共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
4.
以某航空发动机弧齿锥齿轮箱为研究对象,提出了一套锥齿轮接触印痕主动设计的方法。首先,基于弧齿锥齿轮宏观参数和GEMS软件,进行齿面设计,得到齿轮副精确齿面;其次,考虑传动系统受载变形、轴承游隙和加工误差等因素的影响,建立弧齿锥齿轮系统级接触印痕仿真分析模型,得到锥齿轮在工作状态下的接触印痕和振动响应;然后,将上述设计齿面应用于加工,设计试验,将试验得到的接触印痕和振动响应分析结果与理论分析进行对比,验证了仿真分析模型的可靠性;最后,基于该仿真分析模型对上述齿面进行接触印痕优化设计,得到了满足强度和动态性能要求的齿面,形成了弧齿锥齿轮接触印痕主动设计方法。 相似文献
5.
6.
7.
具有弧齿锥齿轮啮合的试验器转子系统临界转速及稳态不平衡响应试验研究 总被引:1,自引:1,他引:0
戚先萍 《振动、测试与诊断》1998,18(2):134-138
对具有弧齿锥齿轮啮合的试验器转子──支承系统的振动特性进行试验研究,采用传递矩阵法计算该试验器转子的临界转速及稳态不平衡响应,研究支承刚性及弧齿锥齿轮螺旋线的方向对稳态不平衡响应的影响。理论计算结果与试验结果吻合较好。 相似文献
8.
9.
通过建立一对直齿锥齿轮有限元模型,利用ANSYS/LS-DYNA软件对其进行瞬态仿真分析,验证其仿真方法的准确性。基于此建立一对零度弧齿锥齿轮对比模型进行仿真计算,根据仿真结果,对齿轮接触力、齿面接触应力、齿根弯曲应力、大齿轮振动方面进行比较分析,发现在相同载荷和转速情况下,直齿锥齿轮与零度弧齿锥齿轮的传动特性具有明显的差异性。为两种类型的锥齿轮在航空领域中的选择和应用提供参考。 相似文献
10.
现代航空发动机大多采用弹性支承,为了掌握弹性支承对弧齿锥齿轮传动的动态特性影响规律,需要开展弹性支承下弧齿锥齿轮的实验研究.设计并搭建了弧齿锥齿轮实验台,采用挠性套筒与刚性套筒相结合实现弹性支承刚度的连续变化,避免了拆卸转子造成的锥齿轮副安装位置的变化.建立了弹性支承下弧齿锥齿轮实验台的振动方程,并对齿轮副啮合刚度进行了数值计算,获得了啮合刚度的回归公式.针对不同外激励频率和支承刚度,计算了齿轮轴心振动位移和振动速度,得出在ω=2 300 Hz时主动齿轮振动最大的结论,为进一步的实验研究奠定了基础. 相似文献
11.
12.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
13.
三爪自定心卡盘作为机床的主要附件,已有一百多年的发展历史,尽管目前随着数控技术的不断发展,越来越多地需求高速动力卡盘,但三爪自定心卡盘目前仍有一定的市场。 要保证卡盘可靠地夹紧工件,必须使其有可靠的夹持精度;要保持卡盘的精度,必须要严格控制各零部件公差及误差,如盘丝的极心偏。 极心偏是形成圆的渐开线的基圆圆心 (极心 )与盘丝内孔中心不同心所造成的偏差值。它对卡盘精度的影响分两种情况,一是卡爪夹持弧采用配磨,二是卡爪夹持弧采用单磨。本文主要探讨配磨时的影响。 卡爪夹持弧采用配磨,即每台卡盘整体… 相似文献
14.
详细分析了圆柱面素线的直线度公差带在新旧标准中定义和解释的区别,并从对圆柱面素线实际要素检测的角度,提出了推行新标准的实际意义。 相似文献
15.
16.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
17.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
18.
我公司于80年代末引进Aspera公司年产80万台冰箱(冷柜)压缩机生产线及软件技术,在压缩机加工中,活塞销孔(如图1所示)的加工是难点之一。用镗床加工,质量一直难以达到要求,废品率很高。后来我们将Aspera公司的加工工艺即精镗后滚光改为精镗后用金刚石铰刀粗、精铰孔,由此解决了这个技术难题。(1)原意大利Aspera公司工艺简述其工艺流程为:钻6.5通孔→扩孔至7+0.1→粗镗7.473+0.036、圆柱度0.01→精镗至7.935+0.006、圆柱度0.002→滚光7.938+0.006、圆柱度0… 相似文献
19.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
20.
The article presents a brief review of the wear models based on the kinetic thermofluctuation approach. The materials were developed using SamGTU sclerometric programming software and a set of instruments developed at Samara Engineering University for assessing the parameters of kinetic thermoactivation for surface fracture deformed by friction. The first obtained results of assessments and the estimated prediction of wear resistance exemplified by tribocouple of the aircraft chassis are presented. 相似文献