Synthesis and properties of N-(α-carboxyalkyl)acrylamide telomer-type surfactants having multihydrocarbon chains

N-(α-Carboxyalkyl)acrylamide telomer-type surfactants (xC _n−1 AmAc where n is alkyl chain length=6, 8, 10, 12; and x is degree of polymerization=3.3–13.1) were synthesized by the telomerization of monomer (C _n−1 AmAc) in the presence of the corresponding alkanethiol as a chain transfer agent and then investigated for their surface-active properties. xC _n−1 AmAc telomers lowered the surface tension of aqueous solutions that were at pH 9–10. The critical micelle concentrations (CMC) of the telomers were lower than those of the monomers with the same alkyl chain length, and the CMC values shifted to lower concentrations with both increasing alkyl chain length and polymerization degree. xC₉AmAc with x=3.3–6.3 gave the highest efficiencies in lowering the surface tension. The cross-sectional molecular areas per molecule of xC _n−1 AmAc telomers were smaller than the values estimated on the assumption that they are assemblies of C _n−1 AmAc monomer units. The foaming abilities and the foam stabilities were both in the orders of xC₇AmAc>xC₉AmAc>xC₅AmAc>xC₁₁AmAc. Mixtures of aqueous solutions of xC _n−1 AmAc telomers and toluene formed oil-in-water emulsions. The emulsion-stabilizing abilities were in the orders of xC₇AmAc>xC₅AmAc>xC₉AmAc=xC₁₁AmAc. The addition of Ca²⁺ to the mixed solutions of telomers and toluene resulted in formation of water-in-oil type emulsions. Thus, the surface-active properties of the telomers were influenced significantly by the alkyl chain length and the polymerization degree of the telomers. In addition, these properties could be correlated with the hydrophilic-lipophilic balance (HLB); the highest surface activities were observed by using xC _n−1 AmAc with HLB of 14–18.     

Solution Properties of Alkyl β-D-Maltosides

Alkyl β-D-maltosides are an important class of sugar-based nonionic surfactants and have been widely studied. Nevertheless, it is still necessary to investigate further their amphiphilic structure-surface property relationships. In this article, we reported a series of properties of synthetic alkyl β-D-maltosides ( 6a – 6i , n = 6–18) including their hydrophilic–lipophilic balance (HLB) number, water solubility, hygroscopicity, moisture-retention capacity, foaming ability, surface tension, thermotropic phase behavior, and skin irritation. Their HLB number and water solubility decreased with increasing alkyl chain length. Hexyl β-D-maltoside exhibited the strongest hygroscopicity and moisture-retention capacity. Decyl β-D-maltoside and dodecyl β-D-maltoside possessed excellent foaming power and foaming stability. Furthermore, the critical micelle concentration (CMC) of alkyl β-D-maltoside ( 6a – 6g , n = 6–14) and their surface tension at CMC decreased with increasing alkyl chain length. At last, alkyl β-D-maltosides ( 6a – 6g ) should be considered as safe surfactants by the skin irritation assessment.     

Synthesis and Properties of Alkoxyethyl β‐d‐Xylopyranoside

In order to improve the water solubility of sugar‐based surfactants, alkyl β‐d‐ xylopyranosides, novel sugar‐based surfactants, 1,2‐trans alkoxyethyl β‐d‐ xylopyranosides, with alkyl chain length n = 6–12 were stereoselectively prepared by the trichloroacetimidate method. Their properties including hydrophilic–lipophilic balance (HLB) number, water solubility, surface tension, emulsification, foamability, thermotropic liquid crystal, and hygroscopicity were investigated. The results indicated that their HLB number decreased with increase of alkyl chain, the water solubility improved since the hydrophilic oxyethene (─OCH₂CH₂─) fragment was introduced. The dissolution process was entropy driven at 25–45 °C for alkyl chain length n = 6–10. Octyloxyethyl β‐d‐ xylopyranoside had the best foaming ability. Nonyloxyethyl β‐d‐ xylopyranoside had the best foam stability and the emulsifying ability was better in toluene/water system than in rapeseed oil/water system. The surface tension of in aqueous solution dropped to 27.8 mN m^?1 at the critical micelle concentration, and it also showed the most distinct thermotropic liquid phases with cross pattern texture upon heating and the fan schlieren texture on cooling. Hexyloxyethyl β‐d‐ xylopyranoside possessed the strongest hygroscopicity. Based on the effective improvement of water solubility, the prepared alkoxyethyl β‐d‐ xylopyranosides showed excellent surface activity and are expected to develop their practical application as a class of novel sugar‐based surfactants.     

