Catalytic hydrolysis of hydrazine borane for chemical hydrogen storage: Highly efficient and fast hydrogen generation system at room temperature

There has been rapidly growing interest for materials suitable to store hydrogen in solid state for transportation of hydrogen that requires materials with high volumetric and gravimetric storage capacity. B-N compounds such as ammonia-triborane, ammonia-borane and amine-borane adducts are well suited for this purpose due to their light weight, high gravimetric hydrogen storage capacity and inclination for bearing protic (N-H) and hydridic (B-H) hydrogens. In addition to them, more recent study [26] has showed that hydrazine borane with a gravimetric hydrogen storage capacity of 15.4% wt needs to be considered as another B-N compound that can be used for the storage of hydrogen. Herein we report for the first time, metal catalyzed hydrolysis of hydrazine borane (N₂H₄BH₃, HB) under air at room temperature. Among the catalyst systems tested, rhodium(III) chloride was found to provide the highest catalytic activity in this reaction. In the presence of rhodium(III) chloride, the aqueous solution of hydrazine borane undergoes fast hydrolysis to release nearly 3.0 equivalent of H₂ at room temperature with previously unprecedented H₂ generation rate TOF = 12000 h⁻¹. More importantly, it was found that in the catalytic hydrolysis of hydrazine borane the reaction between hydrazine borane and water proceeds almost in stoichiometric proportion indicating that the efficient hydrogen generation can be achieved even from the highly concentrated solution of hydrazine borane or in the solid state when water added to the solid hydrazine borane. This finding is crucial especially for on-board application of the existing system. The work reported here also includes (i) finding the solubility of hydrazine borane plus its stability against self-hydrolysis in water, (ii) the definition of reaction stoichiometry and the identification of reaction products for the catalytic hydrolysis of hydrazine borane, (iii) the collection of wealthy kinetic data to demonstrate the effect of substrate and catalyst concentrations on the hydrogen generation rate and to determine the rate law for the catalytic hydrolysis of hydrazine borane, (iv) the investigation of the effect of temperature on the rate of hydrogen generation and determination of activation parameters (E_a, ΔH^#, and ΔS^#) for the catalytic hydrolysis of hydrazine borane.     

Chemical kinetics of Ru-catalyzed ammonia borane hydrolysis

Ammonia borane (AB) is a candidate material for on-board hydrogen storage, and hydrolysis is one of the potential processes by which the hydrogen may be released. This paper presents hydrogen generation measurements from the hydrolysis of dilute AB aqueous solutions catalyzed by ruthenium supported on carbon. Reaction kinetics necessary for the design of hydrolysis reactors were derived from the measurements. The hydrolysis had reaction orders greater than zero but less than unity in the temperature range from 16 °C to 55 °C. A Langmuir–Hinshelwood kinetic model was adopted to interpret the data with parameters determined by a non-linear conjugate-gradient minimization algorithm. The ruthenium-catalyzed AB hydrolysis was found to have activation energy of 76 ± 0.1 kJ mol⁻¹ and adsorption energy of −42.3 ± 0.33 kJ mol⁻¹. The observed hydrogen release rates were 843 ml H₂ min⁻¹ (g catalyst)⁻¹ and 8327 ml H₂ min⁻¹ (g catalyst)⁻¹ at 25 °C and 55 °C, respectively. The hydrogen release from AB catalyzed by ruthenium supported on carbon is significantly faster than that catalyzed by cobalt supported on alumina. Finally, the kinetic rate of hydrogen release by AB hydrolysis is much faster than that of hydrogen release by base-stabilized sodium borohydride hydrolysis.     

