Novel poly(diphenylacetylene)s with both alkyl and silyl groups as gas permeable membranes: Synthesis, desilylation, and gas permeability

Diphenylacetylenes having a dimethyloctylsilyl group and an alkyl group at para positions [Me₂n-C₈H₁₇SiC₆H₄CCC₆H₄R; R = H (1a), i-Pr (1b), t-Bu (1c), n-Bu (1d)] and having only an alkyl group [PhCCC₆H₄R; R = i-Pr (1B), t-Bu (1C)] were synthesized and then polymerized with TaCl₅/n-Bu₄Sn catalyst to provide the corresponding poly(diphenylacetylene)s (2a, 2b, 2c, 2d, 2B, and 2C). The formed polymers afforded tough free-standing membranes by casting from toluene solutions. Desilylation reaction of Si-containing membranes (2a-d) was carried out with trifluoroacetic acid to give the desilylated membranes (3a-d). The permeability of these membranes to O₂, N₂, and CO₂ were determined. All the Si-containing membranes exhibited almost the same gas permeability. The desilylation of Si-containing membranes of 2a-c resulted in large increase of gas permeability. No apparent increasing of gas permeability was observed in the desilylation of 2d. To clarify the effects of desilylation, CO₂ diffusivity (D(CO₂)), CO₂ solubility (S(CO₂)), and fractional free volume (FFV) of the polymer membranes were investigated. The S(CO₂) values of desilylated membranes were much larger than that of Si-containing counterparts. The D(CO₂) and FFV of membranes of 2a-c increased through desilylation. The desilylated membrane of 3d had small D(CO₂) value and almost the same FFV compared with 2d. Further, the comparison of the permeability between three types of membranes with the same chemical structure revealed that the microvoids were not generated by the desilylation of membranes of poly(diphenylacetylene)s containing alkyl groups.     

Synthesis and properties of various poly(diphenylacetylenes) containing tert-amine moieties

The polymerization of diphenylacetylene derivatives possessing tert-amine moieties, such as triphenylamine, N-substituted carbazole and indole, was examined in the presence of TaCl₅-n-Bu₄Sn (1:2) catalyst. A polymer with high molecular weight (M_w = 570 × 10³) was obtained in good yield by the polymerization of diphenylamine-containing monomer 1b, whereas the isopropylphenylamine derivative (1c) gave a polymer with relatively low molecular weight (M_w = 2.4 × 10³). The polymerization of monomer 1d containing cyclohexylphenylamine group did not proceed; however, carbazolyl- and indolyl-containing monomers also produced polymers. Poly(1b), poly(2f) and poly(4b) could be fabricated into free-standing membranes by casting toluene solutions of these polymers. The gas permeability of poly(1b) was too low to be evaluated accurately whereas poly(4b) possessing two chlorine atoms in the repeating unit showed higher gas permeability than that of poly(1b); furthermore, poly(2f) having trimethylsilyl and 3-methylindolyl groups exhibited relatively high gas permeability (). In the cyclic voltammograms of diphenylamino group-containing polymers, poly(1b) and poly(2b), the intensities of oxidation and reduction peaks decreased more than those of carbazolyl-containing poly(2a). The molar absorptivity (?) of poly(1b) at ∼700 nm increased with increasing applied voltage in the UV-vis spectrum.     

Highly active and trans-1,4 specific polymerization of 1,3-butadiene catalyzed by 2-pyrazolyl substituted 1,10-phenanthroline ligated iron (II) complexes

A new family of iron (II) complexes (2a–h) bearing tridentate 2-pyrazolyl substituted 1,10-phenanthroline ligands were successfully prepared and characterized by IR spectroscopy, elemental analysis, and mass spectra. Complexes 2a–f and 2h were further confirmed by the X-ray crystallographic analysis. 2a, 2b, 2e, and 2f adopted distorted trigonal bipyramidal configuration. 2c displayed a distorted octahedron formed by six coordinated nitrogen atoms of the two ligands. Linked by two bridged chloride atoms, complex 2d was a centrosymmetric dimmer, and complex 2h adopted a six-coordinate distorted octahedral geometry due to the coordination of two solvent molecules. These complexes activated by alkylaluminum were examined in butadiene polymerization. In combination with AlⁱBu₃, complexes 2a–c exhibited high catalytic activity (73.5%–94.3%) at 20 °C, whereas other complexes exhibited much lower activity. Interestingly, the activity and selectivity of the complexes increased as increasing polymerization temperature. In particular, 2b and 2c displayed both high activity (99% and 80%, respectively) and trans-1,4 selectivity (95.6% and 96.2%, respectively) at 60 °C. The trans-1,4 selectivity of 2b varied as alkylaluminum used as a cocatalyst, in the following order: AlⁱBu₃ > AlOct₃ > AlEt₃ > AlMe₃, whereas much lower trans-1,4 selectivity was observed in the cases of using MAO and MMAO.     

