单片机实现气体压强的测量

介绍了以89C52为控制器的气体压强的测量仪，并采用液晶显示模块完成其显示功能。可记录30组数据，分30页显示，具有较高的测量精度和友好的显示界面。     

基于FPGA的TFT-LCD数字显示控制器设计

介绍了一种基于FPGA的TFT-LCD数字显示控制器的实现方法,采用FPGA实现TFT-LCD显示时序的产生、显示图像处理、双显存的读写轮换控制等功能。该设计方式可以根据实际功能任务需求,对专用显示控制芯片的接口功能进行裁剪,定制显示控制功能,增强了系统的可靠性和设计的灵活性。将其应用于一款液晶显示控制单元(DCU),解决了工程实际问题。     

基于FPGA的TFT—LCD数字显示控制器设讨

介绍了一种基于FPGA的TFT—LCD数字显示控制器的实现方法,采用FPGA实现TFT—LCD显示时序的产生、显示图像处理、双显存的读写轮换控制等功能。该设计方式可以根据实际功能任务需求,对专用显示控制芯片的接口功能进行裁剪,定制显示控制功能,增强了系统的可靠性和设计的灵活性。将其应用于一款液晶显示控制单元（DCU）,解决了工程实际问题。     

DMF5001／5002液晶显示模块的应用

ＤＭＦ５００１／５００２点阵图形式液晶显示模块内含Ｔ６９６３Ｃ控制器和字符发生器，并可自选字符，使用方便。本文介绍了其性能、特点、管脚功能，对其指令和显示功能之间的关系进行了剖析，给出了应用程序流图，并说明了应用注意事项。     

实用显示技术

本文主要介绍了ＬＥＤ显示器中ＨＤＳＰ－２５３２的应用，以ＳＥＤ１５２０为显示驱动控制器的点阵图形式ＬＣＤ显示器的应用，ＬＣＤ显示器的新产品－采用内热式加热技术的ＬＣＤ显示器以及和ＬＣＤ兼容的ＶＦＤ显示器。     

用FPGA实现数字语音系统中的VGA控制器

介绍了用FPGA代替显示器控制器(CRTC),并用VHDL产生VGA时序信号的详细方法,从而完成了用FPGA实现数字语音系统中的VGA控制器的设计方案.这种设计方法已经应用于数字语音系统的显示部分.     

基于TMS320LF2407A控制的SED1335液晶显示方案

阐述了液晶显示控制器SED1335的性能特点和指令系统,DSP控制器TMS320LF2407A的功能特性和工作特点,以及TMS320LF2407A与SED1335的接口设计以及SED1335图形、文本显示的实现方法,讨论了DSP驱动液晶显示模块的设计思路及软件设计方案,给出了具体的编程范例和软件流程。提出的设计方案具有结构简单、稳定可靠、容易实现的特点,可适用于许多智能仪器仪表、小型家电的开发领域。     

家用电器模糊控制器的研究与设计

采用模糊控制器对家用电器进行自动控制，给出了家用电器模糊控制器的设计过程和硬件设计方案。将人工智能领域的模糊控制技术成功地应用到了家用电器的设计中，使其实现一定的智能化，扩展了其功能，给人们的生产和生活带来了更多的方便。     

应用于LCD控制器的动态抖动算法及帧速率控制技术

文章提出了应用于液晶显示(LCD)控制器的动态抖动算法及帧速率控制技术。抖动算法极大的改善了显示图象的平滑度，帧速率控制技术大大增加图象灰度而明显降低图象的抖动和赝象。结果显示在LCD控制器中采用动态抖动算法及帧速率控制技术，如果每一象素数据的位宽是8比特，则单色图象的显示效果可高达256级灰度，彩色图象高达256^3彩色。     

彩色显示器设计的一款新方案

随着计算机技术的发展，，用户对作为计算机最主要的外部设备之一──显示器的质量要求也不断提高，要求有更加完善的功能、更高的显示分辨能力、更小的图像失真等等。目前在个人电脑中使用较多的彩色显示器为１４英寸、１５英寸，功能相对较少，价格也较低，而１７，１９，对英寸等大屏幕彩显，功能多一些，且一般成本较高。在此介绍一款ＮＳ公司的新设计方案，其性能较原来的彩色显示器有了较大提高，从１４英寸到２１英寸的配置，均具有屏幕显示ＯＳＤ功能，电路框图见图１。视频前置放大器采用ＬＭ１２７９Ｎ／ＬＭ１２８１Ｎ／ＬＭ１２…     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.