well‐matched voltage‐dependent transmittance and reflectance curves. Besides, the fabrication process and the driving mode of the transflective liquid crystal display are relatively simple, and it is suitable for mobile applications.     

Low‐voltage and high‐transmittance blue‐phase liquid‐crystal device with slanted electrodes

Abstract— A low‐voltage (～10 V_rms) and high‐transmittance (～90%) polymer‐stabilized blue‐phase liquid‐crystal (BPLC) device with a slanted‐electrodes structure is proposed. Unlike the vertical‐field‐switching (VFS) mode in which oblique incident light and a vertical field are employed, the proposed device utilizes normal incident light and an oblique field. The slanted electrodes generate a strong and uniform oblique electric field, which contributes in obtaining low voltage and high transmittance. Moreover, no couple films or prism sheets are needed, which helps to enhance the optical efficiency and simplify of the device structure. This device has great potential application for emerging BPLC displays and photonic devices.     

Key design issues for autostereoscopic 2‐D/3‐D displays

Abstract— Flat‐panel 2‐D/3‐D autostereoscopic displays are now being commercialized in a variety of applications, each with its own particular requirements. The autostereoscopic display designer has two key considerations to address in order to meet customer needs — the optical output of the display (defined by the output window structure) and the choice of optical components. Window structure determines 3‐D image resolution, achievable lateral and longitudinal viewing freedom, crosstalk, and 3‐D fringe contrast. Optical‐component selection determines the quality of the imaging of such windows, viewing distances, device ruggedness, thickness, and brightness. Trade‐offs in window design are described, and a comparison of the leading optical component technologies is given. Selection of Polarisation Activated Microlenses? architectures for LCD and OLED applications are described. The technology delivers significant advantages particularly for minimising nominal viewing distances in high pixel density panels and optimizing device ruggedness while maintaining display brightness.     

Bistable nano‐structured photoalignment surface by nanoimprint lithography

A novel nano‐structured photoalignment surface is proposed and demonstrated. Such alignment surface has bistable azimuthal alignment directions for the liquid crystal molecules. The new alignment surface has a structure of stacking a photo‐polymerizable photoalignment polymer on top of a nano‐sized groove surface. The photoalignment polymer and groove surface have different azimuthal alignment directions but the same azimuthal anchoring energies. The fabrication of the nano‐sized groove is based on nano‐imprint lithography. Hence, the size and depth are controllable, where no random process is involved. The alignment surface is robust, stable, reliable, reproducible and suitable for mass manufacturing. Such alignment surface can be applied to fabricate a π/2 bistable twisted nematic (π/2‐BTN) display which has better optical performances than the traditional π‐BTN display.     

Improvement of off‐axis color shift on hybrid viewing‐angle device using dual γ‐voltage method

We have mass production on one kind of liquid crystal display (LCD) device with hybrid viewing‐angle (HVA), which can be switched between the wide viewing‐angle (WVA) and narrow viewing‐angle (NVA) by one button. This device adopts the single cell design that with lower cost, and utilizes the optical properties of electrically tilted LC to achieve the function of NVA display. An issue has received less attention in the past and been indeed found in the production process. It is that the off‐axis color shift will appear in NVA mode. We put forward one method to improve this issue here, which is combined with the concepts of Gray Frame Insertion (GFI) and Impulse‐type driving. By switching the voltage between two different γ values, the color shift will be perfected on the produce.     

A dual‐cell‐gap transflective liquid‐crystal display with identical response time in transmissive and reflective regions

Abstract— A dual‐cell‐gap transflective liquid‐crystal display (TR‐LCD) with identical response time in both the transmissive and reflective regions is demonstrated. In the transmissive region, strong anchoring energy is used to decrease the response time, while in the reflective region, weak anchoring energy is used to increase the response time. And overdrive voltage technology is adopted to make the response time identical in both the transmissive and reflective regions. The device structure and operating principle of the TR‐LCD was analyzed, the anchoring energy in the transmissive and reflective regions was designed, and the response time and electro‐optic characteristics of the TR‐LCD was calculated. The simulated dual‐cell‐gap TR‐LCD demonstrated good performances.     

A single‐cell‐gap transflective liquid‐crystal display using different pretilt angles in transmissive and reflective regions

Abstract— A single‐cel l‐gap transflective liquid‐crystal display with two types of liquid‐crystal alignment based on an in‐plane‐switching structure is proposed. The transmissive region is almost homeotropically aligned with the rubbed surfaces at parallel directions while the reflective region has a homeotropic liquid‐crystal alignment. For every driving voltage for a positive‐dielectric‐anisotropy nematic liquid crystal, the effective cell‐retardation value in the transmissive region becomes larger than that in the reflective region because of optical compensation film which is generated by low‐pretilt‐angle liquid crystal in the transmissive region. Under the optimization of the liquid‐crystal cell and alignment used in the transmissive and reflective areas, the transmissive and reflective parts have similar gamma curves. An identical response time in both the transmissive and reflective regions and a desirable viewing angle for personal portable displays can also be obtained.     