Synthesis of novel poly(diphenylacetylene)s with both trimethylsilyl and alkyl groups: The effect of desilylation on gas permeability

Diphenylacetylenes having both a trimethylsilyl group and an alkyl group at para positions [Me₃SiC₆H₄CCC₆H₄R; R = Et (1a), n-Bu (1b), t-Bu (1c), n-C₈H₁₇ (1d)] and having only an alkyl group [PhCCC₆H₄R; R = n-Bu (1B), n-C₈H₁₇ (1D)] were synthesized and then polymerized with TaCl₅/n-Bu₄Sn catalyst to provide the corresponding poly(diphenylacetylene)s (2a, 2b, 2c, 2d, 2B, and 2D). The formed polymers except 2c afforded tough free-standing membranes by casting from toluene solutions. Desilylation reaction of the Si-containing polymer membranes (2a, 2b, 2d) was carried out with trifluoroacetic acid, and the desilylated polymer membranes (3a, 3b, 3d) were obtained. The permeability to O₂, N₂, and CO₂ were determined for the obtained polymer membranes. All the desilylated membranes showed lower gas permeability than the Si-containing counterparts. To clarify the effects of the desilylation further, CO₂ diffusivity, CO₂ solubility, and fractional free volume (FFV) of the polymer membranes were investigated. The FFV and CO₂ diffusivity decreased upon desilylation, while CO₂ solubility hardly varied.     

Synthesis of poly(1-β-naphthyl-2-phenylacetylene) membranes through desilylation and their properties

The polymerization of 1-β-naphthyl-2-[(p-trimethylsilyl)phenyl]acetylene (8a) with TaCl₅-n-Bu₄Sn in cyclohexane provided a high molecular weight polymer (9a) (M_w=3.4×10⁶). The corresponding monomers having p-dimethyl-t-butylsilyl and p-dimethyl(10-pinanyl)silyl groups in place of p-trimethylsilyl group in 8a also polymerized in a similar way to give high molecular weight polymers (9b, 9c, respectively; M_w>1×10⁶). All these polymers were soluble in many common solvents such as toluene and chloroform, and provided free-standing membranes by casting from toluene solution. The oxygen permeability coefficients (P_O2) of 9a at 25 °C was as high as 3500 barrers. The membrane of poly(1-β-naphthyl-2-phenylacetylene) (10a) was prepared by desilylation of the membrane of 9a with trifluoroacetic acid. Polymer 10a was insoluble in any solvents, and showed high thermal stability (the onset temperature of weight loss in air ∼470 °C). The P_O2 value of 10a reached 4300 barrers. Not only the membrane of 9c but also its desilylation product 10c exhibited large optical rotations ([α]_D=+2924 and +9800°, respectively) and strong CD signals. This indicates that the membrane of 10c maintains the helical main chain conformation of 9c with a large excess one-handed helix sense.     

Synthesis and gas permeability of ester substituted poly(p-phenylene)s

Polymerizations of various ester substituted 2,5-dichlorobenzoates [substituent: linear alkyl groups (1a-f), branched alkyl groups (1g-l), cyclohexyl groups (1m-o), phenyl groups (1p-r), and oxyethylene units (1s-v)] were investigated with Ni-catalyzed/Zn-mediated system in 1-methyl-2-pyrrolidone (NMP) at 80 °C. Most of monomers bearing linear and branched alkyl groups successfully polymerized to give relatively high-molecular-weight polymers (M_n = 10,000-20,800). However, the molecular weight of the polymer having eicocyl groups was low because of steric hindrance of long alkyl chain. The polymerizations of cyclohexyl 2,5-dichlorobenzoate and phenyl 2,5-dichlorobenzoate produced low-molecular-weight polymers, while the polymerizations of monomers with alkyl cyclohexyl and alkyl phenyl groups proceeded to afford polymers with relatively high-molecular-weights. The polymers possessing oxyethylene units were obtained, but the molecular weights were low when the oxyethylene chains were long. The gas permeability of membranes of poly(p-phenylene)s with alkyl chains increased as increasing the length of alkyl chain. The membranes of poly(p-phenylene)s with phenyl groups and oxyethylene units exhibited high densities and relatively low gas permeability. However, the CO₂/N₂ separation factor of membrane of poly(p-phenylene) having oxyethylene units was as large as 73.6.     

