Thermal conductivity of halogenated ethanes,HFC-134a,HCFC-123, and HCFC-141b

The gaseous thermal conductivity of three CFC alternatives, HFC-134a (1,1,1,2-tetrafluoroethane), HCFC-123 (1,1-dichloro-2,2,2-trifluoroethane), and HCFC-141b (1,1-dichloro-1-fluoroethane), has been measured in the temperature ranges 273–363 K (HFC-134a) and 313–373 K (HCFC-123, HCFC-141b) at pressures up to saturation. The measurements were performed with a new improved transient hot-wire apparatus. The uncertainty of the experimental data is estimated to be within 1%. The gaseous thermal conductivity obtained in this work together with the liquid thermal-conductivity data from the literature were correlated with temperature and density by an empirical equation based on the excess thermal-conductivity concept. The equation is found to represent the experimental results with average deviations of 2.5 % for HFC-134a, 0.75% for HCFC-123, and 0.55% for HCFC-141b, respectively.     

Viscosity of Gaseous Mixtures of HFC-125+HFC-32

This paper reports experimental results for the viscosity of gaseous mixtures of HFC-125 (pentafluoroethane)+HFC-32 (difluoromethane). The measurements were carried out with an oscillating-disk viscometer of the Maxwell type at temperatures from 298.15 to 423.15K. The viscosity was measured for three mixtures (mole fraction of HFC-125 is 0.7498, 0.4998, or 0.2475). The viscosity at normal pressure was analyzed with the extended law of corresponding states developed by Kestin et al. and the scaling parameters were obtained for unlike-pair interactions between HFC-125 and HFC-32. The modified Enskog theory developed by Vesovic and Wakeham was applied to predict the viscosity for the binary gaseous mixtures under pressure. For the calculation of the pseudo-radial distribution function in mixtures, a method based on the Carnahan–Starling equation for the radial distribution function of hard sphere mixtures is proposed.     

Thermal Conductivity of HFC-32, HFC-125, and HFC-134a in the Solid Phase

Measurements of the thermal conductivity of HFC-32, HFC-125, and HFC-134a were carried out for the first time in both solid and liquid phases at the saturation pressure at room temperature and in the temperature ranges from 120 to 263, from 140 to 213, and from 130 to 295 K, respectively. A transient hot-wire instrument using one bare platinum wire was employed for measurements, with an uncertainty of less than ±2%. The experimental results demonstrated that the thermal conductivity of HFC-32, HFC-125, and HFC-134a in the solid phase showed a positive temperature dependence. For HFC-32 and HFC-125, there were big jumps between the solid and the liquid thermal conductivity at the melting point. But for HFC-134a, the solid and liquid thermal conductivity at the melting point is almost-continuous.     

Vapor+Liquid Equilibrium Measurements and Correlation of the Binary Refrigerant Mixtures Difluoromethane (HFC-32)+1,1,1,2,3,3-Hexafluoropropane (HFC-236ea) and Pentafluoroethane (HFC-125)+1,1,1,2,3,3-Hexafluoropropane (HFC-236ea) at 288.6, 303.2, and 318.2 K

Isothermal vapor–liquid equilibria (VLE) for the binary systems of difluoromethane (HFC-32)+1,1,1,2,3,3-hexafluoropropane (HFC-236ea) and pentafluoroethane (HFC-125)+1,1,1,2,3,3-hexafluoropropane (HFC-236ea) were measured at 288.6, 303.2, and 318.2 K using an apparatus in which the vapor phase was recirculated through the liquid. The phase composition at equilibrium was measured by gas chromatography, based on calibration using gravimetrically prepared mixtures. Both systems show a slight deviation from Raoult's law. The uncertainties in pressure, temperature, and vapor- and liquid-phase composition measurements were estimated to be no more than ±1 kPa, ±0.02 K, and ±0.002 mol fraction, respectively. The data were analyzed using the Carnahan–Starling–DeSantis equation of state.     

Thermal Conductivity of Binary Refrigerant Mixtures of HFC-32/125 and HFC-32/134a in the Liquid Phase

The liquid thermal conductivity of mixtures of HFC-32/125 and HFC-32/134a was measured using the transient hot-wire apparatus in the temperature ranges from 213 to 293 K and from 193 to 313 K, respectively, in the pressure range from 2 to 30 MPa and with HFC-32 mass fractions of 0.249, 0.500, and 0.750 for each system. The uncertainty of the thermal conductivity was estimated to be ±0.7%. For practical applications, the thermal conductivity data for the two mixtures were represented by a polynomial in temperature, pressure, and mass fraction of HFC-32 with a standard deviation of 1.0%.     

