Optical characteristics of tandem and microcavity tandem organic light‐emitting devices

Abstract— In pursuit of the further enhancement of the luminance and efficiency of organic light‐emitting devices (OLEDs), it is worthy of exploring what benefits could be obtained by combining two luminance‐enhancement techniques, i.e., microcavity and tandem OLEDs. Furthermore, a deeper understanding of the optics in tandem OLEDs will be useful for the design and optimization of tandem OLEDs. In this paper, the optical characteristics of noncavity and microcavity tandem OLEDs are theoretically and experimentally investigated. By the use of rigorous electromagnetic modeling of OLEDs, the radiation characteristics of tandem OLEDs as a function of device structures are analyzed and correspondingly, the guidelines for optimizing the performance of tandem devices are suggested. By making use of the analytical results, it is shown that with well‐designed microcavity conditions and device structures, a five‐fold enhancement in luminance in the normal direction can be achieved with cavity‐tandem devices having only two emitting units. A very high efficiency of 200 cd/A for a rather broad brightness range of 100–4000 nits is demonstrated with a phosphorescent cavity two‐unit device.     

Improved performance of organic light‐emitting devices with ultra‐thin hole‐blocking layers

Abstract— Tris‐(8‐hydroxyqunoline) aluminum (Alq₃)‐based organic light‐emitting devices (OLEDs) using different thickness of 2,9‐Dimethyl‐4,7‐diphenyl‐1,110‐phenanthorline (BCP) as a hole‐blocking layer inserted both in the electron‐ and hole‐transport layers have been fabricated. The devices have a configuration of indium tin oxide (ITO)/m‐MTDATA (80 nm)/BCP (X nm)/NPB (20 nm)/Alq₃ (40 nm)/BCP (X nm)/Alq₃ (60 nm)/Mg: Ag (200 nm), where m‐MTDATA is 4, 4′, 4″‐Tris(N‐3‐methylphenyl‐N‐phenyl‐amino) triphenylamine, which is used to improve hole injection and NPB is N,N′‐Di(naphth‐2‐yl)‐N,N′‐diphenyl‐benzidine. X varies between 0 and 2 nm. For a device with an optimal thickness of 1‐nm BCP, the current and power efficiencies were significantly improved by 47% and 43%, respectively, compared to that of a standard device without a BCP layer. The improved efficiencies are due to a good balance between the electron and hole injection, exciton formation, and confinement within the luminescent region. Based on the optimal device mentioned above, the NPB layer thickness influences the properties of the OLEDs.     

Metal (IV) tetras (8‐hydroxyquinoline) (M = Zr,Hf) used as electroluminescent material and electron‐transport layer in OLEDs

Abstract— In this paper, we report on the utilization of zirconium (IV) tetras (8‐hydroxyquinoline), Zrq₄, and hafnium (IV) tetras (8‐hydroxyquinoline), Hfq₄, as an electroluminescent material in fluorescent organic light‐emitting diodes (OLED) and as electron transport layer (ETL) for high‐efficiency electrophosphorescent organic light‐emitting diodes (PHOLEDs). Structural studies show that the metal tetraquinolates (Mq₄) have a very low dipole moment (<0.1 D), in contrast to Alq₃ which has an estimated dipole moment of 4.7 D. Mobility measurements show that Mq₄ complexes give mobilities of (3.5 ± 0.5) × 10^?6 cm²/V‐sec, which are close to the values reported for Alq₃, i.e., (2.3–4.3) × 10^?6 cm²/V‐sec. OLEDs were prepared with the structure ITO/NPD (400 Å)/Mq_n (500 Å)/LiF/Al (NPD = 4‐4′‐bis[N‐(1‐naphthyl)‐N‐phenyl‐amino]bi phenyl, Mq_n = Alq₃, Zrq₄, Hfq₄. The Mq₄‐based OLEDs gave external efficiencies of 1.1%, while the Alq₃‐based devices of the same structure gave efficiencies of 0.7%. PHOLEDs have been fabricated with the structure ITO/NPD (500 Å)/CBP‐8% Ir(ppy)³ (250 Å)/BCP (150 Å)/Mq_n (250 Å)/LiF/Al (CBP = N,N′‐dicarbazolyl‐4‐4′‐biphenyl, Ir(ppy)³ = fac‐tris(2‐phenylpyrridine)iridium, BCP = bathocruprione). PHOLEDs with Mq₄ ETLs showed a greatly improved efficiency, when compared to Alq₃‐based PHOLEDs. The Zrq₄‐based PHOLEDs gave a peak external quantum efficiency of 14% at 0.3 mA/cm² (150 cd/m²), while the Hfq₄ based PHOLED gave a peak external quantum efficiency of 15% at 0.6 mA/cm² (300 cd/m²). Comparable PHOLEDs with an Alq₃ ETL give peak external quantum efficiencies of 8.0% at 0.5 mA/cm². The devices gave an electroluminescence (EL) spectrum consisting only of fac‐tris(2‐phenylpyrridine)iridium (Ir(ppy)³) dopant emission (CIE coordinates of 0.26, 0.66), with no Mq₄ emission observed at any bias level.     

