Buccal Drug Delivery Systems

Buccal administration offers certain unique advantages for the drugs which cannot be easily or efficiently administered by oral or intravenous route. However, transbucccal delivery receiived relatively little attention and few well-controlled studies of buccal mucosa permeability have been conducted. The oral mucosa provides a protective covering for the underlying tissue, being as a barrier for microorganisms and toxins. This article extensively reviews the histology of buccal mucosa, permeation studies (both invitro and in vivo) of buccal drug delivery system, their development and various types of techniques and devices available for the delivery of drugs through buccal mucosa.     

Critical evaluation of permeation enhancers for oral mucosal drug delivery

Background: Drug delivery via oral mucosa is an alternative method of systemic administration for various classes of therapeutic agents. Among the oral mucosae, buccal and sublingual mucosae are the primary focus for drug delivery. Buccal delivery offers a clear advantage over the peroral route by avoidance of intestinal and hepatic first-pass metabolism. However, despite offering the possibility of improved systemic drug delivery, buccal administration has been utilized for relatively few pharmaceutical products so far. One of the major limitations associated with buccal delivery is low permeation of therapeutic agents across the mucosa. Various substances have been explored as permeation enhancers to increase the flux/absorption of drugs through the mucosa, but irritation, membrane damage, and toxicity are always associated with them and limit their use. A clinically accepted permeation enhancer must increase membrane permeability without causing toxicity and permanent membrane damage. To date, the information available on oral mucosal permeation enhancement is much less than transdermal enhancement, though oral mucosa is more resistant to damage than other mucosal membranes. This article reviews the various categories of permeation enhancers for oral mucosal drug delivery, their mechanism of action, their usefulness, and the limitations associated with their use. Conclusion: To optimize the concentration of enhancer to limit its toxicity while facilitating an enhancing effect reproducibly will be a big challenge for future developments. Advances in permeability modulation and formulation with appropriate enhancers can provide for effective and feasible buccal drug delivery for many drugs, which otherwise have to be injected or ingested with water.     

Buccal delivery systems

The oral cavity is an attractive site for drug delivery due to ease of administration and avoidance of possible drug degradation in gastrointestinal tract and first-pass metabolism. Buccal drug delivery specifically refers to the delivery of drugs within/through buccal mucosa to affect local/systemic pharmacological actions. This review briefly describes advantages and limitations of buccal drug delivery, anatomical structure of oral mucosa, and methodology in evaluating buccal drug delivery system, focusing on physiology, pharmacology, pathology, and formulation design in line with recent developments in buccal delivery systems.     

Design and Evaluation In Vitro of Controlled Release Mucoadhesive Tablets Containing Chlorhexidine

ABSTRACT

This investigation deals with the development of buccal tablets containing chlorhexidine (CHX), a bis-bis-guanide with antimicrobial and antiseptic effects in the oral cavity, and able to adhere to the buccal mucosa to give local controlled release of drug. A mucoadhesive formulation was designed to swell and form a gel adhering to the mucosa and controlling the drug release into the oral cavity.

Some batches of tablets were developed by direct compression, containing different amounts of hydroxypropylmethylcellulose (HPMC) and carbomer; changing the amount ratio of these excipients in formulations, it is possible easily modulate the mucoadhesive effect and release of drug. The in vitro tests were performed using the USP 26/NF paddle apparatus, a specifically developed apparatus, and a modified Franz diffusion cells apparatus. This last method allows a simultaneous study of drug release rate from the tablets and drug permeation through the buccal mucosa.

Similar tests have also been carried out on a commercial product, Corsodyl gel^®, in order to compare the drug release control of gel with respect to that of the mucoadhesive tablet, as a formulation for buccal delivery of CHX. While the commercial formulation does not appear to control the release, the formulation containing 15% w/w methocel behaves the best, ensuring the most rapid and complete release of the drug, together with a negligible absorption of the active agent as required for a local antiseptic action in the oral cavity.     

