Surface and Biological Activity of Some Prepared Iminium Surfactants Based on Schiff Bases

A series of novel iminium surfactants were prepared through quaternization of different prepared fatty Schiff bases with benzyl chloride. The chemical structures were confirmed using FTIR, ¹H-NMR and mass spectroscopy. The surface properties and biological activity of these surfactants were investigated. The surface parameters including critical micelle concentration (CMC), maximum surface excess (Γ_max) and minimum surface area (A _min), Efficiency (PC₂₀) and Effectiveness (π_CMC) as well as the free energy of micellization ( $ \Updelta G_{\text{mic}}^{\text{o}} $ ) and adsorption ( $ \Updelta G_{\text{ads}}^{\text{o}} $ ) were calculated. It was found that the prepared compounds have good surface and biological activity.     

Surface Parameters and Biological Activity of <Emphasis Type="Italic">N</Emphasis>-(3-(Dimethyl Benzyl Ammonio) Propyl) Alkanamide Chloride Cationic Surfactants

Three cationic surfactants containing amide groups were prepared by quaternization of dimethylaminopropylamine with benzyl chloride. FTIR and ¹H-NMR spectroscopy were used to confirm the chemical structure of the prepared cationic surfactants. The surface parameters were estimated using surface tension measurements at three different temperatures. The prepared cationic surfactant showed a lower CMC than conventional cationic surfactants. Thermodynamic parameters of adsorption and micellization depend mainly of alkyl chain length and temperature. The adsorption process is more favorable than micellization. The biological activity of the three surfactants was estimated using inhibition zone showing that amidoamine cationic surfactants have good activity and the surfactants C12Bn is the most effective one.     

Synthesis,Characterization, Surface and Biological Activity of Diquaternary Cationic Surfactants Containing Ester Linkage

Two series of diquaternary cationic surfactants designated as E9Nm and E11Nm having two different alkyl chains in their chemical structure were synthesized. The chemical structures of these surfactants were confirmed using elemental analysis, FTIR and ¹H‐NMR spectra. The surface activities of the different surfactants were determined using surface and interfacial tension at 25 °C. The surface parameters including: critical micelle concentration, effectiveness, efficiency, maximum surface excess and minimum surface area were determined. The surface activities of the cationic surfactants were correlated with their chemical structure. The surface activities of the surfactants increased with increasing the hydrophobic chain length. The adsorption and micellization tendencies of the surfactants in solution were determined using the free energies of adsorption and micellization. The synthesized surfactants were evaluated as biocides against bacteria and fungi. Biocidal activity data showed that a gradual increase in the hydrophobic chain length of the surfactant molecules gradually increases the efficiency of these surfactants as biocides.     

Syntheses and Characterization of Some Cationic Surfactants

A series of novel cationic surfactants were synthesized from the quaternization of triethyl amine and various long chain alkyl halide. The chemical structure of the prepared compounds was confirmed using elemental analysis, FTIR and ¹H-NMR spectra. The physical properties of the synthesized surfactants including, electrical conductivity, critical micelle concentration, (CMC) and the degree of ionization of the micelle, (β) were studied. The thermodynamic parameters of micelle formation, standard free energy ΔG _m°, enthalpy ΔH _m°, and entropy ΔS _m° were calculated. The results of the surface parameter determination were correlated with their chemical structures. It was found that the hydrocarbon chain length is the main factor which has an effect on the value of the thermodynamic parameters.

Synthesis and Properties of New Cleavable Cationic Surfactants Containing Carbonate Groups

A novel series of cleavable alkyltrimethylammonium surfactants with different hydrocarbon chain lengths (C8–16) were synthesized. A carbonate break site inserted between the polar head and the hydrocarbon chain makes these compounds hydrolyzable. The reagents used are renewable, (bio)degradable, or reusable. The hydrolysis of these cleavable surfactants will lead to the generation of fatty alcohols and choline, which is an essential biological nutrient. The surface activities in aqueous solution of the synthesized carbonates fulfill the requirement of being good surfactants. In addition, the cleavable compounds containing n-decyl and n-dodecyl chains showed similar or higher antimicrobial activities when compared to a non-cleavable analog.     

