High‐performance white OLEDs with high color‐rendering index for next‐generation solid‐state lighting

Abstract— Several white‐OLED structures with a high color‐rendering index (CRI) were investigated for lighting applications. A two‐unit fluorescent/phosphorescent hybrid white OLED achieved an excellent CRI of 95, high luminous efficacy of 37 lm/W, and long lifetime of over 40,000 hours at 1000 cd/m². White‐OLED lighting panels of 8 × 8 cm for high‐luminance operation were fabricated, and a stable emission at 3000 cd/m² was confirmed. Quite a small variation in chromaticity in a different directions was achieved by using an optimized optical device structure. With a light‐outcoupling substrate, a higher efficacy of 56 lm/W, high CRI of 91, and longer half‐decay lifetime of over 150,000 hours at 1000 cd/m² was achieved. All‐phosphorescent white OLEDs placed on the light‐outcoupling substrate show a high CRI of 85 and higher efficacy of 65 lm/W with a fairly good half‐decay lifetime of over 30,000 hours. With a further voltage reduction and a high‐index spherical extractor, 128 lm/W at 1000 cd/m² has been achieved.     

Red‐phosphorescent OLEDs employing bis(8‐quinolinolato)phenolato‐aluminum(III) complexes as emission‐layer hosts

Abstract— We have used bis(8‐quinolinolato)phenolato‐aluminum complexes as emission‐layer hosts in red‐phosphorescent OLED devices. This enabled high‐efficiency long‐lived OLED devices with a simple device structure that does not require a hole‐blocking layer. Devices with a red‐phosphorescent dopant introduced into a noble bis(8‐quinolinolato)phenolato‐aluminum complex exhibited a high efficiency of 12 cd/A at CIE color coordinates (0.65, 035) and a long operating lifetime of 30,000 hours or more at an initial luminance of 700 cd/m². Moreover, triplet‐triplet annihilation was reduced in the devices because of the wide emission zone enabled by the complex and the short phosphorescent lifetime of the red‐phosphorescent dopant. We have successfully incorporated these red‐phosphorescent devices into commercial OLED displays.     

High‐efficiency red‐phosphorescent organic light‐emitting diode with the organic structure of 2‐TNATA/Bebq2:SFC‐411/SFC‐137

Abstract— High‐efficiency and simple‐structured red‐emitting phosphorescent devices based on the hole‐injection layer of 4,4′,4″‐tris(2‐naphthylphenyl‐phenylamino)‐triphenylamine [2‐TNATA] and the emissive layer of bis(10‐hydroxybenzo[h] quinolinato)beryllium complex [Bebq²] doped with SFC‐411 (proprietary red phosphorescent dye) have been researched. The fabricated devices are divided into three types depending on whether or not the hole‐transport layer of N,N′‐bis(1 ‐naphthyl)‐N, N'‐diphenyl‐1,1′‐biphenyl‐4,4′‐diamine [NPB] or the electron‐transport layer of SFC‐137 (proprietary electron transporting material) is included. Among the experimental devices, the best electroluminescent characteristics were obtained for the device with an emission structure of 2‐TNATA/Bebq²:SFC‐411/SFC‐137. In this device, current density and luminance were found to be 200 mA/cm² and 15,000 cd/m² at an applied voltage of 7 V, respectively. Current efficiencies were 15 and 11.6 cd/A under a luminance of 500 and 5000 cd/m². The peak wavelength in the electroluminescent spectral distribution and color coordinates on the Commission Internationale de I'Eclairage (CIE) chart were 628 nm and (0.67, 0.33), respectively.     

Printable phosphorescent organic light‐emitting devices

Abstract— A new approach to full‐color printable phosphorescent organic light‐emitting devices (P²OLEDs) is reported. Unlike conventional solution‐processed OLEDs that contain conjugated polymers in the emissive layer, the P²OLED's emissive layer consists of small‐molecule materials. A red P²OLED that exhibits a luminous efficiency of 11.6 cd/A and a projected lifetime of 100,000 hours from an initial luminance of 500 cd/m², a green P²OLED with a luminous efficiency of 34 cd/A and a projected lifetime of 63,000 hours from an initial luminance of 1000 cd/m², a light‐blue P²OLED with a luminous efficiency of 19 cd/A and a projected lifetime 6000 hours from an initial luminance of 500 cd/m², and a blue P²OLED with a luminous efficiency of 6.2 cd/A and a projected lifetime of 1000 hours from an initial luminance of 500 cd/m² is presented.     

