Polymer electrolyte with large temperature-dependent conductivity for novel electrochromic imaging

Novel polymer electrolyte aimed for space-selective electrochromic imaging was prepared with poly(vinylbutyral) (PVB), poly(ethyleneglycole) (PEG2000) and tetrabutylammonium perchlorate (TBAP). A spreading of the electrochromic image is a shortcoming when the electrochromic image is space-selectively formed by electrochemical reaction. This is due to a cell formation between colored and uncolored parts through ionic conductor. In order to inhibit the spreading, it would be effective to apply a polymer electrolyte with very low ionic conductivity at room temperature to the imaging system. On this basis, the present electrolyte was designed to have large difference in ionic conductivity between high and low temperatures. Namely, this polymer electrolyte enables writing and erasing at high temperature due to high ionic conductivity, and the image is expected to be preserved without change at ambient temperature due to very low ionic conductivity. The thermal and conductive properties of the polymer electrolyte were analyzed. Further, space-selective electrochromic image was formed on the device with the present polymer electrolyte at 100 °C, and was revealed to be stable without change for more than a week when the device was kept at 20 °C.     

Application of poly(acrylic acid-g-gelatin)/polypyrrole gel electrolyte in flexible quasi-solid-state dye-sensitized solar cell

A novel gel polymer electrolyte based on poly(acrylic acid-g-gelatin)/polypyrrole with conductivity of 14.1 mS cm⁻¹ was prepared. Based on the gel electrolyte, a flexible quasi-solid-state dye-sensitized solar cell was fabricated by using a low-temperature filming technique. Owing to high conductivity and the catalytic function of polypyrrole for I⁻/I₃⁻ redox reaction for the gel electrolyte, the flexible quasi-solid-state dye-sensitized solar cell showed a light-to-electric energy conversion efficiency of 1.28%, under a simulated solar light irradiation with intensity of 100 mW cm⁻² (AM 1.5).     

An approach to laminated flexible Dye sensitized solar cells

We have built TiO₂ Dye sensitized solar cells (DSSCs) that combined flexible TiO₂ photoanodes coated on ITO/PET substrates with a gel electrolyte based on PVDF-HFP-SiO₂ films. Titanium isopropoxide (TiP₄) was used as additive to TiO₂ nanoparticles for increasing power conversion efficiency in Dye sensitized solar cell electrodes prepared at low-temperature (130 °C). An efficiency η_AM1.5G = 3.55% on ITO/PET substrates is obtained at 48 mW/cm² illumination with a standard liquid electrolyte based on methoxypropionitrile. Among several solvents forming gels with PVDF-HFP-SiO₂, N-methyl (pyrrolidone) (NMP) was found to enable the most stable devices. A power conversion efficiency η_AM1.5G = 2% was obtained under 10 mW/cm² with flexible TiO₂-ITO-PET photoanodes and the PVDF-HFP-SiO₂ + NMP gel electrolyte.     

Ionic liquids in electrochromic devices

The ionic liquid (PYR₁₄TFSI) has proved to be the key material to make a Li-ion conducting element of a complete electrochromic device, when interposed between transparent film electrodes like WO₃ and Li-charged V₂O₅. The key features of this ionic liquid and its mixtures with LiTFSI are the excellent transparency in the visible and NIR optical regions, the good ionic conductivity and the electrochemical compatibility with inorganic Li-intercalation oxide thin film electrodes used in electrochromic devices. The higher optical contrast found during WO₃ colouration with PYR₁₄TFSI-LiTFSI, compared to that in a conventional non-aqueous electrolyte like PC-LiTFSI, was attributed to the larger inertness of the former one (no decomposition reaction at the lowest electrode potential). This highly conductive ionic liquid has been incorporated into a polymer matrix (P(EO)₁₀LiTFSI), in order to obtain a transparent solid electrolyte with high Li ion conductivity and good mechanical stability. Finally this solid PYR₁₄TFSI-P(EO)₁₀LiTFSI transparent ion conductor was interposed between the same electrodes as above in order to yield a fully solid-state, Li-ion electrochromic device. This new solid electrolyte was able to transfer reversibly a Li ionic charge between 5 mC cm⁻² and 10 mC cm⁻² from the lithium storage electrode Li_xV₂O₅ to the WO₃ electrochromic electrode in less than 100 s at room T, darkening the device from an initial 80% to a final 30% transmittance (at 650 nm). Such a device has been tested first under various constant current conditions, and later under potentiostatic control using ±2 V steps. The latter method allows not only for a faster response of the electrochromic system, but provides also an easier life stability test of the device, which withstood 2000 cycles with little changes in its optical contrast.     

