A novel conjugated polymer based on cyclopenta[def]phenanthrene backbone with spiro group

Poly(2,6-(4,4-bis(2-ethylhexyl)-4H-cyclopenta[def]phenanthrene)) (PCPP) is a stable blue light emitting conjugated polymer even after annealing at 150 °C or operation of the device in air. The spiro form of PCPP, poly(2,6-(3′,6′-bis(2-ethylhexyloxy)-4,4′-spirobi(4H-cyclopenta[def]phenanthrene))) (spiro-PCPP), has been synthesized by Yamamoto polymerization. The PL emission spectrum of the polymer in THF solution shows a maximum peak at 398 nm, nearly identical with that of PCPP. The PL spectrum of the polymer in the solid state exhibits a maximum peak at 451 nm, which is red-shifted over 50 nm from that of the solution, due to the inter-chain interaction of the polymers. The PL spectra of spiro-PCPP in the mixture of THF and MeOH from 9:1 to 3:7 ratios showed increasing peaks at 458 and 484 nm. With an increased ratio of the hydrophilic solvent (MeOH), the inter-chain interaction of the hydrophobic polymers was enhanced to show peaks at 458 and 484 nm. This phenomenon has the same tendency as compared to the PL spectrum in solid thin film state. The polymer LED with the configuration of ITO/PEDOT/spiro-PCPP/Ca:Al emitted light with maximum peaks at around 463 nm. The emission color of the spiro-PCPP device is sky blue with the CIE coordinates of (0.14, 0.15), which are close to those of the standard blue (0.14, 0.08).     

Synthesis, characterization and photovoltaic properties of random poly(arylene-vinylene)s containing benzothiadiazole

New random poly(arylene-vinylene)s obtained by combining different amounts of benzo[2,1,3]thiadiazole units with 9,9-dialkylfluorene and/or 1,4-dialkoxybenzene building blocks were synthesized by the Suzuki-Heck polymerization and characterized for use in bulk hetero-junction solar cells. Their optical, electrochemical, morphological and photovoltaic features were investigated. Notwithstanding the relatively low weight-average molecular weights of the obtained polymers (7000-13000 Da), they formed good quality films by spin-coating. UV-Vis measurements permitted the evaluation of their band gap (1.77-2.12 eV), enabling them to harvest a broad portion of the solar spectrum from 350 nm to 650-700 nm. An electrochemical study revealed that the copolymers are endowed with HOMO/LUMO energy levels suitable for both an efficient electron transfer and a high open circuit voltage (V_oc) for devices embodying the polymer/PCBM blends. This investigation pinpoints the important role of the copolymer composition (in terms of molar ratio of the monomeric units) on the performance of the donors in BHJs. In fact, in disagreement with the presumed V_oc and current densities, the terpolymer poly[1,4-bis(2-ethylhexyloxy)-2,5-phenylene-vinylene-co-9,9-bis(2-ethylhexyl)-2,7-fluorenylene-vinylene-co-4,7-benzo[2,1,3]thiadiazolylene-vinylene] showed the best performance of the copolymer series, with a PCE of 0.4% and a V_oc of 0.76 V, probably due to the favorable phase separation in the blend and consequently a better exciton dissociation.     

Experimental and computational studies of 4H-cyclopenta[2,1-b:3,4-b′]dithiophen-4-one (CPDTO)-oligomers

4H-Cyclopenta[2,1-b:3,4-b′]dithiophen-4-one (CPDTO), CPDTO ketal (CPDTO-k) and their oligomers have been synthesized and their optical absorption, fluorescent, electrochemical properties are characterized. Structure optimization and time-dependent energy calculation have been carried out for (CPDTO-k)_1,2,3,6 and (CPDTO)_1,2,3,6 using the B3LYP functional and standard split valence plus polarization basis set 6-31G(d,p) in the DFT formalism. The pi conjugation between carbonyl oxygen and thiophene, which is orthogonal to the backbone conjugation, is evident from the DFT calculation and analysis, and is responsible for the observed slower narrowing of bandgaps (E_g) of CPDTO oligomers with increasing number of repeat units. The orthogonal conjugation also leads to different distribution of LUMO from that of HOMO and makes CPDTO oligomers weak in the lowest energy absorption. Enhanced intensity and red-shifted peak wavelength of the lowest energy UV–vis absorption of CPDTO film suggest the presence of strong intermolecular interactions among CPDTO molecules in the solid state, which may explain why the bandgap (1.1–1.2 eV) reported for the electrochemically deposited CPDTO homopolymer film is significantly lower than the bandgap (1.5–1.7 eV) estimated in this study for PCPDTO chloroform solution from the E_gs of CPDTO oligomers.     