Thermal conductivity of alternative refrigerants in the liquid phase

Measurements ofthe thermal conductivity of five alternative refrigerants. namely, difluoromethane HFC-321. pentafluoroethane (HFC-125), 1,1,1-trifluoroethane (HFC-143a), and dichloropentafluoropropanes (HCFC-225ca and HCFC-225cb). are carried out in the liquid phase, The range of temperature is 253–324 K for HFC-32, 257–305 K for HFC-125, 268–314 K for HFC-134a. 267–325 K for HCFC-225ca, and 286–345 K for HCFC-225cb, The pressure rank is from saturation to 30 MPa, The reproducibility of the data is better than 0.5% and the accuracy of the data is estimated to be of the order of 1%. The experimental results for the thermal conductivity ofeach substance are correlated by an equation which is a function of temperature and pressure. A short discussion is given to the comparison of the present results with literature values for HFC-125, The saturated liquid thermal conductivity values of HFC-32. HFC-125, and HFC-143a are compared with those of chlorodifluoromethane (HCFC-22) and tetrafluoroethane (HFC-134a) and it is shown that the value of HFC-32 is highest, while that of HFC-125 is lowest, among these substances, The dependence of thermal conductivity on number of fluorine atoms among the refrigerants with the same number of carbon and hydrogen atoms is discussed.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994. Boulder, Colorado. U.S.A.     

Viscosity of Gaseous Mixtures of HFC-134a (1,1,1,2-Tetrafluoroethane)+HFC-32 (Difluoromethane)

This paper reports experimental results for the viscosity of gaseous mixtures of HFC-134a (1,1,1,2-tetrafluoroethane)+HFC-32 (difluoromethane). The measurements were carried out with an oscillating-disk viscometer of the Maxwell type at temperatures from 298.15 to 423.15 K. The viscosity was measured for three mixtures containing 25.00, 52.40, and 74.98 mole% HFC-134a in HFC-32. Experimental results for the viscosity at normal pressures show a minimum as plotted against mole fraction in the higher temperature region, which may be the first experimental observation of the minima for dilute binary gaseous mixtures of HFCs. The viscosity at normal pressures was analyzed with the extended law of corresponding states developed by Kestin et al., and the scaling parameters were obtained for unlike-pair interactions between HFC-32 and HFC-134a. The modified Enskog theory developed by Vesovic and Wakeham was applied to predict the viscosity for the binary gaseous mixtures under pressure. As for the calculation of pseudo-radial distribution functions in mixtures, a method based on the equation of state for hard-sphere fluid mixtures proposed by Carnahan–Starling was applied.     

Phase Equilibria of CFC Alternative Refrigerant Mixtures: 1,1,1,2,3,3,3-Heptafluoropropane (HFC-227ea)+Difluoromethane (HFC-32), +1,1,1,2-Tetrafluoroethane (HFC-134a), and +1,1-Difluoroethane (HFC-152a)

Isothermal vapor–liquid equilibria were measured for the binary systems difluoromethane (HFC-32)+1,1,1,2,3,3,3-heptafluoropropane (HFC-22ea) and 1,1-difluoroethane (HFC-152a)+1,1,1,2,3,3,3-heptafluoropropane at 283.15 and 303.15 K and 1,1,1,2-tetrafluoroethane (HFC-134a)+1,1,1,2,3,3,3-heptafluoropropane at 303.15 and 323.15 K in an apparatus in which both phases were recirculated. The experimental data were correlated with the Peng–Robinson equation of state using the Wong–Sandler mixing rules. Azeotropic behavior has not been found in any of the three mixtures.     

Vapor–Liquid Equilibrium of HFC-32/134a And HFC-125/134a Systems

A vapor-liquid equilibrium apparatus has been developed and used to obtain data for the binary HFC-32/134a and HFC-125/134a systems. Twenty-two equilibrium data are obtained for the HFC-32/134a system over the temperature range from 258.15 to 283.15 K at 5 K intervals and the composition range from 0.2 to 0.8 liquid mole fraction. Twenty-five equilibrium data are obtained for the HFC-125/134a system over the temperature range from 263.15 to 303.15 K at 10 K intervals and the composition range from 0.18 to 0.81 liquid mole friction. These data have been tested and found to be thermodynamically consistent. Based upon the present data, the binary interaction parameters of the Carnahan-Starling-De Santis (CSD) and Redlich–Kwong–Soave (RKS) equations of state are calculated for five isotherms for the HFC-125/134a mixture and six isotherms for the HFC-32/134a mixture. The calculated results from the CSD equation are compared with data in the open literature.     

