Solid polymer electrolytes of blends of polyurethane and polyether modified polysiloxane and their ionic conductivity

Polymer electrolytes based on thermoplastic polyurethane (TPU) and polyether modified polysiloxane (PEMPS) blend with lithium salts were developed via an in-situ polymerization of TPU with the presence of PEMPS and salts. Morphological study of TPU/PEMPS electrolytes showed that TPU and PEMPS were immiscible and TPU/PEMPS electrolytes had a multiphase morphology. The lithium salt enhanced the interfacial compatibilization between TPU and PEMPS via the interaction of lithium ions with different phases. Three lithium salts with different interaction strengths with TPU and PEMPS were used to prepare TPU/PEMPS electrolytes with different levels of phase compatibilization: LiCl, LiClO₄, and LiN(SO₂CF₃)₂ (LiTFSI). The effect of PEMPS on ionic conductivity, dimensional stability and thermal stability of TPU/PEMPS electrolytes and their relationship with the blend morphology were investigated. TPU/PEMPS electrolytes showed good dimensional stability and thermal stability. The addition of PEMPS to TPU increased the ionic conductivity of TPU/PEMPS electrolytes. The room temperature ionic conductivity of TPU/PEMPS electrolytes with LiTFSI can reach up to 2.49 × 10⁻⁵ S/cm.     

Electrochemical properties of non-aqueous electrolytes containing spiro-type ammonium salts

Electrochemical properties of organic solvent electrolytes containing salt additive were investigated by means of cyclic voltammetry, ionic conductivity and charge–discharge curve. The electrolyte was prepared by a mixture of propylene carbonate (PC) and dimethyl carbonate (DMC), tetraethylammonium tetrafluoroborate (TEABF₄) and spiro-1,1′-bipyrolidinium tetrafluoroborate (SBPBF₄) as a salt additive. The aim of this paper is to evaluate the effect of spiro-type quaternary ammonium salt on electrochemical properties. The bulk resistance of the mixture electrolytes and interfacial resistance were investigated using an AC impedance method. The result shows that SBPBF₄ has good solubility in PC/DMC and the ionic conductivity is comparable to TEABF₄ in PC/DMC. From the experimental results, by using the SBPBF₄ salt, the interfacial resistance was decreased and capacity and ionic conductivity were increased. These results may be due to the higher mobility or ion dissociation of the SBP cation with smaller ion size than the TEA cation against the meso- or micro-pores of the activated carbons electrode.     

Gel electrolytes based on lithium modified silica nano-particles

In this work lithium modified silica (Li-SiO₂) nano-particles were synthesized and used as a single ion lithium conductor source in gel electrolytes. It was found that Li-SiO₂ exhibited good compatibility with DMSO, DMA/EC (a mixture of N,N-dimethyl acetamide and ethylene carbonate) and the ionic liquid, N-methyl-N-propyl pyrrolidinium bis(trifluoromethylsulfonyl) amide ([C₃mpyr][NTf₂]). Several gel electrolytes based on Li-SiO₂ were obtained. These gel electrolytes were investigated by DSC, solid state NMR, conductivity measurements and cyclic voltammetry. Conductivities as high as 10⁻³ S/cm at room temperature were observed in these nano-particle gel electrolytes. The results of electrochemical tests showed that some of these materials were promising for using as lithium conductive electrolytes in electrochemical devices, with high lithium cycling efficiency evident.     

