Development and uniform evaluation of ropinirole osmotic pump tablets with REQUIP XL both in vitro and in beagle dogs

REQUIP XL, prolonged release formulation of ropinirole hydrochloride (RH) in market, could release ropinirole constantly and showed satisfactory therapeutic effect and good compliance. REQUIP XL was composed of more than 10 kinds of excipients and prepared by Geomatrix technology, which was complex and laborious. The purpose of this study was to obtain a dosage form of RH with similar in vitro release profile and bioequivalence in vivo compared to REQUIP XL. Osmotic pump tablet combined with fast release phase was selected as the delivery system of RH and similar release curves were obtained in different media. The tablets were also administered to beagle dogs and the pharmacokinetic parameters were calculated using a non-compartmental model. C_max, t_max, mean residence time (MRT), and area under the curve from 0 to 24?h (AUC_0–24) were 3.97?±?0.53?ng/mL, 3.58?±?0.49?h, 8.29?±?0.93?h, and 35.20?±?8.11?ng/mL???h for ropinirole osmotic pump tablets (ROPT) and 4.15?±?1.07?ng/mL, 2.92?±?0.49?h, 7.84?±?1.09?h, and 34.34?±?10.06?ng/mL???h for REQUIP XL. The log-transformed mean C_max and AUC_0–24 of ROPT were about 92.15% and 102.49% relative to that of REQUIP XL, respectively. The 90% confidence intervals of C_max and AUC_0–24 for ROPT were 75.69–115.31% and 88.89–122.30%, respectively. So it could be concluded that ROPT was uniform with REQUIP XL both in vitro and in beagles and the release profiles of Geomatrix technology may be obtained by osmotic pump combined with fast release technology.     

Preparation of fenofibrate immediate-release tablets involving wet grinding for improved bioavailability

Objective: The purpose of this study was to investigate the dissolution and oral bioavailability of an immediate-release tablet involving wet grinding of a poorly water-soluble drug, fenofibrate. Methods: The milled suspension was prepared using a Basket Dispersing Mill in the presence of a hydrophilic polymer solution and then granulated with common excipients, and compressed into an immediate-release tablet with blank microcrystalline cellulose granules. Results: Compared with unmilled tablets (56% within 30 minutes), the dissolution of wet-milled tablets (about 98% in 30 minutes) was markedly enhanced. No significant decrease in the dissolution rate (96% in 30 minutes) of the wet-milled tablet was observed after 3 months under 40°C and 75% relative humidity storage. In addition, the oral bioavailability of the wet-milled tablets (test) and Lipanthyl® supra-bioavailability tablets (reference) was determined in beagle dogs after a single dose (160 mg fenofibrate) in a randomized crossover, own-control study. The results suggested that both the area under the plasma concentration–time curve (AUC_(0?t) = 46.83 ± 11.09 μg/mL h) and the mean peak concentration of the test (C_max = 4.63 ± 1.71 μg/mL) were higher than the reference (AUC_(0?t) = 35.12 ± 10.97 μg/mL h, C_max = 2.11 ± 0.08 μg/mL). The relative bioavailability of the wet-milled tablet was approximately 1.3-fold higher. Furthermore, the apparent rate of absorption of fenofibrate from the wet-milled tablet (T_max = 2.63 hours) was faster than that from Lipanthyl® (T_max = 3.75 hours). Conclusion: These results indicated that the dissolution and the bioavailability of fenofibrate were significantly enhanced by wet-grinding process. So, this shows that wet grinding is a powerful technique to improve the bioavailability for poorly water-soluble drugs, especially for Biopharmaceutics Classification System Class II compounds.     

Preparation and pharmacokinetics study on gastro-floating sustained-release tablets of troxipide

The purpose of this research aimed at preparing gastro-floating sustained-release tablets of troxipide and a further study on in vitro release and in vivo bioavailability. Under the circumstances of direct powder compression, the floating tablets were successfully prepared with HPMC as main matrix material, Carbopol as assistant matrix material, octadecanol as floating agent and sodium bicarbonate as foaming agent to float by gas-forming. The floating time and accumulative release amount as evaluation indexes were utilized to perform pre-experiment screening and single-factor test, respectively, while central composite design response surface method was applied for formulation optimization, followed by in vivo pharmacokinetic study in beagles after oral administration for floating tablets and commercial tablets used as the control. The results indicated that the floating sustained-release tablets held a better capability for floating and drug release and more satisfactory pharmacokinetic parameters, such as a lower C_max, a prolonged T_max, but an equivalent bioavailability calculated by AUC_0–24 compared to commercial tablets. So a conclusion was finally drawn that the floating sustained-release tablets possessing a good release property could be suitable for demands of design.     