Surface Tension of 1,1,1-Trifluoroethane (HFC-143a), 1,1,1,2,3,3,3-Heptafluoropropane (HFC-227ea), and Their Binary Mixture HFC-143a/227ea

The surface tension of 1,1,1-trifluoroethane (HFC-143a), 1,1,1,2,3,3,3-hepta-fluoropropane (HFC-227ea), and their binary mixture HFC-143a/227ea at 3 nominal mass fractions of 27.91%/72.09%, 49.44%/50.56%, and 74.11%/25.89% were measured in the temperature range from 253 to 333K using the differential capillary rise method (DCRM) under vapor-liquid equilibrium conditions. The temperature and surface tension uncertainties were estimated to be within ±10 mK and ±0.15 mNm^–1, respectively. The present data were used to develop a van der Waals-type surface tension correlation for pure HFC-143a and HFC-227ea. Correlations for pure HFC-143a and HFC-227ea were used to develop a surface tension correlation for the experimental data of the HFC-143a/227ea mixtures as a function of the mass fraction.     

Measurements ofPVTx properties of refrigerant mixture HFC-32+HFC-125 in the gaseous phase

The experimental 156PVTx properties of an important binary refrigerant mixture, HFC-32 (difluoromethane)+HFC-125 (pentafluorethane), have been measured for three compositions, i.e., 50, 60, and 80 wt% HFC-32, by a constant-mass-method coupled with expansion procedure in an extensive range of temperaturesT from 320 to 440 K, of pressuresP from 1.8 to 5.3 M Pa, and of densities p from 50 to 124 kg · m^–3. The experimental uncertainties of the present measurements are estimated to be within ±7 mK in temperature, ±2 kPa in pressure, ±0.2% in density and ±0.02 wt% of HFC-32. The sample purities are 99.998 wt% for HFC-32 and 99.99 wt% for HFC-125. Seventy-eight second and third virial coeflicients for temperatures from 320 to 440 K have been determined by the present measurements.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

Vapor–Liquid Equilibrium Measurements for Binary Mixtures Containing 1,1,1,2,3,3,3-Heptafluoropropane (HFC-227ea)1

Isothermal vapor–liquid equilibrium data for two binary mixtures of alternative refrigerants were determined by using an apparatus applying recirculating vapor and liquid. The difluoromethane (HFC-32)+1,1,1,2,3,3,3-heptafluoropropane (HFC-227ea) and 1,1,1,2-tetrafluoroethane (HFC-134a)+1,1,1,2,3,3,3-heptafluoropropane (HFC-227ea) systems were studied at 298.15 and 312.65 K. The pressure and vapor and liquid compositions were measured at each temperature. The experimental data were correlated with the Peng–Robinson equation of state using the van der Waals one-fluid mixing rule. Calculated results show that this equation yields good agreement with the experimental data.     

Measurements of PVTx Properties for Binary Mixtures of HFC-32 (CH2F2) and HFC-134a (CH2FCF3)

An experimental study of pressure–volume–temperature–composition (PVTx) properties for binary mixtures of HFC-32 and HFC-134a was conducted in the range of temperatures from 243 to 473 K, pressures up to 16.7 MPa, densities from 9.5 to 1065 kg·m^–3, and compositions from 0.39 to 0.89 mol fraction of HFC-32, with uncertainties of 8 mK, 1.7 kPa, 0.04%, and 0.001 mol fraction, respectively. A constant-volume method was used for the present measurements either with a spherical vessel approximately 270 cm³ in its inner volume or with a cylindrical vessel approximately 138cm³ in its inner volume. The present data were compared with the Piao equation of state for this substance.     

An Experimental Study of <Emphasis Type="Italic">pVTx</Emphasis> Properties for Binary Mixtures of HFC-32 and HFC-125

An experimental study of the pressure-volume-temperature-composition pVTx properties for binary mixtures of HFC- 32(CH₂F₂) and HFC-125(C₂HF₅) was conducted in the range of temperatures from 343 to 423 K, pressures from 4.0 to 15.6 MPa, densities from 485 to 491 kg·m^–3, and compositions from 0.05 to 0.90 mole fraction of HFC-32, with uncertainties of 4.4 mK, 1.6 kPa, 0.02% , and 0.0004 mole fraction, respectively. The available experimental data for pVTx properties of binary mixtures of HFC-32 and HFC-125 have been compared with the equation of state developed by Tillner-Roth et al. From the critical evaluation, this equation of state should be revised in the range of low mole fractions of HFC-32.Paper presented at the Sixteenth European Conference on Thermophysical Properties, September 1–4, 2002, London, United Kingdom.     

