Adaptive robust motion/force control of holonomic-constrained nonholonomic mobile manipulators.

In this paper, adaptive robust force/motion control strategies are presented for mobile manipulators under both holonomic and nonholonomic constraints in the presence of uncertainties and disturbances. The proposed control is robust not only to parameter uncertainties such as mass variations but also to external ones such as disturbances. The stability of the closed-loop system and the boundedness of tracking errors are proved using Lyapunov stability synthesis. The proposed control strategies guarantee that the system motion converges to the desired manifold with prescribed performance and the bounded constraint force. Simulation results validate that the motion of the system converges to the desired trajectory, and the constraint force converges to the desired force.     

Robust adaptive control for mobile manipulators

This paper addresses the trajectory tracking control of a nonholonomic wheeled mobile manipulator with parameter uncertainties and disturbances. The proposed algorithm adopts a robust adaptive control strategy where parametric uncertainties are compensated by adaptive update techniques and the disturbances are suppressed. A kinematic controller is first designed to make the robot follow a desired end-effector and platform trajectories in task space coordinates simultaneously. Then, an adaptive control scheme is proposed, which ensures that the trajectories are accurately tracked even in the presence of external disturbances and uncertainties. The system stability and the convergence of tracking errors to zero are rigorously proven using Lyapunov theory. Simulations results are given to illustrate the effectiveness of the proposed robust adaptive control law in comparison with a sliding mode controller.     

Robust Adaptive Control of Cooperating Mobile Manipulators With Relative Motion

In this paper, coupled dynamics are presented for two cooperating mobile robotic manipulators manipulating an object with relative motion in the presence of uncertainties and external disturbances. Centralized robust adaptive controls are introduced to guarantee the motion, and force trajectories of the constrained object converge to the desired manifolds with prescribed performance. The stability of the closed-loop system and the boundedness of tracking errors are proved using Lyapunov stability synthesis. The tracking of the constraint trajectory/force up to an ultimately bounded error is achieved. The proposed adaptive controls are robust against relative motion disturbances and parametric uncertainties and are validated by simulation studies.     

Nonlinear adaptive control of master–slave system in teleoperation

This paper is devoted to the nonlinear control design problem to achieve stability of master–slave manipulators in teleoperation system and its transparency in the sense of motion/force tracking. Nonlinear adaptive controllers are bilaterally designed for both master and slave sites to guarantee the stability of whole system and motion tracking performance. Global boundedness of the overall adaptive system and asymptotic motion (velocity/position) tracking are established. Especially, the concept of “virtual master manipulator” is introduced to increase degree of freedom of control design for force tracking performance. The resulting force tracking error depends only on the acceleration of the designed virtual master manipulator. Accurate dynamic parameters of manipulators, their acceleration information as well as models of human operator and environment are not required in the control design. Another important feature of our approach is the relaxation for the trade-off between motion and force tracking performances.     

High Precision Constrained Grasping with Cooperative Adaptive Handcontrol

A method for high precision constrained object manoeuvering for non-redundant rigid multifinger hands is proposed. A passivity-based adaptive cooperative control scheme carries out compensation of all uncertain inertial and dynamic friction forces to guarantee asymptotic tracking of all contact forces and joint position-orientation trajectories over orthogonal force- and position-based impedance error manifolds. Optimal internal and external force trajectories are obtained to minimize the contact forces onto the constrained object while exerting a given desired contact force onto the environment. The simulation study of two robot fingers manipulating a constrained object for combined fast and slow velocity regimes shows that when the dynamic friction compensation is turned on tracking errors decrease tenfold.     

Adaptive-backstepping force/motion control for mobile-manipulator robot based on fuzzy CMAC neural networks

In this paper, an adaptive backstepping fuzzy cerebellar-model-articulation-control neural-networks control （ABFCNC） system for motion/force control of the mobile-manipulator robot （MMR） is proposed. By applying the ABFCNC in the tracking-position controller, the unknown dynamics and parameter variation problems of the MMR control system are relaxed. In addition, an adaptive robust compensator is proposed to eliminate uncertainties that consist of approximation errors, uncertain disturbances. Based on the tracking position-ABFCNC design, an adaptive robust control strategy is also developed for the nonholonomicconstraint force of the MMR. The design of adaptive-online learning algorithms is obtained by using the Lyapunov stability theorem. Therefore, the proposed method proves that it not only can guarantee the stability and robustness but also the tracking performances of the MMR control system. The effectiveness and robustness of the proposed control system are verified by comparative simulation results.     