Theoretical studies on hydrogen adsorption properties of lithium decorated diborene (B2H4Li2) and diboryne (B2H2Li2)

Using ab initio based quantum chemical calculations, we have studied the structure, stability and hydrogen adsorption properties of different boron hydrides decorated with lithium, examples of the corresponding anions being dihydrodiborate dianion, B₂H₂²⁻ and tetrahydrodiborate dianion, B₂H₄²⁻ which can be considered to be analogues and isoelectronic to acetylene (C₂H₂) and ethelene (C₂H₄) respectively. It is shown that there exists a B-B double bond in B₂H₄Li₂ and a B-B triple bond in B₂H₂Li₂. In both the complexes, the lithium sites are found to be cationic in nature and the calculated lithium ion binding energies are found to be very high. The cationic sites in these complexes are found to interact with molecular hydrogen through ion-quadrupole and ion-induced dipole interactions. In both the complexes, each lithium site is found to bind a maximum of three hydrogen molecules which corresponds to a gravimetric density of ∼23 wt% in B₂H₄Li₂ and ∼24 wt% in B₂H₂Li₂. We have also studied the hydrogen adsorption in a model one-dimensional nanowire with C₆H₄B₂Li₂ as the repeating unit and found that it can adsorb hydrogen to the extent 9.68 wt% and the adsorption energy is found to be −2.34 kcal/mol per molecular hydrogen.     

Density functional studies on the hydrogen storage capacity of boranes and alanes based cages

The hydrogen storage (H-storage) capacity of various boranes and alanes have been investigated using density functional theory (DFT) based M05-2X method employing 6–31+G** basis set. The changes in the H-storage capacities of borane and alane upon substitution of antipodal atoms in the cages by C, Si, and N have also been investigated. It is found from the calculations that a maximum of 20 H₂ molecules can be adsorbed on the deltahedron faces of these cages. The maximum gravimetric density has been observed for boranes when compared to alanes. The H-storage capacity of closo-borane dianion [B₁₂H₁₂]²⁻, monocarborane [CB₁₁H₁₂]¹⁻, dicarborane [C₂B₁₀H₁₂], and closo-azaborane [NB₁₁H₁₂] cages is almost similar (∼22 wt.%). Among these cages, B_BB dianion show higher binding energy (BE) and BE per H₂ molecule (BE/nH₂) which are 181.06 and 9.03 kJ/mol, respectively. In the case of alanes, dicarbalane [C₂Al₁₀H₁₂] has maximum H-storage capacity of 11.6 wt.%. Based on these findings, a new MOF with carborane (MOF-5_CC) as linker has been designed. The calculation on the new MOF-5B_CC reveals that it has H-storage capacity of 6.4 wt.% with BE/nH₂ of 3.02 kJ/mol.     

Hydrogen generation from the hydrolysis of ammonia borane using cobalt-nickel-phosphorus (Co-Ni-P) catalyst supported on Pd-activated TiO2 by electroless deposition

Catalytically active, low-cost, and reusable transition metal catalysts are desired to develop on-demand hydrogen generation system for practical onboard applications. By using electroless deposition method, we have prepared the Pd-activated TiO₂-supported Co-Ni-P ternary alloy catalyst (Co-Ni-P/Pd-TiO₂) that can effectively promote the hydrogen release from ammonia-borane aqueous solution. Co-Ni-P/Pd-TiO₂ catalysts are stable enough to be isolated as solid materials and characterized by XRD, SEM, and EDX. They are isolable, redispersible and reusable as an active catalyst in the hydrolysis of AB. The reported work also includes the full experimental details for the collection of a wealth of kinetic data to determine the activation energy (E_a = 54.9 kJ mol⁻¹) and effects of the amount of catalyst, amount of substrate, and temperature on the rate for the catalytic hydrolysis of AB. Maximum H₂ generation rate of ∼60 mL H₂ min⁻¹ (g catalyst)⁻¹ and ∼400 mL H₂ min⁻¹ (g catalyst)⁻¹ was measured by the hydrolysis of AB at 25 °C and 55 °C, respectively.     