An in vitro and in vivo investigation into the suitability of compression coated tablets of indomethacin for the treatment of rheumatoid arthritis which follow circadian rhythms

Objective: The aim of this study was to develop chronotherapeutic drug delivery system of indomethacin using polyethylene oxide (PEO) with a predetermined lag time of 6 h by compression coating technique.

Materials and methods: Solid dispersions (SD) of indomethacin were prepared using novel carrier sucrose fatty acid ester (SFE 1815) to increase the in vitro dissolution. The optimized SD was formulated as immediate release core tablet which were further coated with PEO (WSR Coagulant or WSR N12 K) using compression coating technique. Compression coated tablets formulated with PEO WSR Coagulant in 1:1.7 ratio of core tablet weight and coating polymer was considered as optimized formulation, which was further characterized by differential scanning calorimetry, X-ray diffractometry, Fourier transformed infrared spectroscopy, and scanning electron microscopy.

Results: The results indicated that there was no chemical incompatibility and slight change in surface properties. C_max, area under the curve (AUC_0-t), and T_max following oral ingestion of commercial capsule (Indocap) and optimized formulation (CT 4) were found to be 1973.18 ± 36.89 ng/mL, 11090.09 ± 131.21 ng/mL/h, 0.99 ± 0.02 h and 2115.46 ±6 2.61, 10413.14 ± 299.66 ng/mL/h, 7.00±0.02 h, respectively.

Conclusion: Unaltered AUC_0-t and C_max, but delayed T_max indicated clear lag time before immediate release of drug which is suitable for treating rheumatoid arthritis following circadian rhythm.     

Development and pharmacokinetic evaluation of alginate-pectin polymeric rafts forming tablets using box behnken design

Abstract

Raft is an emerging drug delivery system, which is suitable for controlled release drug delivery and targeting. The present study aimed to evaluate the physico-chemical properties of raft, in vitro release of pantoprazole sodium sesquihydrate and conduct bioavailability studies. Box behnken design was used with three independent and dependent variables. Independent variables were sodium alginate (X₁), pectin (X₂) and hydroxypropyl methyl cellulose K100M (X₃) while dependent variables were percentage drug release at 2 (Y₂), 4 (Y₄) and 8?h (Y₈). The developed rafts were evaluated by their physical and chemical properties. Fourier transform infrared spectroscopy and differential scanning calorimetry were used to study the chemical interaction and thermal behaviour of drug with polymers. Alginate and pectin contents of R9 formulation were 99.28% and 97.29%, respectively, and acid neutralization capacity was 8.0. R9 formulation showed longer duration of neutralization and nature of raft was absorbent. The raft of R9 formulation showed 98.94% release of PSS at 8?h in simulated gastric fluid. Fourier transform infrared spectroscopy showed no chemical interaction and differential scanning calorimetry indicated endothermic peaks at 250?°C for pantoprazole sodium sesquihydrate. t_max for the test and reference formulations were 8?±?2.345?h and 8?±?2.305?h, respectively. C_max of test and reference formulations were 46.026?±?0.567?µg/mL and 43.026?±?0.567?µg/mL, respectively. AUC_(0-t) of the test and reference formulations were 472.115?±?3.467?µg?×?h/mL and 456.105?±?2.017?µg?×?h/mL, respectively. Raft forming system successfully delivered the drug in controlled manner and improved the bioavailability of drugs.     

Biopolymeric mucoadhesive bilayer patch of pravastatin sodium for Buccal delivery and treatment of patients with atherosclerosis