Preparation,Characterization and Properties of Novel Cationic Gemini Surfactants with Rigid Amido Spacer Groups

A series of novel cationic gemini surfactants with rigid amido groups inserted as the spacers, named C ₁₂ ‐PPDA‐C ₁₂ , C ₁₄ ‐PPDA‐C ₁₄ and C ₁₆ ‐PPDA‐C ₁₆ , were synthesized by a two‐step reaction with dimethyl terephthalate, N,N‐dimethyl propylene diamine and alkyl bromide as raw materials. The chemical structures of the prepared compounds were confirmed by IR, ¹H and ¹³C NMR and element analysis. Surface activity properties of the synthesized compounds were investigated by surface tension, electrical conductivity and fluorescence. Increasing the number of carbon atoms in the hydrophobic alkyl chain, decreased the critical micelle concentration (CMC), surface tension at the CMC and the minimum surface area. Other relevant properties including foaming ability and emulsion stability were investigated. The results indicated that the synthesized gemini surfactants possess good surface properties, emulsifying properties and steady foam properties.     

Surface activities,biodegradability and antimicrobial properties of glucosamine derivatives containing alkyl chains

Three series of D-glucosamine derivatives containing an alkyl chain with 8 to 14 atoms, methyl 2-acylamino-2-deoxy-D-glucopyranosides,n-alkyl 2-acetylamino-2-deoxy-D-glucopyranosides andn-alkyl 2-amino-2-deoxy-D-glucopyranoside hydrochlorides, were synthesized, and their surface properties (such as surface tension, critical micelle concentration (CMC), dynamic surface tension and foaming properties), biodegradability and antimicrobial activities were evaluated.n-Alkyl 2-amino-2-deoxy-D-glucopyranoside hydrochlorides containing C8 to C12 carbon chains showed surface activities, a CMC and excellent foaming properties. The α-anomers showed a slightly lower CMC than the β-anomers, indicating less hydrophilicity of the α-anomers. On the other hand, glucosamine derivatives containing amide groups showed poor surface activities in water due to their lower solubilities in water. All glucosamine derivatives containing alkyl chains were biodegraded as well as conventional ethoxylated nonionics by activated sludge from the municipal sewage treatment plant. Methyl 2-acylamino-2-deoxy-D-glucopyranosides andn-alkyl 2-amino-2-deoxy-D-glucopyranoside hydrochlorides showed a broader spectrum of antimicrobial activity than the correspondingn-alkyl glucopyranosides. Among them the C12 derivatives showed the best results.     

Synthesis,Surface Activity,Thermodynamic Parameters,and Performance Evaluation of Branched Carboxylate Gemini Surfactants

Three novel carboxylate gemini surfactants (3C_ntaDA, n = 8, 10, and 12) were synthesized by two simple steps, and their structures were characterized using FT-IR and ¹H NMR. The surface activities of these surfactants were obtained from surface tension measurements at different temperatures, and the surface parameters containing the critical micelle concentration (CMC), surface tension (γ), minimum surface area per molecule ( A_min ), and maximum surface excess concentration ( Γ_max ) were obtained from surface tension measurements. The experimental results show that 3C_ntaDA surfactants have higher surface activities compared with the corresponding conventional surfactants. The thermodynamic parameters of the micellization process were investigated, and the calculated results show that it was an exothermic and spontaneous process. The emulsification and foam performance of these surfactants were also evaluated at different concentrations at 298.15 K.     

