Modified drug release of poloxamer matrix by including water-soluble and water-insoluble polymer

Background: The ability of poloxamer 407 to control drug release was investigated along with the effect of incorporation of a second polymer with poloxamer on dissolution behavior. Methods: Tablets made of 30% w/w/ theophylline and 15%, 25%, 50%, or 69% poloxamer were prepared. Additionally, tablets containing mixture of poloxamer with carbomer or hypromellose in a 1:1 ratio and at different total levels (15%, 30%, and 50%) were also tested. Results: Data show that as the level of poloxamer increased, drug release decreased. Formulations containing poloxamer: hypromellose 1:1 at 50% level and formulations containing poloxamer: carbomer 1:1 at 30% level produced controlled release matrices over 24 hours of testing dissolution. The mechanism of drug release follows anomalous relaxation non-Fickian diffusion model. Conclusions: These results suggest that the combination of poloxamer 407 with hypromellose or carbomer is feasible and has potential to offer the formulator control over drug release.     

Formulation and Release Kinetics of Sustained Release Phenylpropanolamine Hydrochloride Granules and Tablets

Abstract

Sustained release phenylpropanolamine hydrochloride (PPH) granules and tablets were prepared using HPMC, HPMC and SCMC, Eudragit RS, Eudragit RS+L or HPMC + Eudragit RS matrices. The release pattern of PPH from the prepared granules and tablets was found to be in the following order HPMC > HPMC + SCMC > RS > RS + 1> HPMC + RS. The results revealed that, although the drug concentration was kept constant in all the prepared granules and tablets, the drug release from these formulations was clearly different and depends mainly on the type of matrix used. The presence of Eudragit L with Eudragit RS and Eudragit RS with HPMC resulted in a marked decrease in the drug release compared with that obtained from the matrix containing HPMC or Eudragit RS alone. The release data of PPH from the prepared granules and tablets were treated mathematically according to zero order, first order, Langenbuchar, modified Langenbucher and Higuchi models. The results revealed that no one model was able adequately to describe the drug release profiles from these formulations. In-vivo studies in human volunteers showed that, the peak urinary excretion of PPH occurred over a sustained period from 2 to 6.5 hr in case of HPMC + SCMC tablets and from 2 to 10 hr in case of either RS+L or HPMC + RS tablets.     

Preparation and characterization of bioadhesive systems containing propolis or sildenafil for dental pulp protection

Purpose: Binary polymeric systems containing poloxamer 407 (P407) and Carbopol 934P (C934P) were designed to deliver propolis extract (PE) or sildenafil citrate for the endodontic treatment (pulp protection).

Methods: Gelation temperature, rheology (flow), bioadhesion, and in vitro drug release of formulations were determined.

Results: Formulations showed thermoresponsive behavior, existing as a liquid at room temperature and gel at 34–37°C. In addition, they exhibited pseudoplastic flow and low degrees of thixotropy or rheopexy. The greatest bioadhesion was noted in the formulation containing 20% P407 (w/w) and 0.10% C934P (w/w). PE release from formulation containing 15% P407 (w/w) and 0.25% C934P (w/w) was controlled by the phenomenon of relaxation of polymer chains. Moreover, sildenafil release from formulation containing 20% P407 (w/w) and 0.10% C934P (w/w) was controlled by Fickian diffusion.

Conclusion: The data obtained on these formulations indicate a potentially useful role in the endodontic treatment (pulp protection) and suggest they are worthy of clinical evaluation.     