Mucoadhesive bilayer buccal patch has been developed to improve the bioavailability and therapeutic efficacy along with providing sustained release of pravastatin sodium. Buccal patches comprising of varying composition of Carbopol 934P and HPMC K4M were designed and characterized for surface pH, swelling index, in vitro bioadhesion, mechanical properties, in vitro drug release and in vivo pharmacokinetic and pharmacodynamics performance. All formulations exhibited satisfactory technological parameters and followed non-fickian drug release mechanism. Bilayer buccal patch containing Carbopol 934P and HPMC K4M in 4:6 ratio (PBP5) was considered optimum in terms of swelling, mucoadhesion, mechanical properties and in vitro release profile. Pharmacokinetic studies in rabbits showed significantly higher (p < 0.05) Cmax (75.63 ± 6.98 ng/mL), AUC_0-8 (311.10 ± 5.89 ng/mL/h) and AUC_0-∞ (909.42 ± 5.89 ng/mL/h) than pravastatin oral tablet (Cmax – 67.40 ± 9.23 ng/mL, AUC_0-8-130.33 ± 10.25 ng/mL/h and AUC_0-∞-417.17 ± 5.89 ng/mL/h)). While, increased tmax of buccal patch indicated its sustained release property in comparison to oral tablet. Pharmacodynamic studies in rabbits showed statistically significant difference (p < 0.005) in the reduction of TG (131.10 ± 10.23 mg/dL), VLDL (26.00 ± 2.56 mg/dL) and LDL level (8.99 ± 3.01 mg/dL) as compared to oral conventional tablet. In conclusion, bioavailability from the developed buccal patch of pravastatin was 2.38 times higher than the oral dosage form, indicating its therapeutic potential in the treatment of atherosclerosis.     

Three-ways crossover bioequivalence study of cephalexin in healthy Malay volunteers

Context: Although the general pharmacokinetics of cephalexin is quite established up-to-date, however, no population-based study on Cephalexin pharmacokinetics profile in Malay population has been reported yet in the literature.

Objective: The objective of this study was to investigate the pharmacokinetics and to compare the bioavailability of three cephalexin products, Ospexin® versus MPI Cephalexin® tablet and MPI Cephalexin® capsule, in healthy Malay ethnic male volunteers in Malaysia.

Material and method: A single dose, randomized, fasting, three-period, three-treatment, three-sequence crossover, open label bioequivalence study was conducted in 24 healthy Malay adult male volunteers, with 1 week washout period. The drug concentration in the sample was analyzed using high performance liquid chromatography.

Result: The mean (SD) pharmacokinetic parameter results of Ospexin® were C_max, 17.39 (4.15) μg/mL; AUC_0–6, 28.90 (5.70) µg/mL?*?h; AUC_0–∞, 30.07 (5.94) µg/mL?*?h; while, those of MPI Cephalexin® tablet were C_max, 18.29 (3.01) μg/mL; AUC_0–6, 30.02 (4.80) µg/mL?*?h; AUC0_0–∞, 31.33 (5.18) µg/mL?*?h and MPI Cephalexin® capsule were C_max, 18.25 (3.92) μg/mL; AUC_0–6, 30.04 (5.13) µg/mL?*?h; AUC_0–∞, 31.22 (5.29) µg/mL?*?h.

Conclusion: The 90% confidence intervals for the logarithmic transformed C_max, AUC_0–6 and AUC_0–∞, of Ospexin® versus MPI Cephalexin® tablet and Ospexin® versus MPI Cephalexin® capsule were between 0.80 and 1.25. Both C_max and AUC met the predetermined criteria for assuming bioequivalence. The pharmacokinetic profile of cephalexin in Malay population does not vary much from other world population.     

Application of Flow-Through Dissolution Method for the Evaluation of Oral Formulations of Nifedipine

Abstract

The drug release characteristics of three oral formulations (one conventional and 2 extended-release) of nifedipine were evaluated using a flow-through apparatus. The experiments were conducted for 4 to 24 hours using water or phosphate buffer (0.05 or 0.1 M; pH 7.4) with or without solubilizing agent, Tween, as a dissolution medium at a flow rate of 12.5 mL/min. The drug concentrations were determined using an HPLC method based on ratios of peak heights corresponding to UV absorbances at 254 nm for nifedipine and nitrendipine (internal standard). Dissolution characteristics in various media correspond to the nifedipine solubility in the medium. Peak nifedipine concentrations with 0.05 M phosphate buffer containing 0.5% Tween were significantly higher than those in the medium without Tween (21.5±1.0 vs 8.3±0.2 μg/mL, p c 0.001). Using a 0.05 M phosphate buffer with no Tween, the products tested showed distinct dissolution profiles representative of the respective formulation type. The conventional release product (10 mg) showed a higher mean peak nifedipine concentration (C_max,d) of 49.5±2.4 pg/mL (p < 0.001) attained at (t_max,d) 0.46±0.05 h as compared to those of modified-release products. The corresponding mean values for the modified-release tablets were 8.3±0.2 and 2.6±.3 μg/mL for C_max,d, and 0.28±0.03 and 12.0±3.8 h for t_max,d for the 20 and 30 mg tablets, respectively. Area under the concentration-time curves (AUC_o-t,d) for the 10, 20 and 30 mg formulations were 12.3±0.4,20.5±2.6 and 32.6±3.7 μg.h/mL, respectively (p < 0.001). As the dissolution profiles are similar to those of plasmakerum drug concentrations-time profiles obtained from clinical studies, application of this dissolution method, along with the derived in vitro drug-release kinetics parameters for potential correlation with in vivo parameters are discussed. The results of this study show that, compared to the USP dissolution method using apparatus 1 or 2, the flow-through dissolution system offers a potentially better alternative to assess drug release characteristics for different types of formulations, especially for drugs of low aqueous solubility such as nifedipine.     

