In vitro and in vivo studies on a novel solid dispersion of repaglinide using polyvinylpyrrolidone as the carrier

In order to improve the dissolution and absorption of the water insoluble drug repaglinide, a solid dispersion was developed by solvent method using polyvinylpyrrolidone K30 (PVP K30) as the hydrophilic carrier for the first time. Studies indicated that both solubility and the dissolution rate of repaglinide were significantly increased in the solid dispersion system compared with that of repaglinide raw material or physical mixtures. The repaglinide solid dispersions with PVP K30 solid state was characterized by polarizing microscopy, differential scanning calorimetry (DSC), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). DSC and XRD studies indicated that repaglinide existed in an amorphous form in the solid dispersion. FT-IR analysis demonstrated the presence of intermolecular hydrogen bonding between repaglinide and PVP K30 in the solid dispersion. In the in situ gastrointestinal perfusion experiment, solid dispersion was shown to remarkably enhance the absorption of repaglinide in stomach and all segments of intestine. In vivo pharmacokinetic study in rats showed that immediate and complete release of repaglinide from the solid dispersion resulted in rapid absorption that significantly increased the bioavailability and the maximum plasma concentration over repaglinide raw material. These results demonstrated PVP K30 was an appropriate carrier for solid dispersion of repaglinide, with increased dissolution and oral absorption.     

Characteristics of Bicalutamide Solid Dispersions and Improvement of the Dissolution

ABSTRACT

The purpose of our study was to formulate and evaluate bicalutamide (BL) solid dispersions (SD). The physicochemical properties were evaluated by differential scanning calorimetry (DSC), Fourier-Transform infrared (FT-IR) spectroscopy, Powder X-ray diffractometry (PXRD), dissolution studies, and stability studies. The dissolution studies demonstrated that the dissolution of BL from BL-SD increased with an increase in carrier content (PVP K30). X-ray assays and DSC results both confirmed the amorphous state of BL in BL-SD. Stability studies conducted after 6 months showed that BL exhibited excellent stability in the solid dispersion of PVP K30 (1:5).     

Characteristics of bicalutamide solid dispersions and improvement of the dissolution

The purpose of our study was to formulate and evaluate bicalutamide (BL) solid dispersions (SD). The physicochemical properties were evaluated by differential scanning calorimetry (DSC), Fourier-Transform infrared (FT-IR) spectroscopy, Powder X-ray diffractometry (PXRD), dissolution studies, and stability studies. The dissolution studies demonstrated that the dissolution of BL from BL-SD increased with an increase in carrier content (PVP K30). X-ray assays and DSC results both confirmed the amorphous state of BL in BL-SD. Stability studies conducted after 6 months showed that BL exhibited excellent stability in the solid dispersion of PVP K30 (1:5).     

Solid Carriers for Improved Solubility of Glipizide in Osmotically Controlled Oral Drug Delivery System

The purpose of this study was to increase the solubility of glipizide (gli) by solid dispersions SDs technique with polyvinylpyrrolidone (PVP) in aqueous media. The gli–PVP solid dispersion systems was prepared by physical mixing or spray drying method, and characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD) analysis, Fourier transformation-infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The elementary osmotic pumps (EOPs) were prepared with gli–PVP complex and the effect of the PVP percentages on the enhancing of gli dissolution rate was studied. The influences of various parameters e.g., drug- PVP ratio, level of solubility modifier, coating weight gain and diameter of drug releasing orifice on drug release profiles were also investigated. The solubility and dissolution rates of gli were significantly increased by solid dispersion using spray dried method as well as their physical mixture. The obtained results indicated that gli–PVP solid dispersion system has suitable solubility behavior in EOP tablets.     

Solid carriers for improved solubility of glipizide in osmotically controlled oral drug delivery system

The purpose of this study was to increase the solubility of glipizide (gli) by solid dispersions SDs technique with polyvinylpyrrolidone (PVP) in aqueous media. The gli-PVP solid dispersion systems was prepared by physical mixing or spray drying method, and characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD) analysis, Fourier transformation-infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The elementary osmotic pumps (EOPs) were prepared with gli-PVP complex and the effect of the PVP percentages on the enhancing of gli dissolution rate was studied. The influences of various parameters e.g., drug- PVP ratio, level of solubility modifier, coating weight gain and diameter of drug releasing orifice on drug release profiles were also investigated. The solubility and dissolution rates of gli were significantly increased by solid dispersion using spray dried method as well as their physical mixture. The obtained results indicated that gli-PVP solid dispersion system has suitable solubility behavior in EOP tablets.     

