Effect of nonlinear partial slip and thermal radiation on Oldroyd 8‐constant fluid in a channel with convective boundary condition

This investigation deals with the effects of nonlinear slip, nonlinear thermal radiation, and non‐Newtonian flow parameters on heat transfer of an incompressible magnetohydrodynamic steady flow of an Oldroyd 8‐constant fluid through two parallel infinite plates with convective cooling. The Rosseland approximation is adopted to simulate the radiation effects. Heat exchange with the surrounding at the surfaces is assumed to obey Newton's law of cooling. The system of coupled and highly nonlinear ordinary differential equations governing the model is solved numerically using the method of weighted residual. The combined effects of non‐Newtonian flow parameters, velocity slip parameter, magnetic field parameter, Biot numbers, thermal radiation on the fluid velocity, temperature distributions, skin friction, and the Nusselt number are presented graphically and discussed. It is found that the velocity slip has an increasing effect on the fluid velocity and temperature profiles. For larger values of the thermal radiation parameter, the temperature profile and the Nusselt number are noticed to be increased.     

Significance of thermal radiation on dusty fluid flow over a stretching rotating disk with convective boundary condition

This paper explores the flow of dusty fluid over a stretching rotating disk with thermal radiation. Further, the convective boundary condition is considered in this modeling. The described governing equations are reduced to ordinary differential equations by using apt similarity transformations and then they are numerically solved using Runge–Kutta–Fehlberg-45 scheme. To gain a clear understanding of the current boundary layer flow problem, the graphical results of the velocity and thermal profiles, shear stresses at the disk, and Nusselt number are drawn. Results reveal that the increase in the value of the porosity parameter reduces the velocity of both particle and fluid phases. The increase in the value of the Biot number improves the temperature gradient of both particle and fluid phases. The rise in the value of the radiation parameter advances the heat transference of both phases. The rise in the value of the Biot number improves the rate of heat transfer. Finally, increasing the value of the radiation parameter improves the rate of heat transfer.     

A numerical approach for MHD Al2O3–TiO2/H2O hybrid nanofluids over a stretching cylinder under the impact of shape factor

In this research, the heat transfer and magnetohydrodynamic stagnation point flow of a (Al₂O₃–TiO₂/H₂O) hybrid nanofluid past a stretching cylinder under the impact of heat generation, nonlinear thermal radiation, and nanoparticles shape factor has been analyzed using the Runge‐Kutta‐Fehlberg fifth order numerically method. The impact of changing diverse parameters, such as nanoparticles shape factor, named hexahedron and lamina, on temperature and velocity profiles and induced magnetic field, has been explored. The main motivation of this article is using hybrid nanoparticles to improve heat transfer. The novel findings of the current research illustrate that the Lorentz force produced by increasing magnetic field parameter () causes a decline in velocity profile; also increasing solar radiation, shape factor and the use of hybrid nanoparticles caused increment in the temperature profile. Furthermore, the lamina nanoparticle shape has more impact on Nusselt number () compared with hexahedron‐shaped nanoparticle.     

Terrific effect of H2 on 3D free convection MHD flow of C2H6O2H2O hybrid base fluid to dissolve Cu nanoparticles in a porous space considering the thermal radiation and nanoparticle shapes effects

In this article, the physical aspects of natural convection magnetohydrodynamic flow of Cu/Ethylene glycol-water nanofluid past a porosity vertical stretching sheet under impact of thermal radiation, shape and slip factor and suction/injection process has been analyzed using Runge- Kutta Fehlberg fifth order (RKF 5) numerical method. The influence of variable, different parameters such as nanoparticles shape factor, named hexahedron and Lamina on temperature and velocity profiles are exemplified quantitatively through graphs. Outputs demonstrate thermal radiation impact causes to produce heat and increase the temperature profile by increasing nanofluid molecules energy. Lamina shape nanoparticle has a greater effect on increasing Nusselt number (Nu) compared to hexahedron.     

