Cholesterol derivative-based liposomes for gemcitabine delivery: preparation,in vitro,and in vivo characterization

As an anti-tumor drug, gemcitabine (Gem) is commonly used for the treatment of non-small cell lung cancer and pancreatic cancer. However, there are several clinical drawbacks to using Gem, including its extremely short plasma half-life and side effects. To prolong its half-life and reduce its side effects, we synthesized a derivative of Gem using cholesterol (Chol). This derivative, called gemcitabine-cholesterol (Gem-Chol), was entrapped into liposomes by a thin-film dispersion method. The particle size of the Gem-Chol liposomes was 112.57?±?1.25?nm, the encapsulation efficiency was above 99%, and the drug loading efficiency was about 50%. In vitro studies revealed that the Gem-Chol liposomes showed delayed drug release and long-term stability at 4?°C for up to 2 months. In vivo studies also showed the superiority of the Gem-Chol liposomes, and compared with free Gem, the Gem-Chol liposomes had longer circulation time. Moreover, an anti-tumor study in H₂₂ and S180 tumor models showed that liposomal entrapment of Gem-Chol improved the anti-tumor effect of Gem. This study reports a potential formulation of Gem for clinical application.     

Inhalable liposomes of Glycyrrhiza glabra extract for use in tuberculosis: formulation,in vitro characterization,in vivo lung deposition,and in vivo pharmacodynamic studies

Objective: The current study involves the development of liposomal dry powder for inhalation (LDPI) containing licorice extract (LE) for use in tuberculosis.

Significance: The current epidemiology of tuberculosis along with the increasing emergence of resistant forms of tuberculosis necessitates the need for developing alternative efficacious medicines for treatment. Licorice is a medicinal herb with reported activity against Mycobacterium tuberculosis.

Methods: Liposomes with LE were prepared by thin film hydration technique and freeze dried to obtain LDPI. The comprehensive in vitro and in vivo characterization of the LDPI formulation was carried out.

Results: The particle size of liposomes was around 210?nm with drug entrapment of almost 75%. Transmission electron microscopy revealed spherical shape of liposome vesicles. The flow properties of the LDPI were within acceptable limits. Anderson Cascade Impactor studies showed the mean median aerodynamic diameter, geometric standard deviation and fine particle fraction of the LDPI to be 4.29?µm, 1.23, and 54.68%, respectively. In vivo lung deposition studies of LDPI in mice showed that almost 46% of the drug administered reaches the lungs and 16% of administered drug is retained in the lungs after 24?hours of administration. The in vivo pharmacodynamic evaluation of the LDPI showed significant reduction in bacterial counts in lungs as well as spleen of TB-infected mice.

Conclusions: LE LDPI thus has a promising potential to be explored as an effective anti-tubercular medicine or as an adjunct to existing anti-tubercular drugs.     

New nanomicelle curcumin formulation for ocular delivery: improved stability,solubility, and ocular anti-inflammatory treatment

Context: A stable topical ophthalmic curcumin formulation with high solubility, stability, and efficacy is needed for pharmaceutical use in clinics.

Objectives: The objective of this article was to describe a novel curcumin containing a nanomicelle formulation using a polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol (PVCL–PVA–PEG) graft copolymer.

Methods: Nanomicelle curcumin was formulated and optimized and then further evaluated for in vitro cytotoxicity/in vivo ocular irritation, in vitro cellular uptake/in vivo corneal permeation, and in vitro antioxidant activity/in vivo anti-inflammatory efficacy.

Results: The solubility, chemical stability, and antioxidant activity were greatly improved after the encapsulation of the PVCL–PVA–PEG nanomicelles. The nanomicelle curcumin ophthalmic solution was simple to prepare and the nanomicelles are stable to the storage conditions, and it had good cellular tolerance. Nanomicelle curcumin also had excellent ocular tolerance in rabbits. The use of nanomicelles significantly improved in vitro cellular uptake and in vivo corneal permeation as well as improved anti-inflammatory efficacy when compared with a free curcumin solution.

Conclusions: These findings indicate that nanomicelles could be promising topical delivery systems for the ocular administration of curcumin.     

