Polyethyelene Glycols and Drug Release

The dissolution rates of several drugs may be increased by incorporation into solid polyethylene glycols1. These dispersions are usually manufactured by heating a physical mixture of the drug and polymer to the fluid state and subsequently cooling to room temperature.

The physical structure of both the drug and the polyethylene glycol will be discussed, as these factors may affect the rate of drug release from the dispersions2,3. The solid state properties of both components have traditionally been studied by X-ray diffraction and/or by differential scanning calorimetry (DSC). The latter technique has facilitated the use of phase diagrams in the investigation of the melting properties of the dispersions, these usually indicating the presence of eutectics, monotectics, solid solutions or glasses. The application of a further technique, dielectric spectroscopy, in the study of molten and solid dispersions will be described.

The mechanisms by which drug dissolution rate may be enhanced will be described. Furthermore, the kinetics of drug release will be discussed in terms of the non-interactive and interactive models proposed by Corrigan4.     

Studies on solid dispersions of nifedipine

Abstract

Nifedipine-Polyethylene glycol solid dispersions were prepared by melting or fusion method in order to improve nifedipine solubility in the aqueous body fluids. The dissolution rate of the drug was markedly increased in these solid dispersion systems. The increase in dissolution was a function of the ratio of drug to polyethylene glycol used and the molecular weight of polyethylene glycol. The dissolution rate was compared with a 10% w/w physical mixture of drug with polyethylene glycol.

The physical state of nifedipine after fusion was determined by X-ray crystallography on the pure drug and on the solidified melts. The X-ray diffraction studies indicated that nifedipine in the solid dispersion which was obtained by sudden cooling of the melt, was in the thermodynamically unstable metastable form. It was established that the slow cooling of the melt as well as powdering of solid dispersion resulted in the emergence of crystallinity.

The effect of aging on nifedipine-polyethylene glycol 6000 solid dispersions has been investigated. After storage at room temperature for six months, solid dispersions showed no change in the dissolution rate and the X-ray diffraction pattern showed slight enhancement in crystallinity.     

Enhanced solubility of piperine using hydrophilic carrier-based potent solid dispersion systems

Context: Piperine alkaloid, an important constituent of black pepper, exhibits numerous therapeutic properties, whereas its usage as a drug is limited due to its poor solubility in aqueous medium, which leads to poor bioavailability.

Objective: Herein, a new method has been developed to improve the solubility of this drug based on the development of solid dispersions with improved dissolution rate using hydrophilic carriers such as sorbitol (Sor), polyethylene glycol (PEG) and polyvinyl pyrrolidone K30 (PVP) by solvent method. Physical mixtures of piperine and carriers were also prepared for comparison.

Methods: The physicochemical properties of the prepared solid dispersions were examined using SEM, TEM, DSC, XRD and FT-IR. In vitro dissolution profile of the solid dispersions was recorded and compared with that of the pure piperine and physical mixtures. The effect of these carriers on the aqueous solubility of piperine has been investigated.

Results: The solid dispersions of piperine with Sor, PEG and PVP exhibited superior performance for the dissolution of piperine with a drug release of 70%, 76% and 89%, respectively after 2?h compared to physical mixtures and pure piperine, which could be due to its transformation from crystalline to amorphous form as well as the attachment of hydrophilic carriers to the surface of poorly water-soluble piperine.

Conclusion: Results suggest that the piperine solid dispersions prepared with improved in vitro release exhibit potential advantage in delivering poorly water-soluble piperine as an oral supplement.     

The Release Rate of Indomethacin from Solid Dispersions with Eudragite

Abstract

The coprecipitates were prepared by a solvent technique using Eudragit E as carrier and indomethacin as a model drug.

X-Ray diffractometry, differential scanning calorimetry (DSC) and wettability tests were employed to investigate the physical state of the studied formulations. Up to 50% of indomethacin can be dispersed in an amorphous state in Eudragit E.

The influence of the pH on the in vitro release of solid dispersions has been evaluated. Because of the good solubility of Eudragit E at pH 1.2 a fast dissolution rate of the drug was observed while a marked delay was noticed at pH 7.5 where the polymer is only permeable to water. At pH 5.8 the kinetics of drug release can be modulated by the drug/polymer ratio. The dissolution rate of the drug can be increased by decreasing its amount in the coevaporate.     