可注射乙酰化乙二醇壳聚糖/泊洛沙姆复合水凝胶的制备及药物缓释研究EI北大核心CSCD

泊洛沙姆(poloxamer)是一种温敏性聚合物,在浓度为15.0%(质量分数,下同)~30.0%时可形成凝胶。为改善泊洛沙姆在体温下的成胶浓度和药物缓释性能,以泊洛沙姆407为基底,与新型温敏性乙酰化乙二醇壳聚糖复合,制得了温敏性乙酰化乙二醇壳聚糖/泊洛沙姆复合水凝胶。通过傅里叶变换红外光谱(FT-IR)、试管倒置法、旋转流变仪、扫描电子显微镜(SEM)和紫外-可见分光光度计(UV-vis)对乙酰化乙二醇壳聚糖/泊洛沙姆的结构、温敏性、力学性能、微观形貌和体外药物释放性能进行表征。结果表明,乙酰化乙二醇壳聚糖/泊洛沙姆溶液具有热可逆温敏性溶胶-凝胶转变行为。通过控制乙酰化乙二醇壳聚糖/泊洛沙姆的质量比,能够使溶胶-凝胶转变温度处于室温与体温(25~37℃)之间,缩短凝胶化时间(382s),降低泊洛沙姆407在体温下的成胶浓度(6%)。乙酰化乙二醇壳聚糖/泊洛沙姆复合水凝胶具有高度孔隙化的三维结构,其孔径大小处于10~60μm范围内,且表现出较高的力学性能。乙酰化乙二醇壳聚糖/泊洛沙姆复合水凝胶对抗癌药物吉西他滨具有缓释作用,载药凝胶的释药时间可达72 h。乙酰化乙二醇壳聚糖/泊洛沙姆复合水凝胶在可注射药物缓释载体方面具有重要的应用前景。     

Influence of polymer blends on the characterization of gliclazide – encapsulated into poly (Æ-caprolactone) microparticles

Gliclazide (GLZ)-loaded microparticles made with a polymeric blend were prepared by a solvent evaporation technique. Organic solutions of two polymers, poly(?-caprolactone) (PCL) and Eudragit RS (E RS) or ethyl cellulose (EC), in different weight ratios, and 33.3% of GLZ were prepared and dropped into aqueous solution of poly vinyl alcohol, in different experimental conditions, achieving drug-loaded microparticles. The obtained microparticles were characterized in terms of yield of production, shape, size, surface properties, drug content, and in vitro drug release behavior. The physical state of the drugs and the polymer was determined by scanning electron microscopy (SEM), Fourier transform infra red and differential scanning calorimetry. Following the in vitro release studies microparticles made from blends of polymer, PCL/E RS or EC showed slower drug release than microparticles made from single PCL polymer. Surface morphology also revealed presence of porous and spherical structure of microparticles. Microparticles showing sustained release of GLZ were examined in rabbits and plasma GLZ concentrations were calculated using HPLC method of assay.     

The Effect of Polymer Coating Systems on the Preparation, Tableting, and Dissolution Properties of Sustained-Release Drug Pellets

The preparation of sustained-release (SR) drug pellets and their tablets was evaluated. Pellets containing indomethacin, pseudoephedrine hydrochloride (P-HCl), or pseudoephedrine (P) base were prepared by spraying a mixture of drug, Eudragit S-100 resins, dibutyl sebacate, and alcohol onto nonpareil seeds via the Wurster-column process. The oven-dried drug/Eudragit S-100 (DS) pellets were coated with different levels of Eudragit RS and Eudragit S-100 acrylic resins. Tablets containing P-HCl or P-base SR pellets, microcrystalline cellulose, and Methocel K4M were compressed. The solubility of the drug entity in the polymer solution was found to be the most critical factor affecting the yield and the physical properties of the resultant DS pellets. Dissolution studies of Eudragit RS coated drug pellets demonstrated that the release profiles depended not only on the physicochemical properties of the drug, particularly aqueous solubility, but also on the coating levels. The release rate profiles of the matrix tablets can be modified by varying the types of P-HCl or P-base SR pellets in the formulation. The release of drug from the matrix tablets is primarily matrix controlled.     

Comparison of simple Eudragit microparticles loaded with prednisolone and Eudragit-coated chitosan-succinyl-prednisolone conjugate microparticles: Part I. Particle characteristics and in vitro evaluation as a colonic delivery system

Objective: Simple Eudragit microparticles loaded with prednisolone and chitosan-succinyl-prednisolone conjugate microparticles coated with Eudragit were prepared and characterized in vitro in order to obtain their basic features as a colonic delivery system.

Materials and methods: Both types of microparticles were prepared by the emulsification-solvent evaporation modified somewhat from the previous one. Their particle size, shape and their drug content were investigated, and in vitro release profiles were examined using JP-15 1st fluid (pH 1.2), JP-15 2nd fluid (pH 6.8) and PBS (pH 7.4) as release media. Furthermore, the regeneration of conjugate microparticles from Eudragit-coated microparticles was investigated under the same incubation conditions.