Proniosomal gel-mediated transdermal delivery of bromocriptine: in vitro and ex vivo evaluation

Vesicular systems endow large opportunities for the transdermal delivery of therapeutics. The present study was designed to investigate the potential of a novel class of vesicular system ‘proniosome’ as a carrier for transdermal delivery of bromocriptine (BCT). Proniosome formulations were prepared by the coacervation-phase separation method and the influence of factors like surfactant type and its amount, lipid concentration, cholesterol amount and drug content were studied. Span 60 was the most appropriate surfactant, and yielded vesicle size and percentage encapsulation efficiency of 1.3 µm and 98.9%, respectively. The developed system was characterised w.r.t. morphology, transition temperature, drug release, skin permeation and skin irritancy. Proniosomes exhibited a sustained release pattern of BCT in vitro. Skin permeation study revealed high penetration of proniosomes with sustained release of BCT through rat skin. The optimised proniosomal formulation showed enhanced transdermal flux of 16.15 μg/cm²/h as compared to 3.67 μg/cm²/h for drug dispersion. The developed formulations were observed as non-irritant to the rat skin and were found as quite stable at 4 and 25 °C for 90 days w.r.t. vesicle size and drug content. The dried proniosomal formulation could act as a promising alternative to niosomes and preferably for transdermal delivery of BCT.     

Fabrication of solid lipid nanoparticles of lurasidone HCl for oral delivery: optimization,in vitro characterization,cell line studies and in vivo efficacy in schizophrenia

Objective: The aim of the present investigation was to investigate the efficacy of solid lipid nanoparticles (SLNs) to enhance the absorption and bioavailability of lurasidone hydrochloride (LH) following oral administration.

Methods: The LH loaded SLNs (LH-SLNs) were prepared by high pressure homogenization (HPH) method, optimized using box Behnken design and evaluated for particle size (PS), entrapment efficiency (EE), morphology, FTIR, DSC, XRD, in vitro release, ex vivo permeation, transport studies across Caco-2 cell line and in vivo pharmacokinetic and pharmacodynamic studies.

Results: The LH-SLNs had PS of 139.8?±?5.5?nm, EE of 79.10?±?2.50% and zeta potential of ?30.8?±?3.5?mV. TEM images showed that LH-SLNs had a uniform size distribution and spherical shape. The in vitro release from LH-SLNs followed the Higuchi model. The ex vivo permeability study demonstrated enhanced drug permeation from LH-SLNs (>90%) through rat intestine as compared to LH-suspension. The SLNs were found to be taken up by energy dependent, endocytic mechanism which was mediated by clathrin/caveolae-mediated endocytosis across Caco-2 cell line. The pharmacokinetic results showed that oral bioavailability of LH was improved over 5.16-fold after incorporation into SLNs as compared to LH-suspension. The pharmacodynamic study proved the antipsychotic potential of LH-SLNs in the treatment of schizophrenia.

Conclusion: It was concluded that oral administration of LH-SLNs in rats improved the bioavailability of LH via lymphatic uptake along with improved therapeutic effect in MK-801 induced schizophrenia model in rats.     

Improved initial burst of estradiol organogel as long-term in situ drug delivery implant: formulation,in vitro and in vivo characterization

Objective: The present investigation was aimed at optimizing of estradiol (E2) loaded l-amino acid derivatives organogel formulations resulting in improved the high initial release problems and sustained release of E2.

Methods: The visco-elastic properties of blank organogels were measured by rheometer. The E2 organogel formulations were optimized using a central composite design. Also, the effect of gelator structure and composition of the gel formulations on release behavior (in vitro and in vivo) had been studied.

Results: The change of the gelator structure could affect significantly the stiffness of the implants. The release behavior of gel without N-Methyl-2-pyrrolidinone (NMP) was controlled by gel corrosion only. While the drug release of the gel with NMP was controlled by both corrosion and diffusion. The high initial release problems of the organogels were improved by optimizing the formulations. The system consisting by N-Lauroyl l-lysine methyl ester (LLM) derivative in the oil indicated the lowest initial drug release, showed a much lower blood drug level and maintained a steady state for nearly 1 month.