Influence of 4-N,N-dimethylaminopyridine on the photovoltaic performance of dye-sensitized solar cells with poly(ethyleneoxide)/oligo(ethylene glycol) blend electrolytes

4-N,N-Dimethylaminopyridine (DMAP) was introduced into poly(ethyleneoxide)/oligo(ethylene glycol) (PEO/PEG) electrolytes for dye-sensitized solar cells (DSCs). The improved photovoltaic performance of DMAP-doped DSCs was attributed to the integrated effects of the upward displacement of the TiO₂ band edge and the decrease in the electron recombination rate. Remarkably, the presence of DMAP suppresses electron recombination via two combined pathways involving the dissociation of triiodide to iodide by a complexation reaction and a modification of the surface state distribution in the band gap of TiO₂. With the addition of DMAP, the open-circuit voltage enhances dramatically. The short-circuit photocurrent density has a small increase at low DMAP concentration and drops afterwards. The power conversion efficiency is 4.07%, which corresponds to a 63% increase over that of the DSC without DMAP.     

Theoretical studies of the electronic structures and optical properties of stable blue-emitting polymer based on 4H-cyclopenta-[def]-phenanthrene

Geometries, ionization potentials (IPs), electron affinities (EAs) and optical properties of two series of π-conjugated oligomers (2,6-(4,4-bis(2-ethylthexyl)-4H-cyclopenta-[def]-phenanthrene))_nCPPn (2,6-(4,4-bis(2-ethylthexyl)-8,9-dihydro-4H-cyclopenta-[def]-phenanthrene))_nHCPPn (n = 1-4) were studied theoretically. The ground and the excited state geometries were optimized by B3LYP and CIS methods with 6-31G^∗ basis sets, respectively. The absorption and the emission spectra were calculated by TD-B3LYP method. The lowest-lying absorption is assigned to π → π^∗ transition, and the fluorescence can be described as originating from the ¹[ππ^∗] excited state. IPs, EAs, H-L gaps, absorption and emission properties of PCPP (n = ∞) and PHCPP (n = ∞) were obtained by extrapolation method. The fact that the lowest-lying absorption and the emission of PCPP are blue-shifted compared with those of PHCPP, can be interpreted by the smaller effective repeating units of PCPP. The extra absorption band at 289 nm of PCPP is contributed by the π → π^∗ transition involving the extra π-conjugation CC bond.     

A comparison of the photovoltaic response of head-to-head and head-to-tail coupled poly{(benzo-2,1,3-thiadiazol-4,7-diyl)-(dihexyl[2,2’]dithiophene-5,5’-diyl}

Summary The synthesis of two copolymers of benzothiadiazole and dihexyldithiophene were obtained by employing oxidative ferric chloride polymerisation and Stille cross coupling polymerisation. Weight average molecular weights of respectively 15200 g mol^-1 and 3200 g mol^-1 were obtained. The polymers have an optical band gap of ∼2 eV. Photovoltaic devices were prepared using the pure polymer materials and mixtures of the polymers and a soluble fullerene derivative. Efficiencies of 0.024% were obtained. Head-to-head and head-to-tail coupling was not found to influence the maximum photovoltaic performance that could be obtained.     

