Metamorphic In0.4Al0.6As/In0.4Ga0.6As HEMTs on GaAs substrate

New In_0.4Al_0.6As/In_0.4Ga_0.6 As metamorphic (MM) high electron mobility transistors (HEMTs) have been successfully fabricated on GaAs substrate with T-shaped gate lengths varying from 0.1 to 0.25 μm. The Schottky characteristics are a forward turn-on voltage of 0.7 V and a gate breakdown voltage of -10.5 V. These new MM-HEMTs exhibit typical drain currents of 600 mA/mm and extrinsic transconductance superior to 720 mS/mm. An extrinsic current cutoff frequency f_T of 195 GHz is achieved with the 0.1-μm gate length device. These results are the first reported for In_0.4 Al_0.6As/In_0.4Ga_0.6As MM-HEMTs on GaAs substrate     

Millimeter-wave ion-implanted gradedInxGa1-xAs MESFETs grown by MOCVD

The authors present the fabrication and characterization of ion-implanted graded In_xGa_1-xAs/GaAs MESFETs. The In_xGa_1-xAs layers are grown on GaAs substrates by MOCVD (metal-organic chemical vapor deposition) with InAs concentration graded from 15% at the substrate to 0% at the surface. 0.5-μm gate MESFETs are fabricated on these wafers using silicon ion implantation. In addition to improved Schottky contact, the graded In_xGa _1-xAs MESFET achieves maximum extrinsic transconductance of 460 mS/mm and a current-gain cutoff frequency f_t of 61 GHz, which is the highest ever reported for a 0.5-μm gate MESFET. In comparison, In_0.1Ga_0.9As MESFETs fabricated with the same processing technique show an f_t of 55 GHz     

Ga0.51In0.49P/In0.15Ga0.85As/GaAs pseudomorphic doped-channel FET with high-current densityand high-breakdown voltage

Ga_0.51In_0.49P/In_0.15Ga_0.85 As/GaAs pseudomorphic doped-channel FETs exhibiting excellent DC and microwave characteristics were successfully fabricated. A high peak transconductance of 350 mS/mm, a high gate-drain breakdown voltage of 31 V and a high maximum current density (575 mA/mm) were achieved. These results demonstrate that high transconductance and high breakdown voltage could be attained by using In_0.15Ga_0.85As and Ga_0.51In_0.49P as the channel and insulator materials, respectively. We also measured a high-current gain cut-off frequency f_t of 23.3 GHz and a high maximum oscillation frequency f_max of 50.8 GHz for a 1-μm gate length device at 300 K. RF values where higher than those of other works of InGaAs channel pseudomorphic doped-channel FETs (DCFETs), high electron mobility transistors (HEMTs), and heterostructure FETs (HFETs) with the same gate length and were mainly attributed to higher transconductance due to higher mobility, while the DC values were comparable with the other works. The above results suggested that Ga_0.51In_0.49P/In_0.15Ga_0.85 As/GaAs doped channel FET's were were very suitable for microwave high power device application     

0.2-μm gate-length atomic-planar doped pseudomorphic Al0.3Ga0.7As/In0.25Ga0.75As MODFETswith fT over 120 GHz

The authors report the DC and RF performance of nominally 0.2-μm-gate length atomic-planar doped pseudomorphic Al_0.3Ga_0.7As/In_0.25Ga_0.75As modulation-doped field-effect transistors (MODFETs) with f_T over 120 GHz. The devices exhibit a maximum two-dimensional electron gas (2 DEG) sheet density of 2.4×10¹² cm^-2, peak transconductance g _m of 530-570 mS/mm. maximum current density of 500-550 mA/mm, and peak current-gain cutoff frequency f_T of 110-122 GHz. These results are claimed to be among the best ever reported for pseudomorphic AlGaAs/InGaAs MODFETs and are attributed to the high 2 DEG sheet density, rather than an enhanced saturation velocity, in the In_0.25Ga_0.75As channel     

Unstrained, modulation-doped, In0.3Ga0.7As/In0.29Al0.71As field-effect transistor grown on GaAssubstrate

The fabrication, structure, and properties of unstrained modulation-doped, 1-μm-long and 10-μm-wide gate, field effect transistors made of In_0.3Ga_0.7As/In_0.29As_0.71As heterojunctions grown on GaAs substrates using compositionally step-graded buffer layers are described. These devices have a transconductance of 335 mS/mm, f_max of 56 GHz, and a gate breakdown voltage of 23.5 V     