Conclusion: Organogels based on l-lysine methyl ester derivative were ideal carriers for long-term parenteral administration of E2.     

Ciprofloxacin Liposomes as Vesicular Reservoirs for Ocular Delivery: Formulation,Optimization, and In Vitro Characterization

Management of extraocular diseases is mainly limited by the inability to provide long-term drug delivery without avoiding the systemic drug exposure and/or affecting the intraocular structures and poor availability of drugs, which may be overcome by prolonging the contact time with the ocular system, for instance with liposomes. Development and optimization of reverse phase evaporation ciprofloxacin (CPF) HCl liposomes for ocular drug delivery was carried out using a 2⁵ full factorial design based on five independent variables. The effects of the studied parameters on drug entrapment efficiency (EE), particle size, and percentage of drug released after 1 and 10 h were investigated. The results obtained pointed out that the molar concentration of cholesterol was the predominant factor that increased the EE% of the drug and the particle size responses. The percentage of drug released after 1 h was significantly controlled by the initial CPF concentration while that after 10 h was controlled by molar cholesterol concentration. The designed liposomes had average particle sizes that ranged from 2.5 to 7.23 μm. In addition, liposomes revealed a fast release during the first hour followed by a more gradual drug release during the 24-h period according to Higuchi diffusion model.     

Damar Batu as a novel matrix former for the transdermal drug delivery: in vitro evaluation

Purpose: Damar Batu (DB) is a novel film-forming biomaterial obtained from Shorea species, evaluated in this study for its potential application in transdermal drug delivery system. Methods: DB was characterized initially in terms of acid value, softening point, molecular weight (M_w), polydispersity index (M_w/M_n), and glass transition temperature (T_g). Neat, plasticized films of DB were investigated for mechanical properties. The biomaterial was further investigated as a matrix-forming agent for transdermal drug delivery system. Developed matrix-type transdermal patches were evaluated for thickness and weight uniformity, folding endurance, drug content, in vitro drug release study, and skin permeation study. Results: On the basis of in vitro drug release and in vitro skin permeation performance, formulation containing DB/Eudragit RL100 (60 : 40) was found to be better than other formulations and was selected as the optimized formulation. IR analysis of physical mixture of drug and polymer and thin layer chromatography study exhibited compatibility between drug and polymer. Conclusion: From the outcome of this study, it can be concluded that applying suitable adhesive layer and backing membrane-developed DB/ERL100, transdermal patches can be of potential therapeutic use.     

Development of acetazolamide-loaded,pH-triggered polymeric nanoparticulate in situ gel for sustained ocular delivery: in vitro. ex vivo evaluation and pharmacodynamic study

The objective of research was to develop a novel pH-triggered polymeric nanoparticulate in situ gel (NP-ISG) for ophthalmic delivery of acetazolamide (ACZ) to enhance the conjunctival permeation and precorneal residence time of the formulation by overcoming the limitations of protective ocular barriers. Nanoparticles (NP1--NP12) were developed by nanoprecipitation method and evaluated for pharmacotechnical characteristics including transmission electron microscopy. The optimized formulation, NP10 was dispersed in carbopol 934?P to form nanoparticulate in situ gels (NP-ISG1--NP-ISG5). NP-ISG5 was selected as optimized formulation on the basis of gelation ability and residence time. Ex vivo transcorneal permeation study exhibited significantly higher ACZ permeation from NP-ISG5 (74.50?±?2.20?mg/cm²) and NP10 (93.5?±?2.25?mg/cm²) than eye drops (20.08?±?3.12?mg/cm²) and ACZ suspension (16.03?±?2.14). Modified Draize test with zero score indicated nonirritant property of NP-ISG5. Corneal toxicity study revealed no visual signs of tissue damage. Further, NP-ISG5 when tested for hypotensive effect on intraocular pressure (IOP) in rabbits revealed that NP-ISG5 caused significant decrease in IOP (p?in vitro efficacy, safety and patient compliance.     

Lyophilized insulin nanoparticles prepared from quaternized N-aryl derivatives of chitosan as a new strategy for oral delivery of insulin: in vitro,ex vivo and in vivo characterizations

Objective: The purpose of this research was the development, in vitro, ex vivo and in vivo characterization of lyophilized insulin nanoparticles prepared from quaternized N-aryl derivatives of chitosan.