Preparation and in-vivo evaluation of dimenhydrinate buccal mucoadhesive films with enhanced bioavailability

Abstract

Dimenhydrinate (DMH)-loaded buccal bioadhesive films for the prevention and treatment of motion sickness were prepared and optimized. This study examines the rate of drug release from the films for prolonged periods of time to reduce or limit the frequency of DMH administration. Based on preliminary studies using various polymers and concentrations, hydroxyethylcellulose (2.5, 3.0, and 3.2%), and xanthan gum (2.8%) were chosen as matrix polymers. The films were analyzed with respect to their mechanical, physicochemical, bioadhesive, swelling, and in-vitro release properties. In in-vivo pharmacokinetic studies, xanthan gum-based DMH buccal film was associated with significantly increased DMH plasma levels between 1 h and 5 h after DMH dosing when compared with an oral drug solution. The area under the curve AUC_{0–7 h} value of the mucoadhesive buccal film was two-fold higher than the oral DMH solution. Histological analysis revealed that DMH films cause mild morphological and inflammatory changes in rabbit buccal mucosa. The DMH buccal film is effective for approximately 7 h, thus representing an option for single-dose antiemetic therapy. This dosage regimen could be particularly beneficial for chain travelers who travel for long periods of time.     

Expression of P-glycoprotein and CYP3A4 along the porcine oral-gastrointestinal tract: implications on oral mucosal drug delivery

Objectives: To characterize the expression of Pgp and CYP3A4 along the oral-gastrointestinal (GI) tract for understanding the potential roles of CY3A4 and Pgp in oral mucosal drug delivery.

Design: Porcine buccal mucosa, sublingual mucosa, esophagus and jejunum, ileum and colon tissues were used for studying the mRNA and protein expression of CYP3A4 and Pgp. mRNA and protein were determined using real-time quantitative polymerase chain reaction (PCR) and western blot, respectively. The expression levels of CYP3A4 and Pgp in different segments of oral-GI tract were compared.

Results: Levels of Pgp mRNA were significantly lower (14–40 times lower) in buccal and sublingual mucosa than that in intestine. In contrast, higher levels of CYP3A4 mRNA were observed in the oral mucosa as compared to that in intestine, but the difference was not statistically different. The levels of Pgp protein along the oral-GI tract followed the order: sublingual ～buccal ～esophagus < jejunum ～ileum ～ colon while the expression of CYP3A4 protein in the oral mucosa was similar to that in intestine.

Conclusion: Expression of Pgp in oral mucosa is lower than that in intestine, while the expression of CYP3A4 in oral mucosa is similar to that in intestine. Because of lower Pgp in oral mucosa, oral mucosal drug delivery can be used as an alternative strategy to avoid the coordination of Pgp and CYP3A4 metabolism in drug absorption. However, CYP3A4-dependent metabolism may play a role in oral mucosal drug delivery as in per oral-GI absorption.     

Optimization of piribedil mucoadhesive tablets for efficient therapy of Parkinson’s disease: physical characterization and ex vivo drug permeation through buccal mucosa

Objective: The aim of this study was optimization of buccal piribedil (PR) mucoadhesive tablets to improve its low bioavailability and provide controlled release for the treatment of Parkinson’s disease.

Methods: Buccal tablets were prepared by direct compression method using carbomer (CP), carboxymethyl cellulose (CMC), and hydroxypropyl methylcellulose (HPMC) as mucoadhesive polymers. Physical properties of powder mixtures and buccal tablets were evaluated. Physicochemical compatibility between ingredients was investigated with infrared spectroscopy and differential scanning calorimetry analysis. In vitro dissolution profiles and drug release kinetics of buccal tablets were investigated. Mucoadhesion and ex vivo permeation studies were performed using sheep buccal mucosa.

Results: Powder mixtures demonstrated sufficient flow properties and physical characteristics of all tablet formulations were within compendia limits. Tablet ingredients were absent of any chemical interactions. CP tablets displayed slower drug release compared to HPMC tablets with zero order release, while CMC tablets lost their integrity and released entire drug after 6?h following Higuchi model. All formulations displayed adequate mucoadhesion and steady state flux of PR through buccal mucosa were higher with HPMC compared to CP-containing tablets.

