Structural Analysis of SiO2-Al2O3 Glasses

The structure of SiO₂-Al₂O₃ glasses with up to 60 wt% Al₂O₃ was investigated using the radial distribution function together with the correlation method based on X-ray scattering intensity data. Radial distribution curves are interpreted on the basis of glass-in-glass separation with the constituents of SiO₂-rich and Al₂O₃-rich glasses. The structure of the Al₂O₃-rich glass has a short-range ordering similar to the crystal structure of mullite. The calculated S- i (S) curve of this model gives good agreement with the observed one.     

Diffusion and Reaction Studies in the System Al2O3-SiO2

High-temperature diffusion kinetics and phase relations between couples of fused SiO₂ or cristobalite and sapphire or mullite were investigated in air and in helium. Subsolidus liquid formation between sapphire and cristobalite indicates the existence of a metastable system without mullite. A liquid phase is considered to be essential for the nucleation of mullite. The growth rate of mullite exceeded its dissolution rate in semi-infinite fused-SiO₂-sapphire couples above 1634°C. The inter-facial liquid compositions provided data for a minor revision of the mullite liquidus curve. Diffusion coefficients calculated from the Al profiles vary greatly with concentration and temperature, resulting in a large range of values for apparent activation energy, which decreases with increasing Al₂O₃ content (∼310 to ∼60 kcal/mol for ∼4 to ∼22 wt% Al₂O₃). The diffusion process in the liquid is considered to be cooperative movement of oxygen-containing Al and Si complexes whose nature changes with composition and temperature; this change in the diffusing species contributes to the range in the values of experimental apparent activation energies.     

Mullite Crystallization from SiO2-Al2O3 Melts

SiO₂-Al₂O₃ melts containing 42 and 60 wt% A1₂O₃ were homogenized at 2090°C (∼10°) and crystallized by various heat treatment schedules in sealed molybdenum crucibles. Mullite containing ∼78 wt% A1₂O₃ precipitated from the 60 wt% A1₂O₃ melts at ∼1325°± 20°C, which is the boundary of a previously calculated liquid miscibility gap. When the homogenized melts were heat-treated within this gap, the A1₂O₃ in the mullite decreased with a corresponding increase in the Al₂O₃ content of the glass. A similar decrease of Al₂O₃ in mullite was observed when crystallized melts were reheated at 1725°± 10°C; the lowest A1₂O₃ content (∼73.5 wt%) was in melts that were reheated for 110 h. All melts indicated that the composition of the precipitating mullite was sensitive to the heat treatment of the melts.     

Rapid Crystallization of SiO2-Al2O3 Glasses

The crystallization of Al₂O₃-rich glasses in the system SiO₂-Al₂O₃ which were prepared by flame-spraying and/or splat-cooling was studied by DTA, electron microscopy, and X-ray diffraction. Over a wide range of compositions, the crystallization temperature ( T_x ) remained near 1000°C, changing smoothly with composition. In all cases crystallization of mullite was detected by X-ray diffraction. In the low-Al₂O₃ region, coarsening of the microstructure during crystallization was observed by electron microscopy. In the high-Al₂O₃ region mullite and γ-Al₂O₃ cocrystallized; this behavior may be interpreted as evidence of a cooperative process of crystallization at the respective T_x 's. The crystallite size of the mullite immediately after rapid crystallization increased continuously with increasing Al₂O₃ content. In light of the T_x data, the adequacy of the evidence for the proposed metastable miscibility gap in the SiO₂-Al₂O₃ system is questioned.     