Solid-state electrochromic devices using pTMC/PEO blends as polymer electrolytes

Flexible, transparent and self-supporting electrolyte films based on poly(trimethylene carbonate)/poly(ethylene oxide) (p(TMC)/PEO) interpenetrating networks doped with LiClO₄ were prepared by the solvent casting technique. These novel solid polymer electrolyte (SPE) systems were characterized by measurements of conductivity, cyclic voltammetry, differential scanning calorimetry and thermogravimetry.The incorporation of solid electrolytes as components of electrochromic devices can offer certain operational advantages in real-world applications. In this study, all-solid-state electrochromic cells were characterized, using Prussian blue (PB) and poly-(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT) as complementary electrochromic compounds on poly(ethyleneterphthalate) (PET) coated with indium tin oxide (ITO) as flexible electrodes. Assembled devices with PET/ITO/PB/SPE/PEDOT/ITO/PET “sandwich-like” structure were assembled and successfully cycled between light and dark blue, corresponding to the additive optical transitions for PB and PEDOT electrochromic layers. The cells required long cycle times (>600 s) to reach full color switch and have modest stability towards prolonged cycling tests. The use of short duration cycling permitted the observation of changes in the coloration-bleaching performance in cells with different electrolyte compositions.     

Spray deposited titanium oxide thin films as passive counter electrodes

Titanium dioxide (TiO₂) thin films were deposited from methanolic solution onto fluorine doped tin oxide coated conducting glass substrates by spray pyrolysis technique. The electrochemical properties of TiO₂ thin films were investigated using cyclic voltammetry, chronoamperometry, chronocoulometry and iono-optical studies, in 0.1N H₂SO₄ electrolyte. Performance of the films deposited at three different substrate temperatures, viz. 350, 400 and 450 °C is discussed in view of their utilization in electrochromic devices, as counter electrode. The magnitude of charge storage capacity, Q/t (4.75-6.13 × 10⁻³ mC/(cm² nm)) and colouration efficiency (3.2-4.3 cm²/mC) of TiO₂ rank these films among the promising counter electrodes in electrochromic devices.     

A soluble conducting polymer: 1-Phenyl-2,5-di(2-thienyl)-1H-pyrrole and its electrochromic application

A thiophene-functionalized monomer 1-phenyl-2,5-di(2-thienyl)-1H-pyrrole (PTP) was synthesized. The chemical polymerization of PTP (CPTP) was realized by using FeCl₃ as the oxidant. The structures of both the monomer and the soluble polymer (CPTP) were investigated by Nuclear Magnetic Resonance (¹H and ¹³C NMR) and Fourier Transform Infrared (FTIR). The average molecular weight of the chemically synthesized polymer was determined by gel permeation chromatography (GPC) as Mn = 7.2 × 10³. The electrochemical oxidative polymerization of PTP was carried out via constant-potential electrolysis. Characterizations of the resulting polymer were done by cyclic voltammetry (CV), FTIR, Scanning Electron Microscopy (SEM) and UV-vis Spectroscopy. The conductivity of sample was measured by four-probe technique. Moreover, the spectroelectrochemical and electrochromic properties of the polymer film were investigated. Spectroelectrochemical analysis of P(PTP) revealed electronic transitions at 413, 577 and 884 nm corresponding to π-π^* transition, polaron, and bipolaron band formations, respectively. Kinetic studies evaluated the switching ability of the P(PTP); the percent transmittance T% was found as 27%. The homopolymer of PTP was used to construct dual-type polymer electrochromic devices (ECDs) against poly(3,4-ethylenedioxythiophene) (PEDOT). Spectroelectrochemistry, electrochromic switching and open circuit stability of the devices were investigated.     