Conclusion: Overall, HPMC was found to combine desired controlled release and mucoadhesion characteristics with sufficient pharmaceutical quality for optimization of buccal tablets. Piribedil mucoadhesive buccal tablets designed for the first time may introduce a new alternative for the treatment of Parkinson’s disease.     

A New Transmucosal Therapeutic System: Overview of Formulation Development and in Vitro/In Vivo Clinical Performance

Abstract

A new transmucosal therapeutic system (TmTs) was developed for controlled systemic delivery of drugs, which are labile to hepatic “first-pass” metabolism, through oral mucosa. It consists of a fast-release layer, which provides a rapid release of drug for prompt rise in blood drug concentration to reach the therapeutic level, and a sustained-release layer, which releases the drug continuously for sustained duration to maintain the therapeutic level for up to 12 hrs. The sustained-release layer also contains mucoadhesive composition, so TmTs can be applied on gingival mucosa for continuous transmucosal controlled administration of drugs. Using isosorbide dinitrate (ISDN), a well-known antianginal drug which is known to be subjected to extensive presystemic elimination when taken orally, the systemic bioavailability has been improved by 37 fold in beagle dogs and by almost 5 fold in humans compared to that of marketed oral sustained-release tablet and the plasma concentration profile has also been prolonged to 12 hrs from less than 1 hr for marketed sublingual tablet and spray products in both beagle dogs and in human volunteers. Multi-fractional absorption model has been successfully applied for pharmacokinetic analysis, which demonstrates that the rate-limiting step for the transmucosal systemic delivery is the release of ISDN from the TmTs. Clinical studies performed in the anginal patients for up to one year have demonstrated the therapeutic benefits of this TmTs in achieving a substantial reduction in the frequency of anginal attacks and prolongation in the duration of exercise time.     

A New Transmucosal Therapeutic System: Overview of Formulation Development and in Vitro/in Vivo Clinical Performance

Abstract

A new transmucosal therapeutic system (TmTs) was developed for controlled systemic delivery of drugs, which are labile to hepatic “first-pass” metabolism, through oral mucosa. It consists of a fast-release layer, which provides a rapid release of drug for prompt rise in blood drug concentration to reach the therapeutic level, and a sustained-release layer, which releases the drug continuously for sustained duration to maintain the therapeutic level for up to 12 hrs. The sustained-release layer also contains mucoadhesive composition, so TmTs can be applied on gingival mucosa for continuous transmucosal controlled administration of drugs. Using isosorbide dinitrate (ISDN), a well-known antianginal drug which is known to be subjected to extensive presystemic elimination when taken orally, the systemic bioavailability has been improved by 37 fold in beagle dogs and by almost 5 fold in humans compared to that of marketed oral sustained-release tablet and the plasma concentration profile has also been prolonged to 12 hrs from less than 1 hr for marketed sublingual tablet and spray products in both beagle dogs and in human volunteers. Multi-fractional absorption model has been successfully applied for pharmacokinetic analysis, which demonstrates that the rate-limiting step for the transmucosal systemic delivery is the release of ISDN from the TmTs. Clinical studies performed in the anginal patients for up to one year have demonstrated the therapeutic benefits of this TmTs in achieving a substantial reduction in the frequency of anginal attacks and prolongation in the duration of exercise time.     

Mucoadhesive polymers for buccal drug delivery

Raising the concept of mucoadhesion in the 1980s, the use of mucoadhesive polymers for buccal drug delivery has been the subject of interest. Buccal route is one of the non-invasive routes comprising several advantages such as targeting the specific tissue (I), bypassing the first-pass effect (II) as well as higher patient compliance (III) and higher bioavailability (IV) have rendered administration route feasible for a variety of drugs. This review highlights the use of mucoadhesive polymers in buccal drug delivery. An overview of the oral mucosa’s anatomy, theories of mucoadhesion as well as mucoadhesive polymers is given within this review. Furthermore, recent advantages in mucoadhesive polymers according to the variety of drug delivery forms are presented.     