Syndiotactically enriched 1,2-selective polymerization of 1,3-butadiene initiated by iron catalysts based on a new class of donors

A series of phosphoryl (PO) contained compounds: triethylphosphate (a), diethylphenylphosphate (b), ethyldiphenylphosphate (c) triarylphosphates (d and h-m), triphenylphosphine oxide (e), phenyl diphenylphosphinate (f) and diphenyl phenylphosphonate (g) have been prepared. Iron catalysts, which are generated in situ by mixing the compounds with Fe(2-EHA)₃ and AlⁱBu₃ in hexane, are tested for butadiene polymerization at 50 °C. Phosphates donated catalysts have been, unprecedently, found to conduct extremely high syndiotactically (pentad, rrrr = 46.1-94.5%) enriched 1,2-selective (1,2-structure content = 56.2-94.3%) polymerization of butadiene. Introduction of electron withdrawing substituents on phenyl rings oftriphenylphosphate (k-m) remarkably promotes catalytic activity, while bulky substituent isopropyl at 2-position (h) has beneficial influence on regioselectivity. Employment of e, f or g as donor, results in a suppressed monomer conversion, accompanied by deteriorated 1,2-regioselectivity. The effects of polymerization conditions such as reaction temperature, types of cocatalysts and polymerization medium are also investigated by using catalyst system with tri(2,4-difluorophenyl)phosphate (m) as donor. Highly tolerance to polymerization temperature up to 80 °C is observed for the first time in the iron-based catalyst.     

Synthesis and properties of cyclopentadithiophene-based poly(silarylenesiloxane) derivatives

Poly(silarylenesiloxane) derivatives with 4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene moiety, bearing dimethyl- (P1), methylphenyl- (P2) and diphenyl- (P3) substituents on silyl moieties, were prepared via polycondensation of the corresponding disilanol monomers, that is, 2,6-bis(dimethylhydroxysilyl)-4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene (M1), 2,6-bis(methylphenylhydroxysilyl)-4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene (M2), and 2,6-bis(diphenylhydroxysilyl)-4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene (M3), respectively. P1-P3 exhibited the good solubility in common organic solvents, such as benzene, toluene, chloroform, dichloromethane, THF, and so on. The glass transition temperatures (T_gs) of P1, P2 and P3 were determined by differential scanning calorimetry to be 56, 97 and 137 °C, respectively, depending on the substituent on the silyl moieties. No melting temperatures (T_ms) of P1, P2 and P3 were observed, suggesting the obtained P1-P3 are amorphous polymers. The temperatures at 5% weight loss (T_d5s) of P1, P2 and P3 were 460, 459 and 479 °C, respectively, indicating that the larger number of phenyl group on the silyl moieties resulted in the better thermostability. Bathochromic and hyperchromic effects were observed in the absorption and fluorescence spectra by introducing silyl substituents onto 4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene moiety. In addition, the bathochromic shift of the maximum absorption (λ_abs) and the increase in the fluorescence quantum yield (Φ_F) were observed by the introduction of phenyl group onto the silyl moieties.     

Anodic carbon-boron bond cleavage through the intermediacy of electrogenerated bromonium ion

The electrochemical properties of a series of cyclic arylboronic esters, XC₆H₄B(OR)₂ [RR = CH₂CH₂; X = H (1a); p-Me (1b); p-OMe (1c); p-Cl (1d); p-Ph (1e); m-Cl (1f); m-OMe (1g); CF₃ (1h); OMe (1i); 2,6-dimethyl (1j); 1b with RR = (CH₂)₃, (1k); 1b with RR = CMe₂CMe₂, (1m)] has been studied in acetonitrile by cyclic voltammetry (CV) and controlled-potential electrolysis (CPE). The CV of representative examples of aryl borates with different substituents show one irreversible oxidation wave on a Pt cathode, at 1.8-1.9 V (vs. Ag/AgCl), with a negligible substituent effect. The cathodic CPE process led to small amounts of biaryls only, whereas the direct anodic CPE could not be carried out practically due to low currents. However, in the presence of electrogenerated bromonium (or iodonium) ions a C-B bond cleavage does take place to yield the corresponding bromoaryls, brominated phenols, and arylboronic acids as the major products.     