Synthesis, electroluminescence, and photovoltaic properties of dendronized poly(p-phenylene vinylene) derivatives

Two dendronized poly(p-phenylene vinylene) (PPV) derivatives, ED-PPV and BB-PPV, have been successfully synthesized according to the Gilch route. The obtained polymers possess excellent solubility in common solvents, good thermal stability with 5% weight loss temperature of more than 340 °C. The weight-average molecular weight (M_w) and polydispersity index (PDI) of ED-PPV and BB-PPV are in the range of (1.26-2.34)×10⁵ and 1.37-1.45, respectively. Polymer light-emitting diodes (PLEDs) with the configuration of ITO/PEDOT:PSS/polymer/Ca/Al devices were fabricated, and the PLEDs emitted green-yellow light. The turn-on voltages of the PLEDs based on ED-PPV and BB-PPV were approximately 4.3, and 4.5 V, respectively. The PLED devices of ED-PPV exhibited the maximum luminance of about 157 cd/m² at 10.5 V. Photovoltaic cells with the configuration of ITO/PEDOT:PSS/polymer:C₆₀ (1:1)/Al were also fabricated, and the energy conversion efficiency of the devices based on ED-PPV and BB-PPV was measured to be 0.58, and 0.014%, respectively, under the white light at 75 mW/cm².     

Purple red and luminescent polyiminoarylenes containing the 1,4-diketo-3,6-diphenylpyrrolo[3,4-c]pyrrole (DPP) chromophore

New DPP-containing polyiminoarylenes were prepared from 1,4-diketo-2,5-dihexyl-3,6-di(4′-bromophenyl)pyrrolo[3,4-c]pyrrole and various arylamine derivatives using palladium-catalyzed amination reactions. The arylamine comonomers were aniline (ANI), t-butylaniline (TBA), 2-aminoanthracene (AAN), 1-aminopyrene (APY) and N,N′-diphenyl-p-phenylenediamine (PDA). Purple red polymers with good solubility in common organic solvents and molecular weights between 4.4 and 35.8 kDa were obtained. Polymer solutions were readily fluorescent with quantum yields between 19 and 62%, while solution-cast films only showed a weak fluorescence. All polymers exhibit low band gaps of approximately 1.9 eV. Cyclovoltammetric studies indicate quasireversible oxidation for polymers with TBA, APY and PDA as comonomer units, and quasireversible reduction for the polymer with AAN comonomer unit. Polymers with APY and PDA comonomer units are electrochromic and can be switched between red in the neutral and greenish grey in the oxidized state.     

Unique orientation textures formed in miscible blends of poly(vinylidene fluoride) and poly[(R)-3-hydroxybutyrate]

The oriented crystallization of poly[(R)-3-hydroxybutyrate] (PHB) in the miscible blends with poly(vinylidene fluoride) (PVDF) was investigated with various compositions. The PVDF/PHB blend films were prepared by solution casting and subsequent melt-quenching in ice water. Oriented films of the blends were prepared by uniaxially stretching the melt-quenched film at 0 °C in ice water using a hand-operated stretching apparatus. The oriented blend films were heat-treated at a fixed length in order to crystallize PHB in the oriented state. The crystal orientation and the lamellar textures of the obtained samples were studied with wide-angle X-ray diffraction (WAXD), and small-angle X-ray scattering (SAXS), respectively. The SAXS measurements showed that a considerable amount of molecular chains of PHB are excluded from the lamellar stacks of PVDF and exist in the interfibrillar regions in the oriented films of the blends. The cold crystallization of PHB in the interfibrillar region results in the orientation of PHB crystals, and the type of crystal orientation depends upon the composition of the blends. For the PVDF/PHB=4/6-7/3 blends, the crystal a-axis of PHB is highly oriented parallel to the drawing direction and the crystal c-axis (molecular chain axis) in PHB crystals is perpendicular to the drawing direction, i.e. orthogonal to the chain axis of the crystals of PVDF. It is considered that the a-axis orientation is induced by the confinement of crystal growth in the interfibrillar nano-domains. For the PVDF/PHB=2/8-3/7 blends, however, the crystal c-axis of PHB is primarily oriented in the drawing direction, suggesting that the stressed molecular chains of PHB are crystallized with the molecular orientation retained.     