In vitro comparative evaluation of monolayered multipolymeric films embedded with didanosine-loaded solid lipid nanoparticles: a potential buccal drug delivery system for ARV therapy

Drug delivery via the buccal route has emerged as a promising alternative to oral drug delivery. Didanosine (DDI) undergoes rapid degradation in the gastrointestinal tract, has a short half-life and low oral bioavailability, making DDI a suitable candidate for buccal delivery. Recent developments in buccal drug delivery show an increased interest toward nano-enabled delivery systems. The advantages of buccal drug delivery can be combined with that of nanoparticulate delivery systems to provide a superior delivery system. The aim of this study was to design and evaluate the preparation of novel nano-enabled films for buccal delivery of DDI. Solid lipid nanoparticles (SLNs) were prepared via hot homogenization followed by ultrasonication and were characterized before being incorporated into nano-enabled monolayered multipolymeric films (MMFs). Glyceryl tripalmitate with Poloxamer 188 was identified as most suitable for the preparation of DDI-loaded SLNs. SLNs with desired particle size (PS) (201?nm), polydispersity index (PDI) (0.168) and zeta potential (?18.8?mV) were incorporated into MMFs and characterized. Conventional and nano-enabled MMFs were prepared via solvent casting/evaporation using Eudragit RS100 and hydroxypropyl methylcellulose. Drug release from the nano-enabled films was found to be faster (56% versus 20% in first hour). Conventional MMFs exhibited higher mucoadhesion and mechanical strength than nano-enabled MMFs. SLNs did not adversely affect the steady state flux (71.63?±?13.54?µg/cm²?h versus 74.39?±?15.95?µg/cm²?h) thereby confirming the potential transbuccal delivery of DDI using nano-enabled MMFs. Nano-enabled buccal films for delivery of DDI can be successfully prepared, and these physico-mechanical studies serve as a platform for future formulation optimization work in this emerging field.     

A combination of complexation and self-nanoemulsifying drug delivery system for enhancing oral bioavailability and anticancer efficacy of curcumin

Abstract

Objective: Curcumin, the golden spice from Indian saffron, has shown chemoprotective action against many types of cancer including breast cancer. However, poor oral bioavailability is the major hurdle in its clinical application. In the recent years, self-nanoemulsifying drug delivery system (SNEDDS) has emerged as a promising tool to improve the oral absorption and enhancing the bioavailability of poorly water-soluble drugs. In this context, complexation with lipid carriers like phospholipid has also shown the tremendous potential to improve the solubility and therapeutic efficacy of certain drugs with poor oral bioavailability.

Methods: In the present investigation, a systematic combination of both the approaches is utilized to prepare the phospholipid complex of curcumin and facilitate its incorporation into SNEDDS. The combined use of both the approaches has been explored for the first time to enhance the oral bioavailability and in turn increase the anticancer activity of curcumin.

Results: As evident from the pharmacokinetic studies and in situ single pass intestinal perfusion studies in Sprague–Dawley rats, the optimized SNEDDS of curcumin–phospholipid complex has shown enhanced oral absorption and bioavailability of curcumin. The cytotoxicity study in metastatic breast carcinoma cell line has shown the enhancement of cytotoxic action by 38.7%. The primary tumor growth reduction by 58.9% as compared with the control group in 4T1 tumor-bearing BALB/c mice further supported the theory of enhancement of anticancer activity of curcumin in SNEDDS.

Conclusion: The developed formulation can be a potential and safe carrier for the oral delivery of curcumin.     

Development and evaluation of rapidly dissolving buccal films of naftopidil: in vitro and in vivo evaluation

Abstract

Objectives: Development and evaluation of rapidly dissolving film for intra-oral administration of naftopidil.

Significance: Formulation of naftopidil in the form of rapidly dissolving buccal film can eliminate the dissolution problem of naftopidil and provide a greater chance for direct absorption into the systemic circulation bypassing the presystemic metabolism. This can improve the oral bioavailability. In addition, this film guarantees patient compliance and is suitable for geriatric patients.