Preparation and Characterization of Solid Dispersions of Dipyridamole with a Carrier “Copolyvidonum Plasdone®S-630”

Solid dispersions (SDs) of dipyridamole (DIP) with a novel carrier copolyvidonum Plasdone®S-630 (CoPVP) were developed by solvent evaporation method. The solid state of SDs of DIP with CoPVP (SDs CoPVP) was characterized by fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and polarizing microscopy, compared with that of SDs of DIP with polyvinylpyrrolidone Plasdone®K-29/32 (SDs PVP). FT-IR analysis demonstrated the presence of intermolecular hydrogen bonding between DIP and CoPVP or PVP in SDs. DSC and XRD studies indicated that DIP presented in amorphous state in both SDs CoPVP and SDs PVP at higher weight ratios. The dissolution property of SDs CoPVP was significantly improved in comparison of pure DIP and physical mixtures with CoPVP (PM CoPVP). Both SDs CoPVP and SDs PVP powder showed the favorable flowability. However, SDs CoPVP showed better compressibility than SDs PVP. The lower hydroscopicity of SDs CoPVP could be advantageous to the stability to SDs. This study proves the potential of CoPVP as a carrier in the formulations of SDs for poorly soluble drugs.     

Preparation and characterization of solid dispersions of dipyridamole with a carrier "copolyvidonum Plasdone S-630"

Solid dispersions (SDs) of dipyridamole (DIP) with a novel carrier copolyvidonum Plasdone®S-630 (CoPVP) were developed by solvent evaporation method. The solid state of SDs of DIP with CoPVP (SDs CoPVP) was characterized by fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and polarizing microscopy, compared with that of SDs of DIP with polyvinylpyrrolidone Plasdone®K-29/32 (SDs PVP). FT-IR analysis demonstrated the presence of intermolecular hydrogen bonding between DIP and CoPVP or PVP in SDs. DSC and XRD studies indicated that DIP presented in amorphous state in both SDs CoPVP and SDs PVP at higher weight ratios. The dissolution property of SDs CoPVP was significantly improved in comparison of pure DIP and physical mixtures with CoPVP (PM CoPVP). Both SDs CoPVP and SDs PVP powder showed the favorable flowability. However, SDs CoPVP showed better compressibility than SDs PVP. The lower hydroscopicity of SDs CoPVP could be advantageous to the stability to SDs. This study proves the potential of CoPVP as a carrier in the formulations of SDs for poorly soluble drugs.     

Evaluation of solid dispersions of Clofazimine

Clofazimine (CLF) was formulated with polyethylene glycol (PEG) and polyvinyl pyrrolidone (PVP) as a solid solid dispersion (SSD) to increase the aqueous solubility and dissolution rate of the drug. Different molecular weights of PEG (1500, 4000, 6000, and 9000 Da) and PVP (14,000 and 44,000 Da) were used in different drug:carrier weight ratios (1:1, 1:5, and 1:9) and their effect on the dissolution performance of the drug was evaluated in USP Type 2 apparatus using 0.1 N HCl medium. The dissolution rate was compared with corresponding physical mixtures, a currently marketed soft gelatin capsule product, and free CLF. The effect of different methods of preparation (solvent/melt) on the dissolution rate of CLF was evaluated for PEG solid dispersions. Saturation solubility and phase solubility studies were carried out to indicate drug:carrier interactions in liquid state. Infrared (IR) spectroscopy and X-ray diffraction (XRD) were used to indicate drug:carrier interactions in solid state. Improvement in the drug dissolution rate was observed in solid dispersion formulations as compared to the physical mixtures. The dissolution rate improved with the decreasing weight fraction of the drug in the formulation. Polyvinyl pyrrolidone solid dispersion systems gave a better drug release profile as compared to the corresponding PEG solid dispersions. The effect of molecular weight of the PEG polymers did not follow a definite trend, while PVP 14,000 gave a better dissolution profile as compared to PVP 44,000. Improvement in saturation solubility of the drug in the solid dispersion systems was noted in all cases. Further, IR spectroscopy indicated drug:carrier interactions in solid state in one case and XRD indicated reduction in the crystallinity of CLF in another. It was concluded that solid-dispersion formulations of Clofazimine can be used to design a solid dosage form of the drug, which would have significant advantages over the currently marketed soft gelatin capsule dosage form.     

Evaluation of Solid Dispersions of Clofazimine

ABSTRACT

Clofazimine (CLF) was formulated with polyethylene glycol (PEG) and polyvinyl pyrrolidone (PVP) as a solid solid dispersion (SSD) to increase the aqueous solubility and dissolution rate of the drug. Different molecular weights of PEG (1500, 4000, 6000, and 9000 Da) and PVP (14,000 and 44,000 Da) were used in different drug:carrier weight ratios (1:1, 1:5, and 1:9) and their effect on the dissolution performance of the drug was evaluated in USP Type 2 apparatus using 0.1 N HCl medium. The dissolution rate was compared with corresponding physical mixtures, a currently marketed soft gelatin capsule product, and free CLF. The effect of different methods of preparation (solvent/melt) on the dissolution rate of CLF was evaluated for PEG solid dispersions. Saturation solubility and phase solubility studies were carried out to indicate drug:carrier interactions in liquid state. Infrared (IR) spectroscopy and X-ray diffraction (XRD) were used to indicate drug:carrier interactions in solid state. Improvement in the drug dissolution rate was observed in solid dispersion formulations as compared to the physical mixtures. The dissolution rate improved with the decreasing weight fraction of the drug in the formulation. Polyvinyl pyrrolidone solid dispersion systems gave a better drug release profile as compared to the corresponding PEG solid dispersions. The effect of molecular weight of the PEG polymers did not follow a definite trend, while PVP 14,000 gave a better dissolution profile as compared to PVP 44,000. Improvement in saturation solubility of the drug in the solid dispersion systems was noted in all cases. Further, IR spectroscopy indicated drug:carrier interactions in solid state in one case and XRD indicated reduction in the crystallinity of CLF in another. It was concluded that solid-dispersion formulations of Clofazimine can be used to design a solid dosage form of the drug, which would have significant advantages over the currently marketed soft gelatin capsule dosage form.     

Preparation, characterization and in vitro evaluation of solid dispersions containing docetaxel

Solid dispersions using water-soluble carriers were studied for improving the dissolution of docetaxel, a poorly soluble compound. In order to obtain the most optimized formulation, we prepared many solid dispersions with different carriers, different solvents, or at a series of drug-to-carrier ratios, and compared their dissolution. The accumulative dissolution of docetaxel from poloxamer 188 was more excellent than that from PVP(k30) and glyceryl monostearate, and the dissolution of docetaxel from solid dispersion was markedly higher than that of pure docetaxel; meanwhile the increased dissolution was partly dependent on the ratios of docetaxel and poloxamer 188. The ethanol used to prepare solid dispersion is of more significant effect on the dissolution of docetaxel than that of acetone. The docetaxel/poloxamer 188 system was characterized by differential scanning calorimetry (DSC), X-ray diffractometry (XRD), and environmental scanning electron microscope (ESEM). The results of DSC, XRD, and ESEM analyses of docetaxel/poloxamer 188 system showed that there are intermolecular interactions between docetaxel and poloxamer, and the crystallinity of docetaxel disappeared. These results show that solid dispersion is a promising approach of developing docetaxel drug formulates.     

Part I: characterization of solid dispersions of nimodipine prepared by hot-melt extrusion

The purpose of this study was to prepare and characterize solid dispersions of nimodipine with hydroxypropyl methylcellulose (HPMC, Methocel E5), polyvinylpyrrolidone/vinyl acetate copolymer (PVP/VA, Plasdone S630^®), and ethyl acrylate, methyl methacrylate polymer (Eudragit^® EPO). The goal was to investigate whether the solid dispersion prepared by hot-melt extrusion can improve the dissolution rate of nimodipine. The dissolution results indicated that three polymers are suitable carriers to enhance the in vitro dissolution rate of nimodipine in pH 4.5 medium. The solubility research and solubility parameters calculation was corresponded with dissolution data. XRPD and DSC data showed that the crystallinity was not observed in hot-melt extrudates. NMD acted as a plasticizer for PVP/VA and EPO and was miscible with the polymers as well as 10% NMD-HPMC systems, because a single T_g was observed in these extrudates. However, two T_gs were observed in the 30 and 50% NMD-HPMC samples, indicating phase separation. The weakening and shift of the N-H stretching vibration of the secondary amine groups of nimodipine as determined by FT-IR proved hydrogen bonding between the drug and polymers in the solid dispersion.     

Enhanced dissolution and bioavailability of grapefruit flavonoid Naringenin by solid dispersion utilizing fourth generation carrier

Context: Naringenin (NRG), the aglycone flavonoid present in grapefruits, possesses anti-inflammatory, anti-carcinogenic, anti-lipid peroxidation and hepato-protective effects. However, it is poorly soluble in water and exhibits slow dissolution after oral ingestion, thus restricting its therapeutic efficacy.

Objective: With the aim to enhance the dissolution rate and oral bioavailability of NRG, solid dispersion technique has been applied using Soluplus® as carrier.

Methods: Solid dispersions of NRG were prepared by solvent evaporation and kneading methods using various ratios (1:4, 3:7, 2:3 and 1:1) of NRG:Carrier. Characterization of the optimized formulations was performed using Fourier transform infrared spectroscopy, differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis. The in vivo behavior of the optimized formulations was also investigated in Wistar Albino rats.

Results: NRG solid dispersion showed a significantly higher solubility and drug dissolution rate than pure NRG (p?Conclusion: Based on these results, it was concluded that solid dispersion technique markedly enhances the in vitro drug release and in vivo behavior of the grapefruit flavonoid NRG.     

Effect of polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol graft copolymer on bioadhesion and release rate property of eplerenone pellets

Abstract

The present study involved the design and development of oral bioadhesive pellets of eplerenone. A solid dispersion of eplerenone was developed with a hydrophilic carrier, polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol graft copolymer (Soluplus^®). Bioadhesive pellets were prepared from this solid dispersion using a combination of HPMC K4M and Carbopol 934P. Both the solid dispersion and the pellets were evaluated for various physicochemical properties such as solubility, entrapment efficiency, drug content, surface morphology, mucoadhesion and swelling behavior. Analysis carried out using FT-IR, DSC and XRD found no interaction between the eplerenone and excipients. The solid dispersion had irregular-shaped smooth-surfaced particles of diameter 265?±?105.5?μm. In TEM analysis, eplerenone particles of size 79–120?nm were found. The solubility and dissolution of eplerenone in the Soluplus^®-based solid dispersion were 5.26 and 2.50 times greater, respectively. Investigation of the swelling behavior of the pellets showed that the thickness of the gel layer increased continuously over the duration of the study. Moreover, a correlation was observed between the thickness and strength of the gel layer and the percentage release. The mechanism of drug release was found to be non-Fickian (anomalous), with the release kinetics approaching first-order kinetics. The bioavailability of the eplerenone bioadhesive pellet formulation was studied using Wistar rats and was found to be improved. An in vivo mucoadhesion study showed that the pellets are retained for 24?h in rabbits. It was concluded that Soluplus^® had a positive effect on the solubility and dissolution of pellets without affecting the bioadhesion.     

Enhancement of the Dissolution and Permeation Rates of Meloxicam by Formation of Its Freeze-dried Solid Dispersions in Polyvinylpyrrolidone K-30

ABSTRACT

Freeze-drying (FD) and solvent evaporation (SE) were used to prepare solid dispersions (SDs) of meloxicam (MX) in polyvinylpyrrolidone K-30 (PVP). The SDs were prepared at different ratios, namely 1:1, 1:3, and 1:5 MX:PVP weight ratio. Differential scanning calorimetry (DSC), infrared absorption spectroscopy (IR), and x-ray powder diffractometry (XPD) were utilized to characterize the physicochemical properties of the SDs. Meloxicam (MX) in the solid dispersions appeared with less crystallinity form and was present in a complete amorphous form at higher PVP ratio. Dissolution rates of MX as a pure drug, physical mixtures (PMs), and SDs indicated a marked increase of the dissolution rate of MX in presence of PVP. The increase in the dissolution rate was dependent on the ratio of PVP and the method of preparation. In addition, the permeability of the drug through standard cellophane membrane and hairless mouse skin was also evaluated. The permeation rate of MX was significantly increased in the case of SDs and was dependent on the ratio of PVP. The results were primarily due to increase wettability, the solubilization of the drug by the carrier, and formation of MX amorphous form.     