Study and optimization of a flexible electrochromic device based on polyaniline

The synthesis of polyaniline (PANI) thin films was made onto commercially available  cm polyethylene terephthalate (PET)/indium tin oxide (ITO) substrates. By depositing a gold frame previously to the electrochemical PANI synthesis, homogeneous electrochromic PANI layers were obtained. Complete flexible cells could then be built by using a transparent gel electrolyte and a simple PET/ITO counter-electrode. Branched poly(ethyleneimine) (BPEI)-H₃PO₄ and polymethylemethacrylate (PMMA)-PC-LiClO₄ were both tested as electrolytes, but only the latter led to a non-degrading system when the device undergoes several switching potential steps. This flexible, middle-scale and inexpensive device enabled to get a 18% transmission contrast at 780 nm within 3 min.     

Synthesis and electrochemical properties of lithium methacrylate-based self-doped gel polymer electrolytes

In this study, a strategy for synthesizing lithium methacrylate (LiMA)-based self-doped gel polymer electrolytes was described and the electrochemical properties were investigated by impedance spectroscopy and linear sweep voltammetry. LiMA was found to dissolve in ethylene carbonate (EC)/diethyl carbonate (DEC) (3/7, v/v) solvent after complexing with boron trifluoride (BF₃). This was achieved by lowering the ionic interactions between the methacrylic anion and lithium cation. As a result, gel polymer electrolytes consisting of BF₃-LiMA complexes and poly(ethylene glycol) diacrylate were successfully synthesized by radical polymerization in an EC/DEC liquid electrolyte. The FT-IR and AC impedance measurements revealed that the incorporation of BF₃ into the gel polymer electrolytes increases the solubility of LiMA and the ionic conductivity by enhancing the ion disassociations. Despite the self-doped nature of the LiMA salt, an ionic conductivity value of 3.0 × 10⁻⁵ S cm⁻¹ was achieved at 25 °C in the gel polymer electrolyte with 49 wt% of polymer content. Furthermore, linear sweep voltammetry measurements showed that the electrochemical stability of the gel polymer electrolyte was around 5.0 V at 25 °C.     

A novel polymeric gel electrolyte systems containing magnesium salt with ionic liquid

A new polymeric gel electrolyte system consisting of poly(ethylene oxide)-modified polymethacrylate (PEO-PMA) with organic ionic liquid dissolving magnesium salt, Mg[(CF₃SO₂)₂N]₂, has been developed. The ionic conductance and electrochemical properties of the gel films were investigated. The obtained gel film was self-standing, transparent and flexible with sufficient mechanical strength. Thermal analysis of the gel film showed that it is homogeneous and amorphous over a wide temperature range. The highest conductivity, ca. 3.5 mS cm⁻¹ at 60 °C, was obtained for the polymeric gel containing 80 wt.% of the liquid component that consists of 80 mol% of EMITFSI (1-ethyl-3-methylimidazolium bis(trofluoromethylsulfonyl)imide) and 20 mol% of Mg[(CF₃SO₂)₂N]₂. The sort of the ionic liquid affected much on the ionic conductivity of the gel. The dc polarization of a Pt/polymeric gel electrolyte/Mg cell proved that the magnesium ion (Mg²⁺) can mobile in the present polymeric gel system.     

Synthesis, characterization and electrochromic properties of a near infrared active conducting polymer of 1,4-di(selenophen-2-yl)-benzene

A novel selenophene-based monomer, 1,4-di(selenophen-2-yl)-benzene (DSB), was synthesized via Stille coupling reaction of 1,4-dibromobenzene and tributyl(2-selenophenyl)stannane. Conducting polymer (PDSB) was prepared electrochemically in the presence of tetrabutylammonium hexafluorophosphate (TBAPF₆) as the supporting electrolyte in dichloromethane (DCM). The resulting conducting polymer was characterized by Cyclic Voltammetry, Fourier Transform Infrared and Ultraviolet-visible spectroscopy. Spectroelectrochemistry analysis and kinetic studies of PDSB revealed a π-π^∗ transition at 340 nm with a striking and rapid (0.6 s) transmittance change (35%), at near infrared region (1250 nm), indicating that PDSB is a very suitable near infrared electrochromic material.     

