Structural,magnetic, and antimicrobial properties of zinc doped magnesium ferrite for drug delivery applications

In this study, drug loading and release ability of the ferrite nanoparticle coated with PEG (polyethylene glycol) have been investigated for biomedical applications. The zinc-magnesium ferrite (Zn_xMg_(1-x)Fe₂O₄) was synthesized using sol-gel route. The doping concentration of Zn was gradually increased from zero to maximum (x = 1). XRD (X-ray diffraction) analysis of the samples shows the single phase with a cubic spinel structure. The Debye-Scherer formula has been used to calculate the average crystallite size (30.51 nm). The dumbbell and spherical shaped morphology (40–50 nm average particle size) have been investigated from the secondary electron images of FESEM (Field Emission Scanning Electron Microscopy). The antimicrobial assay has been carried out against E. coli bacteria by gentamicin (drug) loaded ferrite nanoparticles. The significant zone of inhibition might suggest that the drug-loaded ferrite nanoparticles can be used in drug delivery applications. PL (Photoluminescence) of the spinel ferrite shows that all the samples are in the visible range, and peaks at around 430 nm. The result reveals the synthesis of high purity ferrite nanoparticles with significant potential for drug delivery applications.     

Photo‐cross‐linked biodegradable thermo‐ and pH‐responsive hydrogels for controlled drug release

A new strategy was developed to prepare thermo‐ and pH‐sensitive hydrogels by the crosslinking of poly(N‐isopropylacrylamide) with a biodegradable crosslinker derived from poly(L ‐glutamic acid). Hydrogels were fabricated by exposing aqueous solutions of precursor containing photoinitiator to UV light irradiation. The swelling behaviors of hydrogels at different temperatures, pHs, and ionic strengths were examined. The hydrogels shrank under acidic condition or at temperature above their collapse temperature and would swell in neutral or basic media or at lower temperature. These processes were reversible as the pH or temperature changed. All hydrogels exhibited no weight loss in the simulated gastric fluid but degraded rapidly in the simulated intestinal condition. Bovine serum albumin were used as a model protein drug and loaded into the hydrogels. The in vitro drug release experiment was carried out at different pH values and temperatures. The pH and temperature dependent release behaviors indicated the promising application of these materials as stimuli‐responsive drug delivery vehicles. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Viscoelastic and swelling properties of glucose oxidase loaded polyacrylamide hydrogels and the evaluation of their properties as glucose sensors

Here we report the immobilization of glucose oxidase in polyacrylamide hydrogels carried out by aqueous crosslinking copolymerization of acrylamide and N,N′ methylene bisacrylamide in the presence of the enzyme. The swelling and viscoelastic properties of the hydrogels were evaluated as a function of the content of crosslinker of the polymer chains and enzyme concentration. Amperometric measurements were also carried out to evaluate the system as a glucose biosensor.     

On physical and antibacterial properties and drug release behavior of poly(vinyl alcohol) hydrogels: effect of drug loaded chitosan nanoparticles

This paper deals with influence of chitosan nanoparticles (CNPs) loaded by tetracycline, as a drug, on the physico-mechanical and antibacterial properties as well as drug release behavior of poly(vinyl alcohol), PVA, hydrogels prepared by electron beam irradiation. The formation of spherical chitosan particles in nanoscale size prepared by an ionic gelation method was confirmed by FTIR and UV spectroscopy, and scanning electron microscopy analyses. The drug release kinetic studies from drug loaded chitosan nanoparticles (DLCNPs) at pH = 7.4 revealed a linear and steady release behavior over long period of time. The theoretical analysis of the swelling kinetic data, using Peppas’s model showed that the swelling kinetic is governed by Fickian diffusion for all the prepared hydrogels, however, the water diffusion coefficient, and therefore, the swelling content were lower for the hydrogels loaded with DLCNPs as compared to the ones with the neat drug. In agreement with these results, the hydrogels containing DLCNPs exhibited a more controlled drug release behavior with significantly stronger antibacterial activity. The tensile mechanical properties of the hydrogels not affected by the DLCNPs were found to be suitable for wound dressing applications.     