Thermal radiation and magnetic field effects on squeezing motion analysis for Cu–kerosene and Cu–water nanofluids

This article examines the squeezing motion of Cu–kerosene and Cu–water nanofluids with thermal radiation and magnetic field between two parallel sheets. By appropriate transformation, the governing nonlinear partial differential equations are converted into ordinary differential equations and then solved numerically by the Runge–Kutta technique. The motion characteristics have been examined with graphs by relevant parameters. It is observed that fluid temperature reduces if squeezing parameter, thermal radiation, and Hartmann number increases, but fluid temperature improves if nanoparticle volume fraction, Eckert number, and Prandtl number increases and it is observed that liquid momentum improves if the squeezing parameter increases, but fluid velocity reduces if nanoparticle volume fraction and Hartmann number increases.     

Thermal slip and radiative heat transfer effects on electro‐osmotic magnetonanoliquid peristaltic propulsion through a microchannel

A mathematical study is described to examine the concurrent influence of thermal radiation and thermal wall slip on the dissipative magnetohydrodynamic electro‐osmotic peristaltic propulsion of a viscous nanoliquid in an asymmetric microchannel under the action of an axial electric field and transverse magnetic field. Convective boundary conditions are incorporated in the model and the case of forced convection is studied, that is, thermal and species (nanoparticle volume fraction) buoyancy forces neglected. The heat source and sink effects are also included and the diffusion flux approximation is employed for radiative heat transfer. The transport model comprises the continuity, momentum, energy, nanoparticle volume fraction, and electric potential equations with appropriate boundary conditions. These are simplified by negating the inertial forces and invoking the Debye–Hückel linearization. The resulting governing equations are reduced into a system of nondimensional simultaneous ordinary differential equations, which are solved analytically. Numerical evaluation is conducted with symbolic software (MATLAB). The impact of different control parameters (Hartmann number, electro‐osmosis parameter, slip parameter, Helmholtz–Smoluchowski velocity, Biot numbers, Brinkman number, thermal radiation, and Prandtl number) on the heat, mass, and momentum characteristics (velocity, temperature, Nusselt number, etc) are presented graphically. Increasing Brinkman number is found to elevate temperature magnitudes. For positive Helmholtz–Smoluchowski velocity (reverse axial electrical field) temperature is strongly reduced, whereas for negative Helmholtz–Smoluchowski velocity (aligned axial electrical field), it is significantly elevated. With increasing thermal slip, nanoparticle volume fraction is also increased. Heat source elevates temperatures, whereas heat sink depresses them, across the microchannel span. Conversely, heat sink elevates nanoparticle volume fraction, whereas heat source decreases it. Increasing Hartmann (magnetic) parameter and Prandtl number enhance the nanoparticle volume fraction. Furthermore, with increasing radiation parameter, the Nusselt number is reduced at the extremities of the microchannel, whereas it is elevated at intermediate distances. The results reported provide a good insight into biomimetic energy systems exploiting electromagnetics and nanotechnology, and, furthermore, they furnish a useful benchmark for experimental and more advanced computational multiphysics simulations.     

Exploration of irreversibility and thermal motion of a nanoliquid with the Newton boundary condition by using the Darcy–Forchheimer rule

This study has been conducted to focus on magnetohydrodynamic flow of a nanoliquid through a microchannel in the presence of a magnetic field. In this article, carbon nanotubes suspended in an aqueous medium were our considered fluid, and we focused on both singlewall and multiwall carbon nanotubes. The numerical calculations have been made via the fourth- and fifth-order Runge–Kutta–Fehlberg method. The flow of the nanoliquid in a microchannel with porosity has been scrutinized with the existence of mutual effects, like, the nanoparticle volume fraction, suction or injection, thermal-dependent heat source, convective boundary conditions, Darcy friction factor, and thermal motion of the nanoparticles. The influence of every major parameter on the profile of momentum, temperature, and entropy generation has been displayed graphically, and we discuss their physical aspects. The numerical outcomes demonstrated that the momentum profile augmented with the buoyancy force, angle of inclination, and Darcy number. Thermal energy was enriched with the heat source parameter, Darcy number, and Hartmann number. The irreversibility rate declined with the volume fraction of nanoparticle and radiation parameter, while it increases with the buoyancy force, Eckert parameter, and Darcy friction factor.     