Synthesis and Properties of Novel Alkyl Sulfonate Gemini Surfactants

A series of novel dialkyl disulfonate gemini surfactants (2C_n-SCT where n is the carbon number of the hydrophobic chain) were synthesized from cyanuric chloride, aliphatic amine and taurine. The chemical structures of the prepared compounds were confirmed by ¹H NMR, ¹³C NMR, IR spectra, and ESI–MS. Their critical micelle concentrations (CMC) in the aqueous solutions at 25 °C were determined by surface tension and electrical conductivity methods. With the increasing length of the carbon chain, the values of their CMC initially decreased, and then increased with an alkyl chain length of 14. The surface tension measurements of 2C_n-SCT (except for n = 14) determined that there is a low CMC, a great efficiency in lowering the surface tension, and a strong adsorption at the air–water interface. In addition, adsorption and micellization behavior of 2C_n-SCT were estimated from pC ₂₀, the minimum average area per surfactant molecule (A _min), and standard free energy micellization and adsorption ( \Updelta G_\textmic^°  \textand \Updelta G_\textads^° \Updelta G_{\text{mic}}^{^\circ } \,{\text{and}}\,\Updelta G_{\text{ads}}^{^\circ } ). These properties are significantly influenced by the chain length n, and the adsorption is promoted more than the micellization.     

Surface and Biocidal Properties of Gemini Cationic Surfactants Based on Propoxylated 1,6-Diaminohexane and Alkyl Bromides

Two new classes of gemini cationic surfactants—hexanediyl-1,6-bis[(isopropylol) alkylammonium] dibromide {in the abbreviation form: C_nC₆C_n[iPr-OH] and C_nC₆C_n[iPr-OH]₂; alkyl: C_nH_{2n + 1} with n = 9, 10, 12 and 14}—have been synthesized by interaction of alkyl bromides with N,N′-di-(isopropylol)-1,6-diaminohexane and N,N,N′,N′-tetra-(isopropylol)-1,6-diaminohexane. The surface tension, electrical conductivity, and dynamic light scattering (DLS) techniques were used to investigate the aggregation properties of the gemini cationic surfactants in aqueous solution. The formation of critical aggregates at two concentrations in an aqueous solution from obtained gemini cationic surfactants were determined via the tensiometric method. Thus, these gemini cationic surfactants start to form aggregates at concentrations well below their critical micelle concentrations (CMC). The surface properties and the binding degree (β) of the opposite ion were tested against the length of the surfactant hydrocarbon chain and the number of the isopropylol groups in the head group. By applying the DLS technique, it was explored that how the number of isopropylol groups in gemini cationic surfactants with C₁₂H₂₅ chain affects the sizes of micelles at concentrations greater than CMC. It was discovered that the obtained gemini cationic surfactants have a biocidal character.     

Synthesis and study of the surface properties of long-chain alkylnaphthalene sulfonates

Long-chain alkylnaphthalene sulfonates were synthesized by means of a Wurtz-Fittig reaction, and the basic properties were studied in water at 30°C. Through surface tension measurements, the following values were determined: the critical micelle concentration (CMC) and the surface tension at the CMC (γ_CMC). The following values were calculated: area per molecule at the CMC (A_CMC), standard free energy change of micellization (ΔG _mic ^o ), standard free energy of adsorption (ΔG _ad ^o ), and the “efficiency” of a surfactant in reducing surface tension (pC₂₀). The micelle aggregation numbers were measured through steady-state fluorescence-quenching methods. As the chain length of the hydrocarbon of n-alkylnaphthalene sulfonate increased, the Krafft temperature increased, the surface tension decreased, the value of CMC decreased, pC₂₀ increased, ΔG _ad ^o and ΔG _mic ^o became more negative, and the micelle aggregation number increased. The results showed that sodium α-(n-decyl)naphthalene sulfonate (DNS) had a high pC₂₀, low Krafft temperature, and lower CMC than other surfactants in this study. Thus, DNS and the other n-alkylnaphthalene surfactants studied exhibit desirable properties that may be of value in some fields such as detergency, oil recovery, and dyes.     

