Destabilization of LiBH4 by MH2 (M = Ce, La) for hydrogen storage: Nanostructural effects on the hydrogen sorption kinetics

Destabilization of LiBH₄ by addition of metal hydrides or borohydrides is a powerful strategy to develop new promising hydrogen storage systems. In this study, we compare the destabilization behavior of the LiBH₄ by addition of MH₂ (M = La, Ce). A notable improvement in the hydrogen desorption temperature, the rate and the weight percentage of hydrogen released is observed for LiBH₄-MH₂ with respect to LiBH₄. Formation of LaB₆ and CeB₆ after dehydriding of the composites is proved by PXRD. Remarkable hydrogen storage reversibility of LiBH₄-MH₂ composites is confirmed under moderate conditions: 400 °C and 6.0 MPa of hydrogen pressure for 4 h without catalyst. The LiBH₄-LaH₂ composite exhibits improved hydrogen desorption performance compared with LiBH₄-CeH₂ composite, but the hydrogen storage reversibility is inferior. Notably, the LiBH₄-CeH₂ nanocomposite produced by in situ formation of CeH₂ from Ce(BH₄)₃-LiH displays excellent hydrogen storage properties. The addition of ZrCl₄ as a catalyst improves dehydriding kinetics. The mechanism underlying the enhancement in the LiBH₄-MH₂ composites is also discussed. Our study is the first work about reversible hydrogen storage in LiBH₄-LaH₂.     

Improved hydrogen storage reversibility of LiBH4 destabilized by Y(BH4)3 and YH3

In the present study, the synthesis of two different LiBH₄–Y(BH₄)₃ and LiBH₄–YH₃ composites was performed by mechanochemical processing of the 4LiBH₄–YCl₃ mixture and as-milled 4LiBH₄–YCl₃ plus 3LiH. It was found that Y(BH₄)₃ and YH₃ formed in situ during milling are effective to promote LiBH₄ destabilization but differ substantially from each other in terms of the dehydrogenation pathway. During LiBH₄–Y(BH₄)₃ dehydriding, Y(BH₄)₃ decomposes first generating in situ freshly YH₃ and subsequently, it destabilizes LiBH₄ with the formation of minor amounts of YB₄. About 20% of the theoretical hydrogen storage was obtained via the rehydriding of YB₄–4LiH–3LiCl at 400 °C and 6.5 MPa. As a novel result, a compound containing (B₁₂H₁₂)²⁻ group was identified during dehydriding of Y(BH₄)₃. In the case of 4LiBH₄–YH₃ dehydrogenation, the increase of the hydrogen back pressure favors the formation of crystalline YB_4, whereas a reduction to ≤0.1 MPa induces the formation of minor amounts of Li₂B₁₂H₁₂. Although for hydrogen pressures ≤0.1 MPa direct LiBH₄ decomposition can occur, the main dehydriding pathway of 4LiBH₄–YH₃ composite yields YB₄ and LiH. The nanostructured composite obtained by mechanochemical processing gives good hydrogen storage reversibility (about 80%) regardless of the hydrogen back pressure.     

Preparation and dehydrogenation properties of two cobalt-based ammine borohydrides: CoCl3·3NH3/3LiBH4 and CoCl2·3NH3/2LiBH4

Two new cobalt-based ammine borohydrides were prepared via ball milling of LiBH₄ and CoCl_n·3NH₃ (n = 3, 2) with molar ratios of 3:1 and 2:1, respectively. X-ray diffraction (XRD) results revealed the as-prepared composites having amorphous state. Thermogravimetric analysis-mass spectrometry (TG-MS) measurements showed that the two composites mainly release H₂, concurrent with the evolution of a small amount of NH₃. Further results showed that the excessive addition of LiBH₄ can suppress the liberation of NH₃, resulting in the release of H₂ with a high purity (>99 mol.%). By combination with the temperature-programmed-desorption (TPD) results, the CoCl₃·3NH₃/4LiBH₄ and CoCl₂·3NH₃/3LiBH₄composites can release 7.3 wt.% (4.2 wt.% including LiCl) and 4.2 wt.% (2.0 wt.% including LiCl) pure hydrogen, respectively, in the temperature range of 25–300 °C. Isothermal dehydrogenation results reveal that CoCl₃·3NH₃/3LiBH₄ shows favorable dehydrogenation rate at low temperatures, releasing about 5.2 wt.% (2.9 wt.% including LiCl) of hydrogen within 45 min at 80 °C.     