Robust adaptive control of uncertain force/motion constrained nonholonomic mobile manipulators

In this paper, force/motion tracking control is investigated for nonholonomic mobile manipulators with unknown parameters and disturbances under uncertain holonomic constraints. The nonholonomic mobile manipulator is transformed into a reduced chained form, and then, robust adaptive force/motion control with hybrid variable signals is proposed to compensate for parametric uncertainties and suppress bounded disturbances. The control scheme guarantees that the outputs of the dynamic system track some bounded auxiliary signals, which subsequently drive the kinematic system to the desired trajectory/force. Simulation studies on the control of a wheeled mobile manipulator are used to show the effectiveness of the proposed scheme.     

Enhanced adaptive motion tracking control of piezo-actuated flexure-based four-bar mechanisms for micro/nano manipulation

This paper establishes and investigates an enhanced adaptive motion tracking control methodology for piezo-actuated flexure-based four-bar micro/nano manipulation mechanisms. This control methodology is proposed for tracking desired motion trajectories in the presence of unknown or uncertain system parameters, non-linearities including the hysteresis effect, and external disturbances in the motion systems. In this paper, the equations for the modelling of a flexure-hinged four-bar micro/nano mechanism are established. These include the angular stiffness, ‘static’ linear stiffness, equation of motion, and lowest structural resonance of the mechanism. In addition, a lumped parameter dynamic model that combines the piezoelectric actuator and the micro/nano mechanism is established for the formulation of the proposed control methodology. The stability of the control approach is analysed, and the convergence of the position and velocity tracking errors to zero is proven theoretically. A precise tracking performance in following a desired motion trajectory is also demonstrated in the experimental study. An important advantage of this control methodology is that the approach requires only a knowledge of the estimated lumped system parameters in the physical realisation. This proposed motion tracking control methodology is very attractive for the implementation of high performance flexure-based micro/nano manipulation control applications.     

Trajectory tracking control of a pneumatically actuated 6-DOF Gough–Stewart parallel robot using Backstepping-Sliding Mode controller and geometry-based quasi forward kinematic method

In this paper, the trajectory tracking control of a 6-DoF pneumatically actuated Gough–Stewart parallel robot is investigated. The dynamic model of each link, comprising of a pneumatic actuator and a proportional electrical valve is extracted with the aim of obtaining the corresponding state space representation of the pneumatic system. Unknown parameters of the dynamic model consisting friction force of the cylinder and parameters of the proportional valve are identified by employing genetic algorithm. Position control of the pneumatic actuator is performed based on Back-Stepping Sliding Mode controller according to the dynamic model of the system. As such trajectory tracking control is performed for different trajectories by employing a rotation sensor and calculated position based on joint space and task space simultaneously. Desired sinusoidal trajectories with pure motions are tracked with root mean square error of the pure translations and rotations lower than 0.85 (cm) and 1.9 (deg), respectively. The results reveal that the trajectory is tracked by the Back-Stepping Sliding Mode controller properly. This shows the efficiency of the control strategy and the proposed method for calculating the position of the end-effector.     

Adaptive inverse dynamics control of robots with uncertain kinematics and dynamics

It has been about two decades since the first globally convergent adaptive tracking controller was derived for robots with dynamic uncertainties. However, not until recently has the problem of concurrent adaptation to both the kinematic and dynamic uncertainties found its solution. This adaptive controller belongs to passivity-based control. Though passivity-based controllers have many attractive properties, in general, they are not able to guarantee the uniform performance of the robot over the entire workspace. Even in the ideal case of perfect knowledge of the manipulator parameters, the closed-loop system remains nonlinear and coupled. Thus the closed-loop tracking performance is difficult to quantify, while the inverse dynamics controllers can overcome these deficiencies. Therefore, in this work, we will develop a new adaptive Jacobian tracking controller based on the inverse manipulator dynamics. Using the Lyapunov approach, we have proved that the end-effector motion tracking errors converge asymptotically to zero. Simulation results are presented to show the performance of the proposed controller.     

