YVO4∶Eu3+,Bi3+红色荧光粉的水热合成及其荧光性能

以Y₂O₃、Eu₂O₃、Bi(NO₃)₃·H₂O、浓HNO₃、偏钒酸铵、氨水、无水乙醇和一缩二乙二醇为原料,采用聚乙烯吡咯烷酮(PVP)辅助水热法合成YVO₄: Eu³⁺, Bi³⁺纳米颗粒。使用X射线衍射(XRD)、扫描电镜(SEM)、红外光谱(IR)和荧光光谱(FL)等手段对产品进行了表征和分析。结果表明：合成的样品为YVO₄: Eu³⁺, Bi³⁺纳米颗粒,均具有四方晶相结构,其微结构随反应溶液的的pH值变化。YVO₄: Eu³⁺, Bi³⁺纳米颗粒在619 nm处有较强的红光发射(电偶极跃迁⁵D₀→⁷F₂),在594 nm有较弱的橙光发射(磁偶极跃迁⁵D₀→⁷F₁)。随着Eu/Bi比值的增大材料的荧光先增强后减弱,在Eu/Bi比值为5时样品的红光发射最强。溶液的pH值影响YVO₄: Eu³⁺, Bi³⁺纳米晶的发光强度,其中pH值为10时的样品其红光发射最强。并探讨了YVO₄: Eu³⁺, Bi³⁺纳米晶的发光机理。     

YVO4:Eu3+@YPO4纳米核壳结构荧光粉的水热合成及表征

为了提高传统YVO₄:Eu³⁺荧光粉的发光效率及稳定性, 采用水热法制备合成了YVO₄:Eu³⁺@YPO₄纳米核壳结构荧光粉, 通过X射线衍射仪(XRD)、透射电镜(TEM)和荧光光谱仪(PL)等测试手段对所得样品进行表征. XRD和TEM测试结果表明: 由水热法合成的YVO₄:Eu³⁺@YPO₄荧光粉包含YVO₄:Eu³⁺核心和YPO₄壳层两种结构, 荧光粉粒径为10~30 nm, 壳厚为5~10 nm, 形态规则、粒径均匀、结晶度高; 荧光光谱测试结果表明: YVO₄:Eu³⁺@YPO₄荧光粉比单纯YVO₄:Eu³⁺荧光粉的发光效率高出66.75%, 且具有较高的色纯度. 结合第一性原理方法, 对YVO₄和YPO₄晶体的能带结构进行理论计算, 定性说明了电子跃迁和发光的关系.     

Preparation of Eu: YVO4 red and Ce, Tb: LaPO4 green phosphors by hydrolyzed colloid reaction (HCR) technique

Eu³⁺: YVO₄ red and Ce³⁺, Tb³⁺: LaPO₄ green phosphors were prepared by newly discovered hydrolized colloid reaction (HCR) technique at low temperature (< 100 °C) and atmospheric pressure utilizing subsequent calcining and reductive treatments, respectively. The incorporation of activators (Eu³⁺ and Ce³⁺, Tb³⁺) in these very porous powders was checked by X-ray diffraction (XRD), scanning electron microscopy (SEM) and luminescence investigations.     

Preparation and photoluminescence properties of Eu-doped Ga2O3 nanorods

GaOOH:Eu³⁺ nanorods with different aspect ratios were prepared by hydrothermal method at 140 °C. - and β-Ga₂O₃:Eu³⁺ were converted from as-prepared GaOOH:Eu³⁺ particles by calcination at 500 and 850 °C, respectively. The products were characterized with X-ray diffraction (XRD), transmission electron microscope (TEM) and photoluminescence (PL). Results show that solution pH values play a key role in the formation of the GaOOH:Eu³⁺ powders with different morphologies and - and β-Ga₂:Eu³⁺ inherit the morphology of GaOOH:Eu³⁺ exactly. The photoluminescence characteristics of β-Ga₂O₃:Eu³⁺ were also investigated. Experimental results reveal that the color purity of β-Ga₂O₃:Eu³⁺ nanorods with high aspect ratio is enhanced in comparison with β-Ga₂O₃:Eu³⁺ nanorods with low aspect ratio.     