Methods: Insulin nanoparticles were prepared from methylated N-(4-N,N-dimethylaminobenzyl), methylated N-(4 pyridinyl) and methylated N-(benzyl). Insulin nanoparticles containing non-modified chitosan and also trimethyl chiotsan (TMC) were also prepared as control. The effects of the freeze-drying process on physico-chemical properties of nanoparticles were investigated. The release of insulin from the nanoparticles was studied in vitro. The mechanism of the release of insulin from different types of nanoparticles was determined using curve fitting. The secondary structure of the insulin released from the nanoparticles was analyzed using circular dichroism and the cell cytotoxicity of nanoparticles on a Caco-2 cell line was determined. Ex vivo studies were performed on excised rat jejunum using Frantz diffusion cells. In vivo studies were performed on diabetic male Wistar rats and blood glucose level and insulin serum concentration were determined.

Results: Optimized nanoparticles with proper physico-chemical properties were obtained. The lyophilization process was found to cause a decrease in zeta potential and an increase in PdI as well as and a decrease in entrapment efficiency (EE%) and loading efficiency (LE%) but conservation in size of nanoparticles. Atomic force microscopy (AFM) images showed non-aggregated, stable and spherical to sub-spherical nanoparticles. The in vitro release study revealed higher release rates for lyophilized compared to non-lyophilized nanoparticles. Cytotoxicity studies on Caco-2 cells revealed no significant cytotoxicity for prepared nanoparticles after 3-h post-incubation but did show the concentration-dependent cytotoxicity after 24?h. The percentage of cumulative insulin determined from ex vivo studies was significantly higher in nanoparticles prepared from quaternized aromatic derivatives of chitosan. In vivo data showed significantly higher insulin intestinal absorption in nanoparticles prepared from methylated N-(4-N, N-dimethylaminobenzyl) chitosan nanoparticles compared to trimethyl chitosan.

Conclusion: These data obtained demonstrated that as the result of optimized physico-chemical properties, drug release rate, cytotoxicity profile, ex vivo permeation enhancement and increased in vivo absorption, nanoparticles prepared from N-aryl derivatives of chitosan can be considered as valuable method for the oral delivery of insulin.     

Preparation and evaluation of in situ gelling ophthalmic drug delivery system for methazolamide

Purpose: In this study, a thermosensitive in situ gelling vehicle was prepared to increase the precorneal resident time and the bioavailability of methazolamide (MTA). Method: Poloxamer analogs were used as the gelling agents, and the in situ gel was obtained by using a cold method. The gelation temperature, rheological properties, in vitro release as well as in vivo evaluation (the elimination of MTA in aqueous humor and intraocular-lowering effect) of the optimized formulations were investigated. Results: The optimum concentrations of poloxamer analogs for the in situ gel-forming delivery system were 21% (w/w) poloxamer 407 and 10% (w/w) poloxamer P188. This formulation was able to flow freely under nonphysiological conditions and underwent sol–gel transition in the cul-de-sac upon placement into the eye. In vitro release studies demonstrated a diffusion-controlled release of MTA from the poloxamer solutions over a period of 10 hours. In vivo evaluation indicated that the poloxamer solutions had a better ability to retain drug than MTA eyedrops did. Conclusion: These results suggested that in situ gelling ophthalmic drug delivery system may hold some promise in ocular MTA delivery.     

Topical delivery of tetrahydrocurcumin lipid nanoparticles effectively inhibits skin inflammation: in vitro and in vivo study