Fluorescent‐based tandem white OLEDs designed for display and solid‐state‐lighting applications

Abstract— Highly efficient tandem white OLEDs based on fluorescent materials were developed for display and solid‐state‐lighting (SSL) applications. In both cases, the white OLED must have high power efficiency and long lifetime, but there are a number of attributes unique to each application that also must be considered. Tandem OLED technology has been demonstrated as an effective approach to increase luminance, extend OLED lifetime, and allow for use of different emitters in the individual stacks for tuning the emission spectrum to achieve desired performance. Here, examples of bottom‐emission tandem white OLEDs based on small‐molecule fluorescent emitters designed for displays and for SSL applications are reported. A two‐stack tandem white OLED designed for display applications achieved 36.5‐cd/A luminance efficiency, 8500K color temperature, and lifetime estimated to exceed 50,000 hours at 1000 cd/m². This performance is expected to meet the specifications for large AMOLED displays. A two‐stack tandem white OLED designed for SSL applications achieved 20‐lm/W power efficiency, 38‐cd/A luminance efficiency, 3500K color temperature, and lifetime estimated to exceed 140,000 hours at 1000 cd/m². With the use of proven light‐extraction techniques, it is estimated that this tandem device will exceed 40 lm/W with more than 500,000‐hour lifetime, performance that should be sufficient for first‐generation lighting products.     

Ink‐jet‐printable phosphorescent organic light‐emitting‐diode devices

Abstract— A novel method for the fabrication of ink‐jet‐printed organic light‐emitting‐diode devices is discussed. Unlike previously reported solution‐processed OLED devices, the emissive layer of OLED devices reported here does not contain polymeric materials. The emission of the ink‐jet‐printed P²OLED (IJ‐P²OLED) device is demonstrated for the first time. It shows good color and uniform emission although it uses small‐molecule solution. Ink‐jet‐printed green P²OLED devices possess a high luminous efficiency of 22 cd/A at 2000 cd/m² and is based on phosphorescent emission. The latest solution‐processed phosphorescent OLED performance by spin‐coating is disclosed. The red P²OLED exhibits a projected LT50 of >53,000 hours with a luminous efficiency of 9 cd/A at 500 cd/m². The green P²OLED shows a projected LT50 of >52,000 hours with a luminous efficiency of 35 cd/A at 1000 cd/m². Also discussed is a newly developed sky‐blue P²OLED with a projected LT50 of >3000 hour and a luminous efficiency of 18 cd/A at 500 cd/m².     

Highly efficient white organic light‐emitting diodes with over 100 lm/W for next‐generation solid‐state lighting

High‐performance two‐unit all‐phosphorescent white devices on a built‐up light extraction substrate that comprised high‐index materials were studied. As a result of suitable optical and electrical design, the device showed an extremely high efficacy of 114 lm/W at 1000 cd/m². The device also showed 102 lm/W with long lifetime (LT70) of over 10,000 h at 3000 cd/m². Outstanding external quantum efficiency of almost 50% was also achieved in a flat panel with an emissive area of 25 cm². Color coordinates of the panel met the Energy Star ® criteria of solid‐state lighting with CIE (Commission Internationale de l'Éclairage) 1931 (x, y) = (0.477, 0.423), and the color rendering index was 81.     

White stacked OLED with 38 lm/W and 100,000‐hour lifetime at 1000 cd/m2 for display and lighting applications

Abstract— The three critical parameters in determining the commercial success of organic light‐emitting diodes (OLEDs), both in display and lighting applications, are power efficiency, lifetime, and price competitiveness. PIN technology is widely considered as the preferred way to maximize power efficiency and lifetime. Here, a high‐efficiency and long‐lifetime white‐light‐emitting diode, which has been realized by stacking a blue‐fluorescent emission unit together with green‐ and red‐phosphorescent emission units, is reported. Proprietary materials have been used in transport layers of each emission unit, which significantly improves the power efficiency and stability. The power efficiency at 1000 cd/m² is 38 lm/W with CIE color coordinates of (0.43, 0.44) and a color‐rendering index (CRI) of 90. An extrapolated lifetime at an initial luminance of 1000 cd/m² is above 100,000 hours, which fulfils the specifications for most applications. The emission color can also be easily tuned towards the equal‐energy white for display applications by selecting emitting materials and varying the transport‐layer cavities.     

