Realization of high mobility p-type co-doped ZnO: AlN film with a high density of nitrogen-radicals

High mobility p-type ZnO:AlN thin films have been efficiently realized by utilizing pre-activated nitrogen (N) plasma sources with an inductively coupled dual target co-sputtering system. High density of N-plasma-radicals was generated with an additional RF power applied through a ring-shaped quartz-tube located inside the chamber during co-sputtering process. The AlN codoped ZnO film shows excellent p-type behavior with a high mobility and a hole concentration of 154 cm^2°V^− 1s^− 1 and about 3 × 10^18°cm^− 3 at 600 °C, respectively. Electrical properties of p-n homo-junction devices based on p-type ZnO film are also discussed.     

Influence of annealing temperature on structural,electrical and optical properties of undoped zinc oxide thin films

The undoped zinc oxide thin films were grown on quartz substrate at a substrate temperature of 750 °C by radio frequency magnetron sputtering and post annealed at different temperatures (600–800 °C) for a period of 30 min. The influence of annealing temperature on the structure, electrical and optical properties of undoped ZnO thin films was investigated by X-ray diffraction, Hall-effect, photoluminescence and optical transmission measurements. Results indicated that the electrical properties of the thin films were extremely sensitive to the annealing temperature and the conduction type could be changed dramatically from n-type to p-type, and finally changed to weak p-type when the temperature increased from 600 to 800 °C. Electrical and photoluminescence results indicate that native defects, such as oxygen and zinc vacancies, could play an important role in determining the conductivity of these nominally undoped ZnO thin films. The conversion of the conduction type was attributed to the competition between Zn vacancy acceptor and oxygen vacancy and interstitial Zn donors. At an intermediate annealing temperature of 750 °C, the film behaves the best p-type characteristic, which has the lowest resistivity of 12 Ωcm, hall mobility of 2.0 cm²/V s and carrier concentration of 1.5 × 10¹⁷ cm^?3. The photoluminescence results indicated that the Zn vacancy might be responsible for the intrinsic better p-type characteristic in ZnO thin films.     

AlN codoping and fabrication of ZnO homojunction by RF sputtering

The ZnO homojunction fabricated from undoped and 1 mol% AlN doped (codoped) ZnO targets by RF magnetron sputtering has been reported. The grown films on Si (100) substrate have been characterized by X-ray diffraction (XRD), Energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Photoluminescence (PL) and Hall measurements. The increase of d-space value (compared with unstressed bulk) found from XRD for AlN codoped ZnO film supports the formation of p-ZnO due to the N incorporation. The presence of N in the film has been confirmed by EDS and XPS analysis. Further, the p-conductivity in AlN codoped ZnO has been evidenced by low temperature PL (donor-acceptor-pair emission) and room temperature PL (red shift in near-band-edge emission). Hall measurement shows that 1 mol% AlN codoped ZnO has the hole concentration of 3.772 × 10¹⁹ cm⁻³. The fabricated homojunction with 1% AlN doped ZnO (p-type) and undoped ZnO (n-type) exhibits a typical rectification behavior with high breakdown voltage, and rectification ratio, 13.4. The junction parameters such as ideality factor, barrier height and series resistance have also been calculated for the fabricated p-n junction. The energy band diagram has been proposed for the fabricated homojunction.     

Stable p-type ZnO films grown by atomic layer deposition on GaAs substrates and treated by post-deposition rapid thermal annealing

Long-term stable p-type ZnO films were grown by atomic layer deposition on semi-insulating GaAs substrates and followed by rapid thermal annealing (RTA) in oxygen ambient. Significant decrease in the electron concentration and increase in the hole concentration, together with the intensity enhancement of acceptor-related A^oX spectral peak and the shift of bound exciton peak from D^oX to A^oX in the low-temperature photoluminescence spectra, were observed as the RTA temperature increased. Conversion of conductivity from intrinsic n-type to extrinsic p-type ZnO occurred at the RTA temperature of 600 °C. The p-type ZnO film with a hole concentration as high as 3.44 × 10²⁰ cm^− 3 and long-term stability up to 180 days was obtained as the RTA treatment was carried out at 700 °C. The results were attributed to the diffusion of arsenic atoms from GaAs into ZnO as well as the activation of As-related acceptors by the post-RTA treatment.     