Morphology and ionic conductivity of thermoplastic polyurethane electrolytes

Thermoplastic polyurethane (TPU) with a mixture of soft segments [poly(ethylene glycol) (PEG) and poly(tetramethylene glycol) (PTMG)], denoted TPU‐M, was prepared as an ion‐conducting polymer electrolyte. TPUs with PEG and PTMG as soft segments were also synthesized individually as polymer electrolytes. The changes in the morphology and ion conductivity of the phase‐segregated TPU‐based polymer electrolytes as a function of the lithium perchlorate concentration were determined with differential scanning calorimetry, Fourier transform infrared spectroscopy, alternating‐current impedance, and linear sweep voltammetry measurements. Both solid and gelatinous polymer electrolytes were characterized in this study. The effect of temperature on conductivity was studied. The conductivity changes revealed the combined influence of PTMG and PEG units in TPU‐M. The swelling characteristics in a liquid electrolyte and the dimensional stability were evaluated for the three TPUs. Because of its dimensional stability and ionic conductivity, the TPU system containing both PEG and PTMG as soft segments was found to be more suitable for electrolyte applications. A room‐temperature conductivity of approximately 1 × 10^?4 was found for TPU‐M containing 50 wt % liquid electrolyte. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1154–1167, 2004     

New boron compounds as additives for lithium polymer electrolytes

A new class of difluoroalkoxyborane compounds ([R_nOBF₂]₂) containing oligooxyethylene groups of various molecular weight in the form of a methyl monoether (R_n = CH₃(OCH₂CH₂)_n, n = 1, 2, 3 and 7) has been obtained in the reaction of BF₃ etherate with appropriate glycols. ¹H, ¹¹B and ¹⁹F NMR spectral analysis of the derivatives obtained was carried out and the properties as Lewis acids of these derivatives have been compared with that of corresponding trialkoxyboranes and boron trifluoride in reaction with pyridine. The strength of the interaction of [R₂OBF₂]₂ with the differing in “hardness” anions of various lithium salts has been analyzed on the basis of NMR spectra. The [R_nOBF₂]₂ obtained were used as additives for polymer electrolytes containing PEO as polymer matrix and various lithium salts at an equimolar ratio of the boron compound to salt. The highest ionic conductivities, in the order 10⁻⁵ to 10⁻⁴ S cm⁻¹ at 20-70 °C, were achieved for systems containing LiI and LiN(CF₃SO₂)₂. The lithium transference number (t₊) values, determined by the electrochemical method by steady-state technique for LiF and LiCF₃SO₃ are in the 0.6-0.8 range.     

A study on the preparation of oriented beta"-alumina ceramics using rod/flake-like boehmite as precursors and their properties

As a material for solid electrolytes and separators, beta"-Al₂O₃ is widely used in sodium beta alumina. In this study, a high fraction of beta"-phase for beta"-Al₂O₃ with preferred orientation was fabricated using the traditional solid-phase synthesis; and the effect of boehmite micro-structure, the aluminum source, on the phase, microstructure, mechanical properties, and conductivity properties of prepared ceramics was investigated. X-ray diffraction (XRD), and scanning electron microscopy (SEM) results illustrate that the C-axis of beta"-Al₂O₃ grains was along the direction of uniaxial compression. Above all, samples made of rod-shaped boehmite exhibited a better degree of orientation (0.21) and a higher fraction of beta" phase (96 %) than samples made of flake-shaped boehmite. Meanwhile, for samples fabricated with rod-shaped boehmite, the conductivity at 350 ℃ of the sample surface parallel to the uniaxial pressure was nearly 1.5 times (1.634E-1 S cm⁻¹) greater than that of surface perpendicular to the uniaxial pressure.     

PVdF-HFP/P123 hybrid with mesopores: a new matrix for high-conducting, low-leakage porous polymer electrolyte

Highly conducting porous polymer electrolytes comprised of poly(vinylidene-fluoride-co-hexafluoropropylene) (PVdF-HFP), polyethylene oxide-co-polypropylene oxide-co-polyethylene oxide (P123), ethylene carbonate (EC), propylene carbonate (PC), and LiClO₄ were fabricated. The PVdF-HFP/P123 hybrid polymer membranes were made with a phase inverse method and the electrolyte solution uptake was carried out in glove box to avoid the moisture contamination. It was found that when a small amount of polymer surfactant (P123) was blended into the PVdF-HFP, mesopores with well-defined sizes were formed. Impedance spectroscopy showed that the room temperature conductivity of (PVdF-HFP)/P123 polymer electrolytes increased as the content of P123 increased up to 4×10⁻³ S/cm. Nitrogen adsorption isotherms, electrolyte solution uptake, porosity measurements, and SEM micrographs showed that the enhanced conductivity was due to increase the pore volume, pore density, and electrolyte uptake. The highest conduction was found when the weight ratio of P123 to PVdF-HFP was 70%, when big channels were formed in the hybrid polymer membrane. Furthermore, blending P123 in PVDF-HFP reduced the pore size of polymer membrane, therefore, the solution leakage was also reduced. These polymer electrolytes were stable up to 4.5 V (vs Li/Li⁺) and the performance of the model lithium ion battery made by sandwiching the polymer electrolyte between a LiCoO₂ anode and a MCMB cathode, showed great promise for the use of these polymer electrolytes in lithium ion batteries.     