具有时滞的柔性关节多机械臂协同自适应位置/力控制

由于关节机械臂长期运行后,齿轮间隙扩大产生的时间滞后将使得系统跟踪性能降低.针对此问题,本文提出了一种自适应位置/力控制策略来保证闭环系统稳定性以及位置/力跟踪性能.首先,对多机械臂和物体系统进行任务空间动力学建模.随后,利用Pade理论将时间滞后近似为二阶有理分式.同时,利用神经网络自适应算法克服模型建模误差对系统稳定性的影响,利用同时包含位置误差和力误差的线性滑模项,设计位置/力控制器.通过李雅普诺夫稳定性理论,证明控制策略能实现位置误差和内力误差的渐近收敛.最后,仿真验证证明所设计控制策略的有效性.     

Direct adaptive impedance control of robot manipulators

This article presents an adaptive scheme for controlling the end-effector impedance of robot manipulators. The proposed control system consists of three subsystems: a simple “filter” that characterizes the desired dynamic relationship between the end-effector position error and the end-effector/environment contact force, an adaptive controller that produces the Cartesian-space control input required to provide this desired dynamic relationship, and an algorithm for mapping the Cartesian-space control input to a physically realizable joint-space control torque. The controller does not require knowledge of either the structure or the parameter values of the robot dynamics and is implemented without calculation of the robot inverse kinematic transformation. As a result, the scheme represents a general and computationally efficient approach to controlling the impedance of both nonredundant and redundant manipulators. Furthermore, the method can be applied directly to trajectory tracking in free-space motion by removing the impedance filter. Computer simulation results are given for a planar four degree-of-freedom redundant robot under adaptive impedance control. These results demonstrate that accurate end-effector impedance control and effective redundancy utilization can be achieved simultaneously by using the proposed controller.     

Motion/force control scheme for electrically driven cooperative multiple mobile manipulators

This paper presents the motion and force control problem of rigid-link electrically driven cooperative mobile manipulators handling a rigid object. Although, the motion/force control problem of cooperative mobile manipulators has been enthusiastically studied. But there is little research on the motion/force control of electrically driven cooperative mobile manipulators. Due to the inclusion of the actuator dynamics with the manipulator’s dynamics, the controller exhibits some important characteristics. For the electromechanical system, we have designed a novel controller at the dynamic level as well as at the actuator level. In the proposed control scheme, at the dynamic level, uncertain non-linear mechanical dynamics is approximated with a hybrid controller containing model-based control scheme combined with model-free neural network based control scheme together with an adaptive bound. The adaptive bound is used to suppress the effects of external disturbances, friction terms, and reconstruction error of the neural network. At the actuator level, for the approximation of the unknown electrical dynamics, the model-free neural network is utilized. The developed control scheme provides that the position tracking errors, as well as the internal force, converge to the desired levels. Additionally, direct current motors are also controlled in such a way that the desired currents and torques can be attained. In order to make the overall system to be asymptotically stable, online learning of the weights and the parameter adaptation of the parameters is utilized in the Lyapunov function. The superiority of the developed control method is carried out with the numerical simulation results and its superior robustness is shown in a comparative manner.     

Constrained motion control of flexible robot manipulators based on recurrent neural networks

In this paper, a neural network approach is presented for the motion control of constrained flexible manipulators, where both the contact force everted by the flexible manipulator and the position of the end-effector contacting with a surface are controlled. The dynamic equations for vibration of flexible link and constrained force are derived. The developed control, scheme can adaptively estimate the underlying dynamics of the manipulator using recurrent neural networks (RNNs). Based on the error dynamics of a feedback controller, a learning rule for updating the connection weights of the adaptive RNN model is obtained. Local stability properties of the control system are discussed. Simulation results are elaborated on for both position and force trajectory tracking tasks in the presence of varying parameters and unknown dynamics, which show that the designed controller performs remarkably well.     