紫外光激发Ce3+掺YVO4蓝光发射性能研究

利用提拉法生长了YVO₄和掺2.0at% CeO₂(或Ce₂(CO₃)₃)的YVO₄: Ce³⁺晶体。样品的XRD测试表明Ce³⁺代替Y³⁺进入晶格, Ce³⁺的加入并没有影响YVO₄的晶格结构。XPS测试显示YVO₄: Ce³⁺晶体中Ce离子3d分裂为882.0、885.8、902.9、908.0和915.9 eV等5个峰, 峰位表明样品中铈离子是以Ce³⁺和Ce⁴⁺两种价态形式存在。YVO₄和YVO₄: Ce³⁺激发谱都呈现出260~360 nm宽带激发, 此激发带源于基质中VO₄^3-离子团的配体O到V的电荷迁移吸收。使用325 nm的紫外线激发时, 两种样品均可发出以440 nm 为中心的宽带蓝光,其中YVO₄发射峰应归属于VO₄^3-离子团中³T₂→¹A₁和³T₁→¹A₁跃迁; 而YVO₄: Ce³⁺的蓝光发射则来源于Ce³⁺的5d→4f 的跃迁。分析可知YVO₄: Ce³⁺中VO₄^3-的π轨道和Ce³⁺的电子波函数能有效地重叠, 使得VO₄^3-和Ce³⁺可通过交换作用有效地向Ce³⁺传递能量, 可大幅提高Ce³⁺的蓝光发射强度。实验结果显示YVO₄: Ce³⁺可作为UV-LED管芯激发的白光发光二极管用高亮度蓝色发光材料。     

Synthesis and the luminescent properties of europium-activated Ca2SnO4 phosphors

The synthesis and photoluminescent (PL) properties of calcium stannate crystals doped with europium grown by mechanically activated in a high energy vibro-mill have been investigated. The characteristics of Ca₂SnO₄:Eu³⁺ phosphors were found to depend on the amounts of europium ions. The XRD profiles revealed that the system, (Ca_1−xEu_x)₂SnO₄, could form stable solid solutions in the composition range of x = 0–7% after being calcined at 1200 °C. The calcined powders emit bright red luminescence centered at 618 nm due to ⁵D₀ → ⁷F₂ electric dipole transition. Both XRD data and the emission ratio of (⁵D₀ → ⁷F₂)/(⁵D₀ → ⁷F₁) reveal that the site symmetry of Eu³⁺ ions decreases with increasing doping concentration. The maximum PL intensity has been obtained for 7 mol% concentration of Eu³⁺ in Ca₂SnO₄.     

Long lasting phosphorescence of Sr4Al14O25:Eu,Dy thin films by magnetron sputtering

This paper reports the preparation process and the long lasting phosphorescence of the Sr₄Al₁₄O₂₅:Eu²⁺,Dy³⁺ thin films obtained by magnetron sputtering. Phosphorescence was achieved by annealing the films in reducing atmosphere. Sr₄Al₁₄O₂₅ thin film was obtained when the films were treated at 1200 °C, while SrAl₂O₄ was generated as the intermediate phase during the annealing process. Sr₄Al₁₄O₂₅:Eu²⁺,Dy³⁺ film generated an emission at 485 nm, and SrAl₂O₄:Eu²⁺,Dy³⁺ film showed an emission peaking at 515 nm. Afterglow characteristics were observed for both films, and Sr₄Al₁₄O₂₅:Eu²⁺,Dy³⁺ film showed a better afterglow property than the SrAl₂O₄:Eu²⁺,Dy³⁺ film due to a deeper trap level and a higher trap concentration formed in the thin films.     

柔性Eu3+掺杂SiO2纳米纤维薄膜的制备及其发光性能

采用溶胶-凝胶法结合静电纺丝技术制备了柔性Eu³⁺掺杂SiO₂纤维薄膜, 采用SEM、XRD、FT-IR、TG和PL等测试方法对材料进行表征。Eu³⁺掺杂SiO₂纤维薄膜在热处理后纤维直径变小, 纤维表面平滑无粘连。通过控制升温速度, 纤维薄膜经热处理后仍具有较高的力学强度, 750℃热处理后其拉伸强度可达4.31 MPa, 经过多次弯曲仍能保持原样。在392.6 nm光源激发下, Eu³⁺掺杂SiO₂纤维薄膜在570~670 nm附近呈现出来自于⁵D₀→⁷F_J的发射峰。当Eu³⁺掺杂浓度为8mol%时, 经过750℃热处理后Eu³⁺掺杂SiO₂纤维薄膜的发光强度达到最大值。     