Average Bioequivalence of Clarithromycin Immediate Released Tablet Formulations in Healthy Male Volunteers

Abstract

The objective of this study was to assess average bioequivalence of two immediate released tablet formulations of 500-mg clarithromycin tablets in 24 healthy Thai male volunteers. In a randomized, single dose, fasting state, two-period, crossover study design with a 1-week washout period, each subject received a 500-mg clarithromycin tablet. Plasma samples were collected over a 24-hour period after oral administration and were analyzed by using a validated method using high performance liquid chromatography with electrochemical detection. Pharmacokinetic parameters were determined by using noncompartmental analysis. The time to reach the maximal concentration (t_max, h), the peak concentration (C_max, ng/mL), and the area under the curve (AUC_{0 ? ∞}, ng.h/mL) of the Reference and Test formulations were 2.0 ± 0.8 vs. 2.2 ± 0.9, 2793 ± 1338 vs. 2642 ± 1344, and 17912 ± 7360 vs. 17660 ± 7992, respectively. Relative bioavailability was 0.99. The 90% confidence interval of C_max and AUC_{0 ? ∞} were 82.6–112.1% and 84.7–112.0%. Bioequivalence between the Test and Reference formulation can be concluded.     

Formulation and pharmacokinetics of gelucire solid dispersions of flurbiprofen

Context: Development of solid dispersions is to improve the therapeutic efficacy by increasing the drug solubility, dissolution rate, bioavailability as well as to attain rapid onset of action.

Objective: The present research deals with the development of solid dispersions of flurbiprofen which is poorly water soluble to improve the solubility and dissolution rate using gelucires.

Materials and methods: In this study, solid dispersions were prepared following solvent evaporation method using gelucire 44/14 and gelucire 50/13 as carriers in different ratios. Then the formulations were evaluated for different physical parameters, solubility studies, DSC, FTIR studies and in vitro dissolution studies to select the best formulation that shows rapid dissolution rate and finally subjected to pharmacokinetic studies.

Results and discussion: From the in vitro dissolution study, formulation F3 showed the better improvement in solubility and dissolution rate. From the pharmacokinetic evaluation, the control tablets produced peak plasma concentration (C_max) of 9140.84?±?614.36?ng/ml at 3?h T_max and solid dispersion tablets showed C_max?=?11?445.46?±?149.23?ng/ml at 2?h T_max. The area under the curve for the control and solid dispersion tablets was 31?495.16?±?619.92 and 43?126.52?±?688.89?ng h/ml and the mean resident time was 3.99 and 3.68?h, respectively.

Conclusion: From the above results, it is concluded that the formulation of gelucire 44/14 solid dispersions is able to improve the solubility, dissolution rate as well as the absorption rate of flurbiprofen than pure form of drug.     

Pharmacokinetics of a novel nifedipine and pH-sensitive N-succinyl chitosan/alginate hydrogel bead in rabbits