Enhanced hydrogen storage properties of LiBH4 modified by NbF5

In this work, the hydriding–dehydriding properties of the LiBH₄–NbF₅ mixtures were investigated. It was found that the dehydrogenation and reversibility properties of LiBH₄ were significantly improved by NbF₅. Temperature-programed dehydrogenation (TPD) showed that 5LiBH₄–NbF₅ sample started releasing hydrogen from as low as 60 °C, and 4 wt.% hydrogen could be obtained below 255 °C. Meanwhile, ∼7 wt.% H₂ could be reached at 400 °C in 20LiBH₄–NbF₅ sample, whereas pristine LiBH₄ only released ∼0.7 wt.% H₂. In addition, reversibility measurement demonstrated that over 4.4 wt.% H₂ could still be released even during the fifth dehydrogenation in 20LiBH₄–NbF₅ sample. The experimental results suggested that a new borohydride possibly formed during ball milling the LiBH₄–NbF₅ mixtures might be the source of the active effect of NbF₅ on LiBH₄.     

Hydrogen desorption from LiBH4 destabilized by chlorides of transition metal Fe,Co, and Ni

The dehydrogenation temperature of LiBH₄ was considerably decreased to 230 °C–300 °C when it was manually mixed with FeCl₂, CoCl₂ and NiCl₂ in a molar ratio of 2:1. Mixing LiBH₄ with NiCl₂ or FeCl₂ led to complete hydrogen desorption from LiBH₄, i.e. 18.3 wt% hydrogen was achieved with respect to the weight of LiBH₄. However, the CoCl₂ addition resulted in less hydrogen release due to the formation of diborane. Ball milling treatment for the mixtures of LiBH₄ and these chlorides further decreased hydrogen desorption temperatures. The results indicate that LiBH₄ could be effectively destabilized by the chlorides of Fe, Co and Ni. Small doping of these chlorides into LiBH₄ was found to be effective in enhancing dehydrogenation kinetics of the remaining LiBH₄ due to the formation of metal borides.     

Hydrogen storage behavior of 2LiBH4/MgH2 composites improved by the catalysis of CoNiB nanoparticles

2LiBH₄/MgH₂ system is a representative and promising reactive hydride composite for hydrogen storage. However, the high desorption temperature and sluggish desorption kinetics hamper its practical application. In our present report, we successfully introduce CoNiB nanoparticles as catalysts to improve the dehydrogenation performances of the 2LiBH₄/MgH₂ composite. The sample with CoNiB additives shows a significant desorption property. Temperature programmed desorption (TPD) measurement demonstrates that the peak decomposition temperatures of MgH₂ and LiBH₄ are lowered to be 315 °C and 417 °C for the CoNiB-doped 2LiBH₄/MgH₂. Isothermal dehydrogenation analysis demonstrates that approximately 10.2 wt% hydrogen can be released within 360 min at 400 °C. In addition, this study gives a preliminary evidence for understanding the CoNiB catalytic mechanism of 2LiBH₄/MgH₂     

Enhanced dehydrogenation properties of LiBH4 compositing with hydrogenated magnesium-rare earth compounds

LiBH₄ is regarded as a promising hydrogen storage material due to its high hydrogen density. In this study, the dehydrogenation properties of LiBH₄ were remarkably enhanced by doping hydrogenated Mg₃RE compounds (RE denotes La, Ce, Nd rare earth metals), which are composed of nanostructured MgH₂ and REH_2+x (denoted as H − Mg₃RE). For the LiBH₄ + H − Mg₃La mixture, the component LiBH₄ desorbed 6 wt.% hydrogen even at a relatively low temperature of 340 °C, far lower than the desorption temperature of pure LiBH₄ or the 2LiBH₄ + MgH₂ system. This kinetic improvement is attributed to the hydrogen exchange mechanism between the H − Mg₃La and LiBH₄, in the sense that the decomposition of MgH₂ and LaH_2+x catalyzed the dehydrogenation of LiBH₄ through hydrogen exchange effect rather than mutual chemical reaction requiring higher temperature and hydrogen pressure. However, prior to fast hydrogen release, the hydrogen exchange effect suppressed the dehydriding of MgH₂ and elevated its desorption temperature. It is expected to strengthen the hydrogen exchange effect by compositing the LiBH₄ with other nanosized metal hydrides and to obtain better dehydrogenation properties.     