Effect of heat treatment on photoluminescence behavior of BaMgAl10O17:Eu phosphors

The blue phosphor of BaMgAl₁₀O₁₇:Eu²⁺ (BAM) powders were prepared by solid-state reaction. The thermal degradation of BAM phosphor significantly reduces the intensity of the blue emission. BAM is reduced by an amount of 50% after heating at around 800 °C for 1 h. Photoluminescence (PL) excitation and emission spectra showed that the blue emission of 450 nm peak decreased with increasing annealing temperature. The ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transition of Eu³⁺ were observed at 590 and 615 nm emission lines over 1100 °C. Electron paramagnetic resonance (EPR) spectrum also detected two signals of Eu²⁺, corresponding to g=3.7156(9) for 88 mT, and g=2.9507(9) for 133 mT. X-ray absorption near edge structure (XANES) spectrum decreased the intensity of Eu²⁺ for 6977 eV with increasing annealing temperature, while high-energy peak of Eu³⁺ for 6984 eV was increased. The combined use of X-ray and neutron data by the Rietveld refinement appears to support that the secondary phase of EuMgAl₁₁O₁₉ magnetoplumbite structure in BAM may be formed by heat treatment.     

Sr2Si5N8:Eu2+荧光粉的制备及其发光性能研究

以Sr₂CO₃、Si₃N₄和Eu₂O₃为原料, 以C为主要还原剂, 采用碳热还原氮化工艺合成Sr₂Si₅N₈:Eu²⁺荧光粉, 着重研究了C、Sr₂CO₃添加量及Eu²⁺浓度对产物物相及发光性能的影响。研究结果表明: 当C与Si₃N₄的摩尔比 n_c/=9/5时,合成出Sr₂Si₅N₈:Eu²⁺单相荧光粉, 添加适当过量的Sr₂CO₃可提高合成产物的N含量, 且荧光粉的发光强度与其N含量呈现正相关关系。在450 nm蓝光激发下, 受Eu²⁺的4f⁶5d¹ → 4f⁷跃迁作用, Sr₂Si₅N₈:Eu²⁺荧光粉在550~700 nm波段范围产生非对称宽带发射。随着Eu²⁺掺杂浓度由1.5mol%增加到20mol%, 荧光粉的发光强度先增强后减弱, 达到2mol%时发生浓度淬灭现象; 发射主峰由608 nm逐步红移至641 nm; CIE色坐标从(0.606, 0.393)位移至(0.656, 0.343), 是一种可用于白光LED的优质红色荧光粉。     

Improved optical photoluminescence by charge compensation in the phosphor system CaMoO4:Eu

It has been found that charge compensated CaMoO₄:Eu³⁺ phosphors show greatly enhanced red emission under 393 and 467 nm-excitation, compared with CaMoO₄:Eu³⁺ without charge compensation. Two approaches to charge compensation, (a) 2Ca²⁺ → Eu³⁺ + M⁺, where M⁺ is a monovalent cation like Li⁺, Na⁺ and K⁺ acting as a charge compensator; (b) 3Ca²⁺ → 2Eu³⁺ + vacancy, are investigated. The influence of sintering temperature and Eu³⁺ concentration on the luminescent property of phosphor samples is also discussed.     

Sensitized luminescence and energy transfer in Ce and Eu codoped calcium magnesium chlorosilicate

Ce³⁺ and Eu²⁺ ions codoped calcium magnesium chlorosilicate [Ca₈Mg(SiO₄)₄Cl₂] phosphors have been synthesized and characterized. Intense bluish-green light was observed under ultraviolet and blue light excitations. The diffuse reflection, excitation and emission spectra of Ca₈Mg(SiO₄)₄Cl₂:Ce³⁺,Eu²⁺ were measured at room temperature, and enhancement of Eu²⁺ emission was confirmed. The fluorescence lifetimes of Ce³⁺ were measured, and the mechanism of nonradiative energy transfer from Ce³⁺ to Eu²⁺ is found to be electric dipole–dipole interaction. The probabilities and efficiencies of nonradiative energy transfer were also calculated, and the results indicate that the efficiency can be as high as 86% in this material system.     