Properties of Solid Dispersions of Naproxen in Various Polyethylene Glycols

Abstract

Solid dispersions of naproxen in polyethylene glycol 4000, 6000, and 20000, aimed at improving the drug dissolution characteristics, were prepared by both the solvent and melting methods. The drug-polymer interaction in the solid state was investigated using differential scanning calorimetry, hot-stage microscopy, Fourier-transform infrared spectroscopy, and x-ray diffraction analysis. Interaction in solution was studied by phase solubility analysis and dissolution experiments. Computer-aided molecular modeling was used to supplement the results from phase solubility studies. No important chemical interaction was found between naproxen and polyethylene glycol, either in solution or in the solid state, apart from the formation of weak drug-polymer hydrogen bonds. The increase of naproxen dissolution rate from its binary systems with polyethylene glycol could be attributed to several factors such as improved wettability, local solubilization, and drug particle size reduction. No influence of polymer molecular weight or of the solid dispersion preparation method on drug dissolution properties was found.     

Preparation,Characterization, and Dissolution Studies of Ibuprofen Solid Dispersions Using Polyethylene Glycol (PEG), Talc,and PEG-Talc as Dispersion Carriers

Abstract

Solid dispersions of ibuprofen (IBF) were prepared by solvent evaporation method using polyethylene glycol 10000 (PEG), talc, and PEG-talc as dispersion carriers. The drug-carrier(s) interactions in the solid state were investigated using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and x-ray diffraction analysis. Interactions in the solution were studied by performing dissolution experiments. No important and well-defined chemical interaction was found between the ingredients. The increase in the IBF dissolution rate from the solid dispersions with the carriers used in this study could be attributed to several factors such as improved wettability, local solubilization, and drug particle size reduction.     

Evaluation of Solid Dispersions of Clofazimine

ABSTRACT

Clofazimine (CLF) was formulated with polyethylene glycol (PEG) and polyvinyl pyrrolidone (PVP) as a solid solid dispersion (SSD) to increase the aqueous solubility and dissolution rate of the drug. Different molecular weights of PEG (1500, 4000, 6000, and 9000 Da) and PVP (14,000 and 44,000 Da) were used in different drug:carrier weight ratios (1:1, 1:5, and 1:9) and their effect on the dissolution performance of the drug was evaluated in USP Type 2 apparatus using 0.1 N HCl medium. The dissolution rate was compared with corresponding physical mixtures, a currently marketed soft gelatin capsule product, and free CLF. The effect of different methods of preparation (solvent/melt) on the dissolution rate of CLF was evaluated for PEG solid dispersions. Saturation solubility and phase solubility studies were carried out to indicate drug:carrier interactions in liquid state. Infrared (IR) spectroscopy and X-ray diffraction (XRD) were used to indicate drug:carrier interactions in solid state. Improvement in the drug dissolution rate was observed in solid dispersion formulations as compared to the physical mixtures. The dissolution rate improved with the decreasing weight fraction of the drug in the formulation. Polyvinyl pyrrolidone solid dispersion systems gave a better drug release profile as compared to the corresponding PEG solid dispersions. The effect of molecular weight of the PEG polymers did not follow a definite trend, while PVP 14,000 gave a better dissolution profile as compared to PVP 44,000. Improvement in saturation solubility of the drug in the solid dispersion systems was noted in all cases. Further, IR spectroscopy indicated drug:carrier interactions in solid state in one case and XRD indicated reduction in the crystallinity of CLF in another. It was concluded that solid-dispersion formulations of Clofazimine can be used to design a solid dosage form of the drug, which would have significant advantages over the currently marketed soft gelatin capsule dosage form.     