Electrochemical study of stable N-alkoxyarylaminyl radicals

The electrochemical study of N-tert-butoxy-2,4-diphenyl-6-tert-butylphenylaminyl (1a), N-tert-butoxy-2,4-bis(4-chlorophenyl)-6-tert-butylphenylaminyl (1b), N-[2-(methoxycarbonyl)-2-propyl]-2,4-diphenyl-6-tert-butylphenylaminyl (2), and N-tert-butoxy-2,4,6-tris(4-chlorophenyl)phenylaminyl radicals (3) was performed by cyclic voltammetry using acetonitrile as the solvent and Bu₄NPF₆ as the supporting electrolyte. On cathodic scan (100 mV/s), all the radicals gave chemically reversible cyclic voltammograms, and the were determined to be −1.405 V (1a), −1.310 V (2a), −1.282 V (2b), and −1.195 V (3) (versus Fc⁺/Fc), respectively. On anodic scan (100 mV/s), on the other hand, 1a, 1b and 2 showed chemically reversible cyclic voltammograms, but 3 exhibited a partially reversible couple even on a scan rate of 500 mV/s, indicating that the cation species of 3 was less stable. The determined for 1a, 1b, 2 and 3 were 0.220, 0.280, 0.318 and 0.294 V (versus Fc⁺/Fc), respectively. The electrochemical data were compared with those of thioaminyl radicals, the corresponding sulfur analogues of 1-3.     

Effects of internal linkage groups of fluorinated diamine on the optical and dielectric properties of polyimide thin films

To investigate the difference of the trifluoromethyl (CF₃) group and ether group affecting the optical property of fluorinated polyimides (PIs), we prepared 4,4′-bis(4-amino-2-trifluoromethylphenoxy)diphenyl ether (4) with three ether groups and 2,2-bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]hexafluoropropane (5) with four CF₃ groups with 2-chloro-5-nitrobenzotrifluoride and 4,4′-dihydroxydiphenyl ether or 2,2-bis(4-hydroxyphenol)hexafluoropropane. Two series of organosoluble and light-colored PIs (4a-4c, 5a-5c) were synthesized from 4 and 5 with various aromatic dianhydrides: 3,3,4,4-benzophenonetetracarboxylic dianhydride (BTDA) (a), 4,4-oxydiphthalic anhydride (ODPA) (b), and 4,4-hexafluoroisopropylidenediphthalic anhydride (6FDA) (c), prepared through a typical two-step polymerization method. These PIs were soluble in amide polar solvents and even in less polar solvents. The glass-transition temperatures (T_g) of 4a-5c were 221-249 °C and the 10% weight-loss temperatures were above 530 °C. Their films had cutoff wavelengths between 339 and 399 nm and yellowness index ranges from 1.95 to 42.60. The dielectric constants estimated from the average refractive indices are 2.59-2.93 (1 MHz). In a comparison of the PI series based on 4, 5, and 4,4′-bis(4-amino-2-trifluoromethylphenoxy)biphenyl (6), we found that the CF₃ group and ether group on the diamine had almost same effect in lowering the color, but the ether group had better thermal stability. The color intensity of the three PI series was lowered in the following order: 6 > 4 > 5. The PI 5c, synthesized from diamine 5 and dianhydride c, had six CF₃ groups in a repeated segment and ether group at the same time, so it exhibited the lightest color among the three series.     

Electrooxidation of 4-methylcatechol in the presence of barbituric acid derivatives

Electrooxidation of 4-methylcatechol (1) in the presence of 1,3-dimethylbarbituric acid (2a) and 1,3-diethylthiobarbituric acid (2b) as nucleophiles has been studied in detail by cyclic voltammetry and controlled-potential coulometry. The results indicate that 1 can be oxidized to its related o-benzoquinone (1a) and without conversion to its quinone methide tautomeric form, via an ECEC mechanism pathway, is converted to barbiturate derivatives (5a-b). The electrochemical synthesis of 5a-b have been successfully performed in one-pot in an undivided cell.     

