Albumin Microspheres: effect of process Variables on size Distribution and in Vitro Release

Albumin microspheres used as target drug delivery systems were prepared from egg albumin by polymerization technique using glutaral dehyde as the cross linking agent. The present study was designed to evaluate the effect of process variables on the nicrosphere size distribution and in vitro drug release. Phase volume ratio and speed of agitation exerted greater influence on the microsphere size distribution whereas the albumin concentration and cross linking time effected only the yield and surface characteristics of the microspheres respectively. Lower phase volume ratios resulted in small and uniform microspheres with smooth surfaces in narrow size range. Speed of agitation exhibited an inverse relationship with size. In vitro release pattern of drug from the microspheres showed a biphasic profile and the release rates were prolonged upon increase in the concentration of cross linking agent and cross linking time.     

Preparation,Characterization and In-Vitro Release Kinetics of Salbutamol Sulphate Loaded Albumin Microspheres

Abstract

Salbutamol sulphate loaded Bovine serum albumin microspheres were prepared by heat denaturation method. The effects of such preparation conditions as denaturation temperature, denaturation time, protein concentration and phase volume ratio on the extent of drug loading, size and size distribution and drug release were studied. An increase in protein concentration from 5% w/v to 15% w/v increased the mean particle size from 8.5 μm to 16.6 μm and decreased the drug loading from 46% w/w to 18% w/w. A decrease in the phase volume ratio substantially lowered mean particle size and size distribution. An increase in the severity of denaturaion conditions lowered both the drug incorporated and drug released. The kinetics of drug release from microspheres were compared to the theoretical models of Higuchi diffusional release and first order release. Both the models gave an adequate fit to the data. Scanning electron microscopy revealed that the dummy microspheres are spherical with smooth surfaces. As the drug-protein ratio increased, the microspheres exhibited rough surfaces showing the presence of drug crystals.     

Aqueous Preparation and Evaluation of Albumin‐Chitosan Microspheres Containing Indomethacin

Controlled‐release egg albumin‐chitosan microspheres containing indomethacin as a model drug were successfully prepared by coacervation method. The proposed method can offer a simple method for microsphere preparation in an aqueous system with the elimination of the use of organic solvents that are usually needed in conventional techniques of microencapsulation. The interaction between negatively charged egg albumin molecules in phosphate buffer, pH 7.2, or sodium hydroxide solution and positively charged chitosan molecules dissolved in diluted acetic acid to form an insoluble precipitate was the principle for the formation of the microspheres. The effects of many process variables, such as amount of formaldehyde as a cross‐linking agent, stirring time, final pH of encapsulation medium, initial drug loading, and albumin concentration or albumin‐to‐chitosan weight ratio, on the properties of the prepared microspheres were investigated. Incorporation efficiencies of the microspheres to the drug were high in most cases and ranged between 63.3 ± 3.6% and 92.39 ± 3.2%, while particle sizes were 435.2 ± 12.6 up to 693.9 ± 34.6 µm for the different tested batches. On the other hand, the values of angles of repose and compressibility indices were in the range of 23.5 ± 0.4 to 32.0 ± 0.7 degrees and 11.1 ± 0.7% to 23.6 ± 0.7% respectively, which indicate overall good free flowing nature of the microspheres of all batches. The maximum required amount of the cross‐linking agent was determined to avoid excessive unnecessary chemicals. It was also noticed that excessive time of stirring and excessive initial drug loading are not recommended as it may lead to microspheres of low properties. The pH of the encapsulation media (pH 3.77 up to pH 4.91) significantly affected the properties of the microspheres. As the pH of the encapsulation media was increased, the incorporation efficiency, particle size, and flowability decreased, along with increase of drug release rate, which could be related to incomplete cross linking of the microspheres matrix. It was also observed that high concentration of albumin solution and accordingly the increase of albumin‐to‐chitosan weight ratio were accompanied with increases in incorporation efficiency and particle size with improved microsphere flowability and slow indomethacin release. Thus, the proposed microspheres showed the ability to control the release of indomethacin, and their properties were highly affected by many process variables that could be controlled to obtain an optimized system.     