Tetrahydrocurcumin (THC) also referred to as ‘white curcumin’, is a stable colorless hydrogenated product of curcumin with superior antioxidant and anti-inflammatory properties. The present study is an attempt to elevate the topical bioavailability of THC, post-incorporation into a nano-carrier system with its final dosage as a hydrogel. Lipid nanoparticles of THC (THC-SLNs) prepared by microemulsification technique were ellipsoidal in shape (revealed in transmission electron microscopy) with a mean particle size of 96.6?nm and zeta potential of ?22?mV. Total drug content and entrapment efficiency of THC-SLNs was 94.51%?±?2.15% and 69.56%?±?1.35%, respectively. Differential scanning calorimetry and X-ray diffraction studies confirmed the formation of THC-SLNs. In vitro drug release studies showed the drug release from THC-SLNs gel to follow Higuchi’s equation revealing a Fickian diffusion. Ex vivo permeation studies indicated a 17 times (approximately) higher skin permeation of THC-SLNs gel as compared with the free THC gel. Skin irritation, occlusion, and stability studies indicated the formulation to be nonirritating, and stable with a desired occlusivity. Pharmacodynamic evaluation in an excision wound mice model clearly revealed the enhanced anti-inflammatory activity of THC-SLNs gel and was further confirmed using biochemical and histopathological studies. It is noteworthy to report here that THC-SLNs gel showed significantly better (p?≤?0.001) activity than free THC in gel. As inflammation is innate to all the skin disorders, the developed product opens up new therapeutic avenues for several skin diseases. To the best of our knowledge, this is the first paper elaborating the therapeutic usefulness of white curcumin-loaded lipidic nanoparticles for skin inflammation.     

Chitosan based mucoadhesive nanoparticles of ketoconazole for bioavailability enhancement: formulation,optimization, in vitro and ex vivo evaluation

Purpose: The conventional dosage form of Ketoconazole (KZ) shows poor absorption due to rapid gastric emptying. Chitosan based mucoadhesive nanoparticles (NPs) of KZ were developed to efficiently release drug at its absorption window i.e. stomach and the site of action i.e. esophagus.

Method: The NPs were prepared by ionic gelation method. Concentration of polymer, cross-linking agent and ratio of drug/polymer as well as polymer/cross linking agent were optimized.

Results: NPs had 69.16?±?5.91% mucin binding efficiency, particle size of 382.6?±?2.384?nm, ζ potential of +48.1?mv and entrapment efficiency of 59.84 ± 1.088%. DSC thermogram indicated absence of any drug polymer interaction. The drug release was by controlled, non-fickian diffusion mechanism. Ex vivo diffusion studies were performed by emptying the stomach contents after 2?h to simulate in vivo gastric emptying. The results showed that drug diffusion from the solution across stomach mucosa stopped after emptying whereas that from the NPs continued upto 5?h. Hence we could conclude that the NPs must have adhered to the stomach mucosa and thereby would have been retained at this absorption site even after gastric emptying.

Conclusion: The orally delivered KZ loaded mucoadhesive NPs can be used as an efficient carrier for delivering drug at its absorption window i.e. the stomach and the site of action i.e. esophagus even after gastric emptying.     

Nanoparticles as tool for enhanced ophthalmic delivery of vancomycin: a multidistrict-based microbiological study,solid lipid nanoparticles formulation and evaluation

Context: A microbiological multidistrict-based survey from different Egyptian governorates was conducted to determine the most prevalent causative agents of ocular infections in the Egyptian population. Antibiotic sensitivity testing was then performed to identify the most potent antimicrobial agent. Vancomycin (VCM) proved the highest activity against gram-positive Staphylococcus bacteria, which are the most commonly isolated causative agents of ocular infection. However, topically applied VCM suffers from poor ocular bioavailability because of its high molecular weight and hydrophilicity. Objective: The aim of the present study was to develop VCM-loaded solid lipid nanoparticles (SLNs) using water-in-oil-in-water (W/O/W) double emulsion, solvent evaporation technique to enhance ocular penetration and prolong ophthalmic residence of VCM. Method: Two consecutive full factorial designs (2⁴ followed by 3²) were adopted to study the effect of different formulation and process parameters on SLN formulation. The lipid type and structure, polyvinyl alcohol (PVA) molecular weight and concentration, sonication time, as well as lipid:drug ratio were studied as independent variables. The formulated SLN formulae were evaluated for encapsulation efficiency (EE%), particle size (PS), and zeta potential as dependent variables. Results: The statistically-optimized SLN formula (1:1 ratio of glyceryltripalmitate:VCM with 1% low molecular weight PVA and 1?min sonication time) had average PS of 277.25?nm, zeta potential of ?20.45, and 19.99% drug encapsulation. Scanning and transmission electron micrographs showed well-defined, spherical, homogenously distributed particles. Conclusion: The present study suggests that VCM incorporation into SLNs is successfully achievable; however, further studies with different nanoencapsulation materials and techniques would be valuable for improving VCM encapsulation.     