Relationship of structure to properties of surfactants. 16. Linear decyldiphenylether sulfonates

The properties of some well-characterized sodium linear decyldiphenylether (C₁₀DPE)sulfonates have been studied. Among the properties investigated are dynamic and equilibrium surface tension, critical micelle concentration (CMC), area per molecule at the aqueous solution/air interface, wetting time by the Draves technique, foaming by the Ross-Miles method, solubilization, and hydrotropy. The decyldiphenylether moiety appears to be equivalent to a terminally substituted straight alkyl chain of 16 carbon atoms. The trialkyl- and dialkyl-mono-sulfonates have solubilities of < 0.01 g/dm³ in water, but are readily soluble in hexane. The didecyldiphenyl ether disulfonate (DADS) has a very low CMC value (1.0 × 10⁻⁵ mol dm⁻³) in aqueous 0.1 N Na⁺ solution (NaCl), characteristic of surfactants with two hydrophilic and two hydrophobic groups. It also has a much larger area per molecule at the aqueous solution/air interface than the monodecyldiphenyl-ether monosulfonate (MAMS) and a much higher surface tension at the CMC. MAMS has a much lower surface tension at a surface age of 1 second (γ_1s) than either DADS or the monodecyldiphenylether disulfonate (MADS). In agreement with γ_1s and γ_eq values, wetting times increase in the order: MAMS < DADS < MADS and initial foam heights decrease in the order: MAMS > DADS > MADS. Solubilization for three water-insoluble surfactants decreases in the order: DADS > MAMS > MADS, while hydrotropy is most pronounced with the disulfonates.     

Synthesis and surface-active properties of trimeric-type anionic surfactants derived from tris(2-aminoethyl)amine

Trimeric-type anionic surfactants (3C_ntaAm, where n is a hydrocarbon chain length of 8, 10, or 12) with three hydrocarbon chains and three carboxylate headgroups were synthesized from tris(2-aminoethyl)amine, and their properties were investigated by surface tension, electrical conductivity, dynamic and static light-scattering, fluorescence of pyrene, and emulsification power techniques. The critical micelle concentrations (CMC) of 3C_ntaAm were 0.00092–0.00834 mmol dm⁻³, and the surface tensions at the CMC were 33.3–39.9 mN m⁻¹. The areas per molecule occupied by 3C₁₀taAm and 3C₁₂taAm were extremely small, showing they were highly compact at the air/water interface. In addition, adsorption or micellization behavior of 3C_ntaAm was estimated by parameters such as pC ₂₀ (the efficiency of surface adsorption), CMC/C ₂₀ (the ease of adsorption relative to the ease of micellization), and ΔG _M ^o (Gibbs energy of micellization). Dynamic and static light-scattering mesurements of 3C_ntaAm showed a hydrodynamic radius of 45–61 nm above the CMC and aggregation numbers of 10–82 at the CMC, respectively. The fluorescence intensity ratio of the first to the third band in the emission spectra of pyrene started to lower from far above the CMC for 3C₈taAm and 3C₁₀taAm, and below the CMC for 3C₁₂taAm. This suggests that loose micelles or premicellar aggregates are formed in solutions. Mixtures of aqueous solutions of 3C_ntaAm and toluene formed oil-in-water-type emulsions, and the stabilizing abilities were in the order of 3C₈taAm>3C₁₀taAm>3C₁₂taAm. The degree of emulsification of 3C₈taAm remained at 69% after 24 h of standing. Thus, 3C_ntaAm exhibited unique properties superior to monomeric or dimeric surfactants that were significantly influenced by their hydrocarbon chain lengths.     