Synthesis,surface, thermodynamic properties and Biological activity of dimethylaminopropylamine surfactants

The chemical structure of the prepared cationic surfactants which formed through condensation reaction between dimethylaminopropylamine (DMAPA) and butyraldehyde then quaternized by three fatty alkyl bromide was confirmed by FTIR, ¹HNMR and mass spectroscopy. The chemical structure of prepared compounds has an effect on surface properties. By increasing the hydrophobic chain length, the values of CMC and Г_max decrease while A_min value was increased. The Thermodynamic parameters showed that adsorption and micellization processes are spontaneous. It is clear that the prepared cationic surfactants tend to adsorb at surface, then it aggregate to form micelle. The prepared surfactants showed good biological activity against Gram-positive and negative bacteria and fungi. The prepared cationic surfactant showed aggressive effect on the sulfate reducing bacteria growth.     

Surface and Biological Activity of Some Novel Cationic Surfactants

In this study, steps were taken toward the development of bactericidal and fungicidal synthetic cationic surfactants by reacting decyl, dodecyl or tetradecyl amine with acetic or hydrochloric acid to produce a series of amine salts which consequently converted to copper or cobalt cationic complexes via complexing the first series compounds with copper (II) or cobalt (II) ions. Surface properties such as interfacial tension and emulsifying power of these surfactants were investigated. The surface parameters including critical micelle concentration (CMC), maximum surface excess (Γ_max) and minimum surface area (A _min) were studied. Free energy of micellization (ΔG°_mic) and adsorption (ΔG°_ads) were calculated. The antimicrobial activity was determined via the inhibition zone diameter of the prepared compounds, which measured against five strains of a representative group of microorganisms. FTIR spectra, elemental analysis and H¹ NMR spectrum were performed to confirm compound structure and purity.

Mixed Stability and Antimicrobial Properties of Gluconamide-Type Cationic Surfactants

The stability of anionic-cationic surfactant solutions and the antimicrobial properties of novel N,N-dimethyl-N-[3-(gluconamide/lactobionamide)]propyl-N-alkylammonium bromides (CnDGPB and CnDLPB), N-methyl-N-hydroxyethyl group-N-[3-(gluconamide)-propyl]-N-alkylammonium bromide (CnMHGPB) and star-shaped gluconamide-type cationic surfactants N-dodecyl-N,N-bis[(3-d-gluconylamido)propyl]-N-alkylammonium bromide (CnDBGB) were investigated. Mixed stability in combination with sodium n-alkylbenzenesulfonate (LAS) was determined via transmittance; stability is achieved when percent transmittance was greater than 90 %. Transmittance results suggest that these cationic surfactants can form stable solutions with anionic surfactants over a broad concentration range. The inhibition activity of C _n DBGB is the best among the three kinds of glucocationic surfactants. Antimicrobial activity of C₁₂ surfactants was the best, C₁₄ was the second and C₁₀ was the worst. Moreover, antibacterial activity of glucose-based cationic surfactants was greater than lactose-based cationic surfactants.     

Aggregation and Adsorption Behavior of Cationic Surfactants (Cetyltrimethylammonium Bromide and Dodecyltrimethylammonium Bromide) in Aqueous Solutions of Antibiotic Drug (Amikacin Sulphate) at Different Temperatures

Conductivity and spectroscopy techniques have been accomplished to comprehend the mechanism of supramolecular assembly of cetyltrimethylammonium bromide (CTAB) and dodecyltrimethylammonium bromide (DTAB) in aqueous solution of amikacin sulphate (0.001, 0.005, and 0.010 mol kg⁻¹). For CTAB, the normal boost of the CMC value with rise in temperature manifests the significant role of aquaphilic dehydration. However, the aquaphobic dehydrations become prominent with temperature and depict typical U-shaped behavior of CMC for DTAB. The thermodynamic parameters of micellization have been derived from CMC values. The outcomes have been conferred in terms of solvation of hydrophobic part of surfactants by hydrophobic part of amikacin sulphate and micellization becomes more favorable for surfactant with more hydrophobic character in the presence of drug. The alteration in micro-environment of the ternary (drug/surfactant/water) system has been explained in terms of fluorescence emission intensity of surfactant solutions which has been found to decrease by the addition of drug. The obtained absorbance spectrum by varying concentrations of surfactant/drug affords noteworthy information regarding the diverse interactions in studied systems. Moreover, the exhaustive understanding of surfactant micellar behavior have been discussed in consideration of use of surfactants as drug delivery agents and hence to amplify drug bioavailability consequently remodeling its treatment efficacy.     