Flow and heat transfer analysis of MHD third-grade fluid flow through a vertical microchannel subjected to entropy generation

This paper analyses the generation of entropy in an electrically conducting third-grade fluid through a vertical channel considering the variable thermal conductivity. Aspects of radiation, viscous dissipation, porous medium, Joule heating, convective boundary condition, and heat generation are studied. Nonlinear systems of ordinary differential equations are obtained via applying suitable dimensionless variables. After that, the system is solved with the aid of using the Runge–Kutta–Fehlberg method. The numerical solutions are used to characterize the irreversibility and irreversibility ratio. It is established that the entropy is enhanced with accelerating estimations of the third-grade material parameter, Brinkman number, magnetism, Biot number, porous parameter, and the impact is decelerated with elevating values of the radiation. The rate of heat transfer is higher for the Brinkman number, and a similar impact on drag force is noticed for magnetic and Grashof numbers. All the parameters on flow, temperature, fluid irreversibility and irreversibility ratio are discussed through graphical illustration.     

Simultaneous effects of radiation,magnetic field on peristaltic flow of Carreau nanofluid submerged in gyrotactic microorganisms with heat and mass transfer

Our study intends to examine the combined effects of radiation, magnetic field, and chemical reaction on the peristaltic flow of a non-Newtonian fluid containing gyrotactic microorganisms and nanoparticles. The system of our equations is understood numerically by using the Rung-Kutta-Merson method with Newton iteration in a shooting and matching procedure. The effect of physical implanted parameters is represented and discussed through a lot of charts for velocity, temperature, nanoparticle concentration, the density of motile microorganisms. From this discussion, we notice that the motile microorganisms profile is affected by the arising with the Brownian motion parameter and radiation parameter but the thermophoresis parameter, traditional Lewis number, and bioconvection of Peclet number are decremented the motile microorganisms profile.     

Numerical investigation of MHD convective free stream nanofluid flow influenced by radiation and chemical reaction over stretching cylinder

Chemically reacting magnetohydrodynamic radiative flow of convective free stream nanofluid through a stretching cylinder using Buongiorno's model is discussed. The behavior of Brownian motion and thermophoresis is also appropriate. By adopting the similarity transformation, the partial differential equation is diminished into a first-order ordinary differential equation (ODE). Since transformed equations are highly nonlinear these ODEs are solved by using mathematical simulation. The shooting procedure has been adopted to resolve converted equations along the attendant Runge–Kutta–Fehlberg technique. The reason behind the present work is to research the effects of different parameters of fluid, namely, magnetic parameter, free stream velocity, Brownian motion, thermophoresis, chemical reaction, heat radiation, Lewis number on nanoparticle concentration, temperature, and velocity distribution. The impact of significantly participating parameters on velocity, concentration, and temperature distribution is distinguished with appropriate physical significance. The convergence of solutions for temperature, velocity, and concentration profiles is studied carefully. The measured challenges of nanofluids are scale-up capacity, increase in nanofluid viscosity, nanoparticle dispersion, and nanofluid cost. It is observed that nanoparticle temperature rises for more value of Brownian motion parameter while it declines for higher Lewis number. The current study in the cylindrical region is related to novel free stream flow in the presence of chemical reactions along with convective conditions which find applications in electronic systems like microprocessors and in a wide variety of industries and in the field of biotechnology. The current research helps control the transport phenomena, helping production companies to find the quality of the desired product.     

Features of the exponential form of internal heat generation,Cattaneo–Christov heat theory on water-based graphene–CNT–titanium ternary hybrid nanofluid flow

To increase energy efficiency, the flow of fluids containing nanoparticles is crucial in industrial applications notably in nuclear reactors and nuclear system cooling. In light of this, this study examines the flow of a water-based ternary hybrid nanofluid (graphene, single-walled carbon nanotubes, and titanium dioxide) across a curved stretching sheet with suction. The non-Fourier heat flux model is also considered in the modeling. The existing partial differential equations are converted into ordinary differential equations through the use of similarity variables. These ordinary differential equations are then numerically solved using the Runge–Kutta–Fehlberg fourth- and fifth-order method along with a shooting approach. The collection of graphical findings for the key variables on the temperature and velocity profiles is investigated. Results reveal that the heat transport in ternary hybrid nanoliquid rises as the heat source/sink parameter rises. The Biot number influences the thermal profile positively, whereas the increasing curvature parameter values reduce heat transport. The curvature parameter has a positive impact on skin friction but the suction parameter has a negative impact on skin friction.     