Gelatin and amylopectin-based phase-separated hydrogels: An in-depth analysis of the swelling,mechanical, electrical and drug release properties

The current study delineates the development of gelatin–amylopectin-based phase-separated hydrogels for drug delivery applications. Gelatin and amylopectin were used as the representative protein and polysaccharide phases, respectively. The hydrogels were prepared by adding different proportions of amylopectin to gelatin solutions and subsequently cross-linking the mixture using glutaraldehyde. Microscopic analysis showed formation of phase-separated hydrogels. Secondary structure of gelatin was conserved within the hydrogels. The presence of amylopectin drastically reduced the rate of water absorption by the hydrogels. Viscoelastic analysis using stress relaxation study suggested an increase in the viscous component of the hydrogels with the increase in the amylopectin content. After incorporating amylopectin within the gelatin hydrogel, even though the bulk resistance remained unaltered, there was a corresponding variation in the capacitive elements of the equivalent electrical models. The release of the drug from the hydrogels was diffusion mediated. Suitable mathematical models were used for the analysis of the swelling (Peleg’s model), viscoelastic (Weichert model), electrical (RQQ model) and drug release (Korsmeyer–Peppas and Peppas–Sahlin models) properties. The drug retained its antimicrobial activity within the hydrogels. An analysis of the results suggested that the developed hydrogels may be explored as matrices for controlled drug delivery applications.     

介孔羟基磷灰石的合成及药物释放性能研究

本文采用水热合成法,制备出介孔羟基磷灰石,该材料具有较高比表面积和较大的孔容,药物缓释性能测试表明,材料具有较高的药物组装率和较好药物缓释性能,因此,可以作为药物缓释载体,从而更好地实现对骨组织的修复。     

聚天冬氨酸水凝胶合成及其应用于药物控释的研究进展

聚天冬氨酸是一种新型的聚合氨基酸材料,具有很好的生物相容性、生物降解性。本文综述了聚天冬氨酸及其衍生物水凝胶的研究现状,介绍了化学交联、光交联、γ射线交联3种交联方法合成的聚天冬氨酸及其衍生物水凝胶,以及近年来聚天冬氨酸基凝胶对大分子蛋白药物、小分子抗炎性药物、抗癌和基因药物控释的研究进展,并对该凝胶在药物控释领域的发展方向进行了预测。     

Swelling kinetics,mechanical properties,and release characteristics of chitosan‐based semi‐IPN hydrogels

Two series of pH‐sensitive semi‐interpenetrating network hydrogels (semi‐IPN) based on chitosan (CS) natural polymer and acrylamide (AAm) and/or N‐hydroxymethyl acrylamide (HMA) monomers by varying the monomer and CS ratios were synthesized by free radical chain polymerization. 5‐Fluorouracil (5‐FU), a model anticancer drug, has been added to the feed composition before the polymerization. The characterization of gels indicated that the drug is molecularly dispersed in the polymer matrix. The swelling kinetics of drug‐loaded gels have decreased with increased HMA content at 37°C in both distilled water and buffer solutions with a pH of 2.1 or 7.4. Elastic modulus of the gels increased with the increase in HMA content and higher CS concentration enhanced the elastic modulus positively. Moreover, cumulative release percentages of the gels for 5‐FU were ca. 10% higher in pH 2.1 than those in pH 7.4 media. It was determined that they can be suitable for the use in both gastric and colon environments. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41886.     

Effect of the intercalation agent content of montmorillonite on the swelling behavior and drug release behavior of nanocomposite hydrogels

A series of novel dual functional nanocomposite hydrogels were prepared from N‐isopropylacrylamide (NIPAAm), acrylic acid (AA) that is neutralized 50 mol % by sodium hydroxide (SA50), and montmorillonite (MMT). MMT was intercalated with three different contents of intercalation agent of (3‐acrylamidopropyl) trimethyl ammonium chloride (TMAACl). Investigation of the effect of intercalated MMT with three contents of intercalation agent (TMAACl) in the present nanocomposite hydrogels on the swelling and drug release behaviors is the main purpose in this study. The microstructure was identified by X‐ray diffraction (XRD). Results showed that the swelling ratio for the present nanocomposite hydrogels decreased with an increase in the content of the intercalation agent. The gel strength of the present gels did not change obviously with an increase in the content of intercalation agent. XRD results indicated that exfoliation of MMT was achieved in the dry and swollen gel state. Finally, the drug release behaviors for these gels were accessed also. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 74–82, 2004     

Mechanical properties and drug release rate of poly(vinyl alcohol)/poly(ethylene glycol)/clay nanocomposite hydrogels: Correlation with structure and physical properties