Hydrogen storage performance of LiBH4+1/2MgH2 composites improved by Ce-based additives

LiBH₄+1/2MgH₂ is a promising reactive hydride composite for hydrogen storage. In the present study, three Ce-based additives were used as catalysts to enhance the hydrogen storage performance of LiBH₄+1/2MgH₂ composites. The composites with Ce additives demonstrated significantly improved dehydrogenation kinetics and cyclic stability compared with the pure composite. X-ray diffraction and scanning electron microscopy analyses clearly revealed the phase transitions and morphological evolution during the hydriding-dehydriding cycling. The composites with Ce-based additives displayed stable nanostructures, in contrast to the rapid microstructural deterioration in the uncatalyzed composite. The CeB₆ formed in the composites had a particle size of 10 nm after five cycles. It may act as the nucleus for MgB₂ formation during dehydrogenation and thus account for the structural and performance stability of the composites upon cycling.     

Reversible hydrogen storage in LiBH4/Ca(AlH4)2 systems

To improve the hydrogen storage property of LiBH₄, the LiBH₄/Ca(AlH₄)₂ reactive systems with various ratios were constructed, and their de-/hydrogenation properties as well as the reaction mechanisms were investigated experimentally. It was found that the sample with the LiBH₄ to Ca(AlH₄)₂ molar ratio of 6:1 exhibits the best comprehensive hydrogen storage properties, desorbing hydrogen completely (8.2 wt.%) within 35 min at 450 °C and reversibly absorbing 4.5 wt.% of hydrogen at 450 °C under a hydrogen pressure as low as 4.0 MPa. During the first dehydrogenation process of the LiBH₄/Ca(AlH₄)₂ systems, the CaH₂ and Al particles were in situ precipitated via the self-decomposition of Ca(AlH₄)₂, and then reacted with LiBH₄ to form CaB₆, AlB₂ and LiH. Whereafter, the sample can cycle between LiBH₄ + Ca(BH₄)₂ + Al in the hydrogenated state and CaB₆ + AlB₂ + LiH in the dehydrogenated state.     

Hydrogen storage performance of 5LiBH4 + Mg2FeH6 composite system

The hydrogen storage properties of 5LiBH₄ + Mg₂FeH₆ reactive hydride composites for reversible hydrogen storage were investigated by comparing with the 2LiBH₄ + MgH₂ composite in the present work. The dehydrogenation pathway and reaction mechanism of 5LiBH₄ + Mg₂FeH₆ composite were also investigated and elucidated. The self-decomposition of Mg₂FeH₆ leads to the in situ formation of Mg and Fe particles on the surface of LiBH₄, resulting in a well dispersion between different reacting phases. The formation of FeB is observed during the dehydrogenation of 5LiBH₄ + Mg₂FeH₆ composite, which might supplies nucleation sites of MgB₂ during the dehydrogenation process, but is not an ascendant catalyst for the self-decomposition of LiBH₄. And FeB can also transform to the LiBH₄ and Fe by reacting with LiH and H₂ during the rehydrogenation process. The dehydrogenation capacity for 5LiBH₄ + Mg₂FeH₆ composite still gets to 6.5 wt% even after four cycles. The X-ray diffraction analyses reveal the phase transitions during the hydriding and dehydriding cycle. The formed FeB in the composite maintains a nanostructure after four hydriding-dehydriding cycles. The loss of hydrogen storage capacity and de-/rehydrogenation kinetics can be attributed to the incomplete generation of Mg₂FeH₆ during the rehydrogenation process.     

NH3BH3/LiBH4·NH3 modified by metal hydrides for advanced dehydrogenation

The significantly enhanced dehydrogenation performance of binary complex system, NH₃BH₃/LiBH₄·NH₃, were achieved through a chemical modification of LiH to form ternary composites of x (LiH–NH₃BH₃)/LiBH₄·NH₃. Among the studied composites, 3LiH–3NH₃BH₃/LiBH₄·NH₃ released ca. 10 wt. % high-pure hydrogen (>99.9 mol%) below 100 °C with fast kinetics, while less than 8 wt. % hydrogen, accompanied with a fair number of volatile byproducts, were released from 3NH₃BH₃/LiBH₄·NH₃ at the same conditions. Further investigations revealed that the hydrogen emission from x (LiH–NH₃BH₃)/LiBH₄·NH₃ composites is based on the combination mechanism of H^δ+ and H^δ− through the interaction between LiH–NH₃BH₃ and NH₃ group in LiBH₄·NH₃, in which the controllable protic hydrogen source from the stabilized NH₃ group played a crucial role in providing optimal stoichiometric ratio of H^δ+ and H^δ−, and thus leading to the significant improvement of dehydrogenation capacity and purity.     