Formulation and optimisation of famotidine proniosomes: an in vitro and ex vivo study

The aim of the study was to develop a proniosomal system for famotidine (FAM), a potent H₂ receptor antagonist that could efficiently deliver entrapped drug over a prolonged period of time. The proniosomal system was formulated by selecting various ratios of Span 60 and cholesterol using a coacervation-phase separation method. The formulated systems were characterised for drug excipient compatibility studies by Fourier transform infrared spectroscopy (FTIR), vesicle size determination by the particle size analyser, % drug encapsulation, drug-release profiles, field emission scanning electron microscopy (FESEM) for surface morphology, X-ray diffraction (XRD) and vesicular stability at different storage conditions. By using this method, the % drug loading that resulted by the encapsulation of proniosome was found to be 78%–89%. Increase in cholesterol and surfactant concentration increases encapsulation efficiency, but further increment decreases encapsulation. In vitro drug-release studies showed prolonged release of entrapped famotidine. The highest % cumulative drug release was achieved in formulation FAM2 (96%) in 24 hours. The ex vivo data on the release of famotidine from proniosomal formulations have shown significantly increased per cent release and flux in comparison to the same dose of marketed preparation of famotidine. Stability studies were carried out in refrigerated conditions, and higher drug retention was observed. It is evident from this study that proniosomes are a promising prolonged delivery system for famotidine and have reasonably good stability characteristics.     

Preparation and evaluation of charged solid lipid nanoparticles of tetrandrine for ocular drug delivery system: pharmacokinetics,cytotoxicity and cellular uptake studies

In this study, tetrandrine-loaded cationic solid lipid nanoparticles (TET-CNP) and solid lipid nanoparticles (TET-NP) were prepared by the emulsion evaporation-solidification at low temperature method. The particle size, zeta potential, and entrapment efficiency of TET-CNP and TET-NP were characterized. The results showed that the TET-CNP and TET-NP had average diameters of (15.29?±?1.34) nm and (18.77?±?1.23) nm with zeta potentials of (5.11?±?1.03) mV and (?8.71?±??1.23) mV and entrapment efficiencies of (94.1?±?2.37)% and (95.6?±?2.43)%, respectively. In vitro release studies indicated that the TET-CNP and TET-NP retained the drug entity better than tetrandrine ophthalmic solutions (TET-SOL). In the pharmacokinetics studies, the AUC values of TET-CNP and TET-NP were 1.96-fold and 2.00-fold higher than that of TET-SOL (?p?C_max values of TET-CNP and TET-NP were 2.45-fold and 2.53-fold higher than that of the TET-SOL (p?相似文献   

Topical delivery of fluconazole: in vitro skin penetration and permeation using emulsions as dosage forms

We investigated in vitro skin penetration and permeation of fluconazole from emulsions containing different penetration enhancers. Fluconazole permeation was high (15-65% of the applied dose) across hairless mouse skin and low (8-9%) across pig ear skin. Permeation across mice skin from a formulation containing propyleneglycol and isopropyl myristate was significantly higher than that observed with the paraffin oil and propyleneglycol or Transcutol® emulsions. With pig skin, the paraffin oil or isopropyl myristate and propyleneglycol emulsions showed similar skin permeation and penetration. However, these emulsions provided epidermal concentrations higher than the minimal inhibitory concentrations for most dermatophytes.     