Gel-based composite polymer electrolytes with novel hierarchical mesoporous silica network for lithium batteries

In the present work, novel gel-based composite polymer electrolytes for lithium batteries were prepared by introducing a hierarchical mesoporous silica network to the poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP)-based gel electrolytes. As compared with the PVDF-HFP-based gel electrolytes with/without conventional nano-sized silica fillers, the novel electrolytes have shown more homogeneous microstructure, higher ionic conductivity and better mechanical stability, which could be caused by the strong silica network and the effective interactions among the polymer, the liquid electrolytes and the silica. Moreover, the cell with this kind of electrolytes could achieve a discharge capacity as much as 150 mAh g⁻¹ at room temperature (LiCoO₂ as the cathode active material), with high Coulomb efficiency.     

Synthesis and electrochemical properties of lithium methacrylate-based self-doped gel polymer electrolytes

In this study, a strategy for synthesizing lithium methacrylate (LiMA)-based self-doped gel polymer electrolytes was described and the electrochemical properties were investigated by impedance spectroscopy and linear sweep voltammetry. LiMA was found to dissolve in ethylene carbonate (EC)/diethyl carbonate (DEC) (3/7, v/v) solvent after complexing with boron trifluoride (BF₃). This was achieved by lowering the ionic interactions between the methacrylic anion and lithium cation. As a result, gel polymer electrolytes consisting of BF₃-LiMA complexes and poly(ethylene glycol) diacrylate were successfully synthesized by radical polymerization in an EC/DEC liquid electrolyte. The FT-IR and AC impedance measurements revealed that the incorporation of BF₃ into the gel polymer electrolytes increases the solubility of LiMA and the ionic conductivity by enhancing the ion disassociations. Despite the self-doped nature of the LiMA salt, an ionic conductivity value of 3.0 × 10⁻⁵ S cm⁻¹ was achieved at 25 °C in the gel polymer electrolyte with 49 wt% of polymer content. Furthermore, linear sweep voltammetry measurements showed that the electrochemical stability of the gel polymer electrolyte was around 5.0 V at 25 °C.     

Influence of cold sintering process on the structure and properties of garnet-type solid electrolytes

Li-stuffed garnet oxides are one of the most promising solid electrolytes for Li batteries, but their development is impeded by the overly high sintering temperature (above 1000 °C), which causes uncontrollable Li evaporation and poor repeatability of synthesis. The present study evaluates the possibility of addressing this issue using a recently developed technique called cold sintering process (CSP). We demonstrates that CSP can easily realize a high density of 87.7% at an extremely low temperature of 350 °C. However, the material becomes air sensitive after CSP, and the conductivity is degraded. Detailed structural and chemical analyses reveal that such detrimental effects arise from the inter-granular phase induced by the preferential dissolution of Al and Li. Therefore, in order to take full advantage of CSP during solid-electrolyte fabrication, the incongruent dissolution issue must be the focal point of improvement. Our results suggest that CSP is a promising solution to the overly high sintering temperature of garnet electrolytes, and deserves more attention in future studies.     

