A viewing‐angle‐controllable blue‐phase liquid‐crystal display

Abstract— A viewing‐angle‐controllable liquid‐crystal display (LCD) is proposed. When the device is only driven by an in‐plane electric field, it exhibits a wide‐viewing‐angle (WVA) mode. And it exhibits narrow‐viewing‐angle (NVA) mode when it is driven by a vertical electric field as well as an in‐plane electric field. In this manner, the viewing angle of the device can be controlled from 100° to 30°. The device exhibits a good viewing‐angle‐controlling characteristic and high transmittance.     

A photographic technique for assessing the viewing‐angle performance of liquid‐crystal displays

Abstract— Liquid‐crystal displays (LCDs) have notable variation in luminance and perceived contrast as a function of the angle from which they are viewed. Though this is an important performance issue for LCDs, most evaluation techniques for assessing this variation have been limited to laboratory settings. This study demonstrates the use of a photographic technique for such an evaluation. The technique is based on an actively cooled charge‐coupled‐device (CCD) detector in combination with a macro lens covering a circular angular range (θ) of ±42.5°. The camera was used to evaluate the luminance and perceived contrast properties of an LCD. Uniform field images corresponding to 17 equally spaced gray‐scale values in the digital driving level (DDL) range of the display system were acquired. The 12‐bit gray‐scale digital images produced by the camera were converted to luminance units (cd/m²) via the measured luminance vs. DDL response function of the camera. The changes in perceived contrast as a function of viewing angle were derived from the Barten model of the gray‐scale response of the human‐visual system using the methods proposed by the AAPM TG18 Report. The results of this photographic technique were compared to measurements acquired from a similar display using a Fourier‐optics‐based luminance meter. The results of the two methods generally agreed to within 5%. The photographic methods used were found to be accurate and robust for in‐field assessment of the angular response of LCDs over the FOV of the camera.     

Transflective blue‐phase liquid‐crystal display with corrugated electrode structure

Abstract— A transflective polymer‐stabilized blue‐phase liquid‐crystal display (BP‐LCD) with a corrugated electrode structure is proposed. To balance the optical phase retardation between the transmissive (T) and reflective (R) regions, two device structures are proposed. The first device structure has the same inclination angles but different cell gaps in the T and R regions. And the second device structure has the same cell gap but different inclination angles in the T and R regions. Both of the device structures can obtain well‐matched VT and VR curves. This display exhibits low operating voltage, high optical efficiency, and a wide viewing angle.     

Viewing angle switchable blue‐phase liquid crystal display with low voltage and high transmittance

We propose a viewing angle switchable blue‐phase liquid crystal display with low voltage and high transmittance. In this device, in‐plane protrusions are used to lower operating voltage and improve the transmittance. Besides, the top electrode can control viewing angle of the proposed display. When no voltage is applied to the top electrode, the display shows wide viewing angle mode. On the contrary, this display shows narrow viewing angle mode. So, this device exhibits low operating voltage, high transmittance, and good viewing angle controllable characteristics.     

A single‐cell‐gap transflective blue‐phase liquid crystal display based on fringe in‐plane switching electrodes

A transflective blue‐phase liquid crystal display (TRBP‐LCD) based on fringe in‐plane switching (FIS) electrodes is proposed. The proposed structure generates combined fringe and in‐plane electric fields that cause more liquid crystal (LC) molecules to reorient almost in plane above and between the pixel electrodes. The fringe field is mainly generated in the transmissive (T) region, and the horizontal electric field is mainly generated in the reflective (R) region. By optimizing the width of the pixel electrodes and the gap between two adjacent pixel electrodes, the different electric field intensity in the T and R regions contribute to balance the optical phase retardation between the T and R regions. As a result, the proposed TRBP‐LCD exhibits a low operating voltage and high optical efficiency, while it preserves a relatively simple fabrication process.     

Progress in viewing‐angle properties of liquid‐crystal displays

Abstract— Viewing‐angle dependences of the contrast ratio and color shift of LCDs have been radically improved as evidenced by the increasing application of LCDs in high‐quality television. This paper describes the concept of optical compensation and the fundamental characteristics of the viewing‐angle property for various LC modes.     