Phosphorescent OLEDs: Enabling energy‐efficient lighting with improved uniformity and longer lifetime

Abstract— In this paper, the design criteria for scaling up from small‐area organic light‐emitting‐diode (OLED) pixels to large‐area OLED light panels is described. Particular focus is placed on using phosphorescent OLEDs (PHOLEDs) to maximize panel efficacy and uniformity and minimize operating temperature. Data for a pair of all‐phosphorescent 15 × 15 cm OLED light panels are also presented: Panel 1 has 62‐lm/W efficacy, CRI = 81, CCT = 3180K, and lifetime to LT70 = 18,000 hours at 1000 cd/m² and Panel 2 has 58‐lm/W efficacy, CRI = 82, CCT = 2640K, and lifetime to LT70 = 30,000 hours at 1000 cd/m². Operating at a 3000 cd/m² (7740 lm/m²), Panel 2 has 49‐lm/W efficacy with lifetime to LT70 = 4000 hours. Excellent panel lifetime is enabled by a stable light‐blue phosphorescent materials system and by the use of efficient phosphorescent emitters that ensure very low panel temperature without any additional thermal management.     

Solution‐processable double‐layered ionic p‐i‐n organic light‐emitting diodes

Abstract— Solution‐processed double‐layered ionic p‐i‐n organic light‐emitting diodes (OLEDs), comprised of an emitting material layer doped with an organometallic green phosphor and a photo‐cross‐linked hole‐transporting layer doped with photo‐initiator is reported. The fabricated OLEDs were annealed using simultaneous thermal and electrical treatments to form a double‐layered ionic p‐i‐n structure. As a result, an annealed double‐layered OLED with a peak brightness over 20,000 cd/m² (20 V, 390 mA/cm²) and a peak efficiency of 15 cd/A (6 V, 210 cd/m²) was achieved.     

OLED‐based pico‐projection system

Abstract— Two pico‐projection systems, a monochrome green and a full‐color system, based on high‐efficiency OLED microdisplays (VGA; pixel size, 12 μm) are presented. Both optical systems are described by a numerical aperture of about 0.3, a magnification of 15x, and a working distance of 300–360 mm. The frequency limit of both systems is 42 cycles/mm at an image contrast of about 60%. The monochrome projection system with a volume smaller than 10 cm³ consists of one green OLED and a projection lens with five elements. The measured luminance in the image plane is about 0.061 lm. The image has a diagonal of 150 mm with a working distance of about 300 mm and has a considerable image contrast of 396:1. The second system combines three high‐brightness OLEDs, red, green, and blue colored, together with a projection lens and an image‐combining element, and an X‐Cube to achieve full‐color projection. The estimated luminance value for the three‐panel projection unit with an OLED luminance of 10,000 cd/m² for each display will be about Φcalculated = 0.147 lm. In this paper, the system concepts, the optical designs, and the realized prototypes of the monochrome and full‐color projection system are presented.     

Surface‐light‐emitting transistors based on vertical‐type metal‐base organic transistors

Abstract— Light‐emitting transistors having a metal‐base organic transistor (MBOT) structure demonstrate both the function of an organic thin‐film transistor (OTFT) and organic light‐emitting diode (OLED). The MBOT is a vertical‐type organic transistor having a simple structure composed of organic/metal/organic layers demonstrating high‐current and low‐voltage operation. The light‐emitting MBOT was fabricated simply by inserting additional layers of hole‐transporting and emissive materials used in the OLED into the col lector layer. The device showed perfect surface emission similar to an OLED. A luminance modulation of 370 cd/m² was observed at a collector voltage of 20 V and a base voltage of 3 V. This device can be applied to an OLED display device to increase the numerical aperture or reduce the required current of the TFT backplane.     