Controlled-Release Matrix of Acetaminophen-Ethylcellulose Solid Dispersion

Abstract

In this study ethylcellulose was evaluated as a carrier for preparation of prolonged release acetaminophen tablets. Solid dispersions containing three levels of ethylcellulose and acetaminophen (1:3; 1:1; 3:1) were prepared by the solvent method. Also physical mixtures at the same level of ethylcellulose and acetaminophen were prepared. Systems composed of solid dispersion or physical mixture containing the equivalent weight of 50 mg acetaminophen, Lactose fast-flo as diluent and 1% magnesium stearate as lubricant were compressed into tablets and tested for dissolution. The dissolution data showed that the drug release decreased as the level of ethylcellulose increased in the solid dispersion formulations. The drug release from tablets prepared with solid dispersion followed the diffusion controlled model for inert porous matrix, while the drug release from tablets prepared with physical mixture followed the first-order kinetic model.     

Mechanisms of Dissolution of Fast Release Solid Dispersions

Abstract

Drug dissolution from a solid dispersion is dependent on the technology employed to prepare the dispersion and on the proportion and properties of the carrier used. The diffusion models describing dissolution from multi-component solids seem to adequately describe drug release from non-disintegrating systems in the weight fraction range where the drug phase is expected to control dissolution. When solid dispersions have higher dissolution rates than corresponding mechanical mixtures, solid state changes during the formation of the dispersion are indicated. These increases in rate may result from the formation of higher energy phases of either component or from interactions between the components. The carrier may play an important role in the formation of these phases and in stabilizing them during subsequent dissolution. When a large relative solubility difference exists between the carrier and the drug, deviations from theory can be expected to occur at high carrier weight fractions. The model fails because insufficient drug phase is present to form a viable surface drug layer. Drug release then becomes controlled by dissolution of the carrier. In polymer based systems the presence of drug retards dissolution of the carrier, possibly through effects on binding and polymer swelling. These effects need to be quantified in order to allow prediction of drug release from high carrier weight fraction systems.     

The Influence of Various Dispersion Methods on the Rate of Dissolution of Sulfabenzamide

Abstract

The solvent and melt methods were employed to prepare solid dispersions with various water soluble carriers and a slightly soluble drug, sulfabenzamide. The carriers investigated included citric acid, succinic acid, dextrose, polyethylene glycol 6000, mannitol and urea. Dispersions with dextrose were superior to other carriers in releasing the drug into solution. Melts with both dextrose and urea produced faster rates of dissolution of sulfabenzamide than the coprecipitates from the solvent method. With mannitol and polyethylene glycol 6000, the coprecipitates produced a faster rate of dissolution of the drug than the melt dispersions.     

The Kinetics of Drug Release from Ethylcellulose Solid Dispersions

Abstract

Sulphadiazine - ethylcellulose (EC) solid dispersions with different drug: carrier ratios were prepared and fractionated. In vitro drug release followed an apparent zero-order kinetics rate constant being dependent on the thickness of the coat which was the rate controlling step in the process. Drug release was found to increase as the granule size was decreased. The amount of drug released was found to be pH dependent thus showing the existence of pores in the coat surrounding the drug particles. Inclusion of polyethylene glycol or sodium lauryl sulphate in the coat material or dissolution medium resulted in increased dissolution, an effect which was attributed to increase in porosity, reduction of interfacial tension and increase in wettability which was associated with the presence of these compounds.     

Evaluation of Ethylcellulose as A Matrix for Prolonged Release Formulations. I. Water Soluble Drugs: Acetaminophen and Theophylline

Abstract

In this study ethylcellulose was evaluated as a carrier for the preparation of prolonged release solid dispersions of relatively water soluble drugs, acetaminophen and theophylline. The solid dispersions containing various concentrations (7.5, 15.0 and 30.0 % by weight of drug) of ethylcellulose of different viscosity grades (21, 95, 209 and 350 cps) were prepared by the solvent method. The concentration of polymer in the formulation was the determining factor in controlling release rate of the drug, as the results indicate prolongation in release of the drug with increase in amount of ethylcellulose. The higher the viscosity grade of ethylcellulose, slower the release of drug from the solid dispersions. The release of drug from the tablets was more prolonged compared to the granular solid dispersions. In vitro release of acetaminophen and theophylline was more or less similar in both dissolution media. The viscosity grade of ethylcellulose showed slight influence on the release rate of drug from the tablet formulations, while it was quite noticeable in granular solid dispersions.     