Preparation, Characterization and In-Vitro Release Kinetics of Salbutamol Sulphate Loaded Albumin Microspheres

Salbutamol sulphate loaded Bovine serum albumin microspheres were prepared by heat denaturation method. The effects of such preparation conditions as denaturation temperature, denaturation time, protein concentration and phase volume ratio on the extent of drug loading, size and size distribution and drug release were studied. An increase in protein concentration from 5% w/v to 15% w/v increased the mean particle size from 8.5 μm to 16.6 μm and decreased the drug loading from 46% w/w to 18% w/w. A decrease in the phase volume ratio substantially lowered mean particle size and size distribution. An increase in the severity of denaturaion conditions lowered both the drug incorporated and drug released. The kinetics of drug release from microspheres were compared to the theoretical models of Higuchi diffusional release and first order release. Both the models gave an adequate fit to the data. Scanning electron microscopy revealed that the dummy microspheres are spherical with smooth surfaces. As the drug-protein ratio increased, the microspheres exhibited rough surfaces showing the presence of drug crystals.     

Prolonged Release of Tegafur from S/O/W Multiple Emulsion

Abstract

To develop a prolonged and sustained release preparation, we prepared an albumin microsphere-in-oil-in-water emulsion (S/O/W) and examined sustained release from it in comparison with other control preparations such as water-in-oil (W/O) emulsions and microspheres in vitro and in vivo, respectively. Tegafur was used as a model drug. A microsphere-in-oil emulsion was prepared by adding albumin microspheres to soybean oil containing 20% Span 80. To prepare an S/O/W emulsion, the microsphere-in-oil emulsion was added into an aqueous solution of hydroxypropyl methylcellulose containing Pluronic F68. The mean particle size of the albumin microspheres was 3 µm, and the ratio of entrapment of tegafur into albumin microspheres was about 25%. In an in vitro release test, the t₇₅ of the S/O/W emulsion was fourfold greater and in an in vivo release test the mean residence time of tegafur from the S/O/W emulsion was more than twofold that from a W/O emulsion or microsphere system. The mean residence time of 5-fluorouracil (5-FU) from an S/O/W emulsion was also greater than with other dosage forms. These results suggest the possible usefulness of an S/O/W emulsion for the sustained and prolonged release of tegafur.     

In Vitro Evaluation of Albumin Microspheres Containing Actinomycin D

Abstract

Albumin microspheres containing actinomycin D were prepared by the heat stabilization method. The compata-bility of the drug with magnetite and the optimum stability of the drug in different pH were studied. Drug loaded albumin microspheres containing magnetite showed good magnetic response. Release of the drug was slow and continued for 7 days exhibiting sustained release property. The difference as regards to the size, shape, drug content and release rate from freshly prepared and freeze dried drug loaded albumin microspheres was negligible.     

Enteric-coated epichlorohydrin crosslinked dextran microspheres for site-specific delivery to colon

Abstract

Enteric-coated epichlorohydrin crosslinked dextran microspheres containing 5-Fluorouracil (5-FU) for colon drug delivery was prepared by emulsification-crosslinking method. The formulation variables studied includes different molecular weights of dextran, volume of crosslinking agent, stirring speed, time and temperature. Dextran microspheres showed mean entrapment efficiencies ranging between 77 and 87% and mean particle size ranging between 10 and 25?µm. About 90% of drug was released from uncoated dextran microspheres within 8?h, suggesting the fast release and indicated the drug loaded in uncoated microspheres, released before they reached colon. Enteric coating (Eudragit-S-100 and Eudragit-L-100) of dextran microspheres was performed by oil-in-oil solvent evaporation method. The release study of 5-FU from coated dextran microspheres was complete retardation in simulated gastric fluid (pH 1.2) and once the coating layer of enteric polymer was dissolved at higher pH (7.4 and 6.8), a controlled release of the drug from the microspheres was observed. Further, the release of drug was found to be higher in the presence of dextranase and rat caecal contents, indicating the susceptibility of dextran microspheres to colonic enzymes. Organ distribution and pharmacokinetic study in albino rats was performed to establish the targeting potential of optimized formulation in the colon.     

Casein Microbeads as a Controlled Parenteral Drug Delivery System

The formulation of a novel controlled release Parenteral dosage form was the goal of this study. Microbeads of crosslinked casein containing Diethyl-stilboestrol (DEST), as a model drug, have been prepared using emulsion polymerization technique. The effect of different concentrations of Glutaraldehyde, as a cross linking agent, on particle size, particle size distribution, shape of microbeads, drug content as well as the rate of drug release from the microbeads were studied. Spherical microbeads with low particle size distribution and high drug load were obtained as glutaraldehyde concentration increased. Furthermore, the release rate from the microbeads were decreasing with the increase of the concentration of the cross linking agent. The effect of pH of casein solution as well as the amount of added drug on the characteristics of the microbeads were also investigated. The biodegradability of casein microbeads prepared at glutaraldehyde concentration 2.37% were tested in α-chymotrypsin solution. The microbeads showed a distinct signs of biodegradation within few days of incubation. No signs of adverse effect were noticed when drug free casein microbeads were injected intraprotenially in mice. It was concluded that casein microbeads could be considered as a good candidate for the preparation of a dependable parenteral time release dosage form.     