Biological Behaviors of Guanidine-Based Cationic Surfactants

The biological properties of novel guanidine‐based cationic surfactant including mono‐alkylguanidine (CnG), N,N,N′‐dimethyl alkylguanidine (CnMG), dicephalic guanidine surfactant (CnGQ), heterogemini guanidine surfactant (diCnGQ) were investigated. Antimicrobial activity was determined via the inhibition of cell viability of the prepared compounds, which was measured against three strains of a representative group of microorganisms. The inhibitions of cell viability were basically about 90 % at the concentration of 25 mg L^?1 to alkyl guanidium salts (CnG, CnMG), and higher than 95 % at a concentration of 10 mg L^?1 to dicephalic guanidine surfactants (CnGQ) and heterogemini guanidine surfactants (diCnGQ). The interactions of bovine serum albumin (BSA) with guanidine surfactants were investigated by fluorescence technology and the effect on BSA conformation follow the order: diC12GQ > C12GQ > C12G > C12MG. At any particular concentration, the biological activity depends on the alkyl chain length to any series of guanidine‐based cationic surfactants.     

The Effects of Amide Bonds and Aromatic Rings on the Surface Properties and Antimicrobial Activity of Cationic Surfactants

The cationic surfactants containing aromatic rings and amide bonds, N,N-dimethyl-N-dodecyl-2-pyrimidinylcarbamoylmethyl ammonium chloride ( a ), N,N-dimethyl-N-dodecyl-2-thiazolylcarbamoylmethyl ammonium chloride ( b ), and N,N-dimethyl-N-dodecyl-phenylcarbamoylmethyl ammonium chloride ( c ), were synthesized and characterized. The surface tension and conductivity values were employed to investigate the absorption and micellization behavior of the three cationic surfactants. The results showed that the synthesized surfactants have shown a low critical micelle concentration (CMC) and a high adsorption efficiency (pC₂₀) compared with the traditional cationic surfactant of N,N-dimethyl-N-dodecyl-N-benzyl ammonium chloride ( BAC-12 ). The aromatic rings of the a , b , and c molecular structures were analyzed using the ¹H NMR spectra for electrostatic repulsion effects between hydrophilic headgroups. The size distribution of the micelles was derived using dynamic light scattering (DLS) techniques. In addition, the foaming ability of a , b , c , and BAC-12 was investigated and the antimicrobial activity of a , b , c , and BAC-12 against Escherichia coli, Staphylococcus aureus, and Bacillus subtilis was examined. The effects of amide bonds and aromatic rings on the surface properties and antimicrobial activity of a , b , and c were analyzed and compared with BAC-12 of the same alkyl chain length. The synthesized surfactants exhibited a high surface ability and better antibacterial activity compared with BAC-12 .     

Aggregation and Thermodynamic Properties of Some Cationic Gemini Surfactants

In this study, the gemini surfactants of the alkanediyl-α-ω-bis(alkyl dimethyl ammonium) dibromide type, on the one hand, with different alkyl groups containing m carbon atoms and an ethanediyl spacer, referred to as “m-2-m” (m = 10, 12 and 16) and, on the other hand, with n-C₁₆ alkyl groups and different spacers containing s carbon atoms, referred to as “16-s-16” (s = 2, 6, 10 and Ar (8)) have been synthesized, purified and characterized. The critical micelle concentration (CMC), micelle ionization degree (α) and Gibbs free energy of micellization (∆G _mic) of these surfactants and the monomeric cationic surfactants DTAB and CTAB have been determined by means of electric conductivity measurements. In addition, the temperature dependence of the CMC was determined for the 10-2-10 gemini surfactant. The CMCs of the gemini surfactants are found to be much lower than those of the corresponding monomeric surfactants and the effect of the hydrophobic alkyl chain length is more important than that of the spacer. The CMC of 16-s-16 passes through a maximum of (or around) s = 6 and then decreases for s = 10. The presence of a maximum CMC is explained by the contribution of a change of conformation of the surfactant with increasing spacer chain length. The changes of α with s and m are found qualitatively similar to those found for CMC values. The values of ∆G _mic are more negative for the dimers than for the monomers and also change with an increasing spacer carbon number, as CMC values do. The thermodynamic parameters of micellization indicate that the micellization of 10-2-10 is enthalpy driven.     