In0.52Al0.48As/InAs/InxAl1-xAs pseudomorphic HEMT's on InP

The DC and microwave performance of an InAs channel HEMT is reported. Room-temperature electron mobility as high as 20200 cm² /Vs is measured, with a high carrier concentration of 2.7×10 ¹² cm^-2. DC extrinsic transconductance of 714 mS/mm is measured and a unity-current-gain cut-off frequency of 50 GHz is obtained for a 1.1-μm gate length HEMT. The success of achieving superior Hall mobility and device performance is strongly dependent on the In_xAl_1-xAs buffer layer design that changes the lattice constant from lattice-matched In_0.52Al_0.48 As to In_0.75Al_0.25As. The multiple In_0.52Al_0.48As/InAs monolayer superlattices buffer achieves the best performance as compared to the step-graded In_x Al_1-xAs and the uniform In_0.76Al_0.25 As buffer     

0.12 μm transferred-substrateIn0.52Al0.48As/In0.53Ga0.47As HEMTs on silicon wafer

New In_0.52Al_0.48As/In_0.53Ga_0.47 As transferred-substrate high electron mobility transistors (TS-HEMTs) have been successfully fabricated on 2-in Silicon substrate with 0.12 μm T-shaped gate length. These new TS-HEMTs exhibit typical drain currents of 450 mA/mm and extrinsic transconductance up to 770 mS/mm. An extrinsic current gain cutoff frequency f_T of 185 GHz is obtained. That result is the first reported for In_0.52Al_0.48As/In_0.53Ga_0.47 As TS-HEMTs on Silicon substrate     

Single- and double-heterojunction pseudomorphic In0.5(Al0.3Ga0.7)0.5P/In0.2Ga0.8As high electron mobility transistors grown by gas sourcemolecular beam epitaxy

In_0.5(Al_0.3Ga_0.7)_0.5 P/In_0.2Ga_0.8As single- and double-heterojunction pseudomorphic high electron mobility transistors (SH-PHEMTs and DH-PHEMTs) on GaAs grown by gas-source molecular beam epitaxy (GSMBE) were demonstrated for the first time. SH-PHEMTs with a 1-μm gate-length showed a peak extrinsic transconductance g_m of 293 mS/mm and a full channel current density I_max of 350 mA/mm. The corresponding values of g_m and I_max were 320 mS/mm and 550 mA/mm, respectively, for the DH-PHEMTs. A short-circuit current gain (H₂₁) cutoff frequency f_T of 21 GHz and a maximum oscillation frequency f_max of 64 GHz were obtained from a 1 μm DH device. The improved device performance is attributed to the large ΔE_c provided by the In_0.5(Al_0.3Ga_0.7)_0.5P/In _0.2Ga_0.8As heterojunctions. These results demonstrated that In_0.5(Al_0.3Ga_0.7)_0.5P/In _0.2Ga_0.8As PHEMT's are promising candidates for microwave power applications     

InP-based enhancement-mode pseudomorphic HEMT with strainedIn0.45Al0.55As barrier andIn0.75Ga0.25As channel layers

Using strained aluminum-rich In_0.45Al_0.55As as Schottky contact materials to enhance the barrier height and indium-rich In_0.75Ga_0.25As as channel material to enhance the channel performance, we have developed InP-based enhancement-mode pseudomorphic InAlAs/InGaAs high electron mobility transistors (E-PHEMT's) with threshold voltage of about 170 mv. A maximum extrinsic transconductance of 675 mS/mm and output conductance of 15 mS/mm are measured respectively at room temperature for 1 μm-gate-length devices, with an associated maximum drain current density of 420 mA/mm at gate voltage of 0.9 V. The devices also show excellent rf performance with cutoff frequency of 55 GHz and maximum oscillation frequency of 62 GHz. To the best of the authors' knowledge, this is the first time that InP-based E-PHEMT's with strained InAlAs barrier layer have been demonstrated     

Characteristics of strained In0.65Ga0.35As/In0.52Al0.48As HEMT withoptimized transport parameters

The DC and microwave performance of a strained In₀.₆₅Ga₀.₃₅As/In₀ .₅₂A1₀.₄₈As HEMT (high-electron-mobility transistors) is reported. Its design is based on theoretical and experimental studies including low- and high-field transport characterization of heterostructures with different strains. The intrinsic DC transconductance and cutoff frequence of 1.4-μm-long gate HEMTs are 574 mS/mm and 38.6 GHz, respectively. The increased indium (In) composition in the channel enhances the drift velocity from 1.35×10⁷ to 1.55×10⁷ cm/s at 300 K     

InAlAs/InGaAs metamorphic HEMT with high current density and highbreakdown voltage