Low voltage fast response display using dual π‐cells with quarter‐wave thickness

In this paper, a design for a fast response display consisting of dual π‐cells is investigated. The thickness of each liquid crystal cell layer is only half of a single LC cell device with the same retardation change, which results in about one quarter of the response time for a single π‐cell device. While this result is obviously anticipated, an additional advantage is that a good viewing angle can be achieved by using negative C plates, which allows a lower cost device with a more uniform black state across the area of the display than the case of a single cell compensated by a discotic compensator. We also propose a solution to solve parallax issue from two‐layer structure of liquid crystal cell, and it opens a window of opportunity for a device with two‐layer structure.     

Multi‐view 3‐D display employing a flat‐panel display with slanted pixel arrangement

Abstract— A flat‐panel display with a slanted subpixel arrangement has been developed for a multi‐view three‐dimensional (3‐D) display. A set of 3M × N subpixels (M × N subpixels for each R, G, and B color) corresponds to one of the cylindrical lenses, which constitutes a lenticular lens, to construct each 3‐D pixel of a multi‐view display that offers M × N views. Subpixels of the same color in each 3‐D pixel have different horizontal positions, and the R, G, and B subpixels are repeated in the horizontal direction. In addition, the ray‐emitting areas of the subpixels within a 3‐D pixel are continuous in the horizontal direction for each color. One of the vertical edges of each subpixel has the same horizontal position as the opposite vertical edge of another subpixel of the same color. Cross‐talk among viewing zones is theoretically zero. This structure is suitable for providing a large number of views. A liquid‐crystal panel having this slanted subpixel arrangement was fabricated to construct a mobile 3‐D display with 16 views and a 3‐D resolution of 256 × 192. A 3‐D pixel is comprised of 12 × 4 subpixels (M = 4 and N = 4). The screen size was 2.57 in.     

Digital‐to‐analog converter with gamma correction on glass substrate for TFT‐panel applications

Abstract— Low‐temperature polysilicon (LTPS) technology has a tendency towards integrating all circuits on glass substrate. However, the poly‐Si TFTs suffered poor uniformity with large variations in the device characteristics due to a narrow laser process window for producing large‐grained poly‐Si TFTs. The device variation is a serious problem for circuit realization on the LCD panel, so how to design reliable on‐panel circuits is a challenge for system‐on‐panel (SOP) applications. In this work, a 6‐bit R‐string digital‐to‐analog converter (DAC) with gamma correction on glass substrate for TFT‐panel applications is proposed. The proposed circuit, which is composed of a folded R‐string circuit, a segmented digital decoder, and reordering of the decoding circuit, has been designed and fabricated in a 3‐μm LTPS technology. The area of the new proposed DAC circuit is effectively reduced to about one‐sixth compared to that of the conventional circuit for the same LTPS process.     

High‐quality direct‐view display combining multiple integral 3D images

This paper proposes a method for combining multiple integral three‐dimensional (3D) images using direct‐view displays to obtain high‐quality results. A multi‐image combining optical system (MICOS) is used to enlarge and combine multiple integral 3D images without gaps. An optical design with a simple lens configuration that does not require a diffuser plate prevents the deterioration in resolution resulting from lens arrangement errors and the diffuser plate. An experiment was performed to compare a previously developed method with the proposed method, and the latter showed a significant improvement in image quality. A method for expanding the effective viewing angle of the proposed optical design was also developed, and its effectiveness was confirmed experimentally. A prototype device of the proposed optical design was constructed using a high‐density organic light‐emitting diode (OLED) panel with 8K resolution and 1058 ppi pixel density to achieve 311 (H) × 175 (V) elemental images, a viewing angle of 20.6° in both the horizontal and vertical directions, and a display size of 9.1 in. In addition, the proposed optical design enabled making device considerably thinner, ie, with a thickness of only 47 mm.     

Transflective ferroelectric liquid‐crystal display with a single‐cell gap

Abstract— A ferroelectric liquid‐crystal (FLC) display was optimized as a transflective liquid‐crystal display (LCD). In this configuration, the single‐cell‐gap approach was considered. The optimized configuration exhibits a high contrast ratio, wide viewing angles, and achromatic (black/white) switching in both the transmissive and reflective modes. Because no double‐cell‐gap structure, no subpixel separation, and no patterning polarizers and retarders are included in the configuration, the configuration is easy to fabricate and also possess a perfect dark state. This configuration is also suitable for bistable applications.     