Preparation of NiAl2O4/SiO2 and Co2+-Doped NiAl2O4/SiO2 Nanocomposites by the Sol–Gel Route

NiAl₂O₄/SiO₂ and Co²⁺-doped NiAl₂O₄/SiO₂ nanocomposite materials of compositions 5% NiO – 6% Al₂O₃– 89% SiO₂ and 0.2% CoO – 4.8% NiO – 6% Al₂O₃– 89% SiO₂, respectively, were prepared by a sol–gel process. NiAl₂O₄ and cobalt-doped NiAl₂O₄ nanocrystals were grown in a SiO₂ amorphous matrix at around 1073 K by heating the dried gels from 333 to 1173 K at the rate of 1 K/min. The formations of NiAl₂O₄ and cobalt-doped NiAl₂O₄ nanocrystals in SiO₂ amorphous matrix were confirmed through X-ray powder diffraction, Fourier transform infrared spectroscopy, differential scanning calorimeter, transmission electron microscopy (TEM), and optical absorption spectroscopy techniques. The TEM images revealed the uniform distribution of NiAl₂O₄ and cobalt-doped NiAl₂O₄ nanocrystals in the amorphous SiO₂ matrix and the size was found to be ∼5–8 nm.     

Effect of Small Additions of Al2O3 and Ga2O3 on the Immiscibility Temperature of Na2O-SiO2 Glasses

Alumina and gallia were substituted separately for Na₂O in amounts of 0.2, 0.5, 1.0, 1.5, 2.0, and 3.0 wt% in three Na₂O-SiO₂ glass compositions (82, 84, and 86 wt% SiO₂) within the immiscibility region. The immiscibility regions for each system extend to ∼1.5 mol% of the added oxide. In general, the addition reduced the immiscibility temperature ( T _m), but at the edge of the immiscibility region (82% SiO₂) the Na₂O loss effect initially increased T _m. A structural model of the miscibility of Al₂O₃ added to silicate glasses is presented.     

Sintering and Crystallization of CaO–Al2O3–ZrO2–SiO2 Glasses Containing Different Amount of Al2O3

In this work several complementary techniques have been employed to carefully characterize the sintering and crystallization behavior of CaO–Al₂O₃–ZrO₂–SiO₂ glass powder compacts after different heat treatments. The research started from a new base glass 33.69 CaO–1.00 Al₂O₃–7.68 ZrO₂–55.43SiO₂ (mol%) to which 5 and 10 mol% Al₂O₃ were added. The glasses with higher amounts of alumina sintered at higher temperatures (953°C [lower amount] vs. 987°C [higher amount]). A combination of the linear shrinkage and viscosity data allowed to easily find the viscosity values corresponding to the beginning and the end of the sintering process. Anorthite and wollastonite crystals formed in the sintered samples, especially at lower temperatures. At higher temperatures, a new crystalline phase containing ZrO₂ (2CaO·4SiO₂·ZrO₂) appeared in all studied specimens.     

Quaternary System Al2O3–CaO–MgO–SiO2: I, Study of the Crystallization Volume of Al2O3

Compatibility relations of Al₂O₃ in the quaternary system Al₂O₃–CaO–MgO–SiO₂ were studied by firing and quenching followed by microstructural and energy-dispersive X-ray examination. A projection of the liquidus surface of the primary phase volume of Al₂O₃ was constructed in terms of the CaO, SiO₂, and MgO contents of the mixtures recalculated to 100 wt%. Two invariant points, where four solids coexist with a liquid phase, were defined, and the positions of the isotherms were tentatively established. The effect of SiO₂, MgO, and CaO impurities on Al₂O₃ growth also was studied.     

The System Al2O3-Cr2O3-Sio2

Liquidus phase equilibrium data are presented for the system Al₂O₃-Cr₂O₃-SiO₂. The liquidus diagram is dominated by a large, high-temperature, two-liquid region overlying the primary phase field of corundum solid solution. Other important features are a narrow field for mullite solid solution, a very small cristobalite field, and a ternary eutectic at 1580°C. The eutectic liquid (6Al₂O₃-ICr₂O₃-93SiO₂) coexists with a mullite solid solution (61Al₂O₃-10Cr₂O₃-29SiO₂), a corundum solid solution (19Al₂O₃-81Cr₂O₃), and cristobalite (SO₂). Diagrams are presented to show courses of fractional crystallization, courses of equilibrium crystallization, and phase relations on isothermal planes at 1800°, 1700°, and 1575°C. Tie lines were sketched to indicate the composition of coexisting mullite and corundum solid solution phases.     