Methods: Rapidly dissolving film utilized hydroxypropyl methylcellulose E5 and polyvinylpyrrolidone K30 as the main components. The drug was loaded in pure form or after co-grinding with citric and/or tartaric acid. A solution of naftopidil in plurol oleique, labrasol, and tween 80 self-microemulsifying drug delivery systems (SMEDDS) was also loaded. The interactions of the drug with the excipients were monitored using thermal analysis, Fourier transform infrared spectroscopy, and X-ray diffraction. Naftopidil dissolution was monitored and selected films were used to assess the bioavailability after buccal administration to rabbit. Unprocessed drug suspension was administered orally and used as a reference.

Results: Incorporation of naftopidil in the film developed a new crystalline structure. The crystallinity of drug was abolished in the presence of organic acids or SMEDDS. The rapidly dissolving films showed fast liberation of the drug irrespective to the composition. Those films enhanced the bioavailability of naftopidil compared to orally administered suspension with SMEDDS containing film being superior.

Conclusion: The study introduced rapidly dissolving buccal film for enhanced dissolution and bioavailability of naftopidil.     

High-energy ball milling of saquinavir increases permeability across the buccal mucosa

Saquinavir (SQV), a candidate for buccal drug delivery, is limited by poor solubility. This study identified the effects of high-energy ball milling on the buccal permeability of SQV and compared it to the effects of chemical enhancers, i.e. ethylenediaminetetraacetic acid (EDTA), sodium lauryl sulfate (SLS), polyethylene glycol (PEG) and beta cyclodextrin (β-cyclodextrin). SQV was ball milled using a high energy planetary mill (1, 3, 15 and 30?h) and permeation studies across porcine buccal mucosa were performed using franz diffusion cells. Drug was quantified by UV spectrophotometry. Both unmilled and milled SQV samples were able to permeate the buccal mucosa. Milled samples of 15?h displayed the greatest flux of 10.40?±?1.24?µg/cm^2?h and an enhancement ratio of 2.61. All enhancers were able to increase the buccal permeability of unmilled SQV, with SLS achieving the greatest flux (6.99?±?0.7?µg/cm²) and an enhancement ratio of 1.75. However, all the milled SQV samples displayed greater permeability than SLS, the best chemical enhancer for unmilled SQV. Enhanced permeability by ball milling was attributed to reduction in particle size, formation of solid dispersions and an increase in solubility of milled samples. Microscopical evaluation revealed no significant loss in mucosal cellular integrity treated with either unmilled or milled SQV. Histological studies suggest that SQV uses both the paracellular and transcellular route of transport across the mucosa, with drug treatment having no permanent affects. High-energy ball milling was superior to the chemical enhancers studied for enhancement of SQV buccal permeation.     

Evaluation of salmon calcitonin (sCT) enteric-coated capsule for enhanced absorption and GI tolerability in rats

Background: Considering the chronic and repeated nature of salmon calcitonin (sCT) therapy, the oral route is a preferred route of administration. But, the oral bioavailability of sCT is very low due to enzymatic degradation and poor permeation across intestinal epithelial cells. It was the aim of this study to investigate the pharmacodynamic (PD), pharmacokinetic (PK), and mucosal injury characteristic of sCT oral delivery system. Method: In this study, PD experiments were performed to find a suitable releasing region of sCT, an effect absorption enhancer, and an optimal mass ratio of sCT/enhancer. In addition, the PK experiments were designed to validate the absorption enhancement of this oral delivery system. Histopathological evaluations on the intestinal mucosa were carried out to assess any potential toxicity of the absorption enhancer. Results: Through the PD research, we determined that oral sCT enteric-coated capsules containing sCT and citric acid (CA) with a ratio of 1:20 may be an adaptable delivery. PK study further proved that the oral absorption of sCT was enhanced from this delivery system. Finally, no damage on intestinal mucosa was observed when rats received the delivery system containing CA for up to 7 days. Conclusion: These results suggested that enteric-coated capsules with a certain amount of CA might give enhanced oral delivery of peptide drugs like sCT.     