Context: A novel N-succinyl chitosan/alginate hydrogel bead was prepared by the ionic gelation method for controlled delivery of nifedipine (NF). Objective: The delivery behavior of NF from the hydrogel bead was studied in rabbit body. Materials and methods: Nitrendipine was used as the internal standard and the concentration of NF in serum was determined by reversed-phase high-performance liquid chromatography. Results: The assay was linear from 5 to 755 ng/mL. The limit of quantitation for NF was 5 ng/mL in serum, and the recovery was greater than 90%. The method was used to determine the concentration–time profiles of NF in the serum. The pharmacokinetic parameters were calculated by Drug and Statistics (ver 1.0) program. The mean Cmax was 320.2 ± 71.3 μg/L, the mean Tmax was 3.2 ± 0.5 hours, the mean t1/2 was 6.60 ± 2.17 hours, the mean AUC0-24 was 2.03 ± 0.25 mg h/L, the mean AUC0-∞ was 2.50 ± 0.36 mg h/L, the mean MRT0-24 was 8.57 ± 0.19 hours, and the mean MRT0-∞ was 15.2 ± 1.8 hours. Discussion and conclusion: The pharmacokinetic characteristics were found by a two-compartment model following the oral administration of NF-loaded N-succinyl chitosan/alginate hydrogel beads in rabbits.     

Formulation and in Vitro and in Vivo Availability of Diclofenac Sodium Enteric-Coated Beads

Abstract

Diclofenac sodium enteric-coated beads were prepared using the conventional pan coating technique. Eudragit L₁₀₀ was used as a pH-dependent release-controlling polymer. The beads were evaluated for their particle size distribution, drug loading efficiency, flowability, in vitro release in 0.1 N HCI (pH 1.2) and phosphate buffer (pH 6.8), and bioavailability in beagle dogs relative to the commercial enteric-coated tablets Voltaren®. The beads showed a narrow particle size distribution in which 83% of the beads were in the range of 1-2 mm. The actual yield of the beads was 90.5% and their drug loading was 92%. The beads released about 8% of the drug during 2 hr of dissolution in 0.1 N HCI, and the commercial tablets released no drug. In phosphate buffer (pH 6.8) both formulations released their drug content in 1 hr. Both formulations are, therefore, in compliance with the USP requirements for release from enteric-coated dosage forms.

The in vivo availability study in six beagle dogs revealed that the formulated enteric-coated beads filled in hard gelatin capsules had a 197.54% bioavailability relative to that of the commercial Voltaren tablets. The tablets showed a significantly lower (p < 0.05) area under curve for 0—8 hr (AUC_{0-8 hr}) of 13.44 ± 15.02 μg hr/ml compared to 26.55 ± 5.19 μg hr/ml for the capsules. The capsules showed a nonsignificantly (p > 0.05) higher peak plasma concentration (C^max) of 6.77 ± 0.67 μg/ml compared to 5.88 ± 7.38 μg/ml for the tablets. The time to reach peak (T_max) values were 2 ± 1.48 and 2.25 ± 1.08 hr for the capsules and tablets, respectively. The capsules showed less interdog variability with respect to C_max (CV% 34.6) and AUC (CV% 19.55) compared to CV% 79.9 and 111.76, respectively, for the commercial tablets     

Pharmacokinetic properties and bioequivalence of candesartan cilexetil in Korean healthy volunteers

Candesartan is a long-acting and selective nonpeptide AT₁ subtype angiotensin II receptor antagonist. The aim of this study was to compare the pharmacokinetics and to evaluate the bioequivalence of two candesartan cilexetil 16?mg formulations. Forty healthy volunteers were randomly assigned into two groups. After a single dose of 16?mg candesartan cilexetil oral administration, blood samples were collected at specific time intervals from 0–36?h. The plasma concentrations of candesartan cilexetil were determined by LC-MS/MS. The pharmacokinetic parameters such as AUC_last, AUC_inf and C_max were calculated and the 90% confidence intervals of the ratio (test/reference) pharmacokinetic parameters were obtained by analysis of variance on logarithmically transformed data. The mean for AUC_last in the reference and the test drug were 1530.1?±?434.6 and 1315.7?±?368.6 ng·h/mL. The mean for AUC_inf in the reference and the test drug were 1670.0?±?454.5 and 1441.2?±?397.8 ng·h/mL. The mean value for C_max in the reference and the test drug was 142.6?±?41.0 and 134.9?±?41.4?ng/mL. The 90% confidence intervals for the AUC_last, AUC_inf and C_max were in the range of log 0.81–log 0.91, log 0.81–log 0.91 and log 0.88–log1.01, respectively. No adverse events were reported by subjects or found on analysis of vital signs or laboratory tests. This single dose study found that the test and reference products met the regulatory criteria for bioequivalence in these health volunteers. Both formulations were safe and well tolerated in 16?mg of candesartan cilexetil hydrochloride.     