Results: Simple Eudragit S100 (EuS) microparticles (ES-M) were almost spherical, ca. 1.2 μm diameter, and PD content ca. 3.7% (w/w). Conjugate microparticles (CS-M1) and EuS-coated conjugate microparticles (CS-M1/S) had particle sizes of ca. 2.8 and 15.3 μm, respectively, and PD contents of 5.4 and 2.1% (w/w), respectively. ES-M exhibited suppressed release at pH 1.2, gradual release at pH 6.8 and rapid release at pH 7.4. CS-M1 showed no release at pH 1.2, and very slow release at pH 6.8 and 7.4. CS-M1 regenerated poorly from CS-M1/S at pH 6.8.

Conclusions: Simple Eudragit micrparticles and Eudragit-caoted conjugate microparticles, prepared by the present methods, were found in vitro to be possibly useful as the delivery systems of PD to the lower intestine, although there were differences in their release rate and morphological features.     

Effect of Microsphere Size and Formulation Factors on Drug Release from Controlled-Release Furosemide Microspheres

Controlled-release furosemide microspheres were prepared with various combinations of Eudragit L: Eudragit RS and Eudragit S: Eudragit RS and release of drug from microspheres containing these polymers in different ratios was studied. A wide range of release rates of drug can obtained by a simple change in the ratio of polymers. An increase in Eudragit RS content of polymer microsphere matrix brought about a decrease in the release rate.

On the other hand, the effect of particle size on the drug release rate from furosemide microspheres was also investigated. The effect of microsphere sizes on release rate depends on the type of Eudragit. The decrease in release rates of small microspheres may be due to agglomerate formation. Dissolution data indicated that the release followed Higuchi's matrix model kinetics.     

Controlled Release Salbutamol Sulphate Molded Tablets Using Eudragit Retard

Abstract

Permeable acrylic resins were used as efficient retarding materials to prepare controlled release salbutamol sulphate molded tablets. The formulation is simple, efficient, economic and is easily shaped into molded tablets. The effects of two types of acrylic resins, namely: Eudragit RL100 ad Eudragit RS100 in concentrations 1, 2 and 5% w/w on the physical characteristics as well as on the in vitro release patterns of salbutamol sulphate from molded tablets prepared with either polyethylene glycol (PEG) 4000 or 6000 were studied. It was revealed that, as the molecular weight of the PEG increased, the hardness of the tablets increased. Considerable retardation in the drug release was observed by using Eudragit RS100 as compared to Eudragit RL100. The formulation prepared with PEG 6000 and 5% Eudragit RS100 produced much more release time prolongation than the other tested formulations. On the other hand, tablets prepared by the direct compression technique produced a faster release of salbutamol sulphate than those prepared by molding.     

In vitro and in vivo evaluation of cubosomal in situ nasal gel containing resveratrol for brain targeting

The aim of this study was to enhance the delivery of resveratrol to the brain through the transnasal route by cubosomes. Cubosomes were prepared using glycerol monooleate and Lutrol F127 by probe sonication method. A 3² full factorial design was used for optimization of cubosomes and batch containing 4% w/v glycerol monooleate and 1.5% w/v of Lutrol F 127 was optimized. The selected cubosomal batch was cubical in shape, having mean particle size 161.5?±?0.12?nm. Entrapment efficiency was found to be 83.08% with zeta potential of –20.9?mV. In vitro release of cubosomal batch showed controlled release of drug profile (67%) up to 24?h. The optimized cubosomal dispersion was dispersed into gelling polymer (poloxamer 407) to form in situ gel for nasal use. The optimal cubosomal gel (containing 12% w/v poloxamer 407) had been subjected to ex-vivo permeation and in vivo biodistribution studies. It showed significantly higher transnasal permeation and better distribution to brain, when compared to the drug solution (i.n.) and drug solution (oral). Finally the cubosomal gel could be considered as a promising carrier for brain targeting of Resveratrol (Res) through transnasal route.     

Cyclodextrin–poloxamer aggregates as nanocarriers in eye drop formulations: dexamethasone and amphotericin B