一种机器人自适应阻抗控制算法

本文针对参数未知及负载不确定下的机器人运动控制问题，提出了一种形式非常简洁的自适应阻抗控制算法，它能使机器人系统跟踪目标阻抗并保证跟踪误差的渐近稳定性及机器人与外界整体系统的稳定性，本文还就无直接力反馈控制方法进行了讨论。     

Adaptive compliant force–motion control of coordinated non-holonomic mobile manipulators interacting with unknown non-rigid environments

Most studies on the coordination control of multiple mobile manipulators system assume exact knowledge of system dynamics and deal only with motion control. However, actual applications may involve the tasks in which multiple coordinated mobile manipulators system interacts with rigid or non-rigid working surfaces. In this paper, we consider multiple mobile manipulators grasping a rigid object in contact with a deformable working surface, whose geometric and real physical parameters are unknown but boundedness of physical parameters is known. The contact forces are nonlinear and difficult to model. A neuro-adaptive control for coordinated mobile manipulators is proposed for robust force/motion tracking. The control law is based on the philosophy of the parallel approach, in which the control problem is divided into three subspaces and the adaptive techniques are employed to deal with the uncertain environmental constraints, disturbances, and unknown robotic and object dynamics. The proposed adaptive force–motion controller guarantees the tracking errors of motion and force trajectories converge to zero. Simulation examples are presented to verify the effectiveness of the proposed control.     

Adaptive control of redundant multiple robots in cooperative motion

A redundant robot has more degrees of freedom than what is needed to uniquely position the robot end-effector. In practical applications the extra degrees of freedom increase the orientation and reach of the robot. Also the load carrying capacity of a single robot can be increased by cooperative manipulation of the load by two or more robots. In this paper, we develop an adaptive control scheme for kinematically redundant multiple robots in cooperative motion.In a usual robotic task, only the end-effector position trajectory is specified. The joint position trajectory will therefore be unknown for a redundant multi-robot system and it must be selected from a self-motion manifold for a specified end-effector or load motion. In this paper, it is shown that the adaptive control of cooperative multiple redundant robots can be addressed as a reference velocity tracking problem in the joint space. A stable adaptive velocity control law is derived. This controller ensures the bounded estimation of the unknown dynamic parameters of the robots and the load, the exponential convergence to zero of the velocity tracking errors, and the boundedness of the internal forces. The individual robot joint motions are shown to be stable by decomposing the joint coordinates into two variables, one which is homeomorphic to the load coordinates, the other to the coordinates of the self-motion manifold. The dynamics on the self-motion manifold are directly shown to be related to the concept of zero-dynamics. It is shown that if the reference joint trajectory is selected to optimize a certain type of objective functions, then stable dynamics on the self-motion manifold result. The overall stability of the joint positions is established from the stability of two cascaded dynamic systems involving the two decomposed coordinates.     

Adaptive position/force control of robot manipulators withoutvelocity measurements: theory and experimentation

In this paper, we design an adaptive position/force controller for robot manipulators during constrained motion. The proposed controller can compensate for parametric uncertainty while only requiring measurements of link position and end-effector force. A filtering technique is utilized to produce a pseudo-velocity error signal and thus, eliminate the need for link velocity measurements. The control strategy provides semiglobal asymptotic tracking performance for the end-effector position and the interaction force between the constraint and the end-effector. An experimental implementation of the proposed controller on a two-link planar robot is also presented.     

Adaptive Motion/Force Tracking Control for a Class of Mobile Manipulators

In this paper, modeling and adaptive motion/force tracking control is considered for a class of mobile manipulators under the holonomic and affine constraints with the presence of uncertainties and disturbances. Based on a suitable reduced dynamic model, adaptive controllers are proposed to ensure that the states of a closed‐loop system asymptotically track desired trajectories while the constraint force remains bounded by tuning design parameters. Detailed simulation results confirm the effectiveness of the control strategy.     

Nonlinear control techniques for an atomic force

Two nonlinear control techniques are proposed for an atomic force microscope system. Initially ,a learning- based control algorithm is developed for the microcantilever-sample system that achieves asymptotic cantilever tip tracking for periodic trajectories. Specifically ,the control approach utilizes a learning- based feedforward term to compensate for periodic dynamics and high- gain terms to account for non-periodic dynamics. An adaptive control algorithm is then developed to achieve asymptotic cantilever tip tracking for bounded tip trajectories despite uncertainty throughout the system parameters. Simulation results are provided to illustrate the efficacy and performance of the control strategies.