Thermal sintering: a novel technique used in the design,optimization and biopharmaceutical evaluation of propranolol HCl gastric floating tablets

The objective of the present investigation was to study the applicability of thermal sintering technique for the development of gastric floating tablets of propranolol HCl. Formulations were prepared using four independent variables, namely (i) polymer quantity, (ii) sodium bicarbonate concentration, (iii) sintering temperature and (iv) sintering time. Floating lag time and t₉₅ were taken as dependent variables. Tablets were prepared by the direct compression method and were evaluated for physicochemical properties, in vitro buoyancy and dissolution studies. From the drug release studies, it was observed that drug retarding property mainly depends upon the sintering temperature and time of exposure. The statistically optimized formulation (PTSso) was characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry studies, and no significant chemical interaction between drug and polymer was observed. Optimized formulation was stable at accelerated conditions for a period of six months. PTSso was evaluated for in vivo buoyancy studies in humans for both fed and fasted states and found that gastric residence time of the floating tablets were enhanced by fed stage but not in fasted state. Optimized formulation PTSso and commercial formulation Ciplar LA 80 were subjected to bioavailability studies in healthy human volunteers by estimating pharmacokinetic parameters such as C_max, T_max, area under curve (AUC), elimination rate constant (K_el), biological half-life (t_1/2) and mean residence time (MRT). There was a significant increase in the bioavailability of the propranolol HCl from PTSso formulation, which was evident from increased AUC levels and larger MRT values than Ciplar LA 80.     

Study on the Ocular Pharmacokinetics of Ion-Activated In Situ Gelling Ophthalmic Delivery System for Gatifloxacin by Microdialysis

The poor bioavailability and therapeutic response exhibited by conventional ophthalmic solutions due to rapid precorneal elimination of the drug may be overcome by the use of gel system. The present work was conducted to evaluate the relative bioavailability of ion-activated in situ ophthalmic gel of gatifloxacin by microdialysis. The conventional ophthalmic solution of gatifloxacin was used as reference. The AUC of test group is 3.8-fold vs. the reference group (1.4316 ± 0.1327 μg·mL^?1·h vs. 0.3756 ± 0.0380 μg·mL^?1·hr) (P < 0.05), and the C_max of test group vs. the control group is 3.0-fold (0.3363 ± 0.0634 μg·mL^?1 vs. 0.1112 ± 0.0151 μg·mL^?1) (P < 0.05). The T_max of test group is longer than that of reference group (2.0 ± 0.67 hr vs. 0.667 ± 0.17 hr) (P < 0.1), and K_e of test group is lower than that of reference group. The developed formulation has a higher bioavailability and longer residence time in aqueous humor than conventional ophthalmic solutions. The developed system is a viable alternative to conventional eye drops.     

Fabrication of novel GMO/Eudragit E100 nanostructures for enhancing oral bioavailability of carvedilol

In the present work, novel nanostructures comprising of glyceryl monooleate (GMO) and Eudragit E100 were prepared using high intensity ultrasonic homogenization. 3² Factorial design approach was used for optimization of nanostructures. Results of regression analysis revealed that the amount of GMO and Eudragit E100 had a drastic effect on particle size and percent entrapment efficiency. Optimized carvedilol-loaded nanostructures (Car-NS) were characterized by FTIR, TEM, DSC, in vitro drug release study. Pharmacokinetic parameters such as C_max, T_max, Ke, Ka, V_d and AUC were estimated for Car-NS upon its oral administration in Sprague-Dawley rats. Particle size of Car-NS was found to be 183?±?2.43?nm with an entrapment efficiency of 81.4?±?0.512%. FTIR studies revealed loading and chemical compatibility of carvedilol with the components of nanostructures. DSC thermograms did not show endothermic peak for melting of carvedilol which could be attributed to solubilization of carvedilol in molten GMO during DSC run. The prepared Car-NS released carvedilol in sustained manner over a period of 10 h as suggested by in vitro drug release study. The pharmacokinetic study of Car-NS showed significant improvement in C_max (two fold, p?p?相似文献   

Preparation,release and pharmacokinetics of a risperidone elementary osmotic pump system