Entropy analysis of unsteady MHD three-dimensional flow of Williamson nanofluid over a convectively heated stretching sheet

This article addresses an investigation of the entropy analysis of Williamson nanofluid flow in the presence of gyrotactic microorganisms by considering variable viscosity and thermal conductivity over a convectively heated bidirectionally stretchable surface. Heat and mass transfer phenomena have been incorporated by taking into account the thermal radiation, heat source or sink, viscous dissipation, Brownian motion, and thermophoretic effects. The representing equations are nonlinear coupled partial differential equations and these equations are shaped into a set of ordinary differential equations via a suitable similarity transformation. The arising set of ordinary differential equations was then worked out by adopting a well-known scheme, namely the shooting method along with the Runge-Kutta-Felberge integration technique. The effects of flow and heat transfer controlling parameters on the solution variables are depicted and analyzed through the graphical presentation. The survey finds that magnifying viscosity parameter, Weissenberg number representing the non-Newtonian Williamson parameter cause to retard the velocity field in both the directions and thermal conductivity parameter causes to reduce fluid temperature. The study also recognizes that enhancing magnetic parameters and thermal conductivity parameters slow down the heat transfer rate. The entropy production of the system is estimated through the Bejan number. It is noticeable that the Bejan number is eminently dependent on the heat generation parameter, thermal radiation parameter, viscosity parameter, thermal conductivity parameter, and Biot number. The skillful accomplishment of the present heat and mass transfer system is achieved through the exteriorized choice of the pertinent parameters.     

Flow and thermal analysis of Oldroyd 8 constant fluid in a porous channel

The present research is based on the thermal and flow properties of the viscoelastic Oldroyd 8 constant fluid in an upright microchannel. The energy and momentum equations were solved with the support of temperature Jump and velocity slip boundary conditions. To measure the irreversibility rate of the flow system, the acquired results of velocity and thermal equations were used. To crack the current mathematical model problem, the numerical Runge–Kutta–Fehlberg method was used. With the aid of graphs, the effect of physical parameters such as thermal radiation, thermal-dependent heat source, Joule heating, fluid parameters, velocity slip, and temperature Jump parameters on the fluid flow, thermal energy, and system entropy generation was discussed. Fluid parameters have different effects on the velocity profile. The Grashof and Hartmann numbers demonstrate opposite effects on the momentum field. The thermal energy of the system reduces with thermal radiation and temperature Jump factor. The thermal radiation, Hartmann number, and temperature Jump parameters reduce the system's irreversibility rate. With the Brinkman number and temperature Jump parameter, the irreversibility ratio increases.     

MHD Eyring–Powell nanofluid past over an unsteady exponentially stretching surface with entropy generation and thermal radiation

This study's primary objective is to analyze the entropy generation in an unsteady magnetohydrodynamics (MHD) Eyring–Powell nanofluid flow. A surface that stretched out exponentially induced flow. The influences of thermal radiation, thermophoresis, and Brownian motion are also taken into consideration. The mathematical formulation for the transport of mass, momentum, and heat described by a set of partial differential equation is used, which is then interpreted by embracing the homotopy analysis method and with a fourth-order precision program (bvp4c). Graphical results display the consequences of numerous parameters on velocity, temperature, concentration, and entropy generation. Moreover, escalating amounts of the magnetic parameter, thermal radiation parameter, Reynolds number, and Brinkman number improve the entropy profile of the nanofluid. The rate of heat flux and the mass flux conspicuously improves for non-Newtonian fluid as compared to Newtonian fluid.     