A reflective polarizer‐free display using dye‐doped polymer‐stabilized blue‐phase liquid crystals

Abstract— A reflective polarizer‐free display using dye‐doped polymer‐stabilized blue‐phase liquid crystal (DDPSBP‐LC) has been demonstrated. The mechanism is a combination of electrically tunable light absorption and Bragg reflection. In this paper, the influence of light absorption in DDPSBP‐LC by changing the dye concentration and absorption paths has been studied. Increased dye concentration can improve the contrast ratio of DDPSBP‐LC; however, the response time is the tradeoff. Increasing the cell gap can improve the contrast ratio of DDPSBP‐LC; however, the response time remains the same. The study of DDPSBP‐LC can help in shutter‐glass applications of 3‐D displays and electronic paper.     

Polarization‐independent blue‐phase liquid‐crystal gratings driven by vertical electric field

Abstract— A blue‐phase liquid‐crystal grating is proposed by applying a vertical electric field with lateral periodic distribution. Simulation on electric‐field distribution was also carried out, the results of which suggest the alternation of isotropic and ordinary refractive indices in the lateral direction. Through the electrode configuration design, both 1 D and 2D gratings were demonstrated with high transmittance of ca. 85%. The diffraction efficiency of the first order reached up to 38.7% and 1 7.8% for the 1D and 2D cases, respectively. The field‐induced fast phase modulation permits a rapid switching of diffraction orders down to the submillisecond scale.     

Blue phase dual‐view liquid crystal display based on directional backlight system

We design a blue phase dual‐view liquid crystal display (BP DVLCD) based on a directional backlight system. Combining the patterned electrodes with the directional backlight system, the cross‐talk ratio is reduced to only 1.17%. Moreover, the resolution and brightness will be tripled by using field‐sequential color display. In the preferred viewing area, the BP DVLCD has a high contrast ratio of ~1700:1.     

Pixel‐isolated liquid‐crystal mode by using a patterned anisotropic phase separation for flexible LCDs

Abstract— A pixel‐isolated liquid‐crystal (PILC) mode for enhancing the mechanical stability of flexible‐display applications is proposed. Because liquid‐crystal (LC) molecules in this mode are isolated in each pixel by patterned or phase‐separated microstructures, and the two substrates are tightly attached to each other by a solidified polymer layer, the LC alignment is stable against external pressure, and the cell gap of our structure is uniformly preserved against bending deformation of the plastic substrates. The mechanical stability of the PILC structure having plastic substrates was tested for its electro‐optic properties.     

Low‐temperature‐applicable polymer‐stabilized blue‐phase liquid crystal and its Kerr effect

Abstract— A type of polymer‐stabilized blue‐phase liquid crystal, which can be used in a low‐temperature environment, is proposed. The blue‐phase range after polymerization was widened to more than 73°C, and the blue‐phase texture is very stable even at a temperature as low as ?35°C. The electro‐optical performances dependence on polymer concentration was investigated. The results indicate that the saturation voltage increases and the hysteresis enhances as the polymer concentration increases. The rise and decay times could reach as low as 391 and 789 μsec, respectively. Such material also shows good electro‐optical behavior at a temperature of ?35°C. In addition, the Kerr constant was tested under a uniformly distributed electric field to be 2.195 nm/V² at room temperature and 2.077 nm/V² at ?35°C. The Kerr constant tested under white‐light illumination was 1.975 nm/V², which shows a small dispersion.     

Prospects of emerging polymer‐stabilized blue‐phase liquid‐crystal displays

Abstract— The prospects of emerging polymer‐stabilized blue‐phase liquid‐crystal displays, or more generally, Kerr‐effect‐induced isotropic‐to‐anisotropic transition, are analyzed with special emphases on the temperature effects. As the temperature increases, both the Kerr constant, induced birefringence, and response time decrease but at different rates. The proposed physical models fit well with experimental results. Some remaining technical challenges associated with this promising display technology are discussed.     

A single‐cell‐gap transflective liquid‐crystal display using different pretilt angles in transmissive and reflective regions

Abstract— A single‐cel l‐gap transflective liquid‐crystal display with two types of liquid‐crystal alignment based on an in‐plane‐switching structure is proposed. The transmissive region is almost homeotropically aligned with the rubbed surfaces at parallel directions while the reflective region has a homeotropic liquid‐crystal alignment. For every driving voltage for a positive‐dielectric‐anisotropy nematic liquid crystal, the effective cell‐retardation value in the transmissive region becomes larger than that in the reflective region because of optical compensation film which is generated by low‐pretilt‐angle liquid crystal in the transmissive region. Under the optimization of the liquid‐crystal cell and alignment used in the transmissive and reflective areas, the transmissive and reflective parts have similar gamma curves. An identical response time in both the transmissive and reflective regions and a desirable viewing angle for personal portable displays can also be obtained.     