An In_0.3Al_0.7As/In_0.3Ga_0.7 As metamorphic power high electron mobility transistor (HEMT) grown on GaAs has been developed. This structure with 30% indium content presents several advantages over P-HEMT on GaAs and LM-HEMT on InP. A 0.15-μm gate length device with a single δ doping exhibits a state-of-the-art current gain cut-off frequency F_t value of 125 GHz at V_ds=1.5 V, an extrinsic transconductance of 650 mS/mm and a current density of 750 mA/mm associated to a high breakdown voltage of -13 V, power measurements performed at 60 GHz demonstrate a maximum output power of 240 mW/mm with 6.4-dB power gain and a power added efficiency (PAE) of 25%. These are the first power results ever reported for any metamorphic HEMT     

High performance 0.35 μm gate-length monolithicenhancement/depletion-mode metamorphicIn0.52Al0.48As/In0.53Ga0.47As HEMTs on GaAs substrates

Monolithic integration of enhancement (E)- and depletion (D)-mode metamorphic In_0.52Al_0.48As/In_0.53Ga_0.47 As/GaAs HEMTs with 0.35 μm gate-length is presented for the first time. Epilayers are grown on 3-inch SI GaAs substrates using molecular beam epitaxy. A mobility of 9550 cm²/V-s and a sheet density of 1.12×10^{12 -2} are achieved at room temperature. Buried Pt-gate was employed for E-mode devices to achieve a positive shift in the threshold voltage. Excellent characteristics are achieved with threshold voltage, maximum drain current, and extrinsic transconductance of 100 mV, 370 mA/mm and 660 mS/mm, respectively for E-mode devices, and -550 mV, 390 mA/mm and 510 mS/mm, respectively for D-mode devices. The unity current gain cutoff frequencies of 75 GHz for E-mode and 80 GHz for D-mode are reported     

Ga2O3(Gd2O3)/InGaAsenhancement-mode n-channel MOSFETs

We have demonstrated the first Ga₂O₃(Gd₂O₃) insulated gate n-channel enhancement-mode In_0.53Ga_0.47As MOSFET's on InP semi-insulating substrate. Ga₂O₃(Gd₂ O₃) was electron beam deposited from a high purity single crystal Ga₅Gd₃O₁₂ source. The source and drain regions of the device were selectively implanted with Si to produce low resistance ohmic contacts. A 0.75-μm gate length device exhibits an extrinsic transconductance of 190 mS/mm, which is an order of magnitude improvement over previously reported enhancement-mode InGaAs MISFETs. The current gain cutoff frequency, f_t, and the maximum frequency of oscillation, f_max, of 7 and 10 GHz were obtained, respectively, for a 0.75×100 μm² gate dimension device at a gate voltage of 3 V and drain voltage of 2 V     

Integration of InAlGaAs/InGaAs MODFETs on MQW modulators on GaAssubstrates

An In_xAl_yGa_1-x-y device layer structure that enables the monolithic integration of In_0.25Al _0.75As/In_0.15Ga_0.85As MODFETs and In _0.25Al_0.35Ga_0.40As/In_0.25Ga _0.75As MQW modulators is reported. Current gain cutoff frequencies of 10 GHz are measured for 1 μm gate length MODFETs. MQW modulators operating at 1.05 μm demonstrate 20% transmission modulation for an applied 8 V     

Gate-length dependence of DC and microwave properties ofsubmicrometer In0.53Ga0.47As HIGFETs

In_0.52Al_0.48As/In_0.53Ga_0.47 As/InP heterostructure insulated-gate field-effect transistors (HIGFETs) with gate lengths from 1.1 and 0.3 μm have been fabricated, and their electrical performance is characterized at DC and microwave frequencies. The refractory-gate self-aligned process, applied to devices with In_0.53Ga_0.47As channels, yields an unprecedented combination of very-high speed and excellent uniformity. HIGFETs with L_g=0.6 μm showed average peak transconductance g_m of 528 mS/mm and unity-current-gain cutoff frequency f_t of 50 GHz. The uniformity of g_m was better than 1%, and the voltage of the g_m peak was uniform to ±30 mV. HIGFETs with L_g=0.3 μm showed f₁ up to 63 GHz, but suffered from serious short-channel effect, due to excessive thickness of the InGaAs channel layer. A self-aligned technique for gate resistance reduction is shown to substantially improve microwave power gain     

DC and microwave characteristics of InAlAs/InGaAssingle-quantum-well MODFETs with GaAs gate barriers