Mechanistic investigations on significantly improved hydrogen storage performance of the Ca(BH4)2-added 2LiNH2/MgH2 system

The hydrogen storage properties and mechanisms of the Ca(BH₄)₂-added 2LiNH₂–MgH₂ system were systematically investigated. The results showed that the addition of Ca(BH₄)₂ pronouncedly improved hydrogen storage properties of the 2LiNH₂–MgH₂ system. The onset temperature for dehydrogenation of the 2LiNH₂–MgH₂–0.3Ca(BH₄)₂ sample is only 80 °C, a ca. 40 °C decline with respect to the pristine sample. Further hydrogenation examination indicated that the dehydrogenated 2LiNH₂–MgH₂–0.1Ca(BH₄)₂ sample could absorb ca. 4.7 wt% of hydrogen at 160 °C and 100 atm while only 0.8 wt% of hydrogen was recharged into the dehydrogenated pristine sample under the same conditions. Structural analyses revealed that during ball milling, a metathesis reaction between Ca(BH₄)₂ and LiNH₂ firstly occurred to convert to Ca(NH₂)₂ and LiBH₄, and then, the newly developed LiBH₄ reacted with LiNH₂ to form Li₄(BH₄)(NH₂)₃. Upon heating, the in situ formed Ca(NH₂)₂ and Li₄(BH₄)(NH₂)₃ work together to significantly decrease the operating temperatures for hydrogen storage in the Ca(BH₄)₂-added 2LiNH₂–MgH₂ system.     

Remarkable irreversible and reversible dehydrogenation of LiBH4 by doping with nanosized cobalt metalloid compounds

Nanosized cobalt sulfide and cobalt boride were synthesized and doped into LiBH₄ to improve the dehydrogenation properties of this important candidate for hydrogen storage. With respect to CoS_x doping, the dehydrogenation temperature (peak temperature observed by mass spectrometry) of pristine LiBH₄ can be reduced from 440 °C to 175 °C with a maximum capacity of 6.7 wt% at 50% doping. Unfortunately, B₂H₆ is liberated and the process is not reversible because the CoS_x dopant reacts with LiBH₄ to form more stable compounds. By changing CoS_x to CoB_x, a reversible dehydrogenation was realized with greatly improved reversibility. The dehydrogenation temperature was reduced to 350 °C with a maximum capacity of 8.4 wt% at 50% doping amount. It is very significant that CoB_x is stable and the release of B₂H₆ is eliminated. A reversible hydrogen desorption of about 5.3 wt% can be achieved with a LiBH₄ + 50% CoB_x mixture under a mild rehydrogenation condition of 400 °C at 10 MPa H₂. It is obvious that CoS_x acts as a reactant even though the dehydrogenation is greatly enhanced, while CoB_x behaves as a catalyst significantly promoting the dehydrogenation and reversibility of LiBH₄.     

A comparative study of LiBH4-based composites with metal hydrides and fluorides for hydrogen storage

A comparative study was performed on four LiBH₄-based hydrogen storage composites 2LiBH₄ + MgX₂ and 6LiBH₄ + CaX₂ (X = H and F). The composites with fluorides and those with corresponding hydrides exhibited similar hydrogen storage properties. The dehydrogenation of 2LiBH₄ + MgF₂ demonstrated a strong dependence on the hydrogen back pressure, similar to that of 2LiBH₄ + MgH₂. The reversible hydrogen storage of 2LiBH₄ + MgF₂ was achieved under a back pressure of 5 bar at 450 °C. Dehydrogenation under lower H₂ pressures resulted in the production of Mg and thus a partial reversibility. In contrast, both 6LiBH₄ + CaH₂ and 6LiBH₄ + CaF₂ revealed reversible hydrogen storage properties regardless of the hydrogen back pressure. The structural difference between MgB₂ and CaB₆ may account for the observed differences in hydrogen storage properties of the Mg- and Ca-containing LiBH₄ reactive composites.     