Effect of surface modified porous inorganic-organic hybrid polyphosphazene nanotubes on the properties of polyethylene oxide based solid polymer electrolytes

2-(2-methyloxyethoxy)ethanol modified poly (cyclotriphosphazene-co-4,4′-sufonyldiphenol) (PZS) nanotubes were synthesized and solid composite polymer electrolytes based on the surface modified polyphosphazene nanotubes added to PEO/LiClO₄ model system were prepared. Differential Scanning Calorimetry (DSC) and Scanning Electron Microscopy (SEM) were used to investigate the characteristics of the composite polymer electrolytes (CPE). The ionic conductivity, lithium ion transference number and electrochemical stability window can be enhanced after the addition of surface modified PZS nanotubes. The electrochemical investigation shows that the solid composite polymer electrolytes incorporated with PZS nanotubes have higher ionic conductivity and lithium ion transference number than the filler SiO₂. Maximum ionic conductivity values of 4.95 × 10⁻⁵ S cm⁻¹ at ambient temperature and 1.64 × 10⁻³ S cm⁻¹ at 80 °C with 10 wt % content of surface modified PZS nanotubes were obtained and the lithium ion transference number was 0.41. The good chemical properties of the solid state composite polymer electrolytes suggested that the inorganic-organic hybrid polyphosphazene nanotubes had a promising use as fillers in solid composite polymer electrolytes and the PEO₁₀-LiClO₄-PZS nanotubes solid composite polymer electrolyte can be used as a candidate material for lithium polymer batteries.     

Ionic conductivities of solid polymer electrolyte/salt systems for lithium secondary battery

We establish a new ionic conductivity model based on the Nernst-Einstein equation in which the diffusion coefficient is derived from modified double lattice-nonrandom-Pitzer-Debye-Hückel (MDL-NR-PDH) model. The proposed model takes into account the mobility of the salt and the motion of the polymer host simultaneously by expressing the effective chemical potential as the sum of chemical potentials of the salt and the polymer. To describe the segmental motion of the polymer chain, which is the well-known conduction mechanism for solid polymer electrolyte (SPE) systems, the effective co-ordinated unit parameter is introduced. The obtained co-ordinated unit parameter for each state is used to describe the behavior of the ionic conductivities of the given systems. Good agreement is obtained upon comparison with experimental data of various PEO and salt systems in the interested ranges.     

Synthesis, structure characterization and ionic conductivity of star-branched organic-inorganic hybrid electrolytes based on cyanuric chloride, diamine-capped poly(oxyalkylene) and alkoxysilane

A synthesis route for preparing highly conductive solid organic-inorganic hybrid electrolytes has been developed by using cyanuric chloride as the coupling core to react with diamino-terminated poly(oxyalkylene) triblock copolymers, followed by cross-linking with an epoxy alkoxysilane 3-glycidyloxypropyl trimethoxysilane via a sol-gel process. The present hybrid electrolyte with a [O]/[Li] ratio of 32 was found to be the most conductive, reaching a maximum lithium ion conductivity of 6.8 × 10⁻⁵ Scm⁻¹ at 30 °C. The Li-ion mobility was determined from ⁷Li static NMR line width measurements and correlated with their ionic conductivities. The onset of ⁷Li line narrowing was closely related to the T_g of the hybrid electrolytes as measured by DSC experiments. Thus, the motions of the lithium cations are strongly coupled with the segmental motion of the polymer chains, which is in line with the Vogel-Tamman-Fulcher behavior as observed in ionic conductivity.     

The phase structure,chain diffusion motion and local reorientation motion: C Solid-state NMR study on the highly-crystalline solid polymer electrolytes

In our previous paper, we investigated the influence of the phase structure on the polymeric chain diffusion in the complexed crystals of solid polymer electrolytes of PEO:LiAsF₆ and PEO:LiCF₃SO₃. We observed that with the increase of the crystallinity, the chain diffusion rate decreases dramatically. In this work, by employing the ¹³C CODEX NMR spectroscopy, we demonstrate that opposite to the behavior of the chain diffusion motion, the local reorientation motion of polymeric chains within the complexed crystals are greatly increased with the increase of the crystallinity, which is accompanied by the change of the phase structure. The relationship between the different molecular motions within the complexed crystals and the phase structure are discussed therefore.     