Stagnation flow of hybrid nanoparticles with MHD and slip effects

The flow of hybrid nanoparticles with significant physical parameters with different base fluids in the presence of Biot number, velocity slip, and MHD effects has not been explored so far, particularly for a circular cylinder. Therefore, the current report is presented to offer a numerical solution for hybrid nanoparticles with base fluids (water and ethylene glycerol) via a circular cylinder. The physical situation is interpreted in terms of partial differential equations and is converted into ordinary differential equations after applying the similarity transformation. The results are presented in both tabular and graphical forms. The impact of physical parameters on velocity distribution is examined through graphs. The comparative results of hybrid nanoparticles for distinct base fluids as ethylene glycol and water are proposed and the hybrid nanoparticles with base fluid water seems to be greater than that of the hybrid nanoparticles with base fluid EG. The temperature profile of hybrid nanoparticles is found to be a decreasing function with growth in velocity slip parameter but an opposite trend is noted in case of nanoparticles . The skin friction and Nusselt number augmented for the increase in magnetic field, velocity slip, and nanoparticle while it shows a decreasing trend toward thermal slip parameter. For the both cases, improvement in Biot number helps enhance the heat transfer constantly.     

Mutual effects of chemical reaction and thermal radiation on MHD peristaltic transport of Jeffrey nanofluids: Tumor tissues treatment

As thermal radiation is one of the fundamental means of heat transfer, therefore, this study analyzes the impacts of thermal radiation and magnetic field on the peristaltic transport of a Jeffrey nanofluid in a nonuniform asymmetric channel. Further, Two models of viscosity are debated: Model (I), in which all parameters dependent on viscosity behave as a constant (as treated before in nanofluid research); Model (II), in which these known parameters are considered to vary with the temperature of the flow. Under the condition of long wavelength and low Reynolds number, the problem is rearranged. The resulting system of partial differential equations (PNE) is solved with aid of Mathematica 11. Furthermore, the streamline graphs are presented by significance of trapping bolus phenomenon. To emphasize the quality of solutions, comparisons between the previous results and recent published results by Reddy et al. have been made and signified. The comparisons are shown in Table 1 and are found to be in good agreement. As the thermal radiation increases, the diameter of nanoparticles rises (thermal radiation is a diminishing function of temperature, and with a decrease in the temperature, the diameter of the nanoparticles increases, that is, the size of nanoparticles increases and they become more active near malignant tumor tissues). Therefore, its work as agents for radiation remedy, produce limited radiation quantities, and selectively target malignant tumor for controlled mutilation (radiotherapy of oncology). Such a model is appropriate for the transportation of physiological flows in the arteries with heat and mass transfer (blood flow models).     

Thermo-electrokinetic rotating non-Newtonian hybrid nanofluid flow from an accelerating vertical surface

This paper explores the combined effects of Coriolis force and electric force on the rotating boundary layer flow and heat transfer in a viscoplastic hybrid nanofluid from a vertical exponentially accelerated plate. The hybrid nanofluid comprises two different types of metallic nanoparticles, namely silver (Ag) and magnesium oxide (MgO) suspended in an aqueous base fluid. The Casson model is deployed for non-Newtonian effects. An empirical model is implemented to determine the thermal conductivity of the hybrid nanofluid. Rosseland's radiative diffusion flux model is also utilized. An axial electrical field is considered and the Poisson–Boltzmann equation is linearized via the Debye–Hückel approach. The resulting coupled differential equations subject to prescribed boundary conditions are solved with Laplace transforms. Numerical evaluation of solutions is achieved via MATLAB symbolic software. A parametric study of the impact of key parameters on axial velocity, transverse velocity, nanoparticle temperature and Nusselt number is conducted for both the hybrid (Ag–MgO)–water nanofluid and also unitary (Ag)–water nanofluid. With increasing volume fraction of silver nanoparticles, there is a reduction in both axial velocity and temperatures, whereas there is a distinct elevation in transverse velocity for both unitary and hybrid nanofluids. Elevation in the heat absorption parameter strongly decreases axial velocity, whereas it enhances transverse velocity. Increasing the radiation parameter strongly boosts temperatures. Increasing the heat absorption parameter significantly accelerates the transverse flow. Negative values of Helmholtz–Smoluchowski velocity decelerate the axial flow whereas positive values accelerate it; the opposite behavior is observed for transverse velocity. Increasing Taylor number significantly damps both the axial (primary) and transversal (secondary) flow. Increasing thermal Grashof number strongly enhances the axial flow but damps the transverse flow. The unitary nanofluid achieves higher Nusselt numbers than the hybrid nanofluid but these are decreased with greater radiative effect (due to greater heat transport away from the plate surface), Prandtl number and heat absorption. Nusselt number is significantly reduced with greater time progression and values are consistently higher for the unitary nanofluid compared with hybrid nanofluid. The computations provide insight into more complex electrokinetic rheological nanoscale flows of relevance to biomedical rotary electro-osmotic separation devices.     

