Synthesis of novel poly(diphenylacetylene)s with both trimethylsilyl and alkyl groups: The effect of desilylation on gas permeability

Diphenylacetylenes having both a trimethylsilyl group and an alkyl group at para positions [Me₃SiC₆H₄CCC₆H₄R; R = Et (1a), n-Bu (1b), t-Bu (1c), n-C₈H₁₇ (1d)] and having only an alkyl group [PhCCC₆H₄R; R = n-Bu (1B), n-C₈H₁₇ (1D)] were synthesized and then polymerized with TaCl₅/n-Bu₄Sn catalyst to provide the corresponding poly(diphenylacetylene)s (2a, 2b, 2c, 2d, 2B, and 2D). The formed polymers except 2c afforded tough free-standing membranes by casting from toluene solutions. Desilylation reaction of the Si-containing polymer membranes (2a, 2b, