Formulation and Release Kinetics of Sustained Release Phenylpropanolamine Hydrochloride Granules and Tablets

Abstract

Sustained release phenylpropanolamine hydrochloride (PPH) granules and tablets were prepared using HPMC, HPMC and SCMC, Eudragit RS, Eudragit RS+L or HPMC + Eudragit RS matrices. The release pattern of PPH from the prepared granules and tablets was found to be in the following order HPMC > HPMC + SCMC > RS > RS + 1> HPMC + RS. The results revealed that, although the drug concentration was kept constant in all the prepared granules and tablets, the drug release from these formulations was clearly different and depends mainly on the type of matrix used. The presence of Eudragit L with Eudragit RS and Eudragit RS with HPMC resulted in a marked decrease in the drug release compared with that obtained from the matrix containing HPMC or Eudragit RS alone. The release data of PPH from the prepared granules and tablets were treated mathematically according to zero order, first order, Langenbuchar, modified Langenbucher and Higuchi models. The results revealed that no one model was able adequately to describe the drug release profiles from these formulations. In-vivo studies in human volunteers showed that, the peak urinary excretion of PPH occurred over a sustained period from 2 to 6.5 hr in case of HPMC + SCMC tablets and from 2 to 10 hr in case of either RS+L or HPMC + RS tablets.     

A formulation approach for development of HPMC-based sustained release tablets for tolterodine tartrate with a low release variation

Objective: The purpose of this study was to develop hydroxypropylmethylcellulose (HPMC)-based sustained release (SR) tablets for tolterodine tartrate with a low drug release variation.

Methods: The SR tablets were prepared by formulating a combination of different grades of HPMC as the gelling agents. The comparative dissolution study for the HPMC-based SR tablet as a test and Detrusitol^® SR capsule as a reference was carried out, and the bioequivalence study of the two products was also conducted in human volunteers.

Results: The amount of HPMC, the grade of HPMC and the combination ratio of different grades of HPMC had remarkable effects on drug release from the SR tablets. Both the test and reference products had no significant difference in terms of comparative dissolution patterns in four different media (f₂ > 50). Furthermore, the dissolution method and rotation speed showed no effects on the drug release from the two products. The 90% confidence intervals of the AUC_0–36 and C_max ratios for the test and reference products were within the acceptable bioequivalence intervals of log0.8–log1.25.

Conclusions: A HPMC-based SR tablet for tolterodine tartrate with a low release variation was successfully developed, which was bioequivalent to Detrusitol^® SR capsule.     

Vitamin B12 buccoadhesive tablets: auspicious non-invasive substitute for intra muscular injection: formulation,in vitro and in vivo appraisal

Attempting to prepare a convenient bioavailable formulation of vitamin B₁₂ (cyanocobalamin), 17 tablet formulations were prepared by direct compression. Different concentrations of hydroxypropyl methyl cellulose (HPMC), carbopol 971p (CP971p), and chitosan (Cs) were used. The tablets were characterized for thickness, weight, drug content, hardness, friability, surface pH, in vitro drug release, and mucoadhesion. Kinetic analysis of the release data was conducted. Vitamin B₁₂ bioavailability from the optimized formulations was studied on rabbits by the aid of enzyme-linked immunosorbent assay. Neurotone^® I.M. injection was used for comparison. HPMC (F1-F4), CP971p (F5-F8), and HPMC/CP971p (F12-F15)-based formulations showed acceptable mechanical properties. The formulated tablets showed maximum swelling indices of 232?±?0.13. The surface pH values ranged from 5.3?±?0.03 to 6.6?±?0.02. Bioadhesive force ranged from 66?±?0.6 to 150?±?0.5?mN. Results showed that CP971p-based tablets had superior in vitro drug release, mechanical, and mucoadhesive properties. In vitro release date of selected formulations were fitted well to Peppas model. HPMC/CP971p-based formulations showed bioavailability up to 2.7-folds that of Neurotone^® I.M. injection.     

Development and comparative evaluation of in vitro,in vivo properties of novel controlled release compositions of paroxetine hydrochloride hemihydrate as against Geomatrix™ platform technology

The objective of this study is to develop, in vitro and in vivo evaluation of novel approaches for controlled release of paroxetine hydrochloride hemihydrate (PHH) in comparison to patented formulation PAXIL CR^® tablets of GlaxoSmithKline (Geomatrix? technology). In one of the approaches, hydrophilic core matrix tablets containing 85% of the dose were prepared and further coated with methacrylic acid copolymer to delay the release. An immediate release coating of 15% was given as top coat. The tablets were further optionally coated using ethyl cellulose. In the second approach, hydrophobic matrix core tablets containing metharylic acid copolymer were prepared. In the third approach, PHH was granulated with enteric polymer and further hydrophobic matrix core tablets were prepared. The effect of polymer concentration, level of enteric coating on drug release was evaluated by in vitro dissolution study by varying dissolution apparatus and the rotation speeds. It was found that increase in concentration of high viscosity hydroxypropylmethylcellulose (HPMC) resulted in reduction of the release rate. The drug release was observed to be dependent on the level of enteric coating and ethyl cellulose coating, being slower at increased coating. The release mechanism of PHH followed zero-order shifting to dissolution dependent by the increase of HPMC content. The formulation was stable without change in drug release rate. In vivo study in human volunteers confirmed the similarity between test and innovator formulations. In conclusion, HPMC-based matrix tablets, which were further coated using methacrylic acid copolymer, were found to be suitable for the formulation of single layer-controlled release PHH.     

New sustained release of Zidovudine Matrix tablets − cytotoxicity toward Caco-2 cells

Objective: The aim of this study was to adjust the zidovudine (AZT) release from solid tablets to an ideal profile, by developing matrices comprising swellable polymers with nonswellable ones.

Methods: Directly compressed matrices comprised different ratios of hydroxypropylmethylcellulose K15M and K100M, ethylcellulose, and methacrylic acid (Eudragit^® RS PO and Eudragit^® RL PO) were prepared. Technological characterization and evaluation of the in vitro release behavior were carried out. Cell density and viability following drug exposure were evaluated by the SRB method, for the Caco-2 line, while cell morphology was assessed upon Trypan blue staining.

Results: A specific formulation containing 5% of each excipient ? HPMC K15M, HPMC K100M, Eudragit^® RS PO, and Eudragit^® RL PO ? was found to yield the best release profile. Application of the Korsmeyer–Peppas model to the dissolution profile evidenced that a non-Fickian (anomalous) transport is involved in the drug release. Regarding the influence of the tablets’ composition on the drug’s cytotoxic effect toward the Caco-2 cell line, a reduction of cell biomass (0–15%) was verified for the distinct AZT formulations tested, F19 having displayed the highest cytotoxicity, after 24 and 48?h of incubation. Additionally, a high reversibility of the AZT effect was observed.

Conclusions: The results showed that the simultaneous application of both hydrophilic and hydrophobic polymers can modulate the drug release process, leading to an improved efficacy and patient compliance. All AZT formulations studied were found to be cytotoxic against Caco-2 cells, F19 being the most effective one.     

Formulation and Release Characteristics of Hydroxypropyl Methylcellulose Matrix Tablet Containing Melatonin

A hydroxypropyl methylcellulose (HPMC) matrix tablet containing melatonin (MT) was formulated as a function of HPMC viscosity, drug loading, type and amount of disintegrant, lubricant and glidant, and aqueous polymeric coating level and was compared with two commercial products. The release characteristics of the HPMC matrix tablet were investigated in the gastric fluid for 2 hr followed by study in intestinal fluid. The surface morphology of an uncoated HPMC matrix tablet using scanning electron microscopy (SEM) was crude, showing aggregated particles and rough crystals or pores, but it became smoother as the coating levels increased. As the HPMC polymer viscosity increased, the release rate had a tendency to decrease. As the drug loadings increased, the release rate slightly decreased. When Polyplasdone®XL, Primojel®, and Ac-Di-Sol®, except Avicel®, were incorporated in the HPMC matrix tablet, the release rate was markedly increased. There was no significant difference in release profiles when a mixture of lubricants and glidants (magnesium stearate, talc, and Cab-O-Sil®), except for magnesium stearate alone, was incorporated into low and high viscosity grade HPMC matrix tablets. As the coating level increased, the release rate gradually decreased, giving an increased lag time. The sustained-release HPMC matrix tablet with optimizing formulations may provide an alternative for oral controlled delivery of MT and be helpful in the future treatment of circadian rhythmic disorders.     

The Influence of Hydro-Alcoholic Media on Hypromellose Matrix Systems

Hydrophilic matrices are widely used for extended release drug delivery, with hypromellose (HPMC) being a popular rate-controlling carrier. The FDA has recently issued an alert regarding the potential negative influence of alcohol on extended release dosage forms.

The aim of this study was to investigate the hydroalcoholic solution effect on hydration, gel formation and drug release from HPMC matrices. None of the investigated matrix formulations (felodipine, gliclazide, and metformin hydrochloride) resulted in dose-dumping when exposed to ethanol solutions.

HPMC compacts made of three different viscosity grades of Methocel showed consistent swelling and gel formation when exposed to hydroalcoholic media.     

Preliminary evaluation of the in vitro release and in vivo absorption in rabbits of the modified-release dosage forms

Objective: The suitability of the rabbit as an animal model for the primary screening and selection of the pilot scale batches during the early stages of the formulation development was studied.

Materials and methods: Three modified-release formulations of aminophylline consisted of Carbopol® 971P/HPMC K4M (F-I), and HPMC K100M (F-II) or HPMC K4M (F-III) were used. Commercial products were Aminofilin retard 350?mg tablets, Srbolek, Serbia (R-I) and Phyllocontin^® 350, tablets Purdue Frederic, Canada (R-II).

Results: Calculated release rate constants and the ?2 values between R-I/F-I (84.1) and R-II/F-III (83.4) indicated similar in vitro release while the coefficient n showed presence of different mechanisms of release from Anomalous transport, Fickian diffusion to Case-II transport. Higher T_max, was found in the rabbits, dosed with F-II (12.00?h), F-III (10.50?h), and R-II (15.00?h) formulation. The highest C_max (9.22?mg/L) was obtained with F-II, similar lower values was seen for F-I and F-III, while commercial products showed the lowest values R-I (5.58?mg/L) and R-II (4.18?mg/L). Higher AUC values were detected for all three formulations (from 115.90 to 204.06 mgh/L) in relation to commercial products (105.33 and 113.25 mgh/L).

Discussion and conclusion: The results demonstrated a good correlation of Level A (r² = 0.97) for the two formulations (F-I, F-III) and commercial product (R-I) indicates that there is a reasonable assumption that the rabbit might be use as a model for the preliminary comparison of scale up formulations in the early stages of the product development.     

Formulation and in vitro studies of a fixed-dose combination of a bilayer matrix tablet containing metformin HCl as sustained release and glipizide as immediate release

The emerging new fixed dose combination of metformin hydrocholride (HCl) as sustained release and glipizide as immediate release were formulated as a bilayer matrix tablet using hydroxy propyl methyl cellulose (HPMC) as the matrix-forming polymer, and the tablets were evaluated via in vitro studies. Three different grades of HPMC (HPMC K 4M, HPMC K 15M, and HPMC K 100M) were used. All tablet formulations yielded quality matrix preparations with satisfactory tableting properties. In vitro release studies were carried out at a phosphate buffer of pH 6.8 with 0.75% sodium lauryl sulphate w/v using the apparatus I (basket) as described in the United States Pharmacopeia (2000). The release kinetics of metformin were evaluated using the regression coefficient analysis. There was no significant difference in drug release for different viscosity grade of HPMC with the same concentration. Tablet thus formulated provided sustained release of metformin HCl over a period of 8 hours and glipizide as immediate release.     

Formulation and In Vitro Studies of a Fixed-Dose Combination of a Bilayer Matrix Tablet Containing Metformin HCl as Sustained Release and Glipizide as Immediate Release

The emerging new fixed dose combination of metformin hydrocholride (HCl) as sustained release and glipizide as immediate release were formulated as a bilayer matrix tablet using hydroxy propyl methyl cellulose (HPMC) as the matrix-forming polymer, and the tablets were evaluated via in vitro studies. Three different grades of HPMC (HPMC K 4M, HPMC K 15M, and HPMC K 100M) were used. All tablet formulations yielded quality matrix preparations with satisfactory tableting properties. In vitro release studies were carried out at a phosphate buffer of pH 6.8 with 0.75% sodium lauryl sulphate w/v using the apparatus I (basket) as described in the . The release kinetics of metformin were evaluated using the regression coefficient analysis. There was no significant difference in drug release for different viscosity grade of HPMC with the same concentration. Tablet thus formulated provided sustained release of metformin HCl over a period of 8 hours and glipizide as immediate release.     

Release and permeation studies of propranolol hydrochloride from hydrophilic polymeric matrices

Abstract

In-vitro release of propranolol hydrochloride, from various hydrophilic polymeric bases was studied. These included: methocel®, avicel® CL-611/ methylcellulose, polyvinyl alcohol/gelatin based systems. Several additives, such as, ethyl alcohol, dimethylsulfoxide (DMSO) and polyethylene glycol-400 were included in the formulations for possible enhancement of the drug release. The release studies were carried out using the cellulose membrane and the hairless mouse skin as the diffusion barriers. The general rank order for the drug release through these membranes was observed to be: the methocel® matrix > the avicel® CL-611 matrix > the polyvinyl alcohol/gelatin matrix > and the emulsion base. The additives in the formulations had little or no effect in enhancing the drug release. However, when the hairless mouse skin was soaked in (DMSO) for one hour prior to its use in the diffusion studies, the drug release was found to increase by 40% from the methocel® matrix formulation.

The drug release data were treated with various kinetic principles to assess the relevant parameters, such as the diffusion, partition and permeability coefficients. Using these information, the formulations were screened for their suitability to deliver propranolol hydrochloride via the diadermatic dosage form.     

The effect of pH,buffer capacity and ionic strength on quetiapine fumarate release from matrix tablets prepared using two different polymeric blends

The objective of this study was to investigate the effect of the different physiological parameters of the gastrointestinal (GI) fluid (pH, buffer capacity, and ionic strength) on the in vitro release of the weakly basic BCS class II drug quetiapine fumarate (QF) from two once-a-day matrix tablet formulations (F1 and F2) developed as potential generic equivalents to Seroquel^® XR. F1 tablets were prepared using blends of high and low viscosity grades of hydroxypropyl methylcellulose (HPMC K4M and K100LV, respectively), while F2 tablets were prepared from HPMC K4M and PEGylated glyceryl behenate (Compritol^® HD5 ATO). The two formulations attained release profiles of QF over 24?h similar to that of Seroquel^® XR using the dissolution medium published by the Food and Drug Administration (FDA). A series of solubility and in vitro dissolution studies was then carried out using media that simulate the gastric and intestinal fluids and cover the physiological pH, buffer capacity and ionic strength range of the GIT. Solubility studies revealed that QF exhibits a typical weak base pH-dependent solubility profile and that the solubility of QF increases with increasing the buffer capacity and ionic strength of the media. The release profiles of QF from F1, F2 and Seroquel^® XR tablets were found to be influenced by the pH, buffer capacity and ionic strength of the dissolution media to varying degrees. Results highlight the importance of studying the physiological variables along the GIT in designing controlled release formulations for more predictive in vitro–in vivo correlations.     

Design and Evaluation In Vitro of Controlled Release Mucoadhesive Tablets Containing Chlorhexidine

ABSTRACT

This investigation deals with the development of buccal tablets containing chlorhexidine (CHX), a bis-bis-guanide with antimicrobial and antiseptic effects in the oral cavity, and able to adhere to the buccal mucosa to give local controlled release of drug. A mucoadhesive formulation was designed to swell and form a gel adhering to the mucosa and controlling the drug release into the oral cavity.

Some batches of tablets were developed by direct compression, containing different amounts of hydroxypropylmethylcellulose (HPMC) and carbomer; changing the amount ratio of these excipients in formulations, it is possible easily modulate the mucoadhesive effect and release of drug. The in vitro tests were performed using the USP 26/NF paddle apparatus, a specifically developed apparatus, and a modified Franz diffusion cells apparatus. This last method allows a simultaneous study of drug release rate from the tablets and drug permeation through the buccal mucosa.

Similar tests have also been carried out on a commercial product, Corsodyl gel^®, in order to compare the drug release control of gel with respect to that of the mucoadhesive tablet, as a formulation for buccal delivery of CHX. While the commercial formulation does not appear to control the release, the formulation containing 15% w/w methocel behaves the best, ensuring the most rapid and complete release of the drug, together with a negligible absorption of the active agent as required for a local antiseptic action in the oral cavity.     

Spray-dried O-carboxymethyl chitosan as potential hydrophilic matrix tablet for sustained release of drug

Objective: The aim of the present investigation was to evaluate the use of spray-dried O-carboxymethyl chitosan (OCMCS) as potential hydrophilic matrix excipient for sustained release of drug.

Methods: The polymer was synthesized from chitosan, then spray-dried and characterized. Tablets with different OCMCS concentrations (80, 50, 30, 5 and 2% w/w), containing diltiazem (DTZ) as model drug, were prepared for direct compression (DC) and after the wet granulation method (WG).

Results: The spray-dried OCMCS powder was spherical, with a smooth surface and an average size of 2.2?µm. The tablets prepared for WG disintegrated in time less than 30?min. The tablets obtained for DC presented high retention of the drug, with zero order or Higuchi release kinetic. There was a direct relationship between the OCMCS concentration and the release ratio, swelling degree and water uptake behavior. DC tablets containing 80% OCMCS presented behavior as an effective swelling-control system. The DC tablets with 5% OCMCS showed a similar release profile at formulations with 30% HPMC.

Conclusion: Spray-dried OCMCS showed great potential as hydrophilic matrices for drug-sustained release.     

Influence of Hydroxypropyl Methylcellulose Mixture,Apparent Viscosity,and Tablet Hardness on Drug Release Using a 23 Full Factorial Design

ABSTRACT

This study investigates the effects of three factors: (1) use of a mixture of two different grades of hydroxypropyl methylcellulose (HPMC), (2) apparent viscosity, and (3) tablet hardness on drug release profiles of extended-release matrix tablets. The lot-to-lot apparent viscosity difference of HPMC K15M on in vitro dissolution was also investigated. Four test formulations were made, each containing 10% of a very water-soluble active pharmaceutical ingredient (API), 32% HPMC K15M, or a mixture of HPMC K100LV and HPMC K100M, 56% diluents, and 2% lubricants. Each formulation was made at two hardness levels. A 2³ full factorial design was used to study various combinations of the three factors using eight experiments conducted in a randomized order. Dissolution studies were performed in USP apparatus I. The values of t_50% (time in which 50% drug is released) and t_lag (lag time, the time taken by the matrix tablet edges to get hydrated and achieve a state of quasi-equilibrium before erosion and the advance of solvent front through the matrix occur) were calculated from each dissolution profile. The similarity factor (f₂) was also calculated for each dissolution profile against the target dissolution profile. A simple Higuchi-type equation was used to analyze the drug release profiles. Statistical analysis using analysis of variance (ANOVA) and similarity factor (f₂) values calculated from the data indicated no significant difference among the t_50% values and dissolution profiles respectively for all formulations. Within the 3.3–6 kp hardness range investigated, dissolution rates were found to be independent of tablet hardness for all the formulations. Although significantly shorter lag times were observed for the tablets formulated with low- and high-viscosity HPMC mixtures in comparison to those containing a single grade of HPMC, this change had no significant impact on the overall dissolution profiles indicated by the similarity factor f₂ values. From this study it can be concluded that lot-to-lot variability in apparent viscosity of HPMC should not be a concern in achieving similar dissolution profiles. Also, results indicated that within the viscosity range studied (12,000–19,500 cps) an HPMC mixture of two viscosity grades can be substituted for another HPMC grade if the apparent viscosity is comparable. Also, the drug release is diffusion-controlled and depends mostly on the viscosity of the gel layer formed.     

Optimization of piribedil mucoadhesive tablets for efficient therapy of Parkinson’s disease: physical characterization and ex vivo drug permeation through buccal mucosa

Objective: The aim of this study was optimization of buccal piribedil (PR) mucoadhesive tablets to improve its low bioavailability and provide controlled release for the treatment of Parkinson’s disease.

Methods: Buccal tablets were prepared by direct compression method using carbomer (CP), carboxymethyl cellulose (CMC), and hydroxypropyl methylcellulose (HPMC) as mucoadhesive polymers. Physical properties of powder mixtures and buccal tablets were evaluated. Physicochemical compatibility between ingredients was investigated with infrared spectroscopy and differential scanning calorimetry analysis. In vitro dissolution profiles and drug release kinetics of buccal tablets were investigated. Mucoadhesion and ex vivo permeation studies were performed using sheep buccal mucosa.

Results: Powder mixtures demonstrated sufficient flow properties and physical characteristics of all tablet formulations were within compendia limits. Tablet ingredients were absent of any chemical interactions. CP tablets displayed slower drug release compared to HPMC tablets with zero order release, while CMC tablets lost their integrity and released entire drug after 6?h following Higuchi model. All formulations displayed adequate mucoadhesion and steady state flux of PR through buccal mucosa were higher with HPMC compared to CP-containing tablets.

Conclusion: Overall, HPMC was found to combine desired controlled release and mucoadhesion characteristics with sufficient pharmaceutical quality for optimization of buccal tablets. Piribedil mucoadhesive buccal tablets designed for the first time may introduce a new alternative for the treatment of Parkinson’s disease.     

The influence of HPMC concentration on release of theophylline or hydrocortisone from extended release mini-tablets

Context: Mini-tablets are compact dosage forms, typically 2–3 mm in diameter, which have potential advantages for paediatric drug delivery. Extended release (ER) oral dosage forms are intended to release drugs continuously at rates that are sufficiently controlled to provide periods of prolonged therapeutic action following each administration, and polymers such as hypromelllose (HPMC) are commonly used to produce ER hydrophilic matrices.

Objective: To develop ER mini-tablets of different sizes for paediatric delivery and to study the effects of HPMC concentration, tablet diameter and drug solubility on release rate.

Methods: The solubility of Hydrocortisone and theophylline was determined. Mini-tablets (2 and 3 mm) and tablets (4 and 7 mm) comprising theophylline or hydrocortisone and HPMC (METHOCEL? K15M) at different concentrations (30, 40, 50 and 60%w/w) were formulated. The effect of tablet size, HPMC concentration and drug solubility on release rate and tensile strength was studied.

Results and Discussion: Increasing the HPMC content and tablet diameter resulted in a significant decrease in drug release rate from ER mini-tablets. In addition, tablets and mini-tablets containing theophylline produced faster drug dissolution than those containing hydrocortisone, illustrating the influence of drug solubility on release from ER matrices. The results indicate that different drug release profiles and doses can be obtained by varying the polymer content and mini-tablet diameter, thus allowing dose flexibility to suit paediatric requirements.

Conclusion: This work has demonstrated the feasibility of producing ER mini-tablets to sustain drug release rate, thus allowing dose flexibility for paediatric patients. Drug release rate may be tailored by altering the mini-tablet size or the level of HPMC, without compromising tablet strength.     

Novel Use of Similarity Factors f2 and Sd for the Development of Diltiazem HCl Modified-Release Tablets Using a 32 Factorial Design

ABSTRACT

The objective of this study was to develop modified-release tablets of diltiazem HCl using a direct compression technique. A 3² factorial design was employed using the amount of alkali-treated guar gum and cetyl alcohol as independent variables. This article proposes the use of a novel approach—f₂and S_d values as dependent variables—to evaluate the effect of selected independent variables along with other dependent variables (i.e., percentage drug released in x min, Y_x; time required for z% drug release, t_z; and mean dissolution time (MDT)). It is concluded that when a decision is to be made for the selection of a best batch, it is perhaps more realistic to use the f₂ or S_d value which takes into account the dissolution profile as a whole, as opposed to Y_x and t_z values which use just one point from the dissolution plot. The batch showing the f₂ value nearest to 100 or the S_d value nearest to zero is ranked as the best batch (diltiazem HCl 90 mg, alkali-treated guar gum 80 mg and cetyl alcohol 15 mg). The gel strength and matrix erosion of the formulated tablets were dependent on the type and amount of the adjuvants. The drug release rate is well correlated with matrix erosion. The kinetics of drug release fitted best to the Korsmeyer and Peppas model. It is concluded that by using a proper combination of the hydrophilic polymer and cetyl alcohol one can achieve a desirable drug release pattern.     

Sustained Release from Precirol® (Glycerol Palmito-Stearate) Matrix. Effect of Mannitol and Hydroxypropyl Methylcellulose on the Release of Theophylline

Abstract

The release of theophylline embedded in a Precirol® (glycerol palmitostearate) matrix containing varying amounts of mannitol and/or hydroxypropyl methyl cellulose 4000 (HPMC) was studied. The results indicated that HPMC or mannitol when incorporated alone, the drug release followed the diffusion-controlled matrix model where the quantity of drug released was proportional to the square root of time. The release rate was found to increase with increase in the amount of HPMC or mannitol in the matrix. When both mannitol and HPMC were incorporated in the matrix, the mechanism of release changed from the Higuchi model to a first-order release. A linear relationship was found between the fraction of HPMC or mannitol in the matrix and the rate constant. An optimum combination of Precirol®, mannitol and HPMC was found for a 12 hour theophyll ine sustained release preparation     

The influence of tablet density on the human oral absorption of sustained release acetaminophen matrix tablets

Abstract

Low density bilayer compressed matrix tablets of acetaminophen were tested for in vitro dissolution and in vivo oral absorption. The upper layer contained a carbon dioxide-generating blend and the lower layer contained hydroxypropyl methylcellulose (HPMC) and acetaminophen. Carbon dioxide liberated by the action of the acidic dissolution medium on the upper layer is entrapped in the gelled hydrocolloid, providing buoyancy of the tablet and sustained release of the drug. For comparative purposes, similar but non-gas generating bilayer compressed matrix tablets were formulated and tested in vitro under the same conditions. These high density tablets were found to yield similar dissolution profiles as the low density tablets. The absorption characteristics of the bilayer compressed matrix tablets were compared with those of rapidly disintegrating acetaminophen tablets (TYLENOL® tablets, 500 mg) under fasted and fed conditions in six healthy subjects. Under fasted conditions, saliva profiles showed a rapid absorption for TYLENOL tablets but slower absorption for both compressed matrix tablets. Saliva profiles of TYLENOL® tablets under fed conditions were similar to those for the fasted case. In contrast, the peak saliva levels of acetaminophen for both compressed matrix tablets were significantly increased under fed conditions. The time to maximum saliva concentrations (Tmax) of all three dosage forms was not significantly affected by food intake. The relative bioavailability of the low density tablets under fasted and fed conditions was not significantly different from those of TYLENOL tablets, but vas significantly greater than that of high density tablets under fasted and fed conditions. A possibility exists that the buoyancy mechanism enabled the tablet to maintain more prolonged residence time in the gastrointestinal tract.