The role of LiF buffer layer in tris‐(8‐hydroxyquinoline) aluminum‐based organic light‐emitting devices with Mg:Ag cathode

Abstract— The device characteristics of organic light‐emitting devices based on tris‐(8‐hydroxyqunoline) aluminum with a thin layer of LiF inserted at the ITO and organic interface or organic and Mg:Ag cathode interface were investigated. A thin layer of LiF can enhance the electron injection when it was inserted only between the organic electron‐transporting layer and the Mg:Ag alloy cathode, but can block hole injection when inserted between the ITO anode and the organic hole‐transport layer. By inserting both a 1.0‐nm LiF layer at side of the ITO anode and a 0.5‐nm LiF layer under the Mg:Ag cathode, the device, at a current injection of 10 mA/cm², exhibited the highest current efficiency of 8.2 cd/A and power efficiency of 1.93 lm/W for all the types of devices investigated in this study. Both the current efficiency and power efficiency of the device were improved by 1.2 times at a current injection of 10 mA/cm², compared to the standard device without any LiF buffer layer. This is due to the increased electron injection and decreased hole injection that off‐sets the imbalance of electron and hole injection and brings it towards the balanced injection of electrons and holes, thus reducing the non‐productive hole current.     

Inorganic EL devices with high‐performance blue phosphor and application to 34‐in. flat‐panel televisions

Abstract— A high‐performance inorganic electroluminescence (EL) device has been successfully developed by using an EL structure with a thick dielectric layer (TDEL) and sputtered BaAl₂S₄:Eu blue phosphor. The luminance and efficacy were higher than 2300 cd/m² and 2.5 lm/W at L⁶⁰, 120 Hz, respectively. Furthermore, the luminance at L⁶⁰, 1.2 kHz was more than 23,000 cd/m². The phosphor layer has a single‐phase and a highly oriented crystalline structure. The phosphor also shows high stability in air. A 34‐in. high‐definition television (HDTV) has been developed by combining a TDEL structure and color‐conversion materials. The panels with an optimized color filter demonstrated a peak luminance of 350 cd/m², a color gamut of more than 100% NTSC, and a wide viewing angle similar to that of plasma‐display panels. The high reproducibility of the 34‐in. panels using our pilot line has been confirmed.     

Characteristics of a high‐Xe‐concentration 4‐in. PDP

The performance of two 4‐in. color PDP test panels with a default and a high‐Xe‐concentration gas mixture will be discussed. The default panel with a gas mixture of 3.5% Xe in Ne and a filling pressure of 665 hPa was compared with a panel containing a gas mixture of 13.5% Xe in Ne and a filling pressure of 800 hPa. The panels contain a green phosphor, YBO₃:Tb, which showed less saturation at high UV load compared with a Willemite phosphor. The panel performance was compared in addressed conditions. For the default panel, a white luminance of 710 cd/m² and an efficacy of 1.6 lm/W was found, while for the high‐Xe‐partial‐pressure panel, a white luminance of 2010 cd/m² and an efficacy of 3.8 lm/W was realized. The increase of the driving voltages, about 20–30 V, is moderate. Finally, color saturation is improved at high Xe partial pressure.     

Highly efficient blue organic light‐emitting diode with high color purity using 4,4′‐N,N′‐dicarbazole‐biphyenyl (CBP) doped with 1,4‐bis[2‐(3‐N‐ethylcarbazoryl) vinyl]benzene (BCzVB)

Abstract— An efficient pure blue multilayer organic light‐emitting diode employing 1,4‐bis[2‐(3‐N‐ethylcarbazoryl)vinyl]benzene (BCzVB) doped into 4,4′‐N,N′‐dicarbazole‐biphyenyl (CBP) is reported. The device structure is ITO (indium tin oxide)/TPD (N,N′‐diphenyl‐N,N′‐bis (3‐methylphenyl)‐1,1′biphenyl‐4,4′diamine)/CBP:BCzVB/Alq₃ (tris‐(8‐hydroxy‐quinolinato) aluminum)/Liq (8‐hydroxy‐quinolinato lithium)/Al; here TPD was used as the hole‐transporting layer, CBP as the blue‐emitting host, BCzVB as the blue dopant, Alq₃ as the electron‐transporting layer, Liq as the electron‐injection layer, and Al as the cathode, respectively. A maximum luminance of 8500 cd/m² and a device efficiency of 3.5 cd/A were achieved. The CIE co‐ordinates were x = 0.15, y = 0.16. The electroluminescent spectra reveal a dominant peak at 448 nm and additional peaks at 476 nm with a full width at half maximum of 60 nm. The Föster energy transfer and, especially, carrier trapping models were considered to be the main mechanism for exciton formation on BCzVB molecules under electrical excitation.     

