共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
3.
在我国大力提倡节能减排的背景之下,工厂生产中如何降低能源消耗,减少成本支出成为工厂生产的重要指标。经过对工厂生产成本的分析可知,用电成本成为了工厂的重要支出,如何采用节能技术有效降低电能消耗,成为工厂降低能源消耗的重要手段。考虑到工厂电气技术发展的现状,我们应在工厂电气技术中积极应用节能技术,通过一系列的措施提升工厂电气技术水平,使工厂电气技术能够在满足工厂需要的前提下,最大程度的实现节能。从目前应用结果来看,节能技术在工厂电气技术中得到了很好的应用,并取得了积极的效果,对降低工厂电能消耗、提升工厂整体技术水平发挥了重要作用。 相似文献
4.
本文从分析技术监督活动的进程和效果及技术监督管理的内容和方式出发,提出了技术监督的指标体系。这是技术监督史上的创举,对促进技术监督的发展,进一步提高技术监督的水平具有重要意义。 相似文献
5.
孙兴芳 《国外电子测量技术》2006,25(12):5
2006年11月8日,北京中科泛华测控技术有限公司参加了“全球虚拟仪器技术盛会NIDays2006中国站”的活动,来自该公司产品开发部经理史永勤先生、销售部经理葛飚先生以及DAQ事业部经理赵晓宁先生在会上介绍了近10年来泛华测控在测控技术领域中取得的一些成绩以及未来的发展。 相似文献
6.
环境友好型技术对促进我国经济结构调整和经济增长方式转变具有重要的影响。环境技术发展中本身存在着路径依赖的问题,滞后的环境技术在相当程度上制约了我国环境产业和相关产业技术的提高以及经济发展的水平并影响到环境质量的改善。率先在环境友好型技术方面进行突破,实现技术跨越,可以提高资源节约型、环境友好型社会建设的技术支撑能力,对于实现经济、社会和环境的协调发展具有重要的意义。 相似文献
7.
在当前时代背景下,网络业务量变得越来越多。若在建设通信工程的时候,未能运用现代网络技术,自然很难保证实际效果。为此,相关人员就需要做好技术研究工作,通过合理应用,推动整个行业持续进步。本篇文章主要描述了5G移动通信和软交换技术的概念,并对于实际应用发表一些个人的观点和看法。 相似文献
8.
9.
10.
11.
提出了一种N2O-C2H2火焰原子吸收光谱法进行热电池DEB(去极剂、电解质、粘合剂的复合片)中钙含量测定的新方法。介绍钙最佳测定条件以及呈良好线性范围的浓度。同时对样品的测定条件和干扰因素进行了综合考虑。该方法具有很好的灵敏度、干扰小、重现性好,准确度、精确度均能满足热电池研制工作的要求。测定样品含钙量相对标准偏差均小于1.0%(测定次数n =10)。标准加入回收率均在97%~102%(n =6)范围。结果表明:运用N2O-C2H2火焰原子吸收光谱法进行热电池DEB中钙含量的测定,完全适用于热电池DEB中钙含量的控制分析。达到了实验室分析质量控制的要求。 相似文献
12.
根据规划在黄河北干流上布置万家寨、龙口、天桥、碛口、古贤、甘泽坡6座水利枢纽工程。北干梯级开发可有效控制和管理黄河的水沙关系、洪水;改善生态环境,使水资源得到合理利用;向华北电网提供大量电力,对秦晋2省工农业、通航和旅游等具有促进作用,并带动地方经济的发展。 相似文献
13.
铜、铝导体生产的发展趋向及有关问题的探讨 总被引:4,自引:0,他引:4
本文综合分析了我国铜、铝及它们的合金导体在品种、质量和生产装备方面的现状和国外在该领域的进展及发展趋向,并指出:我国铜、铝导体的年用量已名列世界前茅,但导体的品种少,工艺装备落后。其中铝连铸连轧生产线比铜的更落后,主要差距在计算机监控系统,由此也限制了品种的发展;废铜在导体上的应用,要提高质量关键在于所用废铜原材料的级别、熔炼炉及熔炼工艺;铜杆质量不能满足电缆工业发展的需要,修订电工用铜杆国标或制订行业标准,实行铜杆分等使用已是势在必行;我国电缆工业需要建立真正意义上的从金属材料、镀层、导体结构到绝缘材料特种的电缆厂;行业协会在组织行业内部带有共性问题的科技攻关,与产业界、行业间的协调和科技合作方面应起到更大的作用;应发挥综合优势,加强材料、工艺、产品与设备的联合攻关,实现科技与生产的创新。 相似文献
14.
采用空气-乙炔(AIR-C2H2)火焰原子吸收光谱法对热电池加热粉中钾K的含量进行测定。介绍了K的最佳测定条件。同时对样品的处理条件和测定中的干扰因素在综合分析的基础上提出了有效的测定方案。该测定方法灵敏度好,准确度与精确度均能满足热电池研制工作的要求。测定出的样品K含量相对标准偏差均小于1.0%(测定次数n=10)。标准加入回收率均在97%~102%(n=5)范围内。测定结果表明,运用AIR-C2H2火焰原子吸收光谱法进行热电池加热粉中K含量的测定,适用于热电池加热粉中K含量的控制。 相似文献
15.
16.
T. A. Rafalskaya 《Thermal Engineering》2017,64(4):313-317
The effect of deviations in heat network parameters on operation of heating system and hot-water supply systems in buildings is examined. The consequences of a decrease in the water temperature in a heat network under extreme weather conditions in a range below the design ambient air temperature, the efficiency of disconnection of a hot water supply system (HWSS) heater in this period, and deviations in the normal heat supply in the transition period at relatively high outdoor temperatures are considered. The specific and scope of failures depend on the design-heating load to design hot water supply load ratio for the heat network. A mathematical model was developed, and numerical investigation was performed of modern schemes of heat points which are designed primarily for covering the hot water supply load and recovering the heating system heat output in case of low or no hot water consumption in HWSS. The performed calculations demonstrate that the heating system has no time to restore its heat output, thereby considerably reducing air temperature in the heated premises. The lower the ambient air temperature and the lower the ratio of the design loads for hot water supply and heating, the greater is this decrease. At the same time, in case of a sudden decrease in the outdoor temperature and an accident in the heat supply system, the heating system must be the priority consumer, since a heating failure not only decreases the thermal comfort of consumers but can cause emergency situations in local utility systems, such as a cold water supply system. Correction of failures in a heat supply system requires calculation of operating conditions of heat networks. 相似文献
17.
18.
19.
20.
The statistical characteristics of amplitude and amplitude-phase spectra of PDs in the insulation of model specimens with
artificial flaws in a semiconducting coating are investigated. The algorithm for distinguishing the flaws in the stator winding
insulation of high-voltage electrical machines based on statistical parameters of the PD spectra is developed and practically
implemented. 相似文献