A crystalline low-bandgap polymer comprising dithienosilole and thieno[3,4-c]pyrrole-4,6-dione units for bulk heterojunction solar cells

We have used Stille coupling polymerization to synthesize a new low-bandgap conjugated polymer, PDTSTPD, that consists of an electron-rich dithieno[3,2-b:2′,3′-d]-silole (DTS) unit and an electron-deficient thieno[3,4-c]pyrrole-4,6-dione (TPD) moiety. The polymer exhibited an excellent thermal stability, crystalline characteristics, a broad spectral absorption, and a deep highest occupied molecular orbital (HOMO) energy level, resulting from combination of the rigid TPD and the coplanar DTS units in the polymer backbone. Moreover, the presence of the silicon atoms along the polymer chain ensured PDTSTPD having strong interchain stacking and good hole mobility. An optimal device incorporating the PDTSTPD:PC₇₁BM blend at a weight ratio of 1:1 provided a power conversion efficiency of 3.42%.     

Low bandgap polymers with benzo [1,2-b:4,5-b′] dithiophene and bisthiophene-dioxopyrrolothiophene units for photovoltaic applications

New donor/acceptor polymers PBDTTPT1 and PBDTTPT2 with alternating benzodithiophene (BDT) and bisthiophene-dioxopyrrolothiophene (TPT) units were synthesized by Stille coupling reaction. The polymers had optical bandgaps of 1.78 and 1.82 eV, and HOMO energy levels of −5.30 and −5.35 eV for PBDTTPT1 and PBDTTPT2, respectively. Polymeric solar cell devices based on these copolymers as donors and PC₇₁BM as acceptor showed the highest open circuit voltage of 0.95 V and power conversion efficiency of 2.68% under the illumination of AM 1.5, 100 mW/cm².     

The use of poly(vinylpyridine-co-acrylonitrile) in polymer electrolytes for quasi-solid dye-sensitized solar cells

Poly(vinylpyridine-co-acrylonitrile) (P(VP-co-AN)) was used to form polymer electrolytes for dye-sensitized solar cells (DSSCs). The effects of P(VP-co-AN) on the photovoltaic performances of DSSCs have been investigated with nonaqueous electrolytes containing alkali-iodide and iodine. It was found that the effect of P(VP-co-AN) on V_oc closely related to its amount in the electrolyte. Lower amount of P(VP-co-AN) was benefit for the construction of a solar cell containing P(VP-co-AN) with higher energy conversion efficiency. Chemically crosslinking solidification with backbone polymer P(VP-co-AN) amount of 3% fabricated quasi-solid DSSCs with 10% increased conversion efficiencies with relative to that of the initial liquid DSSCs.     

Substituent-induced delocalization effects on hydrogen-bonding interaction in poly(N-phenyl methacrylamide) derivatives

Within small molecules, the hydrogen-bonding behaviors affected by delocalization have been studied thoroughly, but rare publication in macromolecules. Therefore, three poly(N-phenyl methacrylamide)s, poly(N-phenyl methacrylamide) (PNPAA), poly(N-4-methoxyphenyl methacrylamide) (PMPMA) and poly(N-4-bromophenyl methacrylamide) (PBPMA), with different inductive substitution at para position of benzene ring are prepared to investigate the substituent-induced delocalization effects on the hydrogen-bonding interaction behaviors. In this study, the variable-temperature FTIR spectrum is used as tool to study the self- and inter-association hydrogen-bonding interaction. FTIR analyses could provide evidences that there is relatively stronger inter-associative hydrogen bonding in poly(N-4-bromophenyl methacrylamide)/P4VP blends. High resolution ¹³C CP/MAS solid-state NMR analyses indicate that the spin-lattice relaxation time (T₁ρ^H) in all PBPMA blends are homogeneous on the scale at which spin-diffusion occurs within the time T₁ρ^H, also due to the enhancement by substituent inductive delocalization.     

Amphiphilic poly(vinyl chloride)-g-poly(oxyethylene methacrylate) graft polymer electrolytes: Interactions, nanostructures and applications to dye-sensitized solar cells

An amphiphilic graft copolymer, i.e. poly(vinyl chloride)-graft-poly(oxyethylene methacrylate) (PVC-g-POEM) comprised of a PVC backbone and POEM side chains was synthesized via atom transfer radical polymerization (ATRP) and complexed with a salt for dye-sensitized solar cell (DSSC) applications. The coordinative interactions and structural changes of polymer electrolytes were investigated using FT-IR spectroscopy, wide angle X-ray scattering (WAXS) and differential scanning calorimetry (DSC). Small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) revealed that the d-spacing between PVC domains was significantly increased upon the introduction of metal salt, ionic liquid and oligomer, indicating their selective confinement in the hydrophilic POEM domains. The ion-conducting POEM domains were well interconnected, resulting in high ionic conductivity (∼10⁻⁴ S/cm at 25 °C) and energy conversion efficiency (∼5.0% at 100 mW/cm²) in the solid-state.     