Diammonium tetraborate dihydrate as hydrolytic by-product of ammonia borane in aqueous alkaline conditions

Ammonia borane NH₃BH₃ is able to generate H₂ by catalytic hydrolysis at ambient conditions. Such a potential has been much studied but the hydrolysis by-products, i.e. ammonium borates, have been little studied. As such we undertook a systematic work aiming at getting a sound understanding of the borates forming by hydrolysis. Contrary to what is commonly believed, NH₃BH₃ (10 M) in aqueous alkaline (pH = 8) solution is not completely stable. Spontaneous hydrolysis takes place, resulting in the formation of by-products and precipitation of borate crystals. This means that long-term storage of concentrated AB solution is not possible. The borate crystals were analyzed with the help of various techniques and was identified as being diammonium tetraborate dihydrate (NH₄)₂B₄O₅(OH)₄⋅2H₂O (263.39 g mol⁻¹). The crystal structure was solved and found to be monoclinic with a space group P2₁. The borate is an analog of borax Na₂B₄O₅(OH)₄⋅8H₂O. These results, among others, are reported in details hereafter and they are discussed in order to bring elements of response to the questions concerning storage of aqueous NH₃BH₃ and recyclability of such a borate.     

Hydrogen production from hydrolysis of ammonia borane with limited water supply

Effect of limited water supply to hydrolysis of ammonia borane for hydrogen evolution is studied over the cases in which the initial molar ratio of water to ammonia borane (H₂O/AB) is set at 1.28, 2.57 and 4.50. The conversion efficiency of ammonia borane to hydrogen is estimated from the accumulated volume of produced hydrogen gas and the quantitative analysis of hydrolysate by solid-state ¹¹B NMR. Characteristics of hydrogen evolution are significantly influenced by both water dosage and injection rate of water. In the case that water is a limiting agent, namely, H₂O/AB = 1.28, less hydrogen is produced than that predicted stoichiometrically. In contrast, conversion efficiency of ammonia borane reaches nearly 100% for the case with H₂O/AB = 4.50. Injection rate of water to ammonia borane also affect profoundly the produced volume and production rate of hydrogen, if water is used as a limiting agent in the hydrolysis of ammonia borane. Nonetheless, boric acid and metaboric acid are found to be the dominant products in the hydrolysate from XRD, FT-IR and solid-state ¹¹B NMR analysis. The hydrogen storage capacity using limited water supply in this work could reach as high as about 5.33 wt%, based on combined mass of reactants and catalyst.     

Hydro-catalytic treatment of organoamine boranes for efficient thermal dehydrogenation for hydrogen production

This study aims to present the hydro-catalytic treatment of organoamine boranes for efficient thermal dehydrogenation for hydrogen production. Organoamine boranes, methylamine borane (MeAB), and ethane 1,2 diamine borane (EDAB), known as ammonia borane (AB) carbon derivatives, are synthesized to be used as a solid-state hydrogen storage medium. Thermal dehydrogenation of MeAB and EDAB is performed at 80 °C, 100 °C, and 120 °C under different conditions (self, catalytic, and hydro-catalytic) for hydrogen production and compared with AB. For this purpose, a cobalt-doped activated carbon (Co-AC) catalyst is fabricated. The physicochemical properties of Co-AC catalyst is investigated by well-known techniques such as ATR/FT-IR, XRD, XPS, ICP-MS, BET, and TEM. The synthesized Co-AC catalyst obtained in nano CoOOH structure (20 nm, 12% Co wt) is formed and well-dispersed on the activated carbon support. It has indicated that Co-AC exhibits efficient catalytic activity towards organoamine boranes thermal dehydrogenation. Hydrogen release tests show that hydro-catalytic treatment improves the thermal dehydrogenation kinetics of neat MeAB, EDAB, and AB. Co-AC catalyzed hydro-treatment for thermal dehydrogenation of MeAB and EDAB acceleras the hydrogen release from 0.13 mL H₂/min to 46.12 mL H₂/min, from 0.16 mL H₂/min to 38.06 mL H₂/min, respectively at 80 °C. Moreover, hydro-catalytic treatment significantly lowers the H₂ release barrier of organoamine boranes thermal dehydrogenation, from 110 kJ/mol to 19 kJ/mol for MeAB and 130 kJ/mol to 21 kJ/mol for EDAB. In conclusion, hydro and catalytic treatment presents remarkable synergistic effect in thermal dehydrogenation and improves the hydrogen release kinetics.     