Micellization and Adsorption Behaviors of New Reactive Polymerizable Surfactants Based on Modified Nonyl Phenol Ethoxylates

The synthesis and characterization of a series of polymerizable surfactants based on alkyl phenol ethoxylate backbone and carboxylic or anhydride chain ends were investigated. Surface activities of these polymerizable surfactants were investigated to correlate their structure and their performances. The new bifunctional surfmers were prepared by reacting polyoxyethylene 4-nonyl-2-propylene-phenol nonionic reactive surfactants with maleic anhydride. The chemical structure of the prepared surfactants was characterized by ¹³C and ¹H NMR analyses. The surface activities of the modified polymerizable surfactants were measured from the adsorption isotherm measurements which were determined from the relationship between the concentrations and surface tension of surfactants in aqueous medium at different temperatures. Critical micelle concentration (CMC) values were determined for water soluble surfactants. It was found that CMC decreases with the incorporation of the anhydride and acid groups in the chemical structure of polyoxyethylene 4-nonyl -2-propylene-phenol nonionic surfactant. surface-active parameters such as area per molecule at the interface (A _min), surface excess concentration (Γ_max) and the effectiveness of surface tension reduction (π_CMC) were measured from the adsorption isotherms of the modified surfactants. Some thermodynamic data for the adsorption process were calculated and discussed. The data indicated that the new surfmers are more reactive than the simple polyoxyethylene 4-nonyl-2-propylene-phenol and more adsorbed at interfaces. We have performed a preliminary experiment to explore the emulsification efficiency of the newly synthesized reactive surfactants in equal volume oil–water emulsions. Different emulsion types and stabilities were obtained.     

Synthesis and Properties of Dissymmetric Gemini Surfactants

A series of novel dissymmetric gemini cationics surfactants was synthesized by three-step reactions. The dissymmetric gemini surfactants contain a dodecanoic acid dimethylethylamine ester as the constant cationic part on one side of the hydroxypropyl center and a similar other cationic part, but with a different acid length (from octanoic to palmitic), on the other side. The critical micelle concentration (CMC) and the effectiveness of surface tension reduction (γ _CMC) were determined. The surface tension measurements of dissymmetric gemini surfactants showed good water solubility, and low CMC had great efficiency in lowering the surface tension and a strong adsorption at the air/water interface. The CMC was observed to increase initially with the increase of the ester bond alkyl group. They also showed good foaming properties and wetting capabilites.     

Preparation and properties of double- or triple- chain surfactants with two sulfonate groups derived fromN- Acyldiethanolamines

Bis(sulfonate) types of amphipathic compounds with three long- chain alkyl groups were prepared by the reaction ofN- (long- chain acyl)diethanolamine diglycidyl ethers with long- chain fatty alcohols, followed by the reaction with propanesultone. The diglycidyl ethers were easily obtained from the correspondingN- acyldiethanolamines and epichlorohydrin in the presence of a phasetransfer catalyst. The same types of compounds with two longchain alkyl groups were also prepared from Nacetyldiethanolamine according to similar procedures. All these new double- or triple- chain surfactants were soluble in water and showed much better micelle forming and ability to lower surface tension than general types of single- chain surfactants with one sulfonate group. The critical micelle concentration (CMC) and γ_CMC values of the triple- chain compounds were still much smaller than those of the corresponding double- chain compounds with two common alkyl groups. The efficiency of adsorption at the water/air interface (pC₂₀) of these surfactants was very high. Their foaming properties, wetting ability toward a felt chip, and lime- soap dispersing ability were measured. To whom correspondence should be addressed at Department of Applied Chemistry, Faculty of Engineering, Osaka University, Yamadaoka 2-1, Suita, Osaka 565, Japan.     

Synthesis and surface measurements of surfactants derived from dehydroabietic acid