Poly(vinyl alcohol)/poly(ethylene glycol) hydrogels containing curcumin as a drug and the various amounts of a montmorillonite nanoclay are prepared using the freezing–thawing method. Nanoclay quantity influence on the physicomechanical properties and the drug release rate of the hydrogel as well as relationship between them is investigated. X-Ray diffraction and Atomic force microscopy analysis reveal the nanoclays have an intercalation structure in the hydrogel, and the hydrogel crystallization decreases with increasing the nanoclay inclusion. From the SEM micrographs observation, it was revealed that due to the presence of the nanoclay in the hydrogel, its porosity decreased. The naonoclay has an amount-depended dual effect on the hydrogel swelling. The swelling mechanism is a normal Fickian diffusion for all the hydrogel samples. Strong physical interactions between the nanoclays and the polymer chains in the nanocomposite hydrogels are evidenced by the rheological studies. These interactions lead to significant reinforcement of the hydrogel tensile strength, intensified by the nanoclay amount. Interestingly, the nanoclays show the capability of accelerating and, also, decelerating the drug release of the hydrogel. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47843.     

Synthesis of thermoresponsive polymeric micelles of PNIPAAm‐b‐OMMA as a drug carrier for loading and controlled release of prednisolone

We synthesized a drug delivery system of poly(N‐isopropylacrylamide)‐b‐oligo(methyl methacrylate) (PNIPAAm‐b‐OMMA) via polycondensation of two homopolymers in 1,4‐dioxane. The products are characterized by FT‐IR and ¹H‐NMR spectra and TEM. The PNIPAAm‐b‐OMMA copolymer micelles in aqueous solution present the same lower critical solution temperature (LCST) as the unmodified PNIPAAm, owing to the formation of a core–shell micellar structure that the hydrophilic shell shields the hydrophobic inner OMMA core from interacting with water. The micelle carriers exhibit two heterogeneous microdomains: a hydrophobic inner core capable of highly solubilizing hydrophobic prednisolone molecules, plus a hydrated outer shell that stabilizes this micellar structure below its LCST. Moreover, the micelle carriers show reversible thermoresponsive aggregation/dispersion in response to temperature cycles through the LCST. By using the antiinflammation drug prednisolone as model drug, it is found that the PNIPAAm‐b‐OMMA drug carrier could prolong the release time and control the release amount by changing the temperature. Accordingly, this copolymer micelle may provide as an effective drug carrier for drug control and release. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

The effect of chemical composition and morphology on the drug delivery properties of hydroxyapatite-based biomaterials

In the case of orthopedic and dental interventions, local antibiotic therapy reduces significantly the risk associated with the intervention. The aim of this study was the preparation and characterization of pure hydroxyapatite (HA), Si- and Mg-doped HA, which ensures the sustained release of doxycycline, and the investigation of the parameters, which were crucial for the drug release. The carriers were synthesized using the precipitation method. In order to achieve different morphologies, traditional drying and spray drying methods were used: Si-doped HA was prepared using two different sources of Si, Na₂SiO₃ and Ludox AS-40, while (Mg(NO₃)₂)*6H₂O was used for substitution with Mg. The carriers were characterized by XRD, SEM, EDX and TG/DTA methods, and the ion incorporation was also confirmed by lattice parameters calculations. Doxy was bound on the carriers by physical adsorption, the adsorption capacity increased proportionally by increasing the concentration of the initial Doxy solutions (10, 15, 20, 25 g/L). The investigated systems showed different releases with the change of the dissolution medium (in the case of HA microspheres, the release in PBS was twice as high as in SBF), chemical composition and morphology of the carriers. The retard effect of the carriers was improved by the spherical morphology, and the reduced release by ion substitution in both SBF and PBS increased as follows: HA < HASi1<HAMg < HASi2. The release mechanism of Doxy was discussed through five different release kinetics models.     

Preparation,characterization, and swelling and drug release properties of a crosslinked chitosan‐polycaprolactone gel

For applications in biotechnology to prepare biopolymers containing functional groups is essential. In addition, these materials have to be strong to provide physical support for practical applications. Recently, chitosan, polycaprolactone (PCL), and their various combinations were used for this purpose. In this work, we described the preparation and characterization of a new biodegradable polymeric gel containing chitosan and PCL. The gel preparation reactions were performed in suitable acetic acid solutions to obtain the products in high yields. A crosslinking agent was added to produce crosslinked gels. Swelling behavior of chitosan/PCL gels in different compositions was studied, and the results were compared. The chitosan/PCL gels show a rather large equilibrium swelling in water and in the phosphate buffered saline solution. Acrylic acid (AA) was added to these gels during preparation process to obtain a stable material for various applications. These polymeric gels were characterized by Fourier transform infrared. Their physical and morphological properties were investigated by using differential scanning calorimeter and scanning electron microscope techniques, respectively. Cell growth experiments indicate that chitosan, a positively charged polysaccharide, is not suitable for cell proliferation studies. On the other hand, the drug release studies were successful and, 59% of lidocaine, was released from a chitosan/PCL/AA hydrogel in buffer solution at pH = 7.4 at 37°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of sodium hexametaphosphate concentration on the swelling and controlled drug release properties of chitosan hydrogels