Gemini Cationic Surfactants: Synthesis and Influence of Chemical Structure on the Surface Activity

Three cationic gemini surfactants were synthesized and characterized using different methods. Their surface activities were measured using surface and interfacial tension measurements. The effect of the spacer chain length on the surface activity, emulsification power and interfacial tension was studied. The thermodynamic parameters showed the tendency towards micellization and adsorption. The results showed that longer spacers increased the micellization tendencies of the surfactants, while shorter spacers increased the adsorption tendency at the air–water interface.     

Surface Properties of an Alcohol Alkoxylate in the Presence of a Cationic Surfactant

Alcohol alkoxylate was prepared via propoxylation of an industrial alcohol ethoxylate. The chemical structure of the prepared compound was confirmed using FT-IR and the physical properties were evaluated by the usual methods according to ASTM. The surface properties of the aqueous solution of alcohol alkoxylate were determined with or without addition of a cationic surfactant in comparison to the corresponding alcohol ethoxylate. The measured parameters were surface tension, CMC, maximum surface excess, minimum surface area and the interaction parameter (β). These data indicate that surface properties changed due to the attractive complex formation in the mixed system.     

Synthesis,Surface and Antimicrobial Activities of Novel Cationic Gemini Surfactants

A series of novel cationic gemini surfactants [C_nH_2n+1–O–CH₂–CH(OH)–CH₂–N⁺(CH₃)₂–(CH₂)₂]₂·2Br^? [ 3a (n = 12), 3b (n = 14) and 3c (n = 16)] having a 2‐hydroxy‐1,3‐oxypropylene group [?CH₂–CH(OH)–CH₂–O–] in the hydrophobic chain have been synthesized and characterized. Their water solubility, surface activity, foaming properties, and antibacterial activity have been examined. The critical micelle concentration (CMC) values of the novel cationic gemini surfactants are one to two orders of magnitude smaller than those of the corresponding monomeric surfactants. Furthermore, the novel cationic gemini surfactants have better water solubility and surface activity than the comparable [C_nH_2n+1–N⁺(CH₃)₂–(CH₂)₂]₂·2Br^? (n‐4‐n) geminis. The novel cationic gemini surfactants 3a and 3b also exhibit good foaming properties and show good antibacterial and antifungal activities.     

Characterization,surface properties and biological activity of new prepared cationic surfactants

Three cationic surfactants were prepared. A condensation reaction between dimethylaminopropylamine (DMAPA) and benzaldehyde was performed. The produced Schiff base was quaternization with three fatty alkyl bromide with different carbon chain length separately to form the desired cationic surfactants. The chemical structure of synthesized cationic surfactants was confirmed by FTIR, ¹H NMR and mass spectroscopy. It was found that the chemical structure of prepared compounds has an effect on surface properties, where increasing the hydrophobic chain length decrease the values of CMC, Г_max while A_min value was increased. The thermodynamic parameters showed that adsorption and micellization processes are spontaneous. It is clear that the prepared cationic surfactants at first tend to adsorb at surface, then it aggregate to form micelle. The prepared surfactants showed good biological activity against gram positive and negative bacteria and fungi in the following order of II (C12) > I (C10) > III (C16). The serial dilution method was used to evaluate the inhibiting effect of these compounds on the sulfate reducing bacteria growth.     

Mono‐, Di‐ and Tetra‐Cationic Surfactants as Carbon Steel Corrosion Inhibitors

Corrosion inhibition of three new synthesized cationic surfactants, N‐(2‐(((Z)‐4‐(pyridin‐4‐yl)but‐3‐en‐1‐yl)amino)ethyl)‐N‐(2‐((E)‐(pyridin‐4‐ylmethylene)amino)ethyl)dodecan‐1‐aminium bromide I(4N), N¹,N²‐didodecyl‐N¹‐((Z)‐4‐(pyridin‐4‐yl)but‐3‐en‐1‐yl)‐N²‐(2‐((E)‐(pyridin‐4‐ylmethylene)amino)ethyl)ethane‐1,2‐diaminium bromide II(4N) and 1‐dodecyl‐4‐((E)‐((2‐(dodecyl(2‐(dodecyl((Z)‐4‐(1‐dodecylpyridin‐1‐ium‐4‐yl)but‐3‐en‐1‐yl)ammonio)ethyl)ammonio)ethyl)imino)methyl)pyridin‐1‐ium bromide IV(4N) on carbon steel was investigated by weight loss, electrochemical impedance spectroscopy and polarization measurements. Results show that the synthesized cationic surfactants inhibit corrosion of carbon steel in 1 M HCl. The inhibitive action occurs by virtue of adsorption on the metal surface following a Langmuir adsorption isotherm model. Polarization curves reveal that the investigated cationic surfactants can be classified as mixed inhibitor types. The variations in the corrosion inhibition efficiency between three cationic surfactants are correlated with their chemical structures, with more hydrophobic surfactants yielding higher inhibition efficiency.     