Thermal, electrical and mechanical properties of plasticized polymer electrolytes based on PEO/P(VDF-HFP) blends

The polymer electrolytes composed of a blend of poly(ethylene oxide) (PEO) and poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) as a host polymer, mixture of ethylene carbonate (EC) and propylene carbonate (PC) as a plasticizer, and LiClO₄ as a salt were prepared by a solution casting technique. SEM micrographs show that P(VDF-HFP) is very compatible with PEO. The ionic conductivity of the electrolytes increases with increasing plasticizer content, while the mechanical properties become obviously worse. By addition of a certain content of PEO in P(VDF-HFP) matrix, a good compromise between high ionic conductivity and mechanical stability can be obtained.     

用于锂离子电池的改性凝胶聚合物电解质

综述了凝胶聚合物电解质的性能影响因素和改性方法;着重介绍了无机纳米粒子掺杂改性;论述了近年来离子液体在聚合物电解质方面的应用;展望了凝胶聚合物电解质的发展及应用前景。     

Nanocomposite polymer electrolyte comprising PEO/LiClO4 and solid super acid: effect of sulphated-zirconia on the crystallization kinetics of PEO

A novel PEO-based nanocomposite polymer electrolyte is prepared by using solid super acid sulphated-zirconia (, SZ) as the filler. Polarized optical microscopy (POM) and differential scanning calorimeter (DSC) results show that part of SZ particles may act as the nucleus of PEO spherulites and thus increase the amount of PEO spherulites. On the other hand, other SZ particles, which do not act as the nucleus, can restrain the recrystallization tendency of PEO chains through Lewis acid-base interaction and hence decrease the growth speed of PEO spherulites. As a result, the PEO component in PEO-LiClO₄-SZ can maintain a high amorphous state for a long time. The room temperature ionic conductivity of PEO-LiClO₄-SZ is relative high and stable compared with pristine PEO-LiClO₄, indicating that it is promising for all solid-state rechargeable lithium ion batteries.     

Synthesis and electrochemical characterization of PEO-based polymer electrolytes with room temperature ionic liquids

New gel polymer electrolytes containing 1-butyl-4-methylpyridinium bis(trifluoromethanesulfonyl)imide (BMPyTFSI) ionic liquid are prepared by solution casting method. Thermal and electrochemical properties have been determined for these gel polymer electrolytes. The addition of BMPyTFSI to the P(EO)₂₀LiTFSI electrolyte results in an increase of the ionic conductivity, and at high BMPyTFSI concentration (BMPy⁺/Li⁺ = 1.0), the ionic conductivity reaches the value of 6.9 × 10⁻⁴ S/cm at 40 °C. The lithium ion transference numbers obtained from polarization measurements at 40 °C were found to decrease as the amount of BMPyTFSI increased. However, the lithium ionic conductivity increased with the content of BMPyTFSI. The electrochemical stability and interfacial stability for these gel polymer electrolytes were significantly improved due to the incorporation of BMPyTFSI.     

Influence of plasticizer contents on the properties of HEC-based solid polymeric electrolytes

Solid polymeric electrolytes were obtained by the plasticization process of hydroxyethylcellulose (HEC) with different quantities of glycerol and addition of lithium trifluoromethane sulfonate (LiCF₃SO₃) salt. The samples were prepared in the form of transparent films with very good adhesion properties. These films were characterized by X-ray diffraction, thermal analysis (DSC) and UV-NIR spectroscopy. The ionic conductivity measurements were obtained by impedance complex spectroscopy as a function of both salt contents and temperature. The best conductivity values of 1.07 × 10⁻⁵ S/cm at 30 °C and 1.06 × 10⁻⁴ S/cm at 83 °C were obtained for the samples of HEC plasticized with 48% of glycerol and containing [O]/[Li] = 6. These results show that plasticized HEC is a very good material to be used for the preparation of new solid polymeric electrolytes.