In this present study cyclodextrin (CD)–poloxamer aggregates were characterized and developed as ophthalmic drug carriers. The combined effect of γCD/2-hydroxypropyl-γCD (HPγCD) mixtures and poloxamer on solubilization and permeability of two model drugs, dexamethasone (Dex) and amphotericin B (AmB), was investigated. The CD–poloxamer interaction and complex aggregation were examined by ¹H nuclear magnetic resonance (¹H-NMR), their solubilizing ability by high-performance liquid chromatography, and their particle size determined by dynamic light scattering and transmission electron microscopy. Formulations containing either 1.5% w/v Dex or 0.15% w/v AmB in eye drop suspensions containing various γCD/HPγCD ratios and poloxamer 407 (P407) were prepared. The solubility of the drugs, surface tension and hemolytic effect of the eye drops and drug permeation from selected formulations were determined. The ¹H-NMR study showed that P407 formed inclusion complex with CDs by inserting its poly(propylene oxide) segment into the CD cavity. P407 and γCD interacted with each other to form nanosized aggregates, and the observed concentration of dissolved γCD and P407 progressively decreased with increasing γCD and P407 concentrations. Including a high proportion of HPγCD improved the drug solubilization and reduced the hemolytic effect. The surface tension of the formulations decreased with increasing P407 concentration. Furthermore, increasing P407 content in the formulations enhanced formation of complex aggregates with consequent slower drug release. It was concluded that the drug/γCD/HPγCD complex was stabilized by P407 through formation of multi-component aggregates. Thus, CD–poloxamer aggregates are self-assembled nanocarriers from which drug delivery characteristics can be adjusted by changing the γCD/HPγCD/P407 ratios.     

Controlled Release Salbutamol Sulphate Molded Tablets Using Eudragit Retard

Permeable acrylic resins were used as efficient retarding materials to prepare controlled release salbutamol sulphate molded tablets. The formulation is simple, efficient, economic and is easily shaped into molded tablets. The effects of two types of acrylic resins, namely: Eudragit RL100 ad Eudragit RS100 in concentrations 1, 2 and 5% w/w on the physical characteristics as well as on the in vitro release patterns of salbutamol sulphate from molded tablets prepared with either polyethylene glycol (PEG) 4000 or 6000 were studied. It was revealed that, as the molecular weight of the PEG increased, the hardness of the tablets increased. Considerable retardation in the drug release was observed by using Eudragit RS100 as compared to Eudragit RL100. The formulation prepared with PEG 6000 and 5% Eudragit RS100 produced much more release time prolongation than the other tested formulations. On the other hand, tablets prepared by the direct compression technique produced a faster release of salbutamol sulphate than those prepared by molding.     

Preparation and evaluation of in situ gelling ophthalmic drug delivery system for methazolamide

Purpose: In this study, a thermosensitive in situ gelling vehicle was prepared to increase the precorneal resident time and the bioavailability of methazolamide (MTA). Method: Poloxamer analogs were used as the gelling agents, and the in situ gel was obtained by using a cold method. The gelation temperature, rheological properties, in vitro release as well as in vivo evaluation (the elimination of MTA in aqueous humor and intraocular-lowering effect) of the optimized formulations were investigated. Results: The optimum concentrations of poloxamer analogs for the in situ gel-forming delivery system were 21% (w/w) poloxamer 407 and 10% (w/w) poloxamer P188. This formulation was able to flow freely under nonphysiological conditions and underwent sol–gel transition in the cul-de-sac upon placement into the eye. In vitro release studies demonstrated a diffusion-controlled release of MTA from the poloxamer solutions over a period of 10 hours. In vivo evaluation indicated that the poloxamer solutions had a better ability to retain drug than MTA eyedrops did. Conclusion: These results suggested that in situ gelling ophthalmic drug delivery system may hold some promise in ocular MTA delivery.     

Film Coated Pellets Containing Verapamil Hydrochloride: Enhanced Dissolution into Neutral Medium

Abstract

Weakly basic drugs, such as verapamil hydrochloride, that are poorly soluble in neutral/alkaline medium may have poor oral bioavailability due to reduced solubility in the small intestine and colon. Film coated pellets were prepared using two strategies to enhance drug release at high pH values. Firstly, pellets were coated with Eudragit® RS/hydroxypropyl methylcellulose acetate succinate (HMAS) mixtures in proportions of 10:1 and 10:3, respectively. The enteric polymer, HMAS, would dissolve in medium at pH>6 creating pores through the insoluble Eudragit RS membrane to increase drug release. Secondly, an acidic environment was created within the core by the inclusion of fumaric acid at concentrations of 5 and 10% in order to increase drug solubility. Both strategies enhanced drug release into neutral medium in dissolution studies using the pH change method to simulate GIT transit. Dissolution profiles of samples tested in pH 1.2 for 12 hr were compared with those using the pH change method (pH 1.2 for first 1.5 hr, pH raised to 6.8 for remaining 10.5 hr) using the area under the dissolution curve (AUC), the dissolution half-life (t_50%), and the amount of drug released in 3 hr (A_{3 hr}) values. Both strategies enhanced drug release into neutral medium although the strategy using HMAS in the film was more effective. The formulation least affected by pH change was a combination of the two strategies, i.e., pellets containing 5% fumaric acid coated with Eudragit RS 12% w/w and HMAS 1.2% w/w.     