Chemometric Modelling of Dissolution Rates of Griseofulvin From Solid Dispersions With Polymers

Abstract

The quantitative relationship between the release rate of griseofulvin and the chemical and physical properties of a series of polymers, used for the preparations of solid dispersions, was investigated by the application of multiple regression analysis (MRA), partial least square analysis (PLS) and a new non linear chemometric procedure called CARSO (Computer Aided Response Surface Optimization).

It was confirmed that the degree of crystallinity of griseofulvin and the wettability of the powder samples are important in the dissolution mechanism and in the prediction of dissolution profiles of griseofulvin from these solid dispersions.     

Dissolution Rates of Carbamazepine and Nitrazepam Utilizing Sugar Solid Dispersion System

Abstract

The dissolution of carbamazepine and nitrazepam from Its solid dispersions using anhydrous lactose, mannitol, galactose, PEG 6000 and coprecipitate using polyvinylpyrrolidone (PVP) 40,000 was investigated. The dissolution process of capsules containing either carbamazepine or nitrazepam as solid dispersion or coprecipitate followed an apparent first order process. The combination of carbamazepine with sugars (mannitol, lactose, and galactose) caused, in every case, an increase in the dissolution rate of the drug. Carbamazepine-PVP coprecipitate gave the higher dissolution rate than that of the solid dispersions with sugars and PEG 6000. Nitrazepam-lactose system gave higher dissolution rate than the other dispersions and coprecipitate. This enhancement in dissolution rate was much more obvious for the solid dispersions and coprecipitate than for the physical mixtures.     

Preparation of the Disperse Systems of Sulfathiazole-Polyvinylpyhrolidone by Mechanical Activation

Abstract

The potential value of solid-state dispersions of insoluble drugs in water-soluble matrices is known to bring about enhancement of solubility, dissolution rate and bioavailability of the drugs. The conventional methods of preparation of solid dispersions such as fusion or solvent technique are somewhat limited. The method of mechanical activation analogous to that which is employed in the mechanical alloying method may be used in preparation of dispersions of organic solids. In this paper, the method of mechanical activation is applied to obtain a solid-state dispersion of sulfathiazole in polyvinylpyrrolidone. The mechanical treatment of sulfathiazole with polyvinylpyrrolidone in a planetary ball mill transfers crystalline drug into amorphous state, the process being accompanied by formation of hydrogen bonds of sulfathiazole with matrice. The apparent solubility and rate of solvation of sulfathiazole were greatly increased if it was previously mechanically treated with polyvinyl -pyrrolidone. The release of sulfathiazole from solid dispersions with polymer to drug ratio of 1:3, 1:1, 3:1 was examined, a polymer to drug ratio of 3:1 gave the highest solubility.     

Carbamazepine/βCD/HPMC Solid Dispersions. I. Influence of the Spray-Drying Process and βCD/HPMC on the Drug Dissolution Profile

Abstract

The aim of this study was to compare carbamazepine (CBZ) solid dispersions prepared by spray-drying of aqueous dispersions with the corresponding physical mixtures. The influence of the association of β-cyclodextrin (βCD) and hydroxypropyl methylcellulose (HPMC) on the CBZ dissolution profile of the preparations was investigated. Results demonstrated that CBZ release from solid dispersions is dependent on the ratio of βCD and HPMC. The spray-drying process confers better homogeneity to CBZ polymeric dispersions than the physical mixture process. In summary, we demonstrated the feasibility of obtaining a homogeneous polymeric solid dispersion of CBZ from an aqueous media by spray-drying and a clear influence of the βCD:HPMC ratio on the release profile of CBZ.     