Switchable transmissive and reflective liquid‐crystal display using a multi‐domain vertical alignment

Abstract— A wide‐view transflective liquid‐crystal display (LCD) capable of switching between transmissive and reflective modes in response to different ambient‐light conditions is proposed. This transflective LCD adopts a single‐cell‐gap multi‐domain vertical‐alignment (MVA) cell that exhibits high contrast ratio, wide‐viewing angle, and good light transmittance (T) and reflectance (R). Under proper cell optimization, a good match between the VT and VR curves can also be obtained for single‐gamma‐curve driving.     

Photostable liquid‐crystal guest‐host nano‐materials for display applications

Abstract— We theoretically modeled the optical plasmon absorption of anisotropic metallic nanoparticles in a liquid‐crystal host medium. Metallic nanorods and spheroids act as pleochroic dopants with virtually unlimited photostability. Calculations predict that full‐color displays based on nanorod orientation driven by the transition from homogeneous to homeotropic LC alignment are feasible. These displays are expected to have large viewing angles without the need for polarizers or LC anchoring surfaces.     

Low‐voltage and high‐transmittance blue‐phase liquid‐crystal device with slanted electrodes

Abstract— A low‐voltage (～10 V_rms) and high‐transmittance (～90%) polymer‐stabilized blue‐phase liquid‐crystal (BPLC) device with a slanted‐electrodes structure is proposed. Unlike the vertical‐field‐switching (VFS) mode in which oblique incident light and a vertical field are employed, the proposed device utilizes normal incident light and an oblique field. The slanted electrodes generate a strong and uniform oblique electric field, which contributes in obtaining low voltage and high transmittance. Moreover, no couple films or prism sheets are needed, which helps to enhance the optical efficiency and simplify of the device structure. This device has great potential application for emerging BPLC displays and photonic devices.     

Comb‐on‐plane switching electrodes for liquid‐crystal displays

Abstract— Although the common twisted‐nematic liquid‐crystal displays (TN‐LCD) has excellent contrast and low color dispersion, it suffers from small viewing angle when driven into the homeotropic state. Among the many techniques proposed, in‐plane switching (IPS) has been quite effective in improving viewing angle. However, there may be difficulty in adopting conventional IPS to higher‐definition displays because it suffers from limited storage capacitance and reduced transmittance. A new comb‐on‐plane switching (COPS) electrode design is proposed. Compared to conventional IPS, COPS allows for lower switching voltage and offers advantages including naturally scalable storage capacitance, wide viewing angle with TN‐like high transmittance, and low color dispersion.     

Ultra‐fast‐switching flexoelectric liquid‐crystal display with high contrast

Abstract— The flexoelectro‐optic effect provides a fast‐switching mechanism (0.01–0.1 msec), suitable for use in field‐sequential‐color full‐motion‐video displays. An in‐plane electric field is applied to a short‐pitch chiral nematic liquid crystal aligned in the uniform standing helix (or Grandjean) texture. The switching mechanism is experimentally demonstrated in a single‐pixel test cell, and the display performance is investigated as a function of device parameters. A contrast ratio of 2000:1 is predicted.     

Fast‐response liquid‐crystal displays using crossed fringe fields

Abstract— A fast‐response and wide‐view liquid‐crystal display (LCD) using the crossed fringe‐field‐switching (CFFS) mode is proposed, where the fringe‐field electrodes exist on both the top and bottom substrates. The bottom fringe field is used to turn on the LC directors and the top fringe field is used to assist in the LC decay process. The decay time is reduced by ～2× compared to that of the conventional FFS mode between the full bright and dark states, and more than a 2× improvement is obtained for other gray‐scale transitions. This CFFS mode also preserves the wide‐view characteristics as the conventional FFS mode. Its applications to LCD TVs and monitors for reducing image blur are addressed.     

A single‐cell‐gap transflective liquid‐crystal display with special electrodes

Abstract— A single‐cell‐gap transflective liquid‐crystal display with special electrodes was demonstrated. In the transmissive region, a strong longitudinal electric field was generated by decreasing the distance between the top and bottom transparent indium‐tin‐oxide electrodes; while in the reflective region, a weak longitudinal electric field is generated by increasing the distance between the top and bottom transparent indium‐tin‐oxide electrodes. And slit‐patterned electrodes were used to optimize the fringe field at the junction of the transmissive and reflective regions. As a result, both the transmissive and reflective display modes show well‐matched gray scales. The simulated single‐cell‐gap TR‐LCD has good performances.