Eu2+/Tb3+掺杂的Sr2Si5N8基荧光粉的制备与发光性能

采用碳热还原氮化法合成了Eu²⁺/Tb³⁺掺杂的Sr₂Si₅N₈基荧光粉, 并重点研究了Tb³⁺-Eu²⁺共掺时Sr₂Si₅N₈基荧光粉的发光性能。研究结果表明: 由于Tb³⁺的f → d间的跃迁是自旋允许的, Sr₂Si₅N₈:Tb³⁺在330 nm激发光下, 在490、543、585和623 nm四处各有一发射峰, 它们分别来源于Tb³⁺的⁵D₄ → ⁷F_j (j = 6、5、4、3)能级跃迁; 掺入Tb³⁺对Sr_1.96Si₅N₈:0.04Eu²⁺的激发谱和发射谱的形状及峰位无明显影响, 当共掺离子Tb³⁺浓度为x = 0.01时, 样品发射强度比未共掺的Sr_1.96Si₅N₈:0.04Eu²⁺提高了约20%, Tb³⁺主要通过电多极能量传递的方式转向Eu²⁺。     

Nanosized strontium aluminate phosphors prepared via a reverse microemulsion route

Nanosized strontium aluminate phosphors co-activated by Eu²⁺ and Dy³⁺ were prepared via a novel reverse microemulsion process. This new synthesis technique lowered the synthesis temperature of SrAl₂O₄: Eu²⁺, Dy³⁺ phosphors to as low as 900 °C, and also reduced the particle size to the nanometer scale (around 40 nm). In the microemulsion process, the constituent cations were trapped by numerous nano-scaled micelles, leading to a shortening of the inter-diffusion length and enhancement of the precursor reactivity. The excitation intensity and emission peaks of nanosized SrAl₂O₄: Eu²⁺, Dy³⁺ phosphors significantly increased with increasing heating temperatures.     

紫外激发蓝色荧光粉Sr2-x-yB5O9Cl:xEu2+,yTb3+的合成和发光性能

采用高温固相反应法合成Sr_2-x-yB₅O₉Cl:xEu²⁺,yTb³⁺蓝色荧光粉。用X射线衍射表征材料的晶体结构、用荧光光谱仪测定Eu²⁺和Tb³⁺的掺杂浓度,研究了助溶剂H₃BO₃过量浓度和反应温度对荧光粉发光性质的影响。结果表明,单掺杂Eu²⁺时,其浓度猝灭机理为电偶极-电偶极交互作用机制,浓度猝灭临界距离为R_C=1.71 nm。在紫外（230-410 nm）波段有强而宽的吸收带,表明此粉是一种近紫外白光LED用的蓝色荧光粉。     

Preparation, patterning and luminescent properties of nanocrystalline Gd2O3:A (A=Eu, Dy, Sm, Er) phosphor films via Pechini sol–gel soft lithography

Nanocrystalline Gd₂O₃:A (A=Eu³⁺, Dy³⁺, Sm³⁺, Er³⁺) phosphor films and their patterning were fabricated by a Pechini sol–gel process combined with a soft lithography. X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) and optical microscopy, UV/vis transmission and photoluminescence (PL) spectra as well as lifetimes were used to characterize the resulting films. The results of XRD indicated that the films began to crystallize at 500 °C and that the crystallinity increased with the elevation of annealing temperatures. Uniform and crack free non-patterned phosphor films were obtained by optimizing the composition of the coating sol, which mainly consisted of grains with an average size of 70 nm and a thickness of 550 nm. Using micro-molding in capillaries technique, we obtained homogeneous and defects-free patterned gel and crystalline phosphor films with different stripe widths (5, 10, 20 and 50 μm). Significant shrinkage (50%) was observed in the patterned films during the heat treatment process. The doped rare earth ions (A) showed their characteristic emission in crystalline Gd₂O₃ phosphor films due to an efficient energy transfer from Gd₂O₃ host to them. Both the lifetimes and PL intensity of the rare earth ions increased with increasing the annealing temperature from 500 to 900 °C, and the optimum concentrations for Eu³⁺, Dy³⁺, Sm³⁺, Er³⁺ were determined to be 5, 0.25, 1 and 1.5 mol% of Gd³⁺ in Gd₂O₃ films, respectively.     