Aqueous preparation and evaluation of albumin-chitosan microspheres containing indomethacin

Controlled-release egg albumin-chitosan microspheres containing indomethacin as a model drug were successfully prepared by coacervation method. The proposed method can offer a simple method for microsphere preparation in an aqueous system with the elimination of the use of organic solvents that are usually needed in conventional techniques of microencapsulation. The interaction between negatively charged egg albumin molecules in phosphate buffer, pH 7.2, or sodium hydroxide solution and positively charged chitosan molecules dissolved in diluted acetic acid to form an insoluble precipitate was the principle for the formation of the microspheres. The effects of many process variables, such as amount of formaldehyde as a cross-linking agent, stirring time, final pH of encapsulation medium, initial drug loading, and albumin concentration or albumin-to-chitosan weight ratio, on the properties of the prepared microspheres were investigated. Incorporation efficiencies of the microspheres to the drug were high in most cases and ranged between 63.3 ± 3.6% and 92.39 ± 3.2%, while particle sizes were 435.2 ± 12.6 up to 693.9 ± 34.6 µm for the different tested batches. On the other hand, the values of angles of repose and compressibility indices were in the range of 23.5 ± 0.4 to 32.0 ± 0.7 degrees and 11.1 ± 0.7% to 23.6 ± 0.7% respectively, which indicate overall good free flowing nature of the microspheres of all batches. The maximum required amount of the cross-linking agent was determined to avoid excessive unnecessary chemicals. It was also noticed that excessive time of stirring and excessive initial drug loading are not recommended as it may lead to microspheres of low properties. The pH of the encapsulation media (pH 3.77 up to pH 4.91) significantly affected the properties of the microspheres. As the pH of the encapsulation media was increased, the incorporation efficiency, particle size, and flowability decreased, along with increase of drug release rate, which could be related to incomplete cross linking of the microspheres matrix. It was also observed that high concentration of albumin solution and accordingly the increase of albumin-to-chitosan weight ratio were accompanied with increases in incorporation efficiency and particle size with improved microsphere flowability and slow indomethacin release. Thus, the proposed microspheres showed the ability to control the release of indomethacin, and their properties were highly affected by many process variables that could be controlled to obtain an optimized system.     

Carnauba Wax Microspheres Loaded with Valproic Acid: Preparation and Evaluation of Drug Release

Abstract

To minimize unwanted toxic effects of valproic acid (1) by the kinetic control of drug release, gastroresistant carnauba wax microspheres loaded with the antiepileptic agent were prepared. The preparation was based on a technique involving melting and dispersion of drug-containing wax in an aqueous medium. The resulting emulsion after cooling under rapid stirring produced solid, discrete, reproducible free flowing microspheres which converted the liquid drug droplets into solid material. About 94% of the isolated microspheres were of particle size range 200-425 μm. The microspheres were analyzed to determine the drug content in various particle size range and to characterize the in vitro release profile. The average drug content was 26% w/w. The intestinal drug discharge of 1 from the carnauba wax microspheres was studied and compared with the release patterns observed for white beeswax and hexadecanol microspheres previously described. The drug release performance was greatly affected by the material used in the microencapsulation process. In the intestinal environment carnauba wax microspheres exhibited more rapid initial rate of release and about 80% of the entrapped drug was discharged in 120 min while complete release occurred in about 8 h.     

Preparation of alginate–CaCl2 microspheres as resveratrol carriers

Resveratrol-loaded calcium alginate microspheres for prolonged drug release were prepared by ionic gelation of alginate with calcium chloride (CaCl₂). Further, resveratrol-loaded calcium alginate microspheres were developed using two concentrations of alginate (0.5 and 1 % w/v) and CaCl₂ (0.5 and 1 M) and an encapsulator equipped with a 300-μm nozzle. The mean particle size of the microspheres was between 175.52 and 244.03 μm, and an encapsulation efficiency (EE) of over 95 % was observed. FTIR spectroscopy indicated a polyelectrolyte interaction between alginate and CaCl₂; alginate microsphere thermograms were analyzed by differential scanning calorimetry. X-ray diffraction shows the crystalline change of microspheres by cross linking. The release profiles and EE increased depending on the CaCl₂ concentration, and a slow initial burst release was observed on freeze-dried microspheres. These results indicate that resveratrol-loaded calcium alginate microspheres can be used as a potential resveratrol delivery system in the food industry.     