Mechanistic study of electrochemical oxidation of catechols in the presence of 4-hydroxy-1-methyl-2(1H)-quinolone: Application to the electrochemical synthesis

Electrochemical oxidation of catechols (1a-1c) has been studied in the presence of 4-hydroxy-1-methyl-2(1H)-quinolone (3) as a nucleophile in aqueous solution using cyclic voltammetry and controlled-potential coulometry. The results indicate that the quinones derived from catechols (1a-1c) participate in Michael addition reactions with 3 to form the corresponding benzofuran (or isochromeno[4,3-c]quinoline) derivatives (6a-6c). The electrochemical synthesis of (6a-6c) has been successfully performed in an undivided cell in good yield and purity. The oxidation mechanism was deduced from voltammetric data and by coulometry at controlled-potential. The products have been characterized after purification by IR, ¹H NMR, ¹³C NMR and MS.     

Synthesis, characterization, and high gas permeability of poly(diarylacetylene)s having fluorenyl groups

Diarylacetylenes having fluorenyl groups and other substituents (trimethylsilyl, t-butyl, bromine, fluorine) (1a-1) were polymerized with TaCl₅-n-Bu₄Sn. Monomers 1a-l produced high molecular weight polymers 2a-l (M_w 5.1 × 10⁵-1.3 × 10⁶) in 12-59% yields. All of the polymers were soluble in common organic solvents, and gave tough free-standing membranes by the solution casting method. The onset temperatures of weight loss of polymers 2a-l in air were over 400 °C, indicating considerably high thermal stability. All the polymer membranes showed high gas permeability; e.g., the oxygen permeability coefficient (PO₂) of 2a was as large as 4800 barrers. Membrane 2d possessing two fluorine atoms at meta and para positions of the phenyl ring showed the highest oxygen permeability (PO₂ = 6600 barrers) among the present polymers.     

A new facile electrochemical method for the synthesis of 4-(pyridine-2-ylthio)benzene-l,2-diols

Electrochemical oxidation of catechols (1a-1c) has been studied in the presence of 2-mercaptopyridine (3) as a nucleophile in water solution using cyclic voltammetry and controlled-potential coulometry. The results revealed that the quinones derived from catechols (1a-1c) participate in Michael addition reaction with 2-mercaptopyridine (3) and converted to the corresponding (pyridine-2-ylthio)benzene-l,2-diol derivatives (4a-4c), via an EC mechanistic pathway. The electrochemical synthesis of compounds 4a-4c has been successfully performed at a carbon rod electrode and in an undivided cell with good yields and high purity.     

Pd-catalyzed hydrosilylation polymerization of a dihydrosilane with diyne/triyne mixed systems affording crosslinked silylene-divinylene polymers and their properties

Treatment of a dihydrosilane (methylphenylsilane, 1) with mixtures of a diyne (p- or m-diethynylbenzene, 2a or 2b) and a triyne (1,3,5-triethynylbenzene, 3a or B,B′,B″-triethynyl-N,N′,N″-trimethylborazine, 3b; 1:2:3=100:95:5, 100:90:10, 100:80:20) in the presence of Pd-PCy₃ (Cy=cyclohexyl) catalyst gave new crosslinked silylenedivinylene polycarbosilanes. In TGA the resulting crosslinked polymers tended to show higher Td₅ values and higher char yields than the corresponding linear polymers. On the other hand, UV/vis absorption spectra of the crosslinked polymers obtained in the reactions of 2a or 2b with 3a exhibited increased broad peaks around 390 nm for 2a or 360 nm for 2b. Coincidently, their fluorescence spectra showed significant increase of the emission peaks in 400-550 nm. The crosslinked polymer derived from 2a and 3b, however, showed decrease of the absorption peak around 390 nm and profound depression of fluorescence peaks in 400-550 nm.     

A facile galvanostatic method for the synthesis of quinoxalinediones

Electrochemical oxidation of catechols (1a-d) has been studied in the presence of N,N-dimethylethylendiamine (3) as a nucleophile in aqueous solutions, using cyclic voltammetry, constant-current coulometry and controlled-potential coulometry. The results indicate that the quinones derived from catechols (2a-d) participate in Michael addition reactions with N,N′-dimethylethylendiamine (3) via the ECECE mechanism to form the corresponding quinoxalinedione derivatives (6a-c).