共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
3.
4.
5.
海上桩基结构的连接装置,包括:承重盲板、导向口、定位环、加强筋板,其中,该称重盲板的下部与桩基结构连接,称重盲板的上部依次安装有定位环及导向口,该定位环及导向口外部安装上部组块立柱,并与承重盲板连接为一体,该加强筋板安装在导向口的内部。本装置不需要特殊的控制,便可以按一般常规桩基结构的控制精度建造上部组块立柱及桩基结构,不仅降低了海上施工难度及安装失败的风险,而且,还提高了施工效率。 相似文献
6.
7.
由天津益港劳务有限责任公司申请的专利(专利号CN101503089,公开日期2009—08—12)“轮胎充气安全防护装置”,涉及的轮胎充气安全防护装置由底盘、靠板、定位轴套、定位轴、限位挡环、限位链和保护杠端头等构成,即底盘一侧斜向向上固定设有靠板,靠板中心部位设有通孔, 相似文献
8.
9.
10.
11.
大口径环氧玻璃钢管内固化设备的设计分析及设计要点 总被引:1,自引:1,他引:0
本文分析了大口径环氧玻璃钢管的连接方式、固化方式,阐述了大口径环氧玻璃钢管内固化设备的一些设计要点,包括:(1)前期脱模、(2)承口锁扣槽的制作、(3)插口部分“O”型圈槽及锁扣槽的制作、(4)模具承口部分的设计、(5)冷却水的排出,并作了具体的描述。 相似文献
12.
介绍了对置式四喷嘴气化炉锁斗排渣系统工艺流程;分析了气化炉锁斗系统出现锁斗安全阀、排渣阀堵塞以及锁斗充压慢等问题的原因,提出了锁斗系统堵塞的判断方式、预防措施和检修方法。 相似文献
13.
按照国标GB/T18747.1—2002的试验要求并结合轨道车辆的行业规范,对中等强度螺纹锁固厌氧胶在各种条件下进行使用并检测。对检测结果进行对比分析,进一步证实在轨道车辆项目中使用螺纹锁固厌氧胶的必要性,规定螺纹锁固厌氧胶必须使用的部位。 相似文献
14.
A nanocapsule for safe and effective methane storage is investigated by the method of molecular dynamics. The mass content
of methane in the nanocapsule reaches the value of 14.5 mass%. The nanocapsule consists of two parts: a locking chamber and
a storage area. The locking chamber is the nanotube (10.10), open at one end, with a K@C60
1+ endohedral complex inside it. The storage area is a nanotube (20.20). The locking chamber and the storage area are joined
with each other and form T-junction. The locking chamber is opened at the methane filling and the discharge stages, and it
is closed at the storage stage. Thanks to the locking chamber, methane molecules are stored in the nanocapsules under normal
external conditions. Opening and closing of the locking chamber are carried out by the K@C60
1+ endohedral complex displacement, which is done by the electric field action. The specific structure of the nanocapsule allows
two aims to be reached: a high methane mass content and significant level of safety. 相似文献
15.
水锁损害是气藏开采中最常见的损害之一。对于以层内水、层间水和边水为主的疏松砂岩有水气藏,出水水源不同,气井表现出了不同的产水特征和不同的水锁损害程度。目前,大多数学者对气田水锁研究集中在微观模拟实验定性的研究阶段,具体水锁损害对现场开发指标的影响,还缺乏定量化的研究手段。本文以青海xx气田为例,用1数模模拟方法研究了不同产量和生产压差等开采指标情况下,疏松砂岩层内水和边水对气藏的影响程度,定量分析了这两种水源对气田水锁损害的程度,为今后气田配产和合理生产压差制定及防水、治水,提供了定性和定量化的依据。 相似文献
16.
The main aim of this study is to simulate the response of a micro‐PEMFC numerically by utilizing a 3‐D FEM model while the micro‐PEMFC was assembled by three pairs of bolt along the upper and lower portions, respectively, of the end plates. The effects of different bolts locking sequences on the deformation and pressure distributions at flow‐channel plates in a micro‐PEMFC were investigated. The simulated results showed that if one locked the middle bolt either on the upper or lower portion first, then the obtained warpage, uniformities of deformation and von Mises equivalent stress were superior than those results if one locked either one of the four corner bolts first. Also, among the three pairs of bolts used for assembling the cell, the first locking bolt of the first pair of locking bolt and the first locking bolt of the rest of two pairs of locking bolt were to minimize the warpage and stress should locate on the different portions of the end plates. 相似文献
17.
以氧化淀粉改性的聚醋酸乙烯酯乳液为胶黏剂,针对木材多孔性材料,测试乳液木材胶黏剂的黏度、粒径和粘接强度,考察乳液胶黏剂的黏度、粒径、树种及压力对粘接强度的影响程度,计算粘接强度的相对标准偏差(RSD),研究界面物理作用和机械锁固作用与粘接强度的关系,探索乳液木材胶黏剂的胶接性质,结果表明:压力对粘接强度的影响最为敏感,主要遵循压力作用下的机械锁固机理和界面物理作用中的吸附机理;而黏度、粒径和树种对粘接强度的影响相对于压力的影响不显著,即黏度、粒径和树种影响下遵循的界面物理作用中的吸附机理、机械锁固机理相对于压力影响趋于次要地位。 相似文献
18.
为了提高矿井机械安全生产的能力,以被动式人体热释电红外检测器电路BISS0001和单片微型计算机AT89C2051为核心及相关数字电路组成的逻辑控制电路设计制作了矿用红外线检测闭锁装置,用于解决煤矿井下特定危险区域防止人员误入而引发安全事故,起到警告报警和自动闭锁开启的机器设备的作用。 相似文献
19.
20.
直埋蒸汽管是最近几年在蒸汽管道安装使用的一种组合材料,其由蒸汽管、保护钢管、保温层、蒸汽管固定架及防腐层等组合而成,与管廊蒸汽管、架空蒸汽管相比具有不占空间、不占用地、不易受损、不影响环境等优点。本文介绍了直埋蒸汽管的施工程序,从材料进货检验,蒸汽管道焊接、保护管道焊接、蒸汽管蒸汽吹扫及管道回填等施工过程中的要点、施工方法及应该注意事项,严格整个过程控制。 相似文献