Dehydroabietates with poly(ethylene oxide) chains of average m=12, 17, and 45 units [DeHab(E) _m ] were synthesized. The adsorption at the liquid-vapor interface was measured, and the adsorbed amount and critical micelle concentrations (CMC) were determined. The foamability, the foam stability, wetting properties, and cloud points, with and without salt content, were studied. The results were compared with common linear alkyl ethoxylates, nonylphenol ethoxylates, and cholesterol ethoxylates. The dehydroabietic acid as hydrophobe was found to result in the same CMC as a linear dodecyl chain. DeHab(E)₄₅ was found to be insoluble above 400 mg/L, but the surface tensions at lower concentrations were similar to those of the C_11–13E_38–40 surfactants, which exhibit CMC in aqueous media. The foaming behavior of the DeHab(E)₁₂ and DeHab(E)₁₇ surfactants was about the same as for common linear C _n E _m surfactants. The foamability as well as the foam stability increased with ethylene oxide (EO) chain length. The cloud point was depressed by increased salt concentration and increased with the number of EO units in the head group. The cloud point was significantly lower than for the corresponding surfactant with a dodecyl chain with similar EO chain length. The wetting results, obtained by measuring the contact angle at similar surface tensions, indicate that surfactants of the DeHab(E) _m type are more efficient wetting agents than both disaccharide sugar surfactants and C _n E _m type surfactants.     

Reaction between Zinc and Hydrochloric Acid in Solutions Containing Alkyltrimethylammonium Bromide CnTAB (n = 8, 10, and 12) Cationic Surfactants: Influence of Surfactant Chain Length

The influence of C_nTAB cationic surfactant chain length (n = 8, 10, and 12) on the reaction rate of zinc powder and 0.1 M HCl hydrochloric acid in aqueous solutions was determined at room temperature. Solutions of single surfactants consisting of dodecyl, decyl, and octyl-trimethyl-ammonium bromide surfactants C_nTAB were prepared at room temperature. From the surface tension and conductivity measurements, the critical micelle concentration (CMC) values of the three surfactants were obtained in the presence and absence of the acid. No significant change was observed for CMC values in pure water and in 0.01 M HCl. Adsorption of C_nTAB surfactants onto 1% wt./vol zinc (in powder form), using surface tension measurements, was then investigated. The adsorption tendency of C_nTAB surfactants onto zinc powder followed the order: C₈TAB > C₁₀TAB > C₁₂TAB. The role of surfactants in the reaction rate between zinc powder and 0.1 M M HCl was then investigated using conductivity measurements. A significant difference in the reaction rate was found depending on the surfactant chain length. Reaction times of 3830, 4963, 14,172, and 20,053 s were found for the zinc reaction with (0.1 M HCl), (0.1 M HCl + 40 mM C₈TAB), (0.1 M HCl + 40 mM C₁₀TAB), and (0.1 M HCl + 40 mM C₁₂TAB), respectively, suggesting a significant dependency of the reaction rate on the C_nTAB chain length. Finally, some corrosion parameters such as the corrosion rate, corrosion inhibition efficiency, and their dependency on C_nTAB chain length were presented and discussed.     

Synthesis and Properties of Novel Phenylenediamine Gemini Surfactants

In the present work, a two-step method was adopted to synthesize a series of novel Gemini surfactants using N,N-dimethylalkyl amines (alkyl length = C₁₂, C₁₆ and C₁₈), epichlorohydrin, and n-phenyllenediamine as starting materials. The products were characterized using mass spectroscopy (MS) and nuclear magnetic resonance spectroscopy (¹H NMR). Systematic experiments were conducted to evaluate their surface activity, foaming properties, and antibacterial performance. Results showed the critical micelle concentrations (CMC) of the C₁₂-based, C₁₆-based, and C₁₈-based phenylenediamine surfactants were 3.295 × 10⁻³, 2.532 × 10⁻⁴, and 3.140 × 10⁻⁴ mol L⁻¹ at 298 K, respectively, with corresponding surface tension (γ_cmc) values of 28.24, 31.95, and 35.06 mN m⁻¹ under the same conditions. The Gemini surfactants showed not only good surface activity and foaming properties, but also demonstrated good antimicrobial performance against Gram-positive and Gram-negative bacteria and fungi.     