The synthesis and characterization of polymer coated iron oxide microspheres

For biomedical applications drug carrying polymers are coated around magnetic iron oxide particles to form microspheres. In the present study, the iron oxide powder was ball milled. Microspheres were then synthesized by solvent evaporation, resulting in iron oxide particles encapsulated in a polymer and drug coating. Various parameters, such as the duration of milling and agitation speed as well as the polymer concentration were varied. A milling time of 72 h was found to yield a small size and narrow size distribution of particles; the average particle size was about 600 nm. Measurements of the change in grain size and the magnetic properties of the powder with milling time were performed. It was determined that the size of the microspheres was not sensitive to the initial particle size, but it could be decreased by variation of agitation speed or polymer concentration. The agitation speed and polymer concentration of 400 rpm and 0.04 g poly(l-lactic acid) in 8 g dicholoromethane, respectively, was found to yield small, spherical microspheres with a narrow size distribution. The surface morphology and magnetic properties of the microspheres was also analyzed.     

Ondansetron-loaded chitosan microspheres for nasal antiemetic drug delivery: an alternative approach to oral and parenteral routes

Background: The aim of this study was to develop chitosan microspheres for nasal delivery of ondansetron hydrochloride (OND). Method: Microspheres were prepared with spray-drying method using glutaraldehyde as the crosslinking agent. Microspheres were characterized in terms of morphology, particle size, zeta potential, production yield, drug content, encapsulation efficiency, and in vitro drug release. Results: All microspheres were spherical in shape with smooth surface and positively charged. Microspheres had also high encapsulation efficiency and the suitable particle size for nasal administration. In vitro studies indicated that all crosslinked microspheres had a significant burst effect, and sustained drug release pattern was observed until 24 hours following burst drug release. Nasal absorption of OND from crosslinked chitosan microspheres was evaluated in rats, and pharmacokinetic parameters of OND calculated from nasal microsphere administration were compared with those of both nasal and parenteral administration of aqueous solutions of OND. In vivo data also supported that OND-loaded microspheres were also able to attain a sustained plasma profile and significantly larger area under the curve values with respect to nasal aqueous solution of OND. Conclusion: Based on in vitro and in vivo data, it could be concluded that crosslinked chitosan microspheres are considered as a nasal delivery system of OND.     

In-Vitro Release of Acetaminophen from Sodium Alginate Controlled Release Pellets

Abstract

The production of spheres loaded with acetaminophen by the cross linking technique was achieved. The hydrophilic polymer sodium alginate which gels in presence of a cross linking ion was used as a matrix for the spheres production. Two processing variables were studied. The drug load in the formula which varied from 5% w/v to 20% w/v, and the cross linking agents used; calcium chloride, calcium acetate, and aluminum sulfate. Also the effects of the dissolution medium and the rotational speed of the dissolution apparatus on drug release were investigated. Spheres were compacted into 450 mg tablets without the aid of excipients. The drug release from spheres containing 20% w/v drug was 90% after 6 hours, while the drug release from compacts of these spheres was 90% after 12 hours. The mechanism of drug release from spheres and compacts containing 20% w/v drug and prepared with 5% w/v cross linking material     

Cyclophosphamide Loaded Albumin Microspheres: Liver Entrapment and Fate in Mice

Abstract

Microspheres offer the possibility of target selectivity through choice of appropriate size or surface charecteristics, slow release of drug and also minimize systemic toxicity. The active substance of this investigation, cyclophosphamide (CP), interferes with the growth of cancer cells which are eventually destroyed. Since side effects of CP are frequently dose related, by incorporating low dose of CP to human serum albumin (HSA) microspheres, the normal body cells are not affected while the tumour cells are destroyed.

Cyclophosphamide microspheres were prepared by the modification of the method of Scheffel et al and Gürkan et al. 2,3-butanedione was used as a cross-linking agent. The albumin microspheres containing CP were labelled by ^99mTc by incorporating SnC1₂.2H₂0 at a concentration of 5% of the matrix material. All the microspheres used in this study ranged between 1–5 μm.

A suspension of ^99mTc labelled cyclophosphamide microspheres was injected into swiss albino mice intravenously. At 15 min, 30 rain, 6 h and 24 h mice were killed and the organs assayed for radioactivity accumulated in each organ. 1 hour later the radioactivity in the liver increased to 4.73 percent. By 24 hours, 2.68 percent of the radioactivity was found in the liver. Whereas the percentage of free cyclophosphamide at 1 and 24 hours was 2.22 and 2.57 percent, respectively. Based on the evidence obtained from these results, the application of CP loaded HSA microspheres seems advantages in accumulation in liver.     