Printable phosphorescent organic light‐emitting devices

Abstract— A new approach to full‐color printable phosphorescent organic light‐emitting devices (P²OLEDs) is reported. Unlike conventional solution‐processed OLEDs that contain conjugated polymers in the emissive layer, the P²OLED's emissive layer consists of small‐molecule materials. A red P²OLED that exhibits a luminous efficiency of 11.6 cd/A and a projected lifetime of 100,000 hours from an initial luminance of 500 cd/m², a green P²OLED with a luminous efficiency of 34 cd/A and a projected lifetime of 63,000 hours from an initial luminance of 1000 cd/m², a light‐blue P²OLED with a luminous efficiency of 19 cd/A and a projected lifetime 6000 hours from an initial luminance of 500 cd/m², and a blue P²OLED with a luminous efficiency of 6.2 cd/A and a projected lifetime of 1000 hours from an initial luminance of 500 cd/m² is presented.     

Inorganic EL devices with high‐performance blue phosphor and application to 34‐in. flat‐panel televisions

Abstract— A high‐performance inorganic electroluminescence (EL) device has been successfully developed by using an EL structure with a thick dielectric layer (TDEL) and sputtered BaAl₂S₄:Eu blue phosphor. The luminance and efficacy were higher than 2300 cd/m² and 2.5 lm/W at L⁶⁰, 120 Hz, respectively. Furthermore, the luminance at L⁶⁰, 1.2 kHz was more than 23,000 cd/m². The phosphor layer has a single‐phase and a highly oriented crystalline structure. The phosphor also shows high stability in air. A 34‐in. high‐definition television (HDTV) has been developed by combining a TDEL structure and color‐conversion materials. The panels with an optimized color filter demonstrated a peak luminance of 350 cd/m², a color gamut of more than 100% NTSC, and a wide viewing angle similar to that of plasma‐display panels. The high reproducibility of the 34‐in. panels using our pilot line has been confirmed.     

OLED‐based pico‐projection system

Abstract— Two pico‐projection systems, a monochrome green and a full‐color system, based on high‐efficiency OLED microdisplays (VGA; pixel size, 12 μm) are presented. Both optical systems are described by a numerical aperture of about 0.3, a magnification of 15x, and a working distance of 300–360 mm. The frequency limit of both systems is 42 cycles/mm at an image contrast of about 60%. The monochrome projection system with a volume smaller than 10 cm³ consists of one green OLED and a projection lens with five elements. The measured luminance in the image plane is about 0.061 lm. The image has a diagonal of 150 mm with a working distance of about 300 mm and has a considerable image contrast of 396:1. The second system combines three high‐brightness OLEDs, red, green, and blue colored, together with a projection lens and an image‐combining element, and an X‐Cube to achieve full‐color projection. The estimated luminance value for the three‐panel projection unit with an OLED luminance of 10,000 cd/m² for each display will be about Φcalculated = 0.147 lm. In this paper, the system concepts, the optical designs, and the realized prototypes of the monochrome and full‐color projection system are presented.     

Organic light‐emitting diodes with enhanced out‐coupling efficiency using high‐refractive‐index glass frit

We have fabricated a novel type of substrate for organic light‐emitting diodes (OLEDs) to improve the light out‐coupling efficiency. It was fabricated by forming an excellent flat layer using a high‐refractive‐index B₂O₃‐SiO₂‐Bi₂O₃ frit glass on the light diffusive glass substrate. By using this substrate, we have sufficiently reduced the total internal reflection of OLEDs, and we successfully obtained more than 1.9 times higher light out‐coupling efficiency without spectral changes and viewing angle dependency. Furthermore, we have also successfully demonstrated 50 × 50 mm large‐area white OLEDs with this novel substrate.     