Thermal Conductivity of Ternary Refrigerant Mixtures of HFC-32/125/134a in the Liquid Phase

The liquid thermal conductivity of two ternary mixtures of HFC-32/125/134a (23.0/25.0/52.0 and 19.0/43.8/37.2 wt%) was measured using a transient hot-wire instrument in the temperature ranges from 193 to 293 K and from 213 to 293 K, respectively, and in the pressure range from 2 to 30 MPa. The thermal conductivity has an estimated uncertainty of ±0.7%. For engineering purposes, the thermal conductivity data were correlated using a polynomial in temperature and pressure for each mixture with a standard deviation of 0.6%.     

Thermal conductivity of gaseous HFC-134a,HFC-143a,HCFC-141b,and HCFC-142b

The thermal conductivity of new environmentally acceptable fluorocarbons HFC-134a (CH₂FCF₃), HFC-143a (CH₃CF₃), HCFC-141b (CH₃CCl₂F), and HCFC-142b (CH₃CCl₂F) in the gaseous phase has been measured in the temperature range 293–353 K at pressures up to 4 MPa. The thermal conductivity has been measured with a coaxial-cylinder cell on a relative basis. The apparatus was calibrated with He, Ne, Ar, Kr, N₂, CH₄, and SF₆ as reference fluids. The uncertainty of the experimental data obtained is estimated to be within 2% except for the uncertainty associated with the reference thermal-conductivity values. The excess thermal conductivity has been correlated satisfactorily as a function of density.     

Surface tension of pentafluoroethane (HFC-125)

A set of accurate surface-tension data for HFC-125 has been obtained experimentally with both an absolute capillary rise technique and a differential capillary rise technique in the temperature range of 233.15–333.15 K. The purity of the experimental HFC-125 sample is 99.98 wt%. The two sets of experimental results with an absolute capillary rise method agree well with each other and, also, with the experimental results with a differential capillary rise method. The absolute deviations of experimental results with these two methods are within 0.01 mN · m^–1. The relative deviation are within 0.2%. A van der Waals surface-tension correlation is also proposed.     

Experimental surface tensions for HFC-32, HCFC-124, HFC-125, HCFC-141b,HCFC-142b,and HFC-152a

The surface tension of six alternative refrigerants, i.e., HFC-32 (CH, F, ). HCFC-124 (CHClFCF,), HFC-125 (CHF₂CF₃). HCFC-14lb ICH,CCI,F). HCFC-142b (CH₃CCIF₂), and HFC-152a (CH₃CHF₂), has been measured in the present study. The measurements were conducted under equilibrium conditions between the liquid and its saturated vapor. The differential capillary-rise method (DORM) used two glass capillaries, with inner radii of 0.3034 ± 0.0002 and 0.5717 ±0.0002 mm, respectively. Temperatures in the range from 270 to 340 K were considered. The accuracy of surface tension measurements is estimated to be within ±0.2 mN · m^–1. The temperatures are accurate to within ±20 mK. The temperature dependence of the resultant data were successfully represented by van der Waals' correlations to within ±(1.1 mN m^–1 for each substance. Available surface tension data are compared with the present data.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

Vapor–Liquid Equilibria of CFC Alternative Refrigerant Mixtures: Trifluoromethane (HFC-23)+Difluoromethane (HFC-32), Trifluoromethane (HFC-23)+Pentafluoroethane (HFC-125), and Pentafluoroethane (HFC-125)+1,1-Difluoroethane (HFC-152a)

Isothermal vapor–liquid equilibria for three binary mixtures of CFC alternative refrigerants were determined in an equilibrium apparatus in which both phases were continuously recirculated. The pressures and vapor and liquid compositions were measured for the binary systems trifluoromethane (HFC-23)+difluoromethane (HFC-32) and trifluoromethane (HFC-23)+pentafluoroethane (HFC-125) at 283.15 and 293.15 K and pentafluoroethane (HFC-125)+1,1-difluoroethane (HFC-152a) at 293.15 K. The experimental data were correlated with the Peng–Robinson–Stryjek–Vera equation of state using the Huron–Vidal original mixing rule. Calculated results with this equation showed good agreement with the experimental data.     

Viscosity of Gaseous HFC-125 (Pentafluoroethane) Under High Pressures

This paper reports experimental results lor the viscosity of gaseous HFC-125 (pentafluoroethane) under high pressures. The measurements were carried out with an oscillating-disk viscometer of the Maxwell type at temperatures from 298.15 to 423.15 K and at pressures up to the saturated vapor pressures at each temperature at subcritical conditions or up to 9 MPa at supercritical temperatures. Intermolecular scaling parameters of HFC-125 for the extended corresponding states were determined from the viscosity data at 0.1 MPa. An empirical viscosity equation is proposed to interpolate the present experimental results as a function of temperature and density.