Optical, electrical and structural properties of Cu2Te thin films deposited by magnetron sputtering

Thin films of Cu₂Te were deposited, at room temperature, on glass substrates by magnetron sputtering from independent Cu and Te sources. This work presents the effect of annealing temperature on the optical, structural, and electrical properties of sputtered Cu₂Te films. Annealing above 300 °C resulted in stoichiometric and near stoichiometric Cu₂Te phases, whereas temperatures above 400 °C yielded films with single Cu₂Te phase. In contrast, annealing at temperatures of 250 °C and below resulted in mixed phases of CuTe, Cu₇Te₅, Cu_1.8Te, and Cu₂Te. Analyses of transmittance and reflectance measurements for Cu₂Te indicate that photon absorption occurs via indirect band transitions for incident photons with energy above the band gap energy and free carrier absorption below the band gap energy. The determined indirect band gap was 0.90 eV and its associated phonon energy was 0.065 eV. Optical phonon scattering was identified as the mechanism through which the momentum is conserved during absorption by free carriers. Electrical measurements show p-type conductivity and highly degenerate semiconducting behavior with a hole carrier concentration p = 5.18 × 10²¹ cm^− 3.     

ZnO thin films prepared by atomic layer deposition and rf sputtering as an active layer for thin film transistor

Recently, the application of ZnO thin films as an active channel layer of transparent thin film transistor (TFT) has become of great interest. In this study, we deposited ZnO thin films by atomic layer deposition (ALD) from diethyl Zn (DEZ) as a metal precursor and water as a reactant at growth temperatures between 100 and 250 °C. At typical growth conditions, pure ZnO thin films were obtained without any detectable carbon contamination. For comparison of key film properties including microstructure and chemical and electrical properties, ZnO films were also prepared by rf sputtering at room temperature. The microstructure analyses by X-ray diffraction have shown that both of the ALD and sputtered ZnO thin films have (002) preferred orientation. At low growth temperature T_s ≤ 125 °C, ALD ZnO films have high resistivity (> 10 Ω cm) with small mobility (< 3 cm²/V s), while the ones prepared at higher temperature have lower resistivity (< 0.02 Ω cm) with higher mobility (> 15 cm²/V s). Meanwhile, sputtered ZnO films have much higher resistivity than ALD ZnO at most of the growth conditions studied. Based upon the experimental results, the electrical properties of ZnO thin films depending on the growth conditions for application as an active channel layer of TFT were discussed focusing on the comparisons between ALD and sputtering.     

Effect of post-annealing on the optoelectronic properties of ZnO:Ga films prepared by pulsed direct current magnetron sputtering

In this study, highly conductive films of ZnO:Ga (GZO) were deposited by pulsed direct current magnetron sputtering to explore the effect of post-annealing on the structural, electrical and optical properties of the films. XRD patterns showed that after annealing, the intensity of c-axis preferentially oriented GZO (002) peak was apparently improved. GZO film annealing at 300 °C for 0.5 h exhibits lowest resistivity of 1.36 × 10^− 4 Ω cm. In addition, the film shows good optical transmittance of 88% with optical band gap, 3.82 eV. Carrier concentration and optical band gap both decreases with the annealing temperature. Besides, the near-infrared transmittance at 1400 nm is below 5%, while the reflectivity at 2400 nm is as high as 70%.     

Transparent conducting Al and Y codoped ZnO thin film deposited by DC sputtering

Transparent conducting Al and Y codoped zinc oxide (AZOY) thin films with high transparency and low resistivity were deposited by DC magnetron sputtering. The effects of substrate temperature on the structural, electrical and optical properties of AZOY thin films deposited on glass substrates have been investigated. X-ray diffraction spectra indicate that no diffraction peak of Al₂O₃ or Y₂O₃ except that of ZnO (0 0 2) is observed. The AZOY thin film prepared at substrate temperature of 250 °C has the optimal crystal quality inferring from FWHM of ZnO (0 0 2) diffraction peak, but the AZOY thin film deposited at 300 °C has the lowest resistivity of 3.6 × 10⁻⁴ Ω-cm, the highest mobility of 30.7 cm² V⁻¹ s⁻¹ and the highest carrier concentration of 5.6 × 10²⁰ cm⁻³. The films obtained have disorderly polyhedral surface morphology indicating possible application in thin film solar cell with good quality and high haze factor without the need of post-deposition etching.     