Thermal sintering: a novel technique used in the design,optimization and biopharmaceutical evaluation of propranolol HCl gastric floating tablets

The objective of the present investigation was to study the applicability of thermal sintering technique for the development of gastric floating tablets of propranolol HCl. Formulations were prepared using four independent variables, namely (i) polymer quantity, (ii) sodium bicarbonate concentration, (iii) sintering temperature and (iv) sintering time. Floating lag time and t₉₅ were taken as dependent variables. Tablets were prepared by the direct compression method and were evaluated for physicochemical properties, in vitro buoyancy and dissolution studies. From the drug release studies, it was observed that drug retarding property mainly depends upon the sintering temperature and time of exposure. The statistically optimized formulation (PTSso) was characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry studies, and no significant chemical interaction between drug and polymer was observed. Optimized formulation was stable at accelerated conditions for a period of six months. PTSso was evaluated for in vivo buoyancy studies in humans for both fed and fasted states and found that gastric residence time of the floating tablets were enhanced by fed stage but not in fasted state. Optimized formulation PTSso and commercial formulation Ciplar LA 80 were subjected to bioavailability studies in healthy human volunteers by estimating pharmacokinetic parameters such as C_max, T_max, area under curve (AUC), elimination rate constant (K_el), biological half-life (t_1/2) and mean residence time (MRT). There was a significant increase in the bioavailability of the propranolol HCl from PTSso formulation, which was evident from increased AUC levels and larger MRT values than Ciplar LA 80.     

Cellulose acetate microspheres as floating depot systems to increase gastric retention of antidiabetic drug: formulation, characterization and in vitro-in vivo evaluation

Gastric emptying is a complex process that is highly variable and makes the in vivo performance of drug delivery systems uncertain. In order to avoid this variability, efforts have been made to increase the retention time of the drug delivery systems for more than 12 hours utilizing floating or hydrodynamically controlled drug delivery systems. The objective of this investigation was to develop a floating, depot-forming drug delivery system for an antidiabetic drug based on microparticulate technology to maintain constant plasma drug concentrations over a prolonged period of time for effective control of blood sugar levels. Formulations were optimized using cellulose acetate as the polymer and evaluated in vitro for physicochemical characteristics and drug release in phosphate buffered saline (pH 7.4), and evaluated in vivo in healthy male albino mice. The shape and the surface morphology of the prepared microspheres were characterized by optical microscopy and scanning electron microscopy. In vitro drug release studies were performed and drug release kinetics were calculated using the linear regression method. Effects of stirring rate during preparation and polymer concentration on the size of microspheres and drug release were observed. The prepared microspheres exhibited prolonged drug release (more than 10 hours) and remained buoyant for over 10 hours. Spherical and smooth-surfaced microspheres with encapsulation efficiency ranging from 73% to 98% were obtained. The release rate decreased and the mean particle size increased at higher polymer concentrations. Stirring speed affected the morphology of the microspheres. This investigation revealed that upon administration, the biocompatible depot-forming polymeric microspheres controlled the drug release and plasma sugar levels more efficiently than plain orally given drug. These formulations, with their reduced frequency of administration and better control over drug disposition, may provide an economic benefit to the user compared with products currently available for diabetes control.     

Artesunate-loaded chitosan/lecithin nanoparticles: Preparation,characterization, and in vivo studies

Artesunate (AST), the most widely used artemisnin derivative, has poor aqueous solubility and suffers from low oral bioavailability (~40%). Under these conditions, nanoparticles with controlled and sustained released properties can be a suitable solution for improving its biopharmaceuticals properties. This work reports the preparation and characterization of auto-assembled chitosan/lecithin nanoparticles loaded with AST and AST complexed with β-cyclodextrin (β-CD) to boost its antimalarial activity. The nanoparticles prepared by direct injection of lecithin alcoholic solution into chitosan/water solution have shown the particle size distribution below 300?nm. Drug entrapment efficiency was found to be maximum (90%) for nanoparticles containing 100?mg of AST. Transmission electron microscopy images show spherical shape with contrasted corona (chitosan) surrounded by a lipidic core (lecithin + isopropyl myristate). Differential scanning calorimeter thermograms demonstrated the presence of drug in drug-loaded nanoparticles along with the disappearance of decomposition exotherm suggesting the increased physical stability of drug in prepared formulations. Negligible changes in the characteristic peaks of drug in Fourier-transform infrared spectra indicated the absence of any interaction among the various components entrapped in the nanoparticle formulation. In vitro drug release behavior was found to be influenced by pH value. Increased in vivo antimalarial activity in terms of less mean percent parasitemia was observed in infected Plasmodium berghei mice after the oral administration of all the prepared nanoparticle formulations.