Enhanced hydrogen storage properties of LiBH4-MgH2 composite by the catalytic effect of MoCl3

Though LiBH₄-MgH₂ system exhibits an excellent hydrogen storage property, it still presents high decomposition temperature over 350 °C and sluggish hydrogen absorption/desorption kinetics. In order to improve the hydrogen storage properties, the influence of MoCl₃ as an additive on the hydrogenation and dehydrogenation properties of LiBH₄-MgH₂ system is investigated. The reversible hydrogen storage performance is significantly improved, which leads to a capacity of about 7 wt.% hydrogen at 300 °C. XRD analysis reveals that the metallic Mo is formed by the reaction between LiBH₄ and MoCl₃, which is highly dispersed in the sample and results in improved dehydrogenation and hydrogenation performance of LiBH₄-MgH₂ system. From Kissinger plot, the activation energy for hydrogen desorption of LiBH₄-MgH₂ system with additive MoCl₃ is estimated to be ∼43 kJ mol⁻¹ H₂, 10 kJ mol⁻¹ lower than that for the pure LiBH₄-MgH₂ system indicating that the kinetics of LiBH₄-MgH₂ composite is significantly improved by the introduction of Mo.     

Reversible hydrogen storage in a 3NaBH4/YF3 composite

A 3NaBH₄/YF₃ hydrogen storage composite was prepared through ball milling and its hydrogen sorption properties were investigated. It is shown that NaBH₄ does not react with YF₃ during ball milling. The dehydrogenation of the composite starts at 423 °C, which is about 100 °C lower than the dehydrogenation temperature of pure NaBH₄, with a mass loss of 4.12 wt%. Pressure–Composition–Temperature tests reveal that the composite has reversible hydrogen sorption performance in the temperature range from 350 °C to 413 °C and under quite low hydrogenation plateau pressures (<1 MPa). Its maximum hydrogen storage capacity can reach up to 3.52 wt%. The dehydrogenated composite can absorb 3.2 wt% of hydrogen within 5 min at 400 °C. Based on the Pressure–Composition–Temperature analyses, the hydrogenation enthalpy of the composite is determined to be −46.05 kJ/mol H₂, while the dehydrogenation enthalpy is 176.76 kJ/mol H₂. The mechanism of reversible hydrogen sorption in the composite involves the decomposition and regeneration of NaBH₄ through the reaction with YF₃. Therefore, the addition of the YF₃ to NaBH₄ as a reagent forms a reversible hydrogen storage composite.     

Enhanced dehydrogenation and rehydrogenation properties of LiBH4 catalyzed by graphene

The investigation of thermally induced dehydrogenation of LiBH₄ reveals that LiBH₄ doped with the graphene catalysts shows superior dehydrogenation and rehydrogenation performance to that of Vulcan XC-72, carbon nanotube and BP2000 doped LiBH₄. For doping with 20 wt.% graphene, thermal dehydrogenation of LiBH₄ is found to start at ca. 230 °C and a total weight loss of 11.4 wt.% can be obtained below 700 °C. With increased loading of graphene within a LiBH₄ sample, the onset dehydrogenation temperature and the two main desorption peaks from LiBH₄ are found to decrease while the hydrogen release amount is found to increase. Moreover, variation of the equilibrium pressure obtained from isotherms measured at 350–450 °C indicate the dehydrogenation enthalpy is reduced from 74 kJ mol⁻¹ H₂ for pure LiBH₄ to ca. 40 kJ mol⁻¹ H₂ for 20 wt.% graphene doped LiBH₄. Importantly, the reversible dehydrogenation/rehydrogenation process was achieved under 3 MPa H₂ at 400 °C for 10 h, with a capacity of ca. 4.0 wt.% in the tenth cycle. Especially, LiBH₄ is reformed and new species, Li₂B₁₀H₁₀, is detected after the rehydrogenation process.     