Surface quantitative characterization of poly(styrene-co-4-vinyl phenol)/poly(styrene-co-4-vinyl pyridine) blends with controlled hydrogen bonding interactions

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) was used to quantitatively correlate to the surface chemical composition determined from XPS in poly(styrene-co-4-vinyl phenol) (STVPh)/poly(styrene-co-4-vinyl pyridine) (STVPy) blends or complexes when the hydroxyl contents in STVPh copolymers were gradually increased. It was found that different mixing thermodynamics such as immiscibility, miscibility and complexation has little effect on the quantitative analysis of surface concentrations in the blends or complexes using ToF-SIMS. In the positive spectra, the normalized intensities or relative peak intensities can both be used to quantitatively analyze the surface vinyl phenol (VPh), styrene and vinyl pyridine (VPy) concentrations when peaks at m/z=119, 120 are used for VPh, peaks at m/z=103, 105, 115 for styrene and peaks at m/z=80, 93, 106 for VPy monomer units. In the negative spectra, the normalized intensities of peaks characteristic of VPh monomer units (m/z=16, 17, 93) seems to be not affected by hydrogen bonding formation and can be used in quantitative analysis.     

Determination of electron inelastic mean free paths for poly[methyl(phenyl)silylene] films

The inelastic mean free paths (IMFPs) of electrons at a poly[methyl(phenyl)silylene] thin film surface were determined using elastic peak electron spectroscopy (EPES) and Monte Carlo calculations for a wide electron energy range, 200-1600 eV. We considered the surface composition determined from X-ray induced photoelectron spectra (XPS), the hydrogen concentration evaluated by EPES, and a correction for surface excitations. The results compare well to those calculated from the predictive TPP-2M and G1, formulae. Calculations carried out with the quantitative structure-property relationship of Cumpson and the formula of Ashley and Williams provide larger IMFP values, and can be useful only for a rough estimation.     

Optically active poly[thio-1-(N,N-diethylaminomethyl) ethylene]

Poly[thio-1-(N,N-diethylaminomethyl) ethylene] [poly(TDAE)] of different optical purities were prepared by stereoelective polymerization of racemic N,N-diethyl-N-(thiirane-2-ylmethyl) amine (TDAE) using a (1:1) $\text{ZnEt}{}_2\text{R}$ (?) 3,3-dimethyl 1,2-butanediol (R(?)DMBD) chiral initiator system. Optically enriched TDAE samples were isolated as residual monomers. These monomers were thermally polymerized to give optically active poly(TDAE) with randomly distributed R and S repeat units in various proportions. The configuration of the enantiomer preferentially incorporated into growing chains during the stereoelective polymerization was determined as R on the basis of the presence of a positive Cotton effect at 260 nm in the c.d. spectrum of residual monomers. This configuration agrees well with the known homosteric character of the $\text{ZnEt}{}_2\text{(?)}\text{DMBD}$ initiator system. ¹³C n.m.r. spectra of the different optically active poly(TDAE) samples and those of more or less stereoregular racemic ones were compared. It was found that the carbon atom of the main chain methine group is the only one which is stereosensitive. Observed triad effects were used to determine the degree of isotacticity of optically active poly(TDAE)s prepared by thermal polymerization of partly enriched monomers. The stereoelectivity of the initiator system and the optical activity of optically pure TDAE and poly(TDAE) were deduced. Side-chain nitrogen atoms did not show any competitive effect with sulphur atoms in the coordination process to the chiral initiator system.     