Heat transfer and fluid flow analysis of non-Newtonian fluid in a microchannel with electromagnetohydrodynamics and thermal radiation

The study of electromagnetohydrodynamics (EMHD) of non-Newtonian fluid plays a significant role for optical design, thermal management of electronic components, and various operations of microfluidic devices. The use of parallel geometry is seen in the circulatory system, extrusion process, and respiratory system. By considering various practical applications, in the current study, the Poiseuille flow of an incompressible Casson liquid between the plates is investigated. The effects of MHD, Joule heating, thermal radiation, modified Darcy's law, and chemical reaction have been taken into account. The dimensional governing equations have been converted into dimensionless equations with pertinent nondimensional quantities. The resulting system of nondimensional system of equations has been analytically solved with nondimensional slip boundary conditions. The graphical results have been displayed with various fluid flow parameters. From the current study, it is concluded that the influence of Darcy number and Casson fluid parameter enhances the velocity profile, but the concentration declines with the enhancement of Casson fluid parameter. The radiation parameter and Prandtl number suppress the temperature profile.     

A two-component modeling for free stream velocity in magnetohydrodynamic nanofluid flow with radiation and chemical reaction over a stretching cylinder

This analysis explores the influence of magnetohydrodynamic (MHD) nanofluid flow over a stretching cylinder with radiation effect in presence of chemically reactive species. The thermal radiation phenomenon is incorporated in the temperature equation. The mathematical modeling of the physical problem produces nonlinear set of partial differential equations corresponding to the momentum and energy equations that can be transformed into simultaneous system of ordinary differential equations with appropriate boundary conditions by applying similarity transformations. Shooting technique is used to solve the molded equations after adoption of Runge–Kutta–Fehlberg approach and ODE45 solver in MATLAB. A parametric analysis has been carried out to investigate the impacts of physical parameters that are considered in the current study. The attractive pattern studied the consequence of Brownian motion along with thermophoresis parameter. The outcomes of prominent fluid parameters, especially heat radiation, Lewis number, free stream velocity, chemical reaction, thermophoresis, and Brownian motion on the concentration, temperature, as well as velocity have been examined and are displayed through graphs and tables. The present study reveals that the temperature phenomenon enhances with an increase in radiation parameter, while nanoparticle concentration phenomenon reduces with an increase in chemical reaction parameter.     

Cattaneo–Christov double-diffusion model with Stefan blowing effect on copper–water nanofluid flow over a stretching surface

We often encounter many processes where the cooling rate is a key factor in deciding the features of a desired product. Due to increasing demands of controlled cooling systems, an effort is made to theoretically study the effect of volume fraction on mixed convective Cu–water nanofluid flow over a stretching surface with activation energy and thermal radiation. The nonlinear dynamical system is simplified using apt similarity variables and the obtained ordinary differential equations are dealt numerically using Runge–Kutta–Fehlberg method and shooting scheme. The thermal and solutal equations are modeled considering Cattaneo–Christov double-diffusion model. The flow problem is studied considering velocity slip and zero mass flux state at the surface. As a novelty, the present case considers the blowing effect at the surface to study massive species transport during nanofluid flow with Cattaneo–Christov double-diffusion model. The results show that an increase in strength of thermal radiation increases temperature and buoyancy ratio parameter, thereby escalating the skin friction coefficient. When thermal relaxation parameter changes from 0.001 to 0.005, heat transfer coefficient improves by 24.36%. Furthermore, with the change in value of the blowing parameter from 0.1 to 0.1015, the maximum value concentration of nanoparticles that is attained during the flow is increased by 7.15%.