Orange to black electrochromic behaviour in poly(2-(2-thienyl)-1H-pyrrole) thin films

We have studied an electrochromic precursor, 2-(2-thienyl)-1H-pyrrole (1), using two improved procedures of the Trofimov reaction. Optimised stereochemical calculations at the B3LYP/6-311G* level showed almost equal s-cis and s-trans conformational populations in 1 with marked out-of-plane deviations of ca. 30°. Model calculations suggest that the predominant rotational conformation in undoped poly(1) would be s-trans with the essential out-of-plane deviations around the all three interheterocyclic bonds of ca. 25-30°. Monomer 1 exhibited two irreversible oxidation processes at +0.86 and +1.3 V corresponding to the oxidation of the pyrrole and thiophene rings, respectively. Orange to black electrochromic behaviour was found in ClO₄⁻ doped poly(1) thin films with colouring and bleaching times of 1.8 and 1.3 s, respectively. The colouration efficiency during the bleaching process was 233 cm²/C. The optical contrast at 450 nm was 19% and in the near-IR was 36%. The band-gap of poly(1) (1.6-1.7 eV) was found to be significantly lower than that of polypyrrole (2.85 eV) and polythiophene (2.3 eV) as a consequence of increased electron delocalisation in the system. Important differences in the morphology of doped and dedoped poly(1) films were observed by atomic-force microscopy (AFM). Doped poly(1) films showed a granular morphology with primary particles of 45-60 nm in size and an average surface roughness of 3.5 nm. On the other hand, dedoped poly(1) films showed interconnected aggregates of 65-90 nm in size as a consequence of particle fusion, with a surface roughness of 9.2 nm. In summary, poly(1) is a promising material for emerging flexible electrochromic devices such as displays and variable optical attenuators.     

Flexible electrochromic device based on poly (3,4-(2,2-dimethylpropylenedioxy)thiophene)

In this study, the design, fabrication and characterization of a flexible electrochromic device based on indium tin oxide (ITO) coated polyethylene terephthalate (PET) plastic is discussed. The working electrochromic material film was poly (3,4-(2,2-dimethylpropylenedioxy)thiophene) (PProDOT-Me₂), while the counter layer of the device was vanadium oxide titanium oxide (V₂O₅/TiO₂) composite film, which serves as an ion storage layer. A solution type electrolyte was used as the ionic transport layer and was sandwiched between the working and counter layers. The device exhibited tuneable light transmittance between transparent and deep blue color, with a maximum contrast ratio at 580 nm wavelength. Other important properties, such as switching speed, life time, and coloration efficiency have been improved.     

All-solid-state electrochromic device of electrodeposited WO3 and prussian blue film with PVC gel electrolyte

An all-solid-state electrochromic device (SED) employing electrodeposited WO₃ and prussian blue film with poly(vinyl chloride) (PVC) gel electrolyte that has high conductivity (10⁻³ S/cm) at room temperature has been fabricated. The SED has been found to have excellent electrochromism and memory characteristics. A reversible color change between blue and colorless was observed when an appropriate potential was applied repeatedly to the electrochromic display device. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 1955–1958, 1998     

The application of P(MMA-co-MAA)/PEG polyblend gel electrolyte in quasi-solid state dye-sensitized solar cell at higher temperature

A poly(methyl methacrylate-co-methacrylate acid)/poly(ethylene glycol) [P(MMA-co-MAA)/PEG] polyblend with viscoelasticity was synthesized by a copolymerizing reaction between methyl methacrylate (MMA) and methacrylate acid (MAA) using azobisisobutyronitrile (AIBN) as initiator in poly(ethylene glycol) (PEG) methanol solution. Then, a polyblend gel electrolyte was prepared by adding KI and I₂ to P(MMA-co-MAA)/PEG system. The influence of compositions of the polyblend gel electrolyte on the ionic conductivity and the effect of temperature on photoelectronic performance of quasi-solid state dye-sensitized solar cell (QS-DSSC) were discussed. It was found that the polyblend gel electrolyte was a good candidate as high-temperature electrolyte for QS-DSSCs. Under an optimized condition, the highest conductivity of the polyblend gel electrolyte was 2.70 mS/cm² at 30 °C. Based on the polyblend gel electrolyte, a light-to-electricity conversion efficiency of 4.85% for QS-DSSC was achieved under AM 1.5 simulated solar light illumination at 60 °C.     