Hydrogen generation from the ball milled composites of sodium and lithium borohydride (NaBH4/LiBH4) and magnesium hydroxide (Mg(OH)2) without and with the nanometric nickel (Ni) additive

The composites of (NaBH₄+2Mg(OH)₂) and (LiBH₄+2Mg(OH)₂) without and with nanometric Ni (n-Ni) added as a potential catalyst were synthesized by high energy ball milling. The ball milled NaBH₄-based composite desorbs hydrogen in one exothermic reaction in contrast to its LiBH₄-based counterpart which dehydrogenates in two reactions: an exothermic and endothermic. The NaBH₄-based composite starts desorbing hydrogen at 240 °C. Its ball milled LiBH₄-based counterpart starts desorbing at 200 °C. The latter initially desorbs hydrogen rapidly but then the rate of desorption suddenly decelerates. The estimated apparent activation energy for the NaBH₄-based composite without and with n-Ni is equal to 152 ± 2.2 and 157 ± 0.9 kJ/mol, respectively. In contrast, the apparent activation energy for the initial rapid dehydrogenation for the LiBH₄-based composite is very low being equal to 47 ± 2 and 38 ± 9 kJ/mol for the composite without and with the n-Ni additive, respectively. XRD phase studies after volumetric isothermal dehydrogenation tests show the presence of NaBO₂ and MgO for the NaBH₄-based composite. For the LiBH₄-based composite phases such as MgO, Li₃BO₃, MgB₂, MgB₆ are the products of the first exothermic reaction which has a theoretical H₂ capacity of 8.1 wt.%. However, for reasons which are not quite clear, the first reaction never goes to full completion even at 300 °C desorbing ∼4.5 wt.% H₂ at this temperature. The products of the second endothermic reaction for the LiBH₄-based composite are MgO, MgB₆, B and LiMgBO₃ and the reaction has a theoretical H₂ capacity of 2.26 wt.%. The effect of the addition of 5 wt.% nanometric Ni on the dehydrogenation behavior of both the NaBH₄-and LiBH₄-based composites is rather negligible. The n-Ni additive may not be the optimal catalyst for these hydride composite systems although more tests are required since only one n-Ni content was examined.     

LiBH4·NH3BH3: A new lithium borohydride ammonia borane compound with a novel structure and favorable hydrogen storage properties

Mechanically milling ammonia borane and lithium borohydride in equivalent molar ratio results in the formation of a new complex, LiBH₄·NH₃BH₃. Its structure was successfully determined using combined X-ray diffraction and first-principles calculations. LiBH₄·NH₃BH₃ was carefully studied in terms of its decomposition behavior and reversible dehydrogenation property, particularly in comparison with the component phases. In parallel to the property examination, X-ray diffraction and Fourier transformation infrared spectroscopy techniques were employed to monitor the phase evolution and bonding structure changes in the reaction process. Our study found that LiBH₄·NH₃BH₃ first disproportionates into (LiBH₄)₂·NH₃BH₃ and NH₃BH₃, and the resulting mixture exhibits a three-step decomposition behavior upon heating to 450 °C, totally yielding ∼15.7 wt% hydrogen. Interestingly, it was found that h-BN was formed at such a moderate temperature. And owing to the in situ formation of h-BN, LiBH₄·NH₃BH₃ exhibits significantly improved reversible dehydrogenation properties in comparison with the LiBH₄ phase.     

Nanoconfinement of LiBH4·NH3 towards enhanced hydrogen generation

Successful synthesis of LiBH₄·NH₃ confined in nanoporous silicon dioxide (LiBH₄·NH₃@SiO₂) was achieved via a new “ammonia-deliquescence” method, which avoids the involvement of any solvents during the process of synthesis. Compared to the pure LiBH₄·NH₃, the confined LiBH₄·NH₃@SiO₂ exhibited significantly improved dehydrogenation properties, which not only suppressed the emission of NH₃, but also decreased the onset dehydrogenation temperature to 60 °C, thus leading to an enhanced conversion of NH₃ to H₂. In the temperature range of 60–300 °C, the mole ratio of H₂ release for the confined LiBH₄·NH₃@SiO₂ is 85 mol % of the total gas evolved, compared to 2.66 mol % for the pristine LiBH₄·NH₃. Isothermal dehydrogenation results showed that the LiBH₄·NH₃@SiO₂ is able to release about 1.26, 2.09, and 2.35 equiv. of hydrogen, at 150 °C, 200 °C, and 250 °C, respectively. From analysis of the Fourier transform infrared, Raman, and nuclear magnetic resonance spectra of the confined LiBH₄·NH₃@SiO₂ sample heated to various temperatures, as well as its dehydrogenation product under NH₃ atmosphere, it is proposed that the improved dehydrogenation of LiBH₄·NH₃@SiO₂ is mainly attributable to two crucial factors resulting from the nanoconfinement: (1) stabilization of the NH₃ in the nanopores of SiO₂, and (2) enhanced combination of LiBH₄ and NH₃ groups, leading to fast dehydrogenation at low temperature.