Effects of sputtering power and pressure on properties of ZnO:Ga thin films prepared by oblique-angle deposition

The effects of power and pressure on radiofrequency (RF) diode sputtering in oblique-angle (80°) deposition arrangement are presented. Oblique-angle sputtering of ZnO:Ga (GZO) thin films resulted in a tilted columnar crystalline structure and inclination of the c-axis by an angle of approximately 9° with respect to the substrate. This improved their structural, electrical and optical properties in comparison with films deposited perpendicularly to the substrate. GZO films sputtered by an RF power of 600 W at room temperature of the substrate in Ar pressure 1.3 Pa showed strong crystalline (002) texture, lowest electrical resistivity 3.4 × 10^− 3 Ωcm, highest electron mobility 10 cm² V^− 1 s^− 1, high electron concentration 1.8 × 10²⁰ cm^− 3 and good optical transparency up to 88%. The small inclination angle of the film structure is caused by the high kinetic energy of sputtered species and additional energetic particle bombardment causes random surface diffusion, which is suppressing the shadow effect produced by oblique-angle sputtering.     

Influence of annealing treatments for ZnO-doped Zr0.8Sn0.2TiO4 thin films by RF magnetron sputtering

Zirconium tin titanium oxide doped 1 wt.% ZnO thin films on n-type Si substrate were deposited by rf magnetron sputtering at a fixed rf power of 300 W, a substrate temperature of 450 °C, a deposition pressure of 5 mTorr and an Ar/O₂ ratio of 100/0 with various annealing temperatures and annealing times. Electrical properties and microstructures of 1 wt.% ZnO-doped (Zr_0.8Sn_0.2)TiO₄ thin films prepared by rf magnetron sputtering on n-type Si(100) substrates at different annealing temperatures (500 °C-700 °C) and annealing times (2 h-6 h) have been investigated. The structural and morphological characteristics analyzed by X-ray diffraction (XRD) and atomic force microscope (AFM) were sensitive to the treatment conditions such as annealing temperature and annealing time. At an annealing temperature of 600 °C and an annealing time of 6 h, the ZnO-doped (Zr_0.8Sn_0.2)TiO₄ thin films possess a dielectric constant of 46 (at f = 10 MHz), a dissipation factor of 0.059 (at f = 10 MHz), and a low leakage current density of 3.8 × 10^− 9 A/cm² at an electrical field of 1 kV/cm.     

Room temperature deposition of Al-doped ZnO films on quartz substrates by radio-frequency magnetron sputtering and effects of thermal annealing

High-quality Al-doped zinc oxide (AZO) thin films have been deposited on quartz substrates by radio-frequency magnetron sputtering at room temperature for thin film solar cell applications as transparent conductive oxide (TCO) electrode layers. Effects of post-deposition annealing treatment in pure nitrogen and nitrogen/hydrogen atmosphere have been investigated. Annealing treatments were carried out from 300 °C to 600 °C for compatibility with typical optoelectronic device fabrication processes. A series of characterization techniques, including X-ray diffraction, scanning electron microscopy, Hall, optical transmission, and X-ray photoelectron spectroscopy has been employed to study these AZO materials. It was found that there were significant changes in crystallinity of the films, resistivity increased from 4.60 × 10^− 4 to 4.66 × 10^− 3 Ω cm and carrier concentration decreased from 8.68 × 10²⁰ to 2.77 × 10²⁰ cm^− 3 when annealing in 400 °C pure nitrogen. Whereas there were no significant changes in electrical and optical properties of the AZO films when annealing in 300-500 °C nitrogen/hydrogen atmosphere, the electrical stability of the AZO films during the hydrogen treatment is attributed to both desorption of adsorbed oxygen from the grain boundaries and production of additional oxygen vacancies that act as donor centers in the films by removal of oxygen from the ZnO matrix. These results demonstrated that the AZO films are stably suited for TCO electrodes in display devices and solar cells.     

The influence of annealing temperature on the structural, electrical and optical properties of ion beam sputtered CuInSe2 thin films

CuInSe₂ (CIS) thin films were prepared by ion beam sputtering deposition of copper layer, indium layer and selenium layer on BK7 glass substrates followed by annealing at different temperatures for 1 h in the same vacuum chamber. The influence of annealing temperature (100-400 °C) on the structural, optical and electrical properties of CIS thin films was investigated. X-ray diffraction (XRD) analysis revealed that CIS thin films exhibit chalcopyrite phase and preferential (112) orientation when the annealing temperature is over 300 °C. Both XRD and Raman show that the crystalline quality of CIS thin film and the grain size increase with increasing annealing temperature. The reduction of the stoichiometry deviation during the deposition of CIS thin films is achieved and the elemental composition of Cu, In and Se in the sample annealed at 400 °C is very near to the stoichiometric ratio of 1:1:2. This sample also has an optical energy band gap of about 1.05 eV, a high absorption coefficient of 10⁵ cm⁻¹ and a resistivity of about 0.01 Ω cm.     