Enhancement of the dissolution and permeation rates of meloxicam by formation of its freeze-dried solid dispersions in polyvinylpyrrolidone K-30

Freeze-drying (FD) and solvent evaporation (SE) were used to prepare solid dispersions (SDs) of meloxicam (MX) in polyvinylpyrrolidone K-30 (PVP). The SDs were prepared at different ratios, namely 1:1, 1:3, and 1:5 MX:PVP weight ratio. Differential scanning calorimetry (DSC), infrared absorption spectroscopy (IR), and x-ray powder diffractometry (XPD) were utilized to characterize the physicochemical properties of the SDs. Meloxicam (MX) in the solid dispersions appeared with less crystallinity form and was present in a complete amorphous form at higher PVP ratio. Dissolution rates of MX as a pure drug, physical mixtures (PMs), and SDs indicated a marked increase of the dissolution rate of MX in presence of PVP. The increase in the dissolution rate was dependent on the ratio of PVP and the method of preparation. In addition, the permeability of the drug through standard cellophane membrane and hairless mouse skin was also evaluated. The permeation rate of MX was significantly increased in the case of SDs and was dependent on the ratio of PVP. The results were primarily due to increase wettability, the solubilization of the drug by the carrier, and formation of MX amorphous form.     

Enhanced solubility of piperine using hydrophilic carrier-based potent solid dispersion systems

Context: Piperine alkaloid, an important constituent of black pepper, exhibits numerous therapeutic properties, whereas its usage as a drug is limited due to its poor solubility in aqueous medium, which leads to poor bioavailability.

Objective: Herein, a new method has been developed to improve the solubility of this drug based on the development of solid dispersions with improved dissolution rate using hydrophilic carriers such as sorbitol (Sor), polyethylene glycol (PEG) and polyvinyl pyrrolidone K30 (PVP) by solvent method. Physical mixtures of piperine and carriers were also prepared for comparison.

Methods: The physicochemical properties of the prepared solid dispersions were examined using SEM, TEM, DSC, XRD and FT-IR. In vitro dissolution profile of the solid dispersions was recorded and compared with that of the pure piperine and physical mixtures. The effect of these carriers on the aqueous solubility of piperine has been investigated.

Results: The solid dispersions of piperine with Sor, PEG and PVP exhibited superior performance for the dissolution of piperine with a drug release of 70%, 76% and 89%, respectively after 2?h compared to physical mixtures and pure piperine, which could be due to its transformation from crystalline to amorphous form as well as the attachment of hydrophilic carriers to the surface of poorly water-soluble piperine.

Conclusion: Results suggest that the piperine solid dispersions prepared with improved in vitro release exhibit potential advantage in delivering poorly water-soluble piperine as an oral supplement.     

Part II: Bioavailability in Beagle Dogs of Nimodipine Solid Dispersions Prepared by Hot-Melt Extrusion

ABSTRACT

The aim of the present work was to investigate the in vitro dissolution properties and oral bioavailability of three solid dispersions of nimodipine. The solid dispersions were compared with pure nimodipine, their physical mixtures, and the marketed drug product Nimotop®. Nimodipine solid dispersions were prepared by a hot-melt extrusion process with hydroxypropyl methylcellulose (HPMC, Methocel E5), polyvinylpyrrolidone/vinyl acetate copolymer (PVP/VA, Plasdone S630®), and ethyl acrylate, methyl methacrylate polymer (Eudragit® EPO). Previous studies of XRPD and DSC data showed that the crystallinity was not observed in hot-melt extrudates, two T_gs were observed in the 30% and 50% NMD-HPMC samples, indicating phase separation. The weakening and shift of the N–H stretching vibration of the secondary amine groups of nimodipine as determined by FT-IR proved hydrogen bonding between the drug and polymers in the solid dispersion. The dissolution profiles of the three dispersion systems showed that the release was improved compared with the unmanipulated drug. Drug plasma concentrations were determined by HPLC, and pharmacokinetic parameters were calculated after orally administering each preparation containing 60 mg of nimodipine. The mean bioavailability of nimodipine was comparable after administration of the Eudragit® EPO solid dispersion and Nimotop®, but the HPMC and PVP/VA dispersions exhibited much lower bioavailability. However, the AUC_{0–12 hr} values of all three solid dispersions were significantly higher than physical mixtures with the same carriers and nimodipine powder.     