The design and performance of In_0.53Ga_0.47As/In_0.52Al_0.48 As modulation-doped field-effect transistors (MODFETs) have been optimized by incorporating a single In_0.53Ga_0.47As quantum-well channel and a thin strained GaAs gate barrier layer. These help to lower the output conductance and gate leakage current of the device, respectively. The DC performance of 1-μm-gate devices is characterized by extrinsic transconductances of 320 mS/mm at 300 K and 450 mS/mm at 77 K and a best value of f_T=35 GHz is derived from S-parameter measurements     

Fabrication of 0.15-μm Γ-Shaped Gate In0.52Al0.48As/In0.6Ga0.4As Metamorphic HEMTs Using DUV Lithography and Tilt Dry-Etching Technique

An In_0.52Al_0.48As/In_0.6Ga_0.4 As metamorphic high-electron mobility transistor (MHEMT) with 0.15-mum Gamma-shaped gate using deep ultraviolet lithography and tilt dry-etching technique is demonstrated. The developed submicrometer gate technology is simple and of low cost as compared to the conventional E-beam lithography or other hybrid techniques. The gate length is controllable by adjusting the tilt angle during the dry-etching process. The fabricated 0.15-mum In_0.52Al_0.48As/In_0.6Ga_0.4As MHEMT using this novel technique shows a saturated drain-source current of 680 mA/mm and a transconductance of 728 mS/mm. The f_T and f_max of the MHEMT are 130 and 180 GHz, respectively. The developed technique is a promising low-cost alternative to the conventional submicrometer E-beam gate technology used for the fabrication for GaAs MHEMTs and monolithic microwave integrated circuits     

A Two-Step-Recess Process Based on Atomic-Layer Etching for High-Performance $hbox{In}_{0.52}hbox{Al}_{0.48}hbox{As}hbox{/}hbox{In}_{0.53} hbox{Ga}_{0.47}hbox{As}$ p-HEMTs

We investigated 60-nm In_0.52Al_0.48As/In_0.53Ga_0.47As pseudomorphic high-electron mobility transistors (p-HEMTs) fabricated by using a Ne-based atomic-layer-etching (ALET) technology. The ALET process produced a reproducible etch rate of 1.47 Aring/cycle for an InP etch stop layer, an excellent InP etch selectivity of 70 against an In_0.52Al_0.48As barrier layer, and an rms surface-roughness value of 1.37 Aring for the exposed In_0.52Al_0.48As barrier after removing the InP etch stop layer. The application of the ALET technology for the gate recess of 60-nm In_0.52Al_0.48As/In_0.53Ga_0.47As p-HEMTs produced improved device parameters, including transconductance (G_M), cutoff frequencies (f_T)> and electron saturation velocity (vsat) in the channel layer, which is mainly due to the high etch selectivity and low plasma-induced damage to the gate area. The 60-nm In_0.52Al_0.48As/In_0.53Ga_0.47As p-HEMTs fabricated by using the ALET technology exhibited G_M,_Max = 1-17 S/mm, f_T = 398 GHz, and v_sat = 2.5 X 10⁷ cm/s.     

DC and RF performance of LP-MOCVD grownAl0.25Ga0.75As/InxGa1-xAs(x=0.15-0.28) P-HEMT's with Si-delta doped GaAs layer

Si-delta-doped Al_0.25Ga_0.75As/In_xGa_1-xAs (x=0.15-0.28) P-HEMT's, prepared by LP-MOCVD, are investigated. The large conduction band discontinuity leads to 2-DEG density as high as 2.1×10¹²/cm² with an electron mobility of 7300 cm²/V·s at 300 K. The P-HEMT's with 0.7×60 μm gate have a maximum extrinsic transconductance of 380 mS/mm, and a maximum current density of 300 mA/mm. The S-parameter measurements indicate that the current gain and power gain cutoff frequencies are 30 and 61 GHz, respectively, The RF noise characteristics exhibit a minimum noise figure of 1.2 dB with an associated gain of 10 dB at 10 GHz. Due to the efficient doping technique, the electron mobility and transconductance obtained are among the best reported for MOCVD grown P-HEMT's with the similar structure     

In0.52Al0.48As/In0.53Ga0.47As MSM photodetectors and HEMT's grown by MOCVD on GaAs substrates

The authors report the first demonstration of In_0.52Al _0.48As/In_0.53Ga_0.47As metal-semiconductor-metal (MSM) photodetectors and high-electron-mobility transistors (HEMTs) grown on GaAs substrates by organometallic chemical vapor deposition. Both photodetectors and transistors showed no degradation in performance compared to devices simultaneously grown on InP substrates. The photodetectors exhibited a responsivity of 0.45 A/W and leakage current of 10 to 50 nA. The HEMTs with a gate length of 1.0 μm showed a transconductance as high as 250 mS/mm, and f_T and f_max of 25 and 70 GHz, respectively