Retracted: Synthesis,Characterization, and Surface Activities of Polymeric Cationic Thiol Surfactants in Aqueous Medium

A series of cationic polyurethane surfactants [PQ_8-18] were synthesized by the reaction of alkyl bromoacetate (namely: octyl-, decyl-, dodecyl-, tetradecyl-, hexadecyl-, and octadecyl bromoacetate) as quaternizing agents and modified polyurethane contains tertiary amine species. Modified polyurethane was prepared by the reaction of toluene diisocyanate (TDI) and triethanol amine monomercaptoacetate. The chemical structures of the prepared surfactants were confirmed using elemental analysis, Fourier transform infrared spectroscopy (FTIR), and Proton nuclear magnetic resonance (¹H NMR) spectroscopy. The molecular weight measurements of the prepared polymers showed that the segments of each polymer contain average 10 units of the urethane-triethanol amine mercaptoacetate. The surface activities of the prepared surfactants including: surface tension (γ), effectiveness ( π_cmc), concentration at micelle formation (CMC), efficiency (Pc₂₀), maximum concentration at the interface (Γ_max), and the average area occupied by each surfactant molecule at the interface at equilibrium ( A _min) of surfactants solutions were established at 25°C. The surface tension and the critical micelle concentration values of the prepared surfactants were gradually decreased by the gradual increase of their alkyl chain length. The prepared cationic surfactants showed efficient activity as inhibitors for dissolution of carbon steel in an acidic medium and also as a biocide against the growth of bacteria, fungi, and yeast.     

Synthesis and Properties of Dicephalic Cationic Surfactants Containing a Quaternary Ammonium and a Guanidine Group

Novel dicephalic surfactants containing a quaternary ammonium and a guanidine group were synthesized, and the effect of the alkyl chain length on micellization and antimicrobial activity were investigated. Surface tension and conductivity were applied to study the self-aggregation of the amphiphilic molecule in aqueous solution. The results indicated that these compounds reduce the surface tension to a level of 30–36 mN/m at the air/water interface and that there is a characteristic chain length dependence of the micellization process of surfactants. The antimicrobial activity was evaluated against Gram-negative, Gram-positive bacteria and fungi, indicating strong antibacterial activity against tested strains.     

Preparation of a Novel Class of Cationic Gemini Imidazolium Surfactants Containing Amide Groups as the Spacer: Their Surface Properties and Antimicrobial Activity

A class of novel cationic Gemini imidazolium surfactants containing amide groups as the spacer were synthesized from ethylenediamine and 1-bromoalkane(C₈, C₁₀, C₁₂, C₁₄, C₁₆) by N-alkylation to get N,N′-dialkyl ethylenediamine (1a–e), 1a–e was further reacted with chloroacetyl chloride by N-acylation to get N,N′-(ethane-1,2-diyl)bis(2-chloro-N-alkylacetamide) (2a–e), which was further reacted respectively with 1-methyl imidazole by quaternized to form the surfactant molecule, N,N′-((ethane-1,2-diyl)bis(alkyl-azanediyl)bis(2-oxoethane-2,1-diyl)) bis(1-methyl-1H-imidazol-3-ium) dichloride. The structures of intermediates (1a–e) and (2a–e) were characterized by IR and ¹H NMR. The structures of the surfactants (3a–e) were characterized by IR, ¹H-NMR and ¹³C-NMR and element analysis. The critical micelle concentrations (CMC) of 3a–e were determined by the conductivity method at 25 °C. The CMC values decreased with increasing the length of the hydrophobic chain. The surfactants (3a–e) showed good foaming stability, emulsion ability and wetting ability. The surfactants (3a–e) also have good antimicrobial activity against Staphylococcus aureus, Escherichia coli and Bacillus subtilis.