An ionically crosslinked polymer network composed of chitosan and sodium hexametaphosphate (SHMP) was synthesized to determine their swelling and ascorbic acid release kinetics at various SHMP concentrations. The chitosan/SHMP hydrogels were synthesized using an acetic acid aqueous solution (1% v/v). Ionization constants (pK_b) of the SHMP were obtained by potentiometric titration. The results show that the SHMP was hydrolyzed in acidic medium forming orthophosphate and trimetaphosphate. The swelling percentages were measured at different swelling media pH's; the higher swelling capacities were for the systems that were swollen in neutral solution. Also, it was studied the ionic crosslinking degree by turbidimetric titration, comparing the electrostatic interactions between the chitosan and the SHMP; the results shows that electrostatic interactions between the amine groups of the chitosan and the anionic groups of the SHMP are dependent of the swelling medium pH. The ascorbic acid diffusion inside the hydrogel follows the second law of Fick, and the diffusion coefficients were obtained for different SHMP concentrations. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of porosigen on the swelling behavior and drug release of porous N‐isopropylacrylamide/poly(ethylene glycol) monomethylether acrylate copolymeric hydrogels

A series of porous thermoreversible hydrogels were prepared from N‐isopropylacrylamide (90 mol %) and poly(ethylene glycol) methylether acrylate (10 mol %), which was derived from poly(ethylene glycol) monomethylether, N,N′‐methylenebisacrylamide, and porosigen, or poly (ethylene glycol) (PEG) with different molecular weights (MWs). The influence of pore volume in the gel on the physical properties, swelling kinetics, and solute permeation from these porous gels was investigated. The results show that the surface areas, pore volumes, and equilibrium swelling ratios for the porous gels increased with increasing MW of PEG, but the shear moduli and effective crosslinking densities decreased with increasing MW of PEG. The results from the dynamic swelling kinetics show that the transport mechanism was non‐Fickian. The diffusion coefficients of water penetrating into the gels increased with increasing pore volume of the gels. In addition, we also studied solute permeation through the porous gel controlled by temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5490–5499, 2006     

pH‐sensitive acrylic‐based copolymeric hydrogels for the controlled release of a pesticide and a micronutrient

Acrylic‐based copolymers of methyl methacrylate (MMA) and methacrylic acid (MAA) have been prepared by solution and bulk polymerization techniques using benzoyl peroxide (BPO) as an initiator. Three polymers were prepared with a varying ratio of MMA/MAA. In an effort to increase the hydrophilicity of the matrix, one MMA/MAA polymer was prepared by adding an additional amount of 2‐hydroxy ethyl methacrylate (HEMA). All the polymers were crosslinked in situ by ethylene glycol dimethacrylate (EGDMA). These polymers were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. Viscous flow characteristics were determined from solution viscosity and rheological measurements. Dynamic and equilibrium swelling experiments were carried out under varying pH conditions (i.e., 0.1N NaOH, 0.1N HCl, and double‐distilled water). Partially crosslinked hydrogels show varying hydrophilicity because of the presence of carboxylic acid groups making them pH‐responsive. Swelling increased with an increasing number of —COOH groups on the polymer backbone and the hydrophilicity varied with changing pH. Cypermethrin, a widely used pesticide, and cupric sulfate, a model micronutrient, were loaded into these pH‐sensitive hydrogels to investigate their controlled release characteristics. The in vitro release rates of both compounds have been carried out under static dissolution conditions at 30°C. Release data have been fitted to an empirical relation to estimate transport parameters. The release results have been discussed in terms of the varying hydrophilicity of the hydrogel network polymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 394–403, 2003     

Development of antimicrobial polypropylene sutures by graft copolymerization. II. Evaluation of physical properties,drug release,and antimicrobial activity