Densities of SiO2-Al2O3 Melts

The densities of binary aluminosilicate melts were measured X-radiographically as a function of Al₂O₃, concentration between 1800° and 2000°C. Within this temperature range, the density curves vary linearly and are parallel from fused SiO₂ to ≊30 to 45 mol% Al₂O₃, depending on the temperature. At higher Al₂O₃ contents, negative deviation from linearity increases with increasing temperature. Recent supplementary research efforts on various aspects of the system SiO₂-Al₂O₃ indicate that the changing coordination and structural role of the aluminum ion may be a primary factor in determining the shapes of the density curves.     

Properties of Sm2O3─Al2O3─SiO2 Glasses for In Vivo Applications

The compositional range for glass formation below 1600°C in the Sm₂O₃─Al₂O₃─SiO₂ system is (9–25)Sm₂O₃─(10–35)Al₂O₃─(40–75)SiO₂ (mol%). Selected properties of the Sm₂O₃─Al₂O₃─SiO₂ (SmAS) glasses were evaluated as a function of composition. The density, refractive index, microhardness, and thermal expansion coefficient increased as the Sm₂O₃ content increased from 9 to 25 mol%, the values exceeding those for fused silica. The dissolution rate in 1 N HCl and in deionized water increased with increasing Sm₂O₃ content and with increasing temperature to 70°C. The transformation temperature ( T _g ) and dilatometric softening temperature ( T _d ) of the SmAS glasses exceeded 800° and 850°C, respectively.     

Thermodynamic Modeling of the Isomorphous Phase Diagrams in the Al2O3–Cr2O3 and V2O3–Cr2O3 Systems

The phase diagrams in the Al₂O₃–Cr₂O₃ and V₂O₃–Cr₂O₃ systems have been assessed by thermodynamic modeling with existing data from the literature. While the regular and subregular solution models were used in the Al₂O₃–Cr₂O₃ system to represent the Gibbs free energies of the liquid and solid phases, respectively, the regular solution model was applied to both phases in the V₂O₃–Cr₂O₃ system. By using the liquidus, solidus, and/or miscibility gap data, the interaction parameters of the liquid and solid phases were optimized through a multiple linear regression method. The phase diagrams calculated from these models are in good agreement with experimental data. Also, the solid miscibility gap and chemical spinodal in the V₂O₃–Cr₂O₃ system were estimated.     

Quaternary System Al2O3–CaO–MgO–SiO2: II Study of the Crystallization Volume of MgAl2O4

Solid-state compatibility and melting relations of MgAl₂O₄ in the quaternary system Al₂O₃–CaO–MgO–SiO₂ were studied by firing and quenching selected samples located in the 65 wt% MgAl₂O₄, plane followed by microstructural and energy dispersive X-ray analysis. A projection of the liquidus surface of the primary crystallization volume of MgAl₂O₄ was constructed from CaO, SiO₂ and exceeding Al₂O₃, not involved in stoichiometric MgAl₂O₄ formation; those three amounts were recalculated to 100 wt%. The temperature and character of six invariant points, where four solids co-exist with a liquid phase, were defined. One maximum point was localized and the positions of the isotherms were tentatively established. The effect of CaO, SiO₂, and Al₂O₃ impurities on the high temperature behavior of spinel materials was also discussed.     

Thermodynamic Activities in B2O3-SiO2 Melts at 1475 K

Eight glass samples in the B₂O₃-SiO₂ system with compositions from 20 to 90 mol% B₂O₃ were prepared. The equilibrium vaporization was studied by Knudsen effusion mass spectrometry at temperatures between 1450 and 1500 K. B₂O₃ ( g ) was the most abundant boron-containing species in the vapor; no silicon-containing gaseous species were detected. Thermodynamic activities of B₂O₃ in the liquid were determined at 1475 K. Thermodynamic activities of SiO₂ and integral excess Gibbs energies were estimated from the thermodynamic activities of B₂O₃. The thermodynamic data support the results obtained by other methods indicating the existance of a miscibility gap in the metastable liquid.     