——————————CaSi2O2N2:Eu2+中空荧光纤维的制备及其发光性能研究

采用静电纺丝与气相还原氮化相结合的方式制备了用于白光LED的CaSi₂O₂N₂:Eu²⁺荧光纤维。通过调节纺丝溶液溶剂的配比, 得到了空心结构的Ca-Si-O-Eu纳米纤维和CaSi₂O₂N₂:Eu²⁺荧光纳米纤维。样品在微观上保持中空纤维结构, 宏观上也保持薄膜的状态。利用X射线衍射对样品物相结构进行分析, Ca-Si-O-Eu中空纤维在1300℃保温5 h后得到层状结构的CaSi₂O₂N₂, Eu²⁺离子的掺入没有改变CaSi₂O₂N₂的主晶相。在400 nm激发光照射下CaSi₂O₂N₂:Eu²⁺荧光纤维在550 nm附近具有一个宽发射峰, 对应着Eu²⁺离子4f⁶5d→4f⁷跃迁。与CaSi₂O₂N₂:Eu²⁺荧光粉或普通荧光纤维膜比较, 制备的中空荧光纤维膜有更高的发射光强度。     

Ba3Gd(PO4)3:Eu3+荧光粉的合成及发光性质

采用高温固相反应法合成了不同Eu³⁺掺杂浓度的Ba₃Gd(PO₄)₃荧光粉。利用X射线衍射对产生的晶体结构进行了分析, 证实产物为纯相, Eu³⁺的引入没有导致晶体结构的改变。利用Van Uitert模型对⁵D₀能级荧光的浓度猝灭行为进行了研究, 发现浓度猝灭是由于Eu³⁺间交换相互作用所导致。分析了⁵D₀荧光发射的温度依赖, 给出了荧光温度猝灭行为符合横向穿越模型, 并通过非线性拟合获得了激活能。利用Eu³⁺的发射光谱和荧光衰减数据, 计算了⁵D₀→⁷F_J辐射跃迁速率及荧光分支比, 同时得到了光学跃迁强度参数。     

三基色镍基自敏复合涂层的制备及其性能研究

检测耐腐蚀涂层在腐蚀环境下的完整性, 对预测涂层工作寿命至关重要。通过电化学沉积法成功地将三基色无机荧光颗粒: BaMgAl₁₁O₁₇: Eu²⁺(蓝粉), Y₂O₃: Eu³⁺(红粉), CeMgAl₁₁O₁₉: Tb³⁺(绿粉)与金属镍复合, 在瓦特光亮镀镍浴中沉积出具有三基色指示功能的镍基自敏复合涂层。采用X射线衍射(XRD)、扫描电镜(SEM)、表面轮廓仪、维氏硬度计、荧光发射光谱和电化学测试手段分别对涂层组织形貌结构、润湿性、沉积率、硬度、发光性能及自敏性能进行了检测, 结果表明, 阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)和非离子表面活性剂聚乙二醇(PEG)可以有效提高三基色荧光粒子沉积率。三种荧光粒子与金属镍之间表现出不同的润湿性和匹配性, 使得其在镍基复合涂层中具有不同的作用: Y₂O₃: Eu³⁺荧光粒子改变了涂层结晶取向, 且使晶粒细化, BaMgAl₁₁O₁₇: Eu²⁺使涂层组织呈现节瘤状, Y₂O₃: Eu³⁺和CeMgAl₁₁O₁₉: Tb³⁺粒子明显提高了涂层硬度。三基色荧光粒子在腐蚀前后表现出不同的发光特性, 可以有效指示出涂层工作周期内的完整性, 起到良好的自敏检测作用。     

Combustion synthesis of borate phosphors

A fast and simple method of preparation, based on the combustion synthesis, is described for the synthesis of borate based PL phosphors which can be used for commercial lamp applications. Phosphors with various structures, incorporating different activators could be successfully prepared. PL intensities of (Gd_0.6Ce_0.2Tb_0.2)MgB₅O₁₀, SrB₄O₇:Eu²⁺ and La_0.88Gd_0.1Bi_0.02B₃O₆ were found to be comparable with those of the corresponding commercial phosphors.