Polypropylene (PP) sutures are prepared by the simultaneous radiation grafting of 1‐vinylimidazole (VIm) onto PP monofilament sutures. The tenacity slightly decreases whereas the elongation increases with the increase in the degree of grafting. Thermogravimetric analysis shows that the stability of the sutures is enhanced by the grafting process. The grafted sutures have reasonably good water uptake. They are subsequently immobilized with an antimicrobial drug, ciprofloxacin. The modified suture releases the drug over a period of 4–5 days. The antimicrobial activity of the modified suture is determined against Esherichia coli by the zone of inhibition technique. A clear zone of inhibition is observed around the drug‐containing suture. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3534–3538, 2007     

Preparation,characterization and in vitro drug release properties of polytrimethylene carbonate/polyadipic anhydride blend microspheres

Polyadipic anhydride (PAA), an aliphatic polyanhydride, and polytrimethylene carbonate (PTMC), an aliphatic polycarbonate, were synthesized via ring opening polymerization of oxepan‐2,7‐dione and melt‐condensation of trimethylene carbonate (1,3 dioxan‐2‐one), respectively. PTMC–PAA blend microspheres containing different ratios of buprenorphine HCl (2, 5, and 10%) were prepared by an oil‐in‐oil emulsion solvent removal method. Microspheres with different ratios of PTMC–PAA (85/15, 70/30, and 55/45) containing 5% buprenorphine HCl were prepared. Microspheres were spherical with visible cracks and pores on the surface. The average particle size of microspheres was around 200 μm for all microspheres. Drug loading efficiency of PTMC–PAA microspheres (85/15, 70/30, and 55/45) was 97.2, 95.2, and 70.2%, respectively. With the increase in the PTMC ratio, the melting point and the enthalpy of melting were both decreased. The mechanism for drug release from PTMC–PAA blend microspheres were generally a combination of drug diffusion through polymers and biodegradation of the polymers. In first three days, the release from microspheres followed zero order kinetics and was dependent on the PAA content. After three days the drug release from microspheres followed first order kinetics. In conclusion it was demonstrated that buprenorphine HCl release from microspheres could be successfully controlled by using different ratios of PTMC–PAA blends. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2377–2383, 2006     

Dummy template molecularly imprinted polymer for omeprazole and the study of its drug binding and release properties

In this study, we tried to prepare an omeprazole (OMP)‐imprinted polymer and study its binding and release properties in an aqueous media. Because of the instability of OMP under polymerization conditions and the inability of the molecule to form effective interactions with monomers, pantoprazole (PANTO) was used as a dummy template for the imprinting process. Different monomers and solvents were evaluated in polymerization. The optimized imprinted polymer was prepared in chloroform as a porogen. Also, 4‐vinylpyridine and ethylene glycol dimethacrylate were selected as a functional monomer and a crosslinker, respectively. The optimized imprinted polymer was evaluated in a binding study. The binding and release properties of the polymer were then investigated at different pHs. Our data indicated a higher affinity of the imprinted polymer to PANTO and OMP than that of nonimprinted polymer (NIP). The maximum percentage of OMP released from the imprinted polymer was 36–41%, whereas that for the NIP was 74–85%. These data were related to the 38–43 and 29–34 μg of OMP released from the imprinted polymer and NIP, respectively. Also, the protective effect of the imprinted polymer for OMP at pH 2 was greater than that of the nonimprinted one. This study revealed that the dummy template molecular imprinting was an effective method for preparing selective imprinted cavities in a polymeric matrix, especially for the molecules that were unstable during polymerization or unable to establish effective bonds with the monomers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4165–4170, 2013     

Poly(dimethylsiloxane) coatings for controlled drug release. III. Drug release profiles and swelling properties of the free‐standing films

Previous reports in this series have described the preparation of stable poly(dimethylsiloxane) (PDMS) latices suitable for spray‐coating of drug tablets, as well as the mechanism of associated crosslinking reactions in PDMS emulsions. In the present investigation, in vitro evaluations were performed to study the effects of the amount of channeling agents, the addition of colloidal silica, and the pH of the dissolution media used. The study involved hydrochlorothiazide (as a marker drug) released from compressed tablets, which had been spray coated using PDMS latices with various polyethylene glycol (PEG) loadings as channeling agents. The dissolution results showed that coated tablets containing up to 25% (w/w dps) PEG could have constant release rates. Higher amounts of PEG resulted in nonlinear release patterns. The addition of colloidal silica decreased the rates of drug release. The pH of dissolution media affected the structures of the exposed PDMS films. Swelling tests were carried out to determine water uptake. Scanning electron microscopy and density measurements showed that the films obtained after soaking in higher‐pH media were more condensed, with corresponding changes in drug‐release rates. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 494–501, 2005