Development of new high‐luminance green EL devices based on Eu‐doped calcium thioaluminate materials system

Abstract— A new green EL phosphor with excellent brightness, efficiency, and color saturation was developed. This phosphor is based on the europium‐activated calcium thioaluminate materials system. The performance of this phosphor is greatly enhanced by the addition of Gd as a co‐dopant. Similarly, the addition of ZnS layers on the top and bottom of the phosphor film improved the device luminance considerably. The luminance of the EL devices can be as high as 1700 cd/m² with CIE color coordinates (0.190, 0.645) which were tested by using 32‐μsec‐wide square pulses with a frequency of 120 Hz. The device efficiency was over 2 lm/W.     

The effect of transmittance and luminous efficiency with the application of cathode mesh mask in transparent organic light‐emitting devices

With the development of organic light‐emitting devices (OLEDs), the transparent OLED is also restricted by its efficiency and stability. Thus, in order to improve the transmittance and luminous efficiency of transparent OLED, the cathode mesh mask combined with Al:Ag alloy is adopted to prepare the cathode of transparent OLED, which would enhanced the luminance, efficiency, and transmittance of the device. With the same driving voltage, the device has the highest brightness, when the cathode thickness is 85 nm. At the voltage of 13 and 14 V, the luminance, for bottom‐emission and top‐emission, is 9501 cd/m² and 1840 cd/m², respectively. The entire transmittance of the device has achieved about 78% at a 480 nm wavelength.     

Analyzing and tuning emission characteristics of top‐emitting organic light‐emitting devices

Abstract— Top‐emitting organic light‐emitting devices (OLEDs) have several technical merits for application in active‐matrix OLED displays. Generally, stronger microcavity effects inherent with top‐emitting OLEDs, however, complicate the optimization of device efficiency and other viewing characteristics, such as color and viewing‐angle characteristics. In this paper, using the rigorous classical electromagnetic model based on oscillating electric dipoles embedded in layered structures, the emission characteristics of top‐emitting OLEDs as a function of device structures will be analyzed. From comprehensive analysis, trends in the dependence of ewmission characteristics on device structures were extracted, and, accordingly, a general methodology for optimizing viewing characteristics of top‐emitting OLEDs for display applications will be suggested. The effectiveness of the analysis and the methodology was confirmed by experimental results.     

High‐performance white OLEDs with high color‐rendering index for next‐generation solid‐state lighting

Abstract— Several white‐OLED structures with a high color‐rendering index (CRI) were investigated for lighting applications. A two‐unit fluorescent/phosphorescent hybrid white OLED achieved an excellent CRI of 95, high luminous efficacy of 37 lm/W, and long lifetime of over 40,000 hours at 1000 cd/m². White‐OLED lighting panels of 8 × 8 cm for high‐luminance operation were fabricated, and a stable emission at 3000 cd/m² was confirmed. Quite a small variation in chromaticity in a different directions was achieved by using an optimized optical device structure. With a light‐outcoupling substrate, a higher efficacy of 56 lm/W, high CRI of 91, and longer half‐decay lifetime of over 150,000 hours at 1000 cd/m² was achieved. All‐phosphorescent white OLEDs placed on the light‐outcoupling substrate show a high CRI of 85 and higher efficacy of 65 lm/W with a fairly good half‐decay lifetime of over 30,000 hours. With a further voltage reduction and a high‐index spherical extractor, 128 lm/W at 1000 cd/m² has been achieved.     

Active‐matrix organic light‐emitting displays employing two thin‐film‐transistor a‐Si:H pixels on flexible stainless‐steel foil

Abstract— An active‐matrix organic light‐emitting diode (AMOLED) display driven by hydrogenated amorphous‐silicon thin‐film transistors (a‐Si:H TFTs) on flexible, stainless‐steel foil was demonstrated. The 2‐TFT voltage‐programmed pixel circuits were fabricated using a standard a‐Si:H process at maximum temperature of 280°C in a bottom‐gate staggered source‐drain geometry. The 70‐ppi monochrome display consists of (48 × 4) × 48 subpixels of 92 ×369 μm each, with an aperture ratio of 48%. The a‐Si:H TFT pixel circuits drive top‐emitting green electrophosphorescent OLEDs to a peak luminance of 2000 cd/m².     