Aloin delivery on buccal mucosa: ex vivo studies and design of a new locoregional dosing system

Context: Chemoprevention of potential malignant disorders or cancerous lesions that affect oral mucosae requires extended duration of treatment. Locoregional delivery of natural products could represent a promising strategy for this purpose.

Objective: To investigate the aptitude of aloin to permeate through, or accumulate in, the buccal mucosa and to develop a new prolonged oro-mucosal drug delivery system.

Materials and methods: Permeation/accumulation of aloin from Curacao Aloe (containing 50% barbaloin) was evaluated ex vivo, using porcine buccal mucosa as the most useful model to simulate human epithelium. Oro-mucosal matrix tablets were prepared by dispersing aloin (10% w/w) in Eudragit® RS 100 as, biocompatible, low permeable, pH-independent, and non-swelling polymer. The prepared tablets were evaluated for drug–polymer compatibility, weight variation, drug uniformity content, diameter, thickness, hardness, friability, swelling, mucoadhesive strength, and drug release.

Results: Aloin has low tendency to cross buccal mucosa, permeation is marginal, and high drug amounts remain entrapped into the epithelium. Matrix tablets characteristics were in agreement with pharmacopoeial requirements. Drug release showed highly reproducible Higuchian profile. Delivery through matrix tablets promoted drug accumulation in the mucosal tissue.

Discussion and conclusion: Following application of matrix tablets on porcine buccal mucosa, the amount of discharged drug recovered in the tissue should be sufficient to produce the desired effects, providing therapeutic drug levels directly at the site of action. Aloin-loaded tablets are valid candidates for prevention/treatment of potentially malignant disorders and oral cancer and could potentially lead to clinically relevant drug delivery system as coadjuvant of conventional chemotherapy/radiation therapy.     

Design,characterization and ex vivo evaluation of chitosan film integrating of insulin nanoparticles composed of thiolated chitosan derivative for buccal delivery of insulin

The purpose of this study is to optimize and characterize of chitosan buccal film for delivery of insulin nanoparticles that were prepared from thiolated dimethyl ethyl chitosan (DMEC-Cys). Insulin nanoparticles composed of chitosan and dimethyl ethyl chitosan (DMEC) were also prepared as control groups. The release of insulin from nanoparticles was studied in vitro in phosphate buffer solution (PBS) pH 7.4. Optimization of chitosan buccal films has been carried out by central composite design (CCD) response surface methodology. Independent variables were different amounts of chitosan and glycerol as mucoadhesive polymer and plasticizer, respectively. Tensile strength and bioadhesion force were considered as dependent variables. Ex vivo study was performed on excised rabbit buccal mucosa. Optimized insulin nanoparticles were obtained with acceptable physicochemical properties. In vitro release profile of insulin nanoparticles revealed that the highest solubility of nanoparticles in aqueous media is related to DMEC-Cys nanoparticles. CCD showed that optimized buccal film containing 4% chitosan and 10% glycerol has 5.81?kg/mm² tensile strength and 2.47?N bioadhesion forces. Results of ex vivo study demonstrated that permeation of insulin nanoparticles through rabbit buccal mucosa is 17.1, 67.89 and 97.18% for chitosan, DMEC and DMEC-Cys nanoparticles, respectively. Thus, this study suggests that DMEC-Cys can act as a potential enhancer for buccal delivery of insulin.     

Absorption of Thyrotropin-Releasing Hormone in Rats Using a Mucoadhesive Buccal Patch