Preparation,Characterization and In Vitro Evaluation of Solid Dispersions Containing Docetaxel

Solid dispersions using water-soluble carriers were studied for improving the dissolution of docetaxel, a poorly soluble compound. In order to obtain the most optimized formulation, we prepared many solid dispersions with different carriers, different solvents, or at a series of drug-to-carrier ratios, and compared their dissolution. The accumulative dissolution of docetaxel from poloxamer 188 was more excellent than that from PVP_k30 and glyceryl monostearate, and the dissolution of docetaxel from solid dispersion was markedly higher than that of pure docetaxel; meanwhile the increased dissolution was partly dependent on the ratios of docetaxel and poloxamer 188. The ethanol used to prepare solid dispersion is of more significant effect on the dissolution of docetaxel than that of acetone. The docetaxel/poloxamer 188 system was characterized by differential scanning calorimetry (DSC), X-ray diffractometry (XRD), and environmental scanning electron microscope (ESEM). The results of DSC, XRD, and ESEM analyses of docetaxel/poloxamer 188 system showed that there are intermolecular interactions between docetaxel and poloxamer, and the crystallinity of docetaxel disappeared. These results show that solid dispersion is a promising approach of developing docetaxel drug formulates.     

Solid dispersions of diflunisal-PVP: polymorphic and amorphous states of the drug

Coprecipitates of diflunisal and polyvinylpyrrolidone (PVP K15, K30, and K90) and physical mixtures were studied using x-ray diffraction analysis, infrared (IR) spectroscopy, differential scanning calorimetry (DSC), and hot-stage microscopy. X-ray diffraction results revealed an almost amorphous state, even in coprecipitates with a high content of drug, next to 70%, which was independent of the polymer molecular weight. The IR spectra of 70:30 drug-PVP solid dispersions suggest the formation of diflunisal-PVP hydrogen bonds. For 70:30 drug-polymer ratio, the physical mixture showed linear dissolution kinetics of free crystals, but the corresponding coprecipitates exhibit two different dissolution processes. When the 25:75 drug-polymer dispersion is analyzed by hot-stage microscopy, only solid plates of PVP are observed; the absence of drug particles may be due to a molecular dispersion of the drug into the polymer. Moreover, polymorphic changes of diflunisal were detected in the solid dispersions in comparison with the corresponding physical mixtures, which are always formed by polymorph II. At high concentrations of drug (75:25 and 80:20), x-ray diffraction patterns of solid dispersions showed the partial recrystallization of the drug, displaying the main diffraction peaks of polymorph I when ethanol was used as coprecipitation solvent, whereas diflunisal form IV was obtained in chloroform.     

Preparation and physicochemical evaluation of a new tacrolimus tablet formulation for sublingual administration

The aim of this study was to develop a new fast-disintegrating tablet formulation containing 1?mg tacrolimus for sublingual application. First, solid dispersions containing tacrolimus (2.5%, 5% and 10% w/w) incorporated in Ac-Di-Sol(?) and carriers (inulin 1.8?kDa and 4?kDa, and polyvinylpyrrolidone (PVP) K30) were prepared by freeze drying. Subsequently, a tablet formulation composed of a mixture of the solid dispersions, Ac-Di-Sol(?), mannitol, Avicel(?) PH-101 and sodium stearyl fumarate was optimized concerning drug load in the solid dispersions and the type of carrier. Tablet weight was kept constant at 75?mg by adjusting the amount of Avicel(?) PH-101. Differential scanning calorimetry (DSC) and X-ray powder diffraction (XRPD) results indicated the absence of the drug in the crystalline state, which was confirmed by the scanning electron microscopy (SEM). These results suggest that tacrolimus incorporated in all of the solid dispersions was fully amorphous. Dissolution of the tablets containing solid dispersions with a low drug load highly depends on the type of carrier and increased in the order: PVP K30 < inulin 4?kDa < inulin 1.8?kDa. Solid dispersions with a drug load of 10% w/w incorporated in the carriers yielded optimal formulations. In addition, the physicochemical characteristics and the dissolution behavior of the tablet formulation containing inulin 1.8 kDa-based solid dispersions with a drug load of 10% w/w did not change after storage at 20°C/45%RH for 6 months indicating excellent storage stability.