Mercury‐free 18‐in. flat fluorescent lamp with good uniformity

We have developed an 18‐in. 287 × 359‐mm flat fluorescent lamp (FFL) that uses a xenon dielectric barrier discharge and analyzed its electro‐optical characteristics. The surface luminance of the lamp having a diffuser sheet thickness of 3 mm was 5600 cd/m² and the luminance uniformity was 92% at an applied voltage of 950 Vrms. The luminous efficacy of the FFL was 24.5 lm/W for a luminance of 4200 cd/m² when driven by a sine‐wave voltage.     

Eu2+‐doped barium thioaluminate EL devices prepared by two‐target pulsed‐electron‐beam evaporation

Abstract— New blue‐emitting thin‐film‐electroluminescent (TFEL) devices that satisfy the requirements for full‐color TFEL displays were developed. Eu²⁺‐doped BaAl²S⁴ thin films were used for the emission layer. BaAl²S⁴:Eu thin films were prepared by two‐target pulsed‐electron‐beam evaporation suitable for the deposition of multinary compounds that have difficulty in obtaining stoichiometoric thin films. The EL spectrum only had a peak at around 470 nm. The Commission Interantionale de l'Eclairge (CIE) color coordinates were x = 0.12 and y = 0.10. The luminance level from a 50‐Hz pulses voltage was 65 cd/m².     

Highly efficient blue organic light‐emitting diode with high color purity using 4,4′‐N,N′‐dicarbazole‐biphyenyl (CBP) doped with 1,4‐bis[2‐(3‐N‐ethylcarbazoryl) vinyl]benzene (BCzVB)

Abstract— An efficient pure blue multilayer organic light‐emitting diode employing 1,4‐bis[2‐(3‐N‐ethylcarbazoryl)vinyl]benzene (BCzVB) doped into 4,4′‐N,N′‐dicarbazole‐biphyenyl (CBP) is reported. The device structure is ITO (indium tin oxide)/TPD (N,N′‐diphenyl‐N,N′‐bis (3‐methylphenyl)‐1,1′biphenyl‐4,4′diamine)/CBP:BCzVB/Alq₃ (tris‐(8‐hydroxy‐quinolinato) aluminum)/Liq (8‐hydroxy‐quinolinato lithium)/Al; here TPD was used as the hole‐transporting layer, CBP as the blue‐emitting host, BCzVB as the blue dopant, Alq₃ as the electron‐transporting layer, Liq as the electron‐injection layer, and Al as the cathode, respectively. A maximum luminance of 8500 cd/m² and a device efficiency of 3.5 cd/A were achieved. The CIE co‐ordinates were x = 0.15, y = 0.16. The electroluminescent spectra reveal a dominant peak at 448 nm and additional peaks at 476 nm with a full width at half maximum of 60 nm. The Föster energy transfer and, especially, carrier trapping models were considered to be the main mechanism for exciton formation on BCzVB molecules under electrical excitation.     

A photographic technique for assessing the viewing‐angle performance of liquid‐crystal displays

Abstract— Liquid‐crystal displays (LCDs) have notable variation in luminance and perceived contrast as a function of the angle from which they are viewed. Though this is an important performance issue for LCDs, most evaluation techniques for assessing this variation have been limited to laboratory settings. This study demonstrates the use of a photographic technique for such an evaluation. The technique is based on an actively cooled charge‐coupled‐device (CCD) detector in combination with a macro lens covering a circular angular range (θ) of ±42.5°. The camera was used to evaluate the luminance and perceived contrast properties of an LCD. Uniform field images corresponding to 17 equally spaced gray‐scale values in the digital driving level (DDL) range of the display system were acquired. The 12‐bit gray‐scale digital images produced by the camera were converted to luminance units (cd/m²) via the measured luminance vs. DDL response function of the camera. The changes in perceived contrast as a function of viewing angle were derived from the Barten model of the gray‐scale response of the human‐visual system using the methods proposed by the AAPM TG18 Report. The results of this photographic technique were compared to measurements acquired from a similar display using a Fourier‐optics‐based luminance meter. The results of the two methods generally agreed to within 5%. The photographic methods used were found to be accurate and robust for in‐field assessment of the angular response of LCDs over the FOV of the camera.     