Preparation of Novel Cationic Copolymer Microspheres and Evaluation of Their Function by In Vitro and In Vivo tests as Ph-Sensitive Drug Carrier Systems

ABSTRACT

Novel pH-sensitive copolymer microspheres containing methylacrylic acid and styrene cross-linking with divinylbenzene were synthesized by free radical polymerization. The microspheres that were formed were then characterized by Fourier-Transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), size analysis, and X-ray analysis. The copolymer microspheres showed pulsatile swelling behavior whenthe pH of the media changed. The pH-sensitive microspheres were loaded with diltiazem hydrochloride (DH). The release characteristics of the free drug and the drug-loaded microspheres were studied under both simulated gastric conditions and intestinal pH conditions. The in vivo evaluation of the pulsatile preparation was subsequently carried out using beagle dogs as experimental subjects. The results demonstrated that the drug release exhibited a pulsatile character both in vitro and in vivo.     

Influence of the Drug and Ezcipient Solubility on the Antibiotic Release from Polymethacrylic Implants

Abstract

Polymethacrylic implants were prepared by use the monomer (Kallocryl^R) and a polymerization extrusion technique. The antibiotics used were gentamicine, streptomycine and chloramphenicol. The excipients used were amino acids with various solubilities and titan dioxyde as an inert and insoluble matrix filler. The drug release examined in vitro by use a modified pitcher/half change method was dependent on the mechanical strength of the matrix, the concentration and the solubility of the amino acid used and the drug concentration and solubility.

The water inflow into the matrix was of effect on the volume of pores and may be influenced by the drug and excipient particle size and solubility.

There was a relationship between the time dependent volume of pores in the matrix and the amount of drugs released from the implants.     

Dissolution Characteristics of Polycaprolactone-Polylactide Microspheres of Chlorpromazine

Abstract

Studies were conducted on the preparation of controlled release polycaprolactone-polylactide microcapsules of chlorpromazine and on release of the drug from the microcapsules in pH 7.0 buffer medium. A wide range of release rates of the drug was obtained by simple change in the polymer system. Chlorpromazine was released from the microspheres in a biphasic manner consisting of an initial fast release phase followed by a slow-release phase. Increasing the drug content increased the initial drug release rate but no significant drug loading effect on the second stage dissolution rate was noted. There was no significant effect of particle size on the drug release rate from the microspheres. The swelling property of the microspheres and the agglomerate nature of the sieve fractions may complicate the drug release kinetics and obscure the particle size effect on dissolution rate.     

In Vivo Characteristics of Injectable Poly(DL-Lactic Acid) Microspheres for Long-Acting Drug Delivery

Abstract

Poly(DL-lactic acid) (PLA) microspheres containing testosterone (T) were prepared by the solvent evaporation process to evaluate their physical properties such as size distribution, shape, drug content, in vivo controlled drug release, pharmacological influences on the prostate gland in castrated rats, and histopathological findings of tissues surrounding the implants. The in vivo release of T from PLA microspheres containing 30 mg of drug obtained with chloroform was continued over a 6-week period. This effect is attributed to high dispersibility ofT in the device when obtained with chloroform. Both serum drug levels and prostate gland weight recovery suggested the effects of a long-acting drug delivery system. The histopathological findings showed that the devices used were completely degraded 10 weeks after injection.     

Screening of ionically crosslinked chitosan-tripolyphosphate microspheres using Plackett–Burman factorial design for the treatment of intrapocket infections

Objective: Application of Plackett–Burman factorial design to investigate the effect of processing factors in the fabrication of ionically crosslinked chitosan-tripolyphosphate (CS-TPP) microspheres.

Significance: Microspheres were screened and optimized to provide maximum process yield (PY), encapsulation efficiency (EE), and time for 80% drug release (T_80%) and minimum burst and particles size (PS), for successful application in periodontitis.

Methods: Processing factors viz. method of preparation (MOP), CS, TPP, crosslinking time (CT), agitation (AS), and drying technique (DT) were selected. Solid state characterization was performed by Fourier-Transform infrared (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and scanning electron microscopy (SEM). Mucoadhesion, cytocompatibility, and stability of microspheres were also evaluated.

Results: Pareto analysis and analysis of variance, screened most significantly (p?Staphylococcus aureus and Escherichia coli, cytocompatibility for L929 cells, and long-term stability.

Conclusions: Therefore, CS-TPP microspheres were found mucoadhesive, safe, stable and provided controlled and prolonged release of drugs. These properties confirmed its high potential and applicability in chronic periodontitis.