Hydrogen generation from the dehydrogenation of ammonia–borane in the presence of ruthenium(III) acetylacetonate forming a homogeneous catalyst

Starting with ruthenium(III) acetylacetonate a homogeneous catalyst is formed which catalyzes the release of 1 equivalent of hydrogen gas from the dehydrogenation of ammonia–borane in toluene solution at low temperature in the range 50–65 °C. Mercury poisoning experiments showed that the catalytic dehydrogenation of ammonia–borane starting with ruthenium(III) acetylacetonate is a homogeneous catalysis. The final product obtained after the catalytic dehydrogenation of ammonia borane was thoroughly characterized by using ¹¹B Nuclear Magnetic Resonance and Infrared spectroscopies. The homogeneous catalyst formed from the reduction of ruthenium(III) acetylacetonate provides 950 turnovers (TTO) over 58 h and 27 (mol H₂)(mol Ru)⁻¹(h)⁻¹ value of initial turnover frequency (TOF) in hydrogen generation from the dehydrogenation of ammonia–borane at 60 °C before deactivation. Kinetics of this homogenous catalytic dehydrogenation of ammonia–borane was studied depending on the catalyst concentration, substrate concentration, and temperature. The hydrogen generation was found to be first order with respect to both the substrate concentration and catalyst concentration. The activation parameters of this reaction were also determined from the evaluation of the kinetic data: activation energy; E_a = 48 ± 2 kJ mol⁻¹, the enthalpy of activation; ΔH^# = 45 ± 2 kJ mol⁻¹ and the entropy of activation ΔS^# = −152 ± 5 J mol⁻¹ K⁻¹.     

Ammonia borane as hydrogen storage materials

Ammonia borane is an appropriate solid hydrogen storage material because of its high hydrogen content of 19.6% wt., high stability under ambient conditions, nontoxicity, and high solubility in common solvents. Hydrolysis of ammonia borane appears to be the most efficient way of releasing hydrogen stored in it. Since ammonia borane is relatively stable against hydrolysis in aqueous solution, its hydrolytic dehydrogenation can be achieved at an appreciable rate only in the presence of suitable catalyst at room temperature. Metal(0) nanoparticles have high initial catalytic activity in releasing H₂ from ammonia borane. Thermodynamically instable metal(0) nanoparticles can kinetically be stabilized against agglomeration either by using ligands in solution or by supporting on the surface of solid materials with large surface area in solid state. Examples of both type of stabilization are presented from our own studies. The results show that metal(0) nanoparticles dispersed in solution or supported on suitable solid materials with large surface area can catalyze the release of H₂ from ammonia borane at room temperature. Dispersion of metal(0) nanoparticles, stabilized in liquid phase by anions or polymers, seems advantageous as providing more active sites compared to the metal nanoparticles supported on a solid surface. However, the supported metal nanoparticles are found to be more stable against agglomeration than the ones dispersed in liquid phase. Therefore, metal nanoparticles supported on solid materials have usually longer lifetime than the ones dispersed in solution. Examples are given from the own literature to show how to improve the catalytic activity and durability of metal nanoparticles by selecting suitable stabilizer or supporting materials for certain metal. For the time being, nanoceria supported rhodium(0) nanoparticles are the most active catalyst providing a turnover frequency of 2010 min^?1 in releasing H₂ from ammonia borane at room temperature.     