Effect of thermal annealing treatment on structural, electrical and optical properties of transparent sol-gel ZnO thin films

Effect of thermal annealing in different ambients on the structural, electrical and optical properties of the sol-gel derived ZnO thin films are studied. XRD results show that the annealed ZnO films with wurtzite structure are randomly oriented. Crystallite size, carrier concentration, resistivity and mobility are found to be dependent on the annealing temperature. The change in carrier concentration is discussed with respect to the removal of adsorbed oxygen from the grain boundaries. The highest carrier concentration and lowest resistivity are 8 × 10¹⁸ cm⁻³ and 2.25 × 10⁻¹ Ω cm, respectively, for the film annealed at 500 °C in vacuum. The annealed films are highly transparent with average transmission exceeding 80% in the wavelength region of 400-800 nm. In all three ambients, the optical band gap value does not change much below 500 °C temperature while above this temperature band gap value decreases for nitrogen and air and increases for vacuum.     

Stable p-type conductivity and enhanced photoconductivity from nitrogen-doped annealed ZnO thin film

We report on the growth of p-type ZnO thin films with improved stability on various substrates and study the photoconductive property of the p-type ZnO films. The nitrogen doped ZnO (N:ZnO) thin films were grown on Si, quartz and alumina substrates by radio frequency magnetron sputtering followed by thermal annealing. Structural studies show that the N:ZnO films possess high crystallinity with c-axis orientation. The as-grown films possess higher lattice constants compared to the undoped films. Besides the high crystallinity, the Raman spectra show clear evidence of nitrogen incorporation in the doped ZnO lattice. A strong UV photoluminescence emission at ~ 380 nm is observed from all the N:ZnO thin films. Prior to post-deposition annealing, p-type conductivity was found to be unstable at room temperature. Post-growth annealing of N:ZnO film on Si substrate shows a relatively stable p-type ZnO with room temperature resistivity of 0.2 Ω cm, Hall mobility of 58 cm²/V s and hole concentration of 1.95 × 10¹⁷ cm^− 3. A homo-junction p-n diode fabricated on the annealed p-type ZnO layer showed rectification behavior in the current-voltage characteristics demonstrating the p-type conduction of the doped layer. Doped ZnO films (annealed) show more than two orders of magnitude enhancement in the photoconductivity as compared to that of the undoped film. The transient photoconductivity measurement with UV light illumination on the doped ZnO film shows a slow photoresponse with bi-exponential growth and bi-exponential decay behaviors. Mechanism of improved photoconductivity and slow photoresponse is discussed based on high mobility of carriers and photodesorption of oxygen molecules in the N:ZnO film, respectively.     

Effect of deposition parameters and annealing temperature on the structure and properties of Al-doped ZnO thin films

Transparent conductive films of Al-doped ZnO (AZO) were deposited onto inexpensive soda-lime glass substrates by radio frequency (rf) magnetron sputtering using a ZnO target with an Al content of 3 wt%. The Taguchi method with a L₉ orthogonal array, signal-to-noise (S/N) ratio and analysis of variance (ANOVA) were employed to examine the performance characteristics of the coating operations. This study investigated the effect of the deposition parameters (rf power, sputtering pressure, thickness of AZO films, and substrate temperature) on the electrical, structural, morphological and optical properties of AZO films. The grey-based Taguchi method showed the electrical resistivity of AZO films to be about 9.15 × 10⁻³ Ω cm, and the visible range transmittance to be about 89.31%. Additionally, the films were annealed in a vacuum ambient (5.0 × 10⁻⁶ Torr) at temperatures of 400, 450, 500 and 600 °C, for a period of 30 min. It is apparent that the intensity of the X-ray peaks increases with annealing treatment, leading to improved crystallinity of the films. By applying annealing at 500 °C in a vacuum ambient for 30 min, the AZO films show the lowest electrical resistivity of 2.31 × 10⁻³ Ω cm, with about 90% optical transmittance in the visible region and a surface roughness of Ra = 12.25 nm.     