Correlation between polymer architecture, mesoscale structure and photovoltaic performance in side-chain-modified poly(p-arylene-ethynylene)-alt-poly(p-arylene-vinylene): PCBM bulk-heterojunction solar cells

Recent investigations have shown that an anthracene containing poly(p-arylene-ethynylene)-alt-poly(p-arylene-vinylene) statistical copolymer consisting of a well defined conjugated backbone, along which linear and branched alkoxy side chains are attached in a random manner, yields, compared to its counterparts with regular side chain substitution, an improved performance in polymer [6,6]:-phenyl-C₆₁-butyric acid methyl ester (PCBM) bulk-heterojunction solar cells. The microscopic origin for the improved power conversion efficiency (η ≈ 3.8%) of the statistical copolymer - which is the best in its material class - has not been resolved. We conducted grazing incidence wide-angle x-ray scattering investigations in order to correlate the nanomorphology of the active layers to the photovoltaic performance of the device. A comparison of the results obtained for the statistical copolymer to those obtained for the corresponding regular copolymers shows that the improved performance of the former may be attributed to a combination of the following structural characteristics: 1. well, ordered stacked domains that promote backbone planarization, 2. partly face-on alignment of domains relative to the electrodes for an improved active layer-electrode charge transfer, and 3. a more isotropic domain orientation throughout the active layer that ensures that the backbone alignment direction has components perpendicular and parallel to the electrodes in order to compromise between light absorption and efficient intra-chain charge transport. The regular copolymers exhibiting inferior performance lack either sufficient stacking order or face-on alignment of the domains. None of them shows isotropic domain orientation.     

Synthesis and characterization of poly(1-vinyl-3-alkylimidazolium) iodide polymers for quasi-solid electrolytes in dye sensitized solar cells

A series of new poly(1-vinyl-3-alkylimidazolium) iodide polymers with different alkyl derivatives such as methyl, propyl and perflurodecyl have been synthesized. The alkyl substituent influenced some properties such as solubility, thermal stability, glass transition and crystallinity of the polymers. For instance, polymer having the propyl substituent was soluble in solvents of intermediate polarity such as acetonitrile, chloroform and THF, the one with the methyl substituent was only soluble in very polar solvents such as water and methanol and the fluorinated polymer was only soluble in DMF. The alkyl substituent also influenced the thermal stability in the order methyl > propyl > perflurodecyl and all the polymers thermally decomposed between 250 and 400 °C in nitrogen. The poly(1-vinyl-3-alkyl-imidazolium) iodide polymers having propyl and methyl substituents were amorphous polymers showing a glass transition temperature of 43 and 21 °C, respectively; and perflurodecyl polymers were semi-crystalline with a Tm at 153 °C and a Tg at 20 °C, as indicated by differential scanning calorimetry.Polymer electrolytes were formulated as mixtures of the ionic liquid 1-methyl-3-propylimidazolium iodide and the poly(1-vinyl-3-alkylimidazolium) iodide polymers. These polymer electrolytes showed ionic conductivities in the range of 10⁻³ to 10⁻⁷ S/cm at room temperature which strongly depended on the ionic liquid content. Finally, poly(1-vinyl-3-propyl-imidazolium) iodide was used to obtain gel electrolytes by adding it to a typical acetonitrile electrolyte used in dye sensitized solar cells (DSSCs). Solar cells with 1 cm² area prepared using the polymer gel electrolyte yielded a maximum light-to-electricity conversion efficiency of 3.73%.     

Influences of poly(ether urethane) introduction on poly(ethylene oxide) based polymer electrolyte for solvent-free dye-sensitized solar cells

A poly(ether urethane) (PEUR)/poly(ethylene oxide) (PEO)/SiO₂ based nanocomposite polymer is prepared and employed in the construction of high efficiency all-solid-state dye-sensitized nanocrystalline solar cells. The introduction of low-molecular weight PEUR prepolymer into PEO electrolyte has greatly enhance the electrolyte performance by both improving the interfacial contact properties of electrode/electrolyte and decreasing the PEO crystallization, which were confirmed by XRD and SEM characteristics. The effects of polymer composition, nano SiO₂ content on the ionic conductivity and I₃⁻ ions diffusion of polymer-blend electrolyte are investigated. The optimized composition yields an energy conversion efficiency of 3.71% under irradiation by white light (100 mW cm⁻²).