Borates in hydrolysis of ammonia borane

Ammonia borane NH₃BH₃ (19.5 wt% H) is able to release hydrogen by hydrolysis in the presence of a catalyst in ambient conditions. This reaction has received considerable attention since 2006, with special focus on the catalytic material. In comparison, important aspects like the nature of the hydrolysis by-product(s) have been much less investigated while a good identification of the borate(s) is required for approaching recyclability. In this context, we present a work based on a systematic approach that aims at characterizing the hydrolysate, its stability in time, and the borate(s) recovered after drying. It is shown that the hydrolysate consists in aqueous B(OH)₃ and that the solution (catalyst-free) is stable when stored 6 months under argon atmosphere at 30 °C. The extraction of the water from the hydrolysate was performed at different conditions (vacuum, or air; from −50 to 500 °C). It is observed that the higher the temperature, the lower the hydration degree of the borates. The total dehydration, with the formation of B₂O₃, can be obtained at heating at 500 °C. The main problem with the hydrolysate is the release of NH₃ during the drying stage. A solution is to remove NH₃ after hydrolysis and to dry the NH₃-free hydrolysate. By this way, H₃B₃O₆ forms. Hence, B₂O₃ and H₃B₃O₆ could be recovered and recycled into ammonia borane. Besides the identification of the borates, the suitability of ammonia borane for hydrogen production by hydrolysis is discussed, especially in comparison with sodium borohydride NaBH₄.     

Room temperature hydrolytic dehydrogenation of ammonia borane catalyzed by Co nanoparticles

Amorphous and well dispersed Co nanoparticles (less than 10 nm) have been in situ synthesized in aqueous solution at room temperature. The as-synthesized Co nanoparticles possess high catalytic activity (1116 L mol⁻¹ min⁻¹) and excellent recycling property for the hydrogen generation from aqueous solution of ammonia borane under ambient atmosphere at room temperature. The present low-cost catalyst, high hydrogen generation rate and mild reaction conditions (at room temperature in aqueous solution) represent a promising step toward the development of ammonia borane as a viable on-board hydrogen-storage and supply material.     

Zeolite confined copper(0) nanoclusters as cost-effective and reusable catalyst in hydrogen generation from the hydrolysis of ammonia-borane

Herein we report the development of a cost-effective nanocluster catalyst for the hydrolytic dehydrogenation of ammonia-borane which is considered to be one among the new hydrogen storage materials. Zeolite confined copper(0) nanoclusters were prepared by the ion-exchange of Cu²⁺ ions with the extra framework Na⁺ ions in zeolite-Y followed by reduction of the Cu²⁺ ions within the cavities of zeolite with sodium borohydride in aqueous solution and characterized by HR-TEM, XRD, XPS, SEM, EDX, ICP-OES, Raman spectroscopy and N₂ adsorption–desorption technique. Zeolite confined copper(0) nanoclusters are found to be active catalysts in the hydrolysis of ammonia-borane even at low temperatures (≤15 °C) and stable enough for being isolated as solid materials. They provide 1300 turnovers in hydrogen generation from the hydrolysis of ammonia–borane at room temperature. The average value of turnover frequency is 46.5 h⁻¹ for the same reaction. More importantly, zeolite confined copper(0) nanoclusters were found to be isolable, bottleable and reusable catalysts in the hydrolytic dehydrogenation of ammonia-borane; even at fifth run the complete release of hydrogen from the hydrolysis of ammonia-borane at room temperature is achieved. The work reported here also includes the full experimental details for the collection of a wealth of kinetic data to determine the activation energy and the effect of catalyst concentration on the rate for the catalytic hydrolysis of ammonia–borane.     