In Vitro and Invivo Evaluation of Some Fast Release Dosage Forms of Hydrochlorothiazide

Abstract

The utilization of ternary sugar solid dispersion and solvent deposition systems for increasing the dissolution rate of hydrochlorothiazide (hot) were investigated. The dispersion systems were prepared by the fusion method using various combinations of mannitol and sorbitol, and urea and polyethylene glycol 4000 (peg 4000) were used for comparison. An 1:2 mixture of sorbitol-mannitol was found to be an excellent carrier. The dissolution rate of this sample was closely comparable to that of hot-peg 4000 solid dispersions. Drug-urea eutectic mixtures were inferior to both the sugar and polymer dispersions. Solvent deposition systems of hot with microfine cellulose and potato starch gave higher dissolution rates at the initial sampling times. It is proposed that solid dispersion systems of this drug may prove to be valuable. Tablets fabricated from fast-release hot granules showed better in vivo results than a marketed tablet. A linear relationship was observed between in vitro-in vivo data of some of the products.     

Dissolution Rate Study of Fresh and Aging Triamterene-Urea Solid Dispersions

Triamterene-urea solid dispersions of varying weight fractions were elaborated by the melting carrier method and their dissolution profiles compared with the pure drug and physical mixtures. The dissolution rates of triamterene from solid dispersions were faster than the pure drug and physical mixtures.

Solubility studies revealed a linear increase in the solubility of the triamterene with the increase of urea concentration.

The intrinsic dissolution rates, determined by the rotating disc method, showed linear dissolution profiles in spite of that the scanning electron microscopy examination revealed that the surfaces do not maintain constant during the dissolution process.

Aging of the different preparations for one year at room temperature does not induced significant changes in their dissolution profiles.     

Part II: Bioavailability in Beagle Dogs of Nimodipine Solid Dispersions Prepared by Hot-Melt Extrusion

ABSTRACT

The aim of the present work was to investigate the in vitro dissolution properties and oral bioavailability of three solid dispersions of nimodipine. The solid dispersions were compared with pure nimodipine, their physical mixtures, and the marketed drug product Nimotop®. Nimodipine solid dispersions were prepared by a hot-melt extrusion process with hydroxypropyl methylcellulose (HPMC, Methocel E5), polyvinylpyrrolidone/vinyl acetate copolymer (PVP/VA, Plasdone S630®), and ethyl acrylate, methyl methacrylate polymer (Eudragit® EPO). Previous studies of XRPD and DSC data showed that the crystallinity was not observed in hot-melt extrudates, two T_gs were observed in the 30% and 50% NMD-HPMC samples, indicating phase separation. The weakening and shift of the N–H stretching vibration of the secondary amine groups of nimodipine as determined by FT-IR proved hydrogen bonding between the drug and polymers in the solid dispersion. The dissolution profiles of the three dispersion systems showed that the release was improved compared with the unmanipulated drug. Drug plasma concentrations were determined by HPLC, and pharmacokinetic parameters were calculated after orally administering each preparation containing 60 mg of nimodipine. The mean bioavailability of nimodipine was comparable after administration of the Eudragit® EPO solid dispersion and Nimotop®, but the HPMC and PVP/VA dispersions exhibited much lower bioavailability. However, the AUC_{0–12 hr} values of all three solid dispersions were significantly higher than physical mixtures with the same carriers and nimodipine powder.     

Miconazole and Miconazolenitrate Chewing Gun as Drug Delivery Systems – A Practical Application of Solid Dispersion Technique

Abstract

Miconazole and miconazolenitrate are antifungal drugs with poor solubilities in water and saliva. The low solubilities meant that only small amounts of the drugs – incorporated by a conventional method in chewing gum-were released during mastication. The experiments were performed on a mastication device.

In this study it was shown that application of a 20% miconazole – 80% polyethyleneglycol 6000 solid dispersion drastically improved the in vitro release of miconazole from cheving gum, when a medium similar to saliva was used. In addition to polyethyleneglycol 6000, polyvinylpyrrolidone 40000, xylitol and urea were tested as carriers. It was also shown that the release rate of miconazole from chewing gum was much greater than the release rate of miconazolenitrate.

No certain correlation could be shown between the dissolution rates of the solid dispersions measured by a stirring paddle method and the release rates of miconazole from solid dispersions in chewing gum.

The solid dispersion systems were characterized by differential scanning calorimetry. The systems containing polyethyleneglycol 6000 and xylitol were eutectic. Polyvinylpyrrolidone 40000 prevented crystallisation of miconazole when the percentage of drug in the solid dispersion was less than 50%.