Optical characterization and ergonomical factors of near‐to‐eye displays

Abstract— Near‐to‐eye displays (NEDs) have unique optical properties requiring different characterization techniques compared to direct‐view display measurements. Here, a new version of a NED measurement system is introduced, and optical measurements of five commercially available consumer NED products are discussed. Luminance, focal distance, qualified viewing space, angular properties, and interocular differences are among the values. In addition, these results are compared to extensive subjective studies. The main intention is not to benchmark between the different products, but to show that display measurements are important for NEDs. According to the results, the determination of NED's characteristics helps to predict the subjective experiences, but the nature of the relation between subjective and objective findings is rather complex and depends on several NED‐, user‐, and task‐related features. Measured characteristics indicate that with a conventional biocular NED system approach of using two microdisplays and their enlarging optics, it is a design and a manufacturing challenge to build an ergonomically satisfactory NED device that fits everyone.     

High‐transmittance in‐plane switching liquid crystal display device driven by three‐level voltages

We propose a single‐layered electrode structure using three voltage levels instead of two to achieve high transmittance in an in‐plane switching liquid crystal display device. The proposed structure consists of two pixel electrodes and one common electrode. By using three voltage levels, we can generate an in‐plane electric field higher than that in a conventional in‐plane switching device. We confirmed that by using the proposed structure, the transmittance of a liquid crystal device can be increased from 29% to 35% at a slightly lower operating voltage without using the double‐layered electrode structure required for the fringe‐field switching mode. The transmittance of the proposed device is higher than that of the fringe‐field switching device.     

A continuous‐viewing‐angle‐controllable liquid‐crystal display using a blue‐phase liquid crystal

Abstract— A continuous‐viewing‐angle‐controllable liquid‐crystal display (LCD) using a blue‐phase liquid crystal is proposed. To realize both wide‐viewing‐angle (WVA) mode and narrow‐viewing‐angle (NVA) mode with a single liquid‐crystal panel, each pixel is divided into a main pixel and a subpixel. The main pixel is for displaying images in both modes. The subpixel is for displaying images in WVA mode and controlling the viewing angle in NVA mode. The device exhibits a good viewing‐angle‐controlling characteristic and high transmittance.     

Color‐by‐Blue: A novel method to achieve full‐color inorganic EL displays

Abstract— A new method for achieving full‐color capability for inorganic EL displays was developed, which combines electroluminescence with photoluminescence phenomena in the same device structure. In this display panel, the blue emission was obtained from the EL device by using the Eu‐doped barium thioaluminate phosphor material system, which was then used to generate green and red emission by the use of down‐conversion materials. The major advantages of the Color‐by‐Blue method (CBB) are the elimination of color‐balance control issues associated with the use of different electroluminescent phosphor materials for red, green, and blue with potentially different threshold voltages for the onset of luminance and the achievement of a low‐cost high‐yield manufacturing process.     

Low‐cost wearable low‐vision aid using a handmade retinal light‐scanning microdisplay

Abstract— The Wearable Low Vision Aid (WLVA) is a portable system that uses machine vision to track potential walking hazards for the visually impaired. A scanning fiber display couples a laser diode to a vibrating optical fiber that projects a virtual image onto the retina to display warning icons that the visually impaired can recognize. Initial low‐vision subject testing has given promising results for this low‐cost assistive device.     

Invited Paper: Depth reproducibility of multiview depth‐fused 3‐D display

Abstract— A multi‐view depth‐fused 3‐D (DFD) display that provides smooth motion parallax for wide viewing angles is proposed. A conventional DFD display consists of a stack of two transparent emitting screens. It can produce motion parallax for small changes in observation angle, but its viewing zone is rather narrow due to the split images it provides in inclined views. On the other hand, even though multi‐view 3‐D displays have a wide viewing angle, motion parallax in them is discrete, depending on the number of views they show. By applying a stacked structure to multi‐view 3‐D displays, a wide‐viewing‐angle 3‐D display with smooth motion parallax was fabricated. Experimental results confirmed the viewing‐zone connection of DFD displays while the calculated results show the feasibility of stacked multi‐view displays.     

Optimal design of optical performance of reflective ferroelectric‐ and anti‐ferroelectric liquid‐crystal displays

Abstract— In an in‐plane optical geometry, such that the average optic axis lies on the plane parallel to both substrates, the optical properties of a reflective ferroelectric liquid‐crystal (FLC) or antiferroelectric liquid‐crystal (AFLC) cell were studied within the framework of the 2 × 2 Jones matrix formalism. To obtain good achromaticity and high brightness, the cell parameters such as the molecular rotation angle and the effective phase retardation of the AFLC layer were optimized. The device performances of the AFLC cell were experimentally demonstrated in this geometry.