Preparation and characterization and release properties of Eudragit RS based ibuprofen pellets prepared by extrusion spheronization: effect of binder type and concentration

Objective: The effects of type and concentration of binding agent on properties of Eudragit RS based pellets were studied.

Materials and methods: Pellets containing ibuprofen (60%), Eudragit RS (30%), Avicel (10%) were prepared by extrusion spheronization. PVP K30, PVP K90, HPMC 6cp, HPMC K100LV or HPMC K4M were used as binders in concentrations of 2, 4 or 6% based on the total weight of formulation. The process efficiency, pellet shape, size distribution, crushing strength, elastic modulus and drug release were examined. The effect of curing on pellet properties was also investigated.

Results: The process of extrusion spheronization became difficult with increase in binder viscosity and/or concentration. An increase in binder viscosity and/or concentration resulted in reduction in the yield of pellets, wider particle size distribution and departure from spherical shape especially in the case of HPMC binder. The crushing strength and elastic modulus of pellets decreased with increase in PVPs concentration. However this was not the case for pellets containing HPMCs. Drug release rate increased as the concentration of binder increased. Pellets containing 2%w/w of PVP K30 showed the slowest release rate. For those pellets with brittle nature, curing changed the behavior of pellet under mechanical test to plastic deformation. Yield point and elastic modulus of all formulations decreased after curing. Curing decreased the drug release rate.

Conclusion: Binder type and concentration significantly affected the properties of pellets. For production of sustained release ibuprofen Eudragit RS based pellets lower viscosity binders (PVP K30) with concentrations less than 4%w/w was optimum.     

Preparation and In Vitro Characteristics of Lactoferrin-loaded Chitosan Microparticles

ABSTRACT

In order to achieve the delivery and controlled release of lactoferrin (LF), a biologically multifunctional protein, chitosan microparticles loaded with LF were prepared. Several types of chitosan microparticles containing LF were prepared by the w/o emulsification-solvent evaporation method, and the particle characteristics and release properties in JP 2nd fluid, pH 6.8, were examined. All kinds of microparticles were obtained at a yield of more than 75% (w/w). LF-loaded microparticles prepared by nonsonication and nonaddition of sulfate, named Ch-LF(N), showed high drug content, small particle size and spherical particle shape. Also, for release properties, Ch-LF(N) exhibited gradual drug release over 7 hr with less remaining in the microparticles. Considering the mucoadhesive properties of chitosan microparticles, Ch-LF(N) are suggested to be useful for gradual supply to topical diseased sites or for effective delivery to intestinal areas with abundant LF receptors.     

Preparation and in vitro characteristics of lactoferrin-loaded chitosan microparticles

In order to achieve the delivery and controlled release of lactoferrin (LF), a biologically multifunctional protein, chitosan microparticles loaded with LF were prepared. Several types of chitosan microparticles containing LF were prepared by the w/o emulsification-solvent evaporation method, and the particle characteristics and release properties in JP 2nd fluid, pH 6.8, were examined. All kinds of microparticles were obtained at a yield of more than 75% (w/w). LF-loaded microparticles prepared by nonsonication and nonaddition of sulfate, named Ch-LF(N), showed high drug content, small particle size and spherical particle shape. Also, for release properties, Ch-LF(N) exhibited gradual drug release over 7 hr with less remaining in the microparticles. Considering the mucoadhesive properties of chitosan microparticles, Ch-LF(N) are suggested to be useful for gradual supply to topical diseased sites or for effective delivery to intestinal areas with abundant LF receptors.     