Abstract

Mucoadhesive buccal patches were evaluated in vitro and in vivo using rats for release of thyrotropin-releasing homne (TRH). TRH (10% w/w) was incorporated into mucoadhesive buccal patches that were custom coformulated with silicone and organic polymers (Dow Coming, Midland, MI) and its release profile was characterized in vitro using a modified Franz diffusion cell. TRH released into pH = 7.0 phosphate buffered saline at 37°C under sink conditions was detected using high-performance liquid chromatography (HPLC). Release of TRH in vitro from the buccal patches was rapid during the first 2 hr, with 51% of the total amount of TRH incolporated into the patches released after 24 hr. HPLC analysis indicated that TRH extracted from buccal patches thermally stressed at 40°, 55°, and 70°C showed negligible degradation after 6 months. In contrast, an aqueous TRH solution stored at 70°C showed degradation of TRH as soon as 10 days following incubation at this temperature. TRH patches placed on the buccal mucosa of anesthetized rats demonstrated rapid stimulation and release of thyroid-stimulating hormone (TSH) from the anterior pituitary. Thirty minutes after patch application, plasma concentrations of TSH fluctuated but remained approximately 4–to 7-fold greater than baseline (prior to patch application) TSH concentrations. Therefore, this preliminary study has demonstrated that physiologically active TRH was released from the TRH mucoadhesive buccal patches and systemically absorbed. Thus, the TRH mucoadhesive buccal patches may represent a convenient delivery system for therapeutic peptides.     

Synthesis of β-cyclodextrin hydrogel nanoparticles for improving the solubility of dexibuprofen: characterization and toxicity evaluation

Objective: This study was aimed to enhance aqueous solubility of dexibuprofen through designing β-cyclodextrin (βCD) hydrogel nanoparticles and to evaluate toxicological potential through acute toxicity studies in rats.

Significance: Dexibuprofen is a non-steroidal analgesic and anti-inflammatory drug that is one of safest over the counter medications. However, its clinical effectiveness is hampered due to poor aqueous solubility.

Methods: βCD hydrogel nanoparticles were prepared and characterized by percent yield, drug loading, solubilization efficiency, FTIR, XRD, DSC, FESEM and in-vitro dissolution studies. Acute oral toxicity study was conducted to assess safety of oral administration of prepared βCD hydrogel nanoparticles.

Results: βCD hydrogel nanoparticles dramatically enhanced the drug loading and solubilization efficiency of dexibuprofen in aqueous media. FTIR, TGA and DSC studies confirmed the formation of new and a stable nano-polymeric network and interactions of dexibuprofen with these nanoparticles. Resulting nanoparticles were highly porous with 287?nm in size. XRD analysis revealed pronounced reduction in crystalline nature of dexibuprofen within nanoparticles. Release of dexibuprofen in βCD hydrogel nanoparticles was significantly higher compared with dexibuprofen tablet at pH 1.2 and 6.8. In acute toxicity studies, no significant changes in behavioral, physiological, biochemical or histopathologic parameters of animals were observed.

Conclusions: The efficient preparation, high solubility, excellent physicochemical characteristics, improved dissolution and non-toxic βCD hydrogel nanoparticles may be a promising approach for oral delivery of lipophilic drugs.     

Solid lipid nanoparticles as vesicles for oral delivery of olmesartan medoxomil: formulation,optimization and in vivo evaluation

Objective: Olmesartan medoxomil (OLM) is an antihypertensive drug with low oral bioavailability (28%) resulting from poor aqueous solubility, presystemic metabolism and P-glycoprotein mediated efflux. The present investigation studies the role of lipid nanocarriers in enhancing the OLM bioavailability through oral delivery.

Materials and methods: Solid lipid nanoparticles (SLN) were prepared by solvent emulsion-evaporation method. Statistical tools like regression analysis and Pareto charts were used to detect the important factors effecting the formulations. Formulation and process parameters were then optimized using mean effect plot and contour plots. The formulations were characterized for particle size, size distribution, surface charge, percentage of drug entrapped in nanoparticles, drug–excipients interactions, powder X-ray diffraction analysis and drug release in vitro.

Results and discussion: The optimized formulation comprised glyceryl monostearate, soya phosphatidylcholine and Tween 80 as lipid, co-emulsifier and surfactant, respectively, with an average particle size of 100?nm, PDI 0.291, zeta potential of ?23.4?mV and 78% entrapment efficiency. Pharmacokinetic evaluation in male Sprague Dawley rats revealed 2.32-fold enhancement in relative bioavailability of drug from SLN when compared to that of OLM plain drug on oral administration.

Conclusion: In conclusion, SLN show promising approaches as a vehicle for oral delivery of drugs like OLM.