Hydrogen generation by hydrolysis of ammonia borane with a nanoporous cobalt-tungsten-boron-phosphorus catalyst supported on Ni foam

In this study, quaternary cobalt-tungsten-boron-phosphorus porous particles supported on Ni foam (Co-W-B-P/Ni), which are prepared through ultrasonification-assisted electroless deposition route, have been investigated as the catalyst for hydrogen generation (HG) from hydrolysis of ammonia borane (NH₃BH₃, AB). Compared with Ni-supported binary Co-B and ternary Co-W-B catalysts, the as-synthesized Co-W-B-P/Ni shows a higher HG rate. To optimize the preparation parameters, the molar ratio of NaBH₄/NaH₂PO₂·H₂O (B/P) and the concentration of Na₂WO₄·2H₂O (W) have been investigated and the catalyst prepared with B/P value of 1.5 and W concentration of 5 g L⁻¹ shows the highest activity. The results of kinetic studies show that the catalytic hydrolysis of AB is first order with respect to the catalyst and AB concentrations. By using the quaternary catalyst with a concentration of 0.5 wt % AB, a HG rate of 4.0 L min⁻¹ g⁻¹ is achieved at 30 °C. Moreover, the apparent activation energy for the quaternary catalyst is determined to be 29.0 kJ mol⁻¹, which is comparable to that of noble metal-based catalysts. These results indicate that the Co-W-B-P/Ni is a promising low-cost catalyst for on-board hydrogen generation from hydrolysis of borohydride.     

Ruthenium(0) nanoparticles supported on nanotitania as highly active and reusable catalyst in hydrogen generation from the hydrolysis of ammonia borane

Ruthenium(0) nanoparticles supported on the surface of titania nanospheres (Ru(0)/TiO₂) were in situ generated from the reduction of ruthenium(III) ions impregnated on nanotitania during the hydrolysis of ammonia borane. They were isolated from the reaction solution by centrifugation and characterized by a combination of advanced analytical techniques. The results reveal that highly dispersed ruthenium(0) nanoparticles of size in the range 1.5–3.3 nm were formed on the surface of titania nanospheres. Ru(0)/TiO₂ show high catalytic activity in hydrogen generation from the hydrolysis of ammonia borane with a turnover frequency value up to 241 min⁻¹ at 25.0 ± 0.1 °C. They provide unprecedented catalytic lifetime measured by total turnover number (TTO = 71,500) in hydrogen generation from the hydrolysis of ammonia borane at 25.0 ± 0.1 °C. The report also includes the results of kinetic study on the catalytic hydrolysis of ammonia borane depending on the temperature to determine the activation energy of the reaction (E_a = 70 ± 2 kJ/mol) and the catalyst concentration to establish the rate law of the reaction.     

CO2-promoted hydrolysis of KBH4 for efficient hydrogen co-generation

Hydrolysis of metal borohydrides in the presence of CO₂ has not been studied so far, although carbon dioxide contained in air is known to accelerate hydrogen generation. KBH₄ hydrolysis promoted by CO₂ gas put through an aqueous solution was studied by time-resolved ATR-FTIR spectroscopy, showing a transformation of BH₄⁻ into B₄O₅(OH)₄²⁻, and a drastically accelerated hydrogen production which can be completed within minutes. This process can be used to produce hydrogen on-board from exhaust gases (CO₂ and H₂O). We found a new intermediate, K₉[B₄O₅(OH)₄]₃(CO₃)(BH₄)·7H₂O, forming upon hydrolysis on air via a slow adsorption of the atmospheric CO₂. The same intermediate can be crystallized from partly hydrolyzed solutions of KBH₄ + CO₂, but not from the fully reacted sample saturated with CO₂. This phase was studied by single-crystal and powder X-ray diffraction, DSC, TGA, Raman, IR and elemental analysis, all data are fully consistent with the presence of the three different anions and of the crystallized water molecules. Its crystal structure is hexagonal, space group P-62c, with lattice parameters a = 11.2551(4), c = 17.1508(8) Å. Formation of the intermediate produces 16 mol of H₂ per mole of adsorbed CO₂ and thus is very efficient both gravimetrically and volumetrically. It allows also for an elimination of carbon dioxide from exhaust gases.     