The System Bi2O3-SiO2

The Bi₂O₃-rich side of the system Bi₂O₃-SiO₂ was studied with powder X-ray diffraction and differential thermal analysis. In the composition 6Bi₂O₃. x SiO₂, the metastable γ phase (bcc) was observed to exist over the range of 0 < x ≤ 1. In most of the compositions studied, metastable phases of water-quenched melts transformed into another metastable phase before reaching stable phases. A modification of the phase diagram is proposed.     

Cassiterite Solubility in High-Silica K2O-Al2O3-SiO2 Liquids

The saturation surface of cassiterite, SnO₂, was determined for liquids in the system K₂O–Al₂O₃–SiO₂ as a function of bulk composition and temperature. At fixed K₂O/Al₂O₃ cassiterite solubility varies weakly with SiO₂ concentration (76 to 84 mol%), temperature (1350° to 1550°C), and log ( f _O2) (−0.7 to −5.3). Cassiterite solubility is also approximately independent of composition in liquids with molar ratios of K₂O/Al₂O₃ lessthan equal to 1 (peraluminous liquids). As K₂O/Al₂O₃ increases from 1 (peralkaline liquids), however, cassiterite solubility increases steeply and approximately linearly with K₂O in excess of Al₂O₃. It is proposed that potassium in excess of aluminum combines with Sn⁴⁺ to form quasi-molecular complexes with an effective stoichiometry of K₄SnO₄.     

The Al2O3-Nd2O3 Phase Diagram

A tentative phase diagram for the system Al₂0₃-Nd₂O₃ is presented. Three compounds were obtained: a β -A1₂O₃-type compound, the perovskite NdAlO₃, and Nd₄Al₂O₉. The perovskite melts congruently (mp 2090°C), and the two other compounds exhibit incongruent melting behavior: β -Nd/Al₂O₃, mp 1900°C; Nd₄Al₂O₉, mp 1905°C. Two eutectics exist with the following compositions and melting points: 80 mol% Al₂O₃, 1750°C; 23 mol% Al₂O₃,1800°C. Nd₄Al₂O9 decomposes in the solid state at 1780°C.     

Phase Equilibrium Relationships in a Portion of the System MgO–Al2O3–2CaO·SiO2

The system MgO–Al₂O₃–2CaO·SiO₂ comprises a plane through the tetrahedron CaO–MgO–Al₂O₃–SiO₂. A total of 108 compositions were prepared having an alumina content below the line joining 2CaO·Al₂O₃SiO₂ (gehlenite) and MgO·Al₂O₃ (spinel). Quenching experiments were carried out on 96 of these compositions at temperatures up to 1590°C. Three binary eutectic systems and two ternary eutectic systems are described. Compositions on this plane are of significance in an investigation of the constitution of basic refractory clinkers made from Canadian dolomitic magnesites. They also concern the compositions of certain blast furnace slags.     

Formation and Transformation of δ-Ta2O5 Solid Solution in the System Ta2O5-Al2O3

In the system Ta₂O₃-Al₂O₅ solid solutions of metastable δ-Ta₂O₅ (hexagonal) are formed up to 50 mol% Al₂O₃ from amorphous materials prepared by the simultaneous hydrolysis of tantalum and aluminum alkoxides. The values of the lattice parameters decrease linearly with increasing Al₂O₃, content. The to β-Ta₂O₅ (orthorhombic, low-temperature form) transformation occurs at ∼950°C. The solid solution containing 50 mol% Al₂O₃ transforms at 1040° to 1100°C to orthorhombic TaAlO₄. Orthorhombic TaAlO₄ contains octahedral TaO₆ groups in the structure.     

Crystallization Behavior of Al2O3 in the Presence or SiO2

The independent crystallization sequence of an Al₂O₃ component is modified in the presence of SiO₂ and vice versa. Mixed SiO₂-Al₂O₃, gel (28 wt% SiO₂ and 72 wt% Al₂O₃) forms neither cristobalite nor γ-Al₂O₃ and corundum at 1000°C but forms Si-Al spinel; an amorphous aluminosilicate phase invariably also forms after the gel is heated. However, the composition of this amorphous aluminosilicate phase is not as yet known.