The effect of annealing on Al-doped ZnO films deposited by RF magnetron sputtering method for transparent electrodes

In this study, transparent conducting Al-doped zinc oxide (AZO) films with a thickness of 150 nm were prepared on Corning glass substrates by the RF magnetron sputtering with using a ZnO:Al (Al₂O₃: 2 wt.%) target at room temperature. This study investigated the effects of the post-annealing temperature and the annealing ambient on the structural, electrical and optical properties of the AZO films. The films were annealed at temperatures ranging from 300 to 500 °C in steps of 100 °C by using rapid thermal annealing equipment in oxygen. The thicknesses of the films were observed by field emission scanning electron microscopy (FE-SEM); their grain size was calculated from the X-ray diffraction (XRD) spectra using the Scherrer equation. XRD measurements showed the AZO films to be crystallized with strong (002) orientation as substrate temperature increases over 300 °C. Their electrical properties were investigated by using the Hall measurement and their transmittance was measured by UV-vis spectrometry. The AZO film annealed at the 500 °C in oxygen showed an electrical resistivity of 2.24 × 10^− 3 Ω cm and a very high transmittance of 93.5% which were decreased about one order and increased about 9.4%, respectively, compared with as-deposited AZO film.     

Activation of p-type conduction in ZnO:N films by annealing in atomic oxygen

ZnO:N epitaxial films have been grown by reactive magnetron sputtering. The effect of annealing in atomic oxygen on the structural and electrical properties of the ZnO:N films has been studied by X-ray diffraction, atomic force microscopy, Hall effect measurements, and X-ray photoelectron spectroscopy. By annealing at temperatures from 500 to 700°C, we have obtained p-type ZnO:N films with a resistivity of ～57 Ω cm, hole mobility of ～2.7 cm²/(V s), and hole concentration of ～6.8 × 10¹⁷ cm^?3. X-ray photoelectron spectroscopy results suggest that the p-type conductivity of the films is due to a decrease in the concentration of (N₂)_O and V _O donors.     

Reproducibility and stability of N–Al codoped p-type ZnO thin films

Reproducible and stable p-type ZnO thin films have been prepared by the N–Al codoping method. Secondary ion mass spectroscopy measurements demonstrate that N and Al are incorporated into ZnO. The resistivity, carrier concentration, and Hall mobility are typically of 50–100 Ωcm, 1×10¹⁷–8×10¹⁷ cm⁻³, and 0.1–0.6 cm²/Vs, respectively, for the N–Al codoped p-type ZnO films. Hall measurement, X-ray diffraction, and optical transmission were carried out to investigate the changes of the properties with the storage period. Results show that the p-type characteristics of the N–Al codoped ZnO films are of acceptable reproducibility and stability. In addition, the N–Al codoped p-type ZnO films have good crystallinity and optical quality. The properties are time independent.     

Multifunctional ZnO:V thin films deposited by rf-magnetron sputtering from aerogel nanopowder target material

ZnO:V thin films have been grown onto suprasil substrates by rf-magnetron sputtering at room temperature using nanocrystalline powder synthesized by modified sol-gel method. In our approach the water for hydrolysis used in the synthesis of nanopowder was slowly released by esterification reaction followed by a thermal drying in ethyl alcohol at 250 °C. The effects of V concentration on structural, electrical, morphological and optical properties were studied. The as-deposited films with a thickness of about 0.4 μm were polycrystalline with a hexagonal wurtzite structure and preferentially oriented in the (002) crystallographic direction. The films present high optical transmittance in the visible range of approximately 90%, carrier concentration of about 10²⁰ cm^− 3 and electrical resistivity of 10^− 3 Ω cm at room temperature. In the as-prepared state the films also present ferromagnetic properties attributed to the presence of vanadium based secondary phases.     

p-type doping of ZnO by means of high-density inductively coupled plasmas

A custom-designed inductively coupled plasma assisted radio-frequency magnetron sputtering deposition system has been used to fabricate N-doped p-type ZnO (ZnO:N) thin films on glass substrates from a sintered ZnO target in a reactive Ar + N₂ gas mixture. X-ray diffraction and scanning electron microscopy analyses show that the ZnO:N films feature a hexagonal crystal structure with a preferential (002) crystallographic orientation and grow as vertical columnar structures. Hall effect and X-ray photoelectron spectroscopy analyses show that N-doped ZnO thin films are p-type with a hole concentration of 3.32 × 10¹⁸ cm^− 3 and mobility of 1.31 cm² V^− 1 s^− 1. The current-voltage measurement of the two-layer structured ZnO p-n homojunction clearly reveals the rectifying ability of the p-n junction. The achievement of p-type ZnO:N thin films is attributed to the high dissociation ability of the high-density inductively coupled plasma source and effective plasma-surface interactions during the growth process.