Metal nanoparticle-embedded super porous poly(3-sulfopropyl methacrylate) cryogel for H2 production from chemical hydride hydrolysis

Poly(3-sulfopropyl methacrylate) (p(SPM)) cryogel was prepared under cryogenic conditions (T = −18 °C) and used as template for in situ metal nanoparticle preparation of Co, Ni and Cu. These metal nanoparticle-containing super macroporous cryogel composites were tested for H₂ production from hydrolysis of sodium borohydride (NaBH₄) and ammonia borane (AB). It was found that amongst p(SPM)-M (M: Co, Ni, and Cu) composite catalyst systems, the catalytic performances of Co- and Ni-containing p(SPM) cryogel composite catalyst systems were the same, however in hydrolysis of NH₃BH₃, the order of performance of the catalysts was Co > Ni > Cu. Interestingly, p(SPM)-Co cryogel composite demonstrated better catalytic performances in salt environments e.g., faster H₂ production rate in sea and tap water compared to DI water, and almost no effect of ionic strength of the solution medium was observed, but the salt types were found to affect the H₂ generation rate. Other parameters that affect H₂ production rate such as metal type, temperature, water source, salt concentration, amount of metal nanocatalyst and reusability were investigated. It was found that the hydrogen generation rate (HGR) was increased to 2836 ± 90 from 1000 ± 53 (ml H₂)(g of Co min)⁻¹ by multiple loading and reduction cycles of Co catalyst. Also, it was found that TOF values are highly temperature dependent, and increased to 15.1 ± 0.8 from 2.4 ± 0.1 (mol H₂)(mol catalyst min)⁻¹ by increasing the temperature from 30 to 70 °C. The activation energy, activation enthalpy and activation entropy were determined as 40.8 kJ (mol)⁻¹, 37.23 kJ (mol K)⁻¹, and −170.87 J (mol K)⁻¹, respectively, for the hydrolysis reaction of NaBH₄ with p(SPM)-Co catalyst system, and 25.03 kJ (mol)⁻¹, 22.41 kJ (mol K)⁻¹, and −182.8 J (mol K)⁻¹, respectively, for AB hydrolysis catalyzed by p(SPM)-Co composite system.     

Pd nanoparticles supported on MIL-101 as high-performance catalysts for catalytic hydrolysis of ammonia borane

Well dispersed ultrafine Pd NPs have been immobilized in the framework of MIL-101, and tested for the catalytic hydrolysis of ammonia borane. The powder XRD, N₂ adsorption–desorption, TEM, and ICP-AES were employed to characterize the Pd@MIL-101 catalyst. The as-synthesized Pd@MIL-101 exhibit the highest catalytic activity toward hydrolysis of AB among the Pd-based nano-catalysts ever reported, with the TOF value of 45 mol H₂ min⁻¹ (mol Pd)⁻¹.     

Mo-doped Ni-based catalyst for remarkably enhancing catalytic hydrogen evolution of hydrogen-storage materials

Ni-based alloys are considered as the efficient catalyst for hydrogen-storage materials decomposition. Herein, we applied an in-situ melt-quenching method to dope Mo in Ni-based alloy for catalytic hydrogen evolution from hydrogen-storage materials. Importantly, Mo doped Ni-based catalyst exhibits more than 6 times higher TOF value than that of pure Ni both in AB hydrolysis and hydrazine decomposition, because Mo acts as an electron donor to improve the reducibility of Ni. Hydrogen evolution kinetics were studied over a range of temperatures (303–353 K) and initial feed concentrations (catalyst/hydrogen-storage materials (wt/wt) ratios = 0.2–10). Under optimal reaction conditions, the H₂ evolution rate reaches 1.92 mol H₂/(mol_cat min) and 0.05 mol H₂/(mol_cat min) in the hydrolysis of ammonia borane and decomposition of hydrazine, which are 6.42 and 6.44 times higher than undoped Ni catalyst, respectively. And the apparent activation energy of ammonia borane hydrolysis and hydrazine decomposition were evaluated to be 26.66 ± 3.31 kJ/mol and 40.01 ± 3.38 kJ/mol, respectively.