Synthesis and properties of novel alkyl sulfate gemini surfactants

Four anionic gemini surfactants of the sulfate type C₁₂C_nC₁₂, where n is the spacer chain length (n = 3, 4, 6, and 10) were synthesized. The structures of these surfactants were confirmed by FT‐IR, ¹H NMR, ESI mass spectra (ESI‐MS), and elemental analysis. The surface‐active properties of these compounds were investigated by means of surface tension, electrical conductivity, and fluorescence measurements. Premicellar aggregations were found for the four gemini surfactants, as revealed by the conductivity measurement. The formation of premicellar aggregates may account for the discrepancy between the critical micelle concentration (cmc) obtained by the surface tension and conductivity measurement. The cmc values of these gemini surfactants were much lower than that of sodium dodecylsulfate (SDS) and decreased monotonously with the increase of spacer chain length from 3 to 10. The effect of spacer chain length on the performance properties like foaming, emulsion stability, and lime soap dispersing ability were also studied and discussed. Practical applications : Alkyl sulfate surfactants are one of the most widely used surfactants. The new alkyl sulfate gemini surfactants synthesized in our study are more surface‐active than sodium dodecylsulfate. These gemini surfactants possess low critical micelle concentrations, high emulsion stability, and excellent lime soap dispersing ability. They have potential applications in the fields of cosmetics, detergents, etc.     

Retracted: Synthesis,Characterization, and Surface Activities of Polymeric Cationic Thiol Surfactants in Aqueous Medium

A series of cationic polyurethane surfactants [PQ_8-18] were synthesized by the reaction of alkyl bromoacetate (namely: octyl-, decyl-, dodecyl-, tetradecyl-, hexadecyl-, and octadecyl bromoacetate) as quaternizing agents and modified polyurethane contains tertiary amine species. Modified polyurethane was prepared by the reaction of toluene diisocyanate (TDI) and triethanol amine monomercaptoacetate. The chemical structures of the prepared surfactants were confirmed using elemental analysis, Fourier transform infrared spectroscopy (FTIR), and Proton nuclear magnetic resonance (¹H NMR) spectroscopy. The molecular weight measurements of the prepared polymers showed that the segments of each polymer contain average 10 units of the urethane-triethanol amine mercaptoacetate. The surface activities of the prepared surfactants including: surface tension (γ), effectiveness ( π_cmc), concentration at micelle formation (CMC), efficiency (Pc₂₀), maximum concentration at the interface (Γ_max), and the average area occupied by each surfactant molecule at the interface at equilibrium ( A _min) of surfactants solutions were established at 25°C. The surface tension and the critical micelle concentration values of the prepared surfactants were gradually decreased by the gradual increase of their alkyl chain length. The prepared cationic surfactants showed efficient activity as inhibitors for dissolution of carbon steel in an acidic medium and also as a biocide against the growth of bacteria, fungi, and yeast.     

Synthesis and Surface Properties of Disodium Monoalkyl Diphenyl Oxide Disulfonate

Disodium monoalkyl diphenyl oxide disulfonates (MADS) with different carbon chains (C_n‐MADS, n = 8, 12, 16) were synthesized through the steps of alkylation‐sulfonation‐neutralization using fatty alcohols (C₈, C₁₂, C₁₆), diphenyl oxide and fuming sulfuric acid (20 % free SO₃) as reagents. The structures of the products were identified by infrared spectroscopy and electrospray ionization‐mass spectrometry. The surface properties, emulsification, wettability alteration and salinity and hardness tolerance of the products were systematically investigated. The results show that the critical micelle concentration (CMC) of C₈MADS, C₁₂MADS and C₁₆MADS are 7.24 × 10^?3, 1.49 × 10^?3 and 2.09 × 10^?4 mol/L. The surface tensions at the CMC (γ_CMC) of each product are 37.5, 38.9 and 46.8 mN/m. The negative logarithm of the surfactant concentration in the bulk phase required to produce a 20 mN/m reduction in the surface tension of the solvent (pC₂₀) increases with the increase in the alkyl chain length. The emulsifying ability of C₁₂‐MADS is better than C₈‐MADS and C₁₆‐MADS, and the MADS showed less oil‐wet nature. The salinity and hardness tolerance of MADS is much stronger than that of conventional surfactants.