High‐efficiency red‐phosphorescent organic light‐emitting diode with the organic structure of 2‐TNATA/Bebq2:SFC‐411/SFC‐137

Abstract— High‐efficiency and simple‐structured red‐emitting phosphorescent devices based on the hole‐injection layer of 4,4′,4″‐tris(2‐naphthylphenyl‐phenylamino)‐triphenylamine [2‐TNATA] and the emissive layer of bis(10‐hydroxybenzo[h] quinolinato)beryllium complex [Bebq²] doped with SFC‐411 (proprietary red phosphorescent dye) have been researched. The fabricated devices are divided into three types depending on whether or not the hole‐transport layer of N,N′‐bis(1 ‐naphthyl)‐N, N'‐diphenyl‐1,1′‐biphenyl‐4,4′‐diamine [NPB] or the electron‐transport layer of SFC‐137 (proprietary electron transporting material) is included. Among the experimental devices, the best electroluminescent characteristics were obtained for the device with an emission structure of 2‐TNATA/Bebq²:SFC‐411/SFC‐137. In this device, current density and luminance were found to be 200 mA/cm² and 15,000 cd/m² at an applied voltage of 7 V, respectively. Current efficiencies were 15 and 11.6 cd/A under a luminance of 500 and 5000 cd/m². The peak wavelength in the electroluminescent spectral distribution and color coordinates on the Commission Internationale de I'Eclairage (CIE) chart were 628 nm and (0.67, 0.33), respectively.     

Efficient white organic light‐emitting diodes based on a balanced split of the exciton‐recombination zone using a graded mixed layer as an electron‐blocking layer

Abstract— Efficient white organic light‐emitting diodes with both a graded mixed layer as the blue‐emitting layer and an electron‐blocking layer, and a DPVBi:Rubrene layer as a yellow‐emitting layer have been demonstrated. The mixing of the two colors occurs due to a balanced split of the exciton‐recombination zone by the graded mixed layer serving as the electron‐blocking layer. The white organic light‐emitting diode with an ITO/2‐TNATA 30 nm/NPB 30 nm/DPVBi:Rubrene (1.0 wt.%) 5 nm/NPB:DPVBi (9:1) 150 nm/NPB:DPVBi (5:5) 75 nm/NPB:DPVBi (3:7) 75 nm/NPB:DPVBi (2:8) 75 nm/NPB:DPVBi (0.5:9.5) 75 nm/BCP 5 nm/Alq³ 30 nm/LiF 0.5 nm/Al 100 nm structure is chosen as a device with an optimal configuration among devices investigated in this study. The employment of the graded mixed layer in the device is effective in suppressing the color shift at different voltages. The white light, with a Commission Internationale d'Eclairage chromaticity coordinates of (0.33, 0.34), is obtained with an applied voltage of 10.5 V for the device. At the applied voltage, the luminance is 4882 cd/m² and the current efficiency is 5.03 cd/A.     

Active‐matrix organic light‐emitting diode displays with indium gallium zinc oxide thin‐film transistors and normal,inverted, and transparent organic light‐emitting diodes

Abstract— Active‐matrix organic light‐emitting diode (AMOLED) displays have gained wide attention and are expected to dominate the flat‐panel‐display industry in the near future. However, organic light‐emitting devices have stringent demands on the driving transistors due to their current‐driving characteristics. In recent years, the oxide‐semiconductor‐based thin‐film transistors (oxide TFTs) have also been widely investigated due to their various benefits. In this paper, the development and performance of oxide TFTs will be discussed. Specifically, effects of back‐channel interface conditions on these devices will be investigated. The performance and bias stress stability of the oxide TFTs were improved by inserting a SiO^x protection layer and an N²O plasma treatment on the back‐channel interface. On the other hand, considering the n‐type nature of oxide TFTs, 2.4‐in. AMOLED displays with oxide TFTs and both normal and inverted OLEDs were developed and their reliability was studied. Results of the checkerboard stimuli tests show that the inverted OLEDs indeed have some advantages due to their suitable driving schemes. In addition, a novel 2.4‐in. transparent AMOLED display with a high transparency of 45% and high resolution of 166 ppi was also demonstrated using all the transparent or semi‐transparent materials, based on oxide‐TFT technologies.     

Electrical characterization and modelling of top‐emitting PIN‐OLEDs

Abstract— Positively doped, intrinsic, negatively doped organic light‐emitting diodes (PIN‐OLEDs) have been shown to exhibit high efficiency and a long lifetime compared to conventional small‐molecule OLEDs (SM‐OLEDs). The improved performance of PIN‐OLEDs makes them attractive for use in display applications. Knowledge of the electrical load exhibited by these devices is used to develop an equivalent electrical‐circuit model. Such models are used by circuit designers to assist with the precise design of active‐matrix‐display driver circuits used in such applications. In this paper, the development of a SPICE model for a top‐emitting PIN‐OLED stack is reported.