Preparation and in vitro/in vivo evaluation of risperidone elementary osmotic pump (RIS-EOP) formulations were investigated. A method for the preparation of RIS-EOP tablets was developed by modulating RIS solubility with citric acid. The influence of osmotic agents and the compositions of semipermeable membrane on drug release profiles was evaluated. The formulation of RIS-EOP was optimized by orthogonal design. The in vitro release profile of the optimum formulation achieved to deliver RIS at an approximate zero-order up to 12?h. The pharmacokinetic profiles of RIS-EOP were evaluated compared with immediate release tablets in beagle dogs. The mean t_max and mean residence time of RIS-EOP for RIS and its active metabolite, 9-hydroxyrisperidone, were remarkably longer, compared with immediate release tablets. These results corroborated prolonged release of RIS from EOP formulations. Moreover, drug plasma levels with lower fluctuations could be achieved with RIS-EOP tablets. These results suggested that increasing drug solubility by adding or reacting with alkali/acid might be used for the preparation of EOP tablets of certain poorly water-soluble drugs.     

Preparation and in vitro/in vivo evaluation of azilsartan osmotic pump tablets based on the preformulation investigation

The objective of this study was to design and evaluate azilsartan osmotic pump tablets. Preformulation properties of azilsartan were investigated for formulation design. Azilsartan osmotic pump tablets were prepared by incorporation of drug in the core and subsequent coating with cellulose acetate and polyethylene glycol 4000 as semi-permeable membrane, then drilled an orifice at the center of one side. The influence of different cores, compositions of semipermeable membrane and orifice diameter on azilsartan release were evaluated. The formulation of core tablet was optimized by orthogonal design and the release profiles of various formulations were evaluated by similarity factor (f₂). The optimal formulation achieved to deliver azilsartan at an approximate zero-order up to 14?h. The pharmacokinetic study was performed in beagle dogs. The azilsartan osmotic pump tablets exhibited less fluctuation in blood concentration and higher bioavailability compared to immediate-release tablets. Moreover, there was a good correlation between the in vitro dissolution and in vivo absorption of the tablets. In summary, azilsartan osmotic pump tablets presented controlled release in vitro, high bioavailability in vivo and a good in vitro-in vivo correlation.     

A formulation approach for development of HPMC-based sustained release tablets for tolterodine tartrate with a low release variation

Objective: The purpose of this study was to develop hydroxypropylmethylcellulose (HPMC)-based sustained release (SR) tablets for tolterodine tartrate with a low drug release variation.

Methods: The SR tablets were prepared by formulating a combination of different grades of HPMC as the gelling agents. The comparative dissolution study for the HPMC-based SR tablet as a test and Detrusitol^® SR capsule as a reference was carried out, and the bioequivalence study of the two products was also conducted in human volunteers.

Results: The amount of HPMC, the grade of HPMC and the combination ratio of different grades of HPMC had remarkable effects on drug release from the SR tablets. Both the test and reference products had no significant difference in terms of comparative dissolution patterns in four different media (f₂ > 50). Furthermore, the dissolution method and rotation speed showed no effects on the drug release from the two products. The 90% confidence intervals of the AUC_0–36 and C_max ratios for the test and reference products were within the acceptable bioequivalence intervals of log0.8–log1.25.

Conclusions: A HPMC-based SR tablet for tolterodine tartrate with a low release variation was successfully developed, which was bioequivalent to Detrusitol^® SR capsule.     

Considerations in the development of an in vitro dissolution condition for lacidipine tablets: in vivo pharmacokinetic evaluation

In this study, a new discriminative dissolution condition for lacidipine tablets was developed by the established in vitro–in vivo relationship. Series of dissolution media of phosphate buffer solution (PBS) covering the pH range of 1–7.2 and pH 6.8 PBS containing different concentrations of sodium dodecyl sulfate (SDS), were prepared and used to investigate the dissolution behavior of lacidipine tablets. There was an obvious difference in the dissolution profiles of the both brands in pH 6.8 PBS medium containing 0.1% SDS. The pharmacokinetic study of the two lacidipine tablets was carried out in the healthy beagle dogs at a single dose of 4?mg. Statistical comparison of the AUC_0–24, C_max, and T_max showed a significant difference in the two brand tablets, coinciding with the dissolution performance with pH 6.8 PBS containing 0.1% SDS. The superiority of the proposed system, pH 6.8 PBS containing 0.1% SDS, could serve as a dissolution medium for lacidipine tablets, and more important it could discriminate the in vivo pharmacokinetic behavior for different brands of products. In summary, in vivo pharmacokinetic evaluation is essential to develop an appropriate in vitro dissolution condition for oral solid dosage forms of poorly soluble drugs.