Nifedipine molecular dispersion in microparticles of ammonio methacrylate copolymer and ethylcellulose binary blends for controlled drug delivery: effect of matrix composition

The objective of this study is to explore matrix-type microparticles, comprising a solid dispersion of drug with an ammonio methacrylate copolymer and ethylcellulose binary blend, for use in the controlled release of a poorly water-soluble drug, nifedipine. Microparticles consisting of an ethylcellulose N7 (N7) and Eudragit RL® (RL) binary blend at different ratios were prepared using phase-separation methodology. The effects of matrix composition on microparticle properties were evaluated by polarized light microscopy, differential scanning calorimetry (DSC), FT-infrared and UV-visible spectroscopy, stability, and drug release studies. Study results indicate that the particle size distribution, particle morphology, and drug release rate from the microparticles were influenced by the ratio of RL to N7. Discrete spherical microparticles with a narrow size distribution and a controlled release profile were obtained when the ratio of RL to N7 was in the range from 1:1 to 2:1 w/w. Solid-state characterization and release kinetic studies on these microparticles confirmed that the nifedipine release from the microparticles followed the Baker and Lonsdale's matrix diffusion model (1974) for microspheres containing dissolved drug, and the nifedipine diffusion in the microparticle matrix was the rate-limiting step. As the ratio of RL to N7 was changed from 0:1 to 4:1 w/w, the effective drug diffusion coefficient in the micro-matrix increased from 5.8 × 10^-10 to 8.6 × 10^-9 (cm²/h). In addition, probably due to formation of a stable molecular dispersion promoted by hydrogen bonding between nifedipine and the polymers, no significant changes in the nifedipine physical form or release kinetics were observed after 1-year storage at ambient room temperature followed by 3-month accelerated stability at 40°C/75% RH in a closed container.     

Development and physico-mechanical characterization of carrageenan and poloxamer-based lyophilized matrix as a potential buccal drug delivery system

Context and objectives: The buccal mucosa presents a unique surface for non-invasive drug delivery and also avoids first-pass metabolism. The objective of this study was the formulation development of polymeric mucoadhesive lyophilized wafers as a matrix for potential buccal drug delivery.

Materials and methods: Differential scanning calorimetry (DSC) was used to develop an optimum freeze-cycle, incorporating an annealing step. The wafers were prepared by lyophilization of gels containing three polymers, κ-carrageenan (CAR 911), poloxamer (P407) and polyethylene glycol 600 (PEG 600). The formulations were characterized using texture analysis (for mechanical and mucoadhesion properties), hydration studies, thermogravimetric analysis (TGA), DSC, X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM).

Results and discussion: DSC showed the eutectic temperature (12.8?°C) of the system where the liquid solution and pure solids both existed at a fixed pressure which helped determine the freeze-annealing cycle at 55?°C for 7?h. Mechanical resistance to compression, hydration and mucoadhesion studies showed that optimized wafers were obtained from aqueous gels containing 2% w/w CAR 911, 4% w/w P407 and 4.4% w/w PEG 600. TGA showed residual water of approximately 1% and SEM showed a porous polymeric network that made ease of hydration possible.

Conclusions: Lyophilized wafers by freeze-drying gels containing 2% w/w CAR 911, 4% w/w P407 and 4.4% w/w PEG 600 with optimum physico-mechanical properties has been achieved.     

Film coated pellets containing verapamil hydrochloride: enhanced dissolution into neutral medium

Weakly basic drugs, such as verapamil hydrochloride, that are poorly soluble in neutral/alkaline medium may have poor oral bioavailability due to reduced solubility in the small intestine and colon. Film coated pellets were prepared using two strategies to enhance drug release at high pH values. Firstly, pellets were coated with Eudragit RS/hydroxypropyl methylcellulose acetate succinate (HMAS) mixtures in proportions of 10:1 and 10:3, respectively. The enteric polymer, HMAS, would dissolve in medium at pH > 6 creating pores through the insoluble Eudragit RS membrane to increase drug release. Secondly, an acidic environment was created within the core by the inclusion of fumaric acid at concentrations of 5 and 10% in order to increase drug solubility. Both strategies enhanced drug release into neutral medium in dissolution studies using the pH change method to simulate GIT transit. Dissolution profiles of samples tested in pH 1.2 for 12 hr were compared with those using the pH change method (pH 1.2 for first 1.5 hr, pH raised to 6.8 for remaining 10.5 hr) using the area under the dissolution curve (AUC), the dissolution half-life (t50%), and the amount of drug released in 3 hr (A3hr) values. Both strategies enhanced drug release into neutral medium although the strategy using HMAS in the film was more effective. The formulation least affected by pH change was a combination of the two strategies, i.e., pellets containing 5% fumaric acid coated with Eudragit RS 12% w/w and HMAS 1.2% w/w.