Electrochromic performance of a poly(3,4-ethylenedioxythiophene)-Prussian blue device encompassing a free standing proton electrolyte film

Electrochromic devices incorporating an electropolymerized poly(3,4-ethylenedioxythiophene) (PEDOT) film and a free standing, transparent film of a proton conducting polymer electrolyte with high ambient temperature ionic conductivity of 10⁻² S cm⁻¹ have been fabricated with and without the ion storage electrodeposited Prussian blue (PB) counter electrode layer. While coloration efficiency increases as a function of applied potential in the sole PEDOT device with largest values of CE_(max,VIS) ∼ 120 cm² C⁻¹ and CE_(max,NIR) ∼ 133 cm² C⁻¹ attained at V_c = −1.9 V, the PEDOT:PB device shows a digression from this trend. Much higher coloration efficiencies in the visible (247 cm² C⁻¹ at 570 nm) and NIR (116 cm² C⁻¹ at 1100 nm) regions are achieved for the PEDOT:PB device at a relatively lower reducing voltage of −0.8 V. The PEDOT:PB device shows fast switching redox process (t_c = 2.6 s and t_b = 1.3 s for a 50% optical contrast at 632.8 nm) and a highly reversible charge density as the ratio of Q_inserted to Q_extracted was found to vary between 0.8 and 1.0. When switched between the clear and blue states for 2000 cycles, the insignificant drop in peak current density maxima observed for the PEDOT:PB device, i.e. the good cycling stability, the facile fabrication of device assembly, the ease of scaling up the electrolyte and electrochromic coatings, indicate that this method can be adapted as a simple and inexpensive alternative to conventional electrochromic windows with high cost components.     

Electrochromic property of nano-composite Prussian Blue based thin film

In this paper, we present fabrication of a nano-composite Prussian Blue (NPB) film to synchronously improve the contrast and switching time of regular Prussian Blue (PB) film by applying the concept of nano-technology. The NPB consists of indium tin oxide (ITO) nano-particles (3.0 ± 1.0 Ω, 40 ± 5 nm) as a medium layer for PB to gain larger operative reaction surface area in Li⁺ based electrolyte (1 M LiClO₄/PC) system. The procedures for preparation of NPB are: first, a well-dispersed ITO nano-particle solution is sprayed onto ITO glass (30 Ω/sq) at 200 °C; the PB film is then electroplated onto the pre-sprayed ITO nano-particles. Since ITO nano-particles can be well covered with PB, the NPB film forms a nano-porous electrochromic layer. The switching speed and contrast of NPB exhibit much better performances than traditional PB thin films. The structure, morphology, and electrochromic properties were characterized by scanning electron microscopy (SEM), cyclic voltammograms (CV), and UV-vis spectroscopy.     

Influence of molecular weight of PEG on the property of polymer gel electrolyte and performance of quasi-solid-state dye-sensitized solar cells

A new kind of polymer gel electrolyte based on poly(acrylic acid)-poly(ethylene glycol) (PAA-PEG) hybrid was synthesized. The factor of molecular weight of PEG in the hybrid plays an important role in determining the liquid electrolyte absorbency of the hybrid and ionic conductivity of the polymer gel electrolyte, sequentially affects the photovoltaic performance of quasi-solid-state dye-sensitized solar cells. Using the hybrid with PEG molecular weight of 20,000, a polymer gel electrolyte with liquid electrolyte absorbency of 6.9 g g⁻¹ and ionic conductivity of 5.35 mS cm⁻¹ was obtained. Based on the polymer gel electrolyte, a quasi-solid-state dye-sensitized solar cell with conversion efficiency of 5.25% was achieved under irradiation of AM 1.5, 100 mW cm⁻².     

Influence of solvent on the poly (acrylic acid)-oligo-(ethylene glycol) polymer gel electrolyte and the performance of quasi-solid-state dye-sensitized solar cells

The influence of solvents on the property of poly (acrylic acid)-oligo-(ethylene glycol) polymer gel electrolyte and photovoltaic performance of quasi-solid-state dye-sensitized solar cells (DSSCs) were investigated. Solvents or mixed solvents with large donor number enhance the liquid electrolyte absorbency, which further influences the ionic conductivity of polymer gel electrolyte. A polymer gel electrolyte with ionic conductivity of 4.45 mS cm⁻¹ was obtained by using poly (acrylic acid)-oligo-(ethylene glycol) as polymer matrix, and absorbing 30 vol.% N-methyl pyrrolidone and 70 vol.% γ-butyrolactone with 0.5 M NaI and 0.05 M I₂. By using this polymer gel electrolyte coupling with 0.4 M pyridine additive, a quasi-solid-state dye-sensitized solar cell with conversion efficiency of 4.74% was obtained under irradiation of 100 mW cm⁻² (AM 1.5).