Development of a phosphorescent white OLED with extremely high power efficiency and long lifetime

Abstract— A white OLED device with extremely high power efficiency and long lifetime was developed, in which blue, yellow‐green, and red phosphorescent emitters were used. The performances achieved were 64 lm/W and 10,000 hours of lifetime at an initial luminance of 1000 cd/m² by using a light outcoupling technique. The device also exhibited the good durability important for practical usage. New technologies, such as blue phosphorescent materials and a sophisticated organic layer structure, were applied to the device. Hopefully, these technologies will open the door to the practical use of OLEDs as light sources.     

Improved performance of organic light‐emitting devices with ultra‐thin hole‐blocking layers

Abstract— Tris‐(8‐hydroxyqunoline) aluminum (Alq₃)‐based organic light‐emitting devices (OLEDs) using different thickness of 2,9‐Dimethyl‐4,7‐diphenyl‐1,110‐phenanthorline (BCP) as a hole‐blocking layer inserted both in the electron‐ and hole‐transport layers have been fabricated. The devices have a configuration of indium tin oxide (ITO)/m‐MTDATA (80 nm)/BCP (X nm)/NPB (20 nm)/Alq₃ (40 nm)/BCP (X nm)/Alq₃ (60 nm)/Mg: Ag (200 nm), where m‐MTDATA is 4, 4′, 4″‐Tris(N‐3‐methylphenyl‐N‐phenyl‐amino) triphenylamine, which is used to improve hole injection and NPB is N,N′‐Di(naphth‐2‐yl)‐N,N′‐diphenyl‐benzidine. X varies between 0 and 2 nm. For a device with an optimal thickness of 1‐nm BCP, the current and power efficiencies were significantly improved by 47% and 43%, respectively, compared to that of a standard device without a BCP layer. The improved efficiencies are due to a good balance between the electron and hole injection, exciton formation, and confinement within the luminescent region. Based on the optimal device mentioned above, the NPB layer thickness influences the properties of the OLEDs.     

High‐Xe‐content high‐efficacy PDPs

Abstract— The trade‐off between PDP efficacy improvement and driving voltages was investigated for several design factors. It was found that for a proper combination of an increased Xe content, cell design, and the use of a TiO₂ layer combined with “non‐saturating” phosphors, a large increase in both efficacy and luminance can be realized at moderately increased drive voltages. In a 4‐in. color test panel, a white efficacy of 5 lm/W and a luminance of 5000 cd/m² was obtained for sustaining at 260 V in addressed condition.     

Preparation and characterization of highly efficient blue TPBI:FIrpic organic light‐emitting devices

Abstract— Blue phosphorescent organic light‐emitting devices (PhOLEDs) using 1,3,5‐tris(N‐phenyl‐ benzimiazole‐2‐yl)benzene [TPBI] as the host and bis((4,6‐difluorophenyl)‐pyridinate‐N,C2′)picolinate [FIrpic] as the dopant in the emitter were fabricated with different treatments of the hole‐transport layers and doping levels. Among the experimental devices, the best electroluminescent characteristics were obtained in the device with the combined hole‐transport layer of N,N′‐diphenyl‐N,N′‐bis‐[4‐ (phenyl‐m‐tolylamino)‐phenyl]‐biphenyl‐4,4′‐diamine [DNTPD]/1, 1‐bis‐(di‐4‐polyaminophen yl)‐ cyclo‐hexane [TAPC] and a doping level of 10‐vol.% FIrpic. The device with a structure of DNTPD/TAPC/TPBI:Firpic (10%) showed a luminance of 1300 cd/m² at an applied voltage of 10 V, a maximum current efficiency of 18 cd/A, and color coordinates of (0.17, 0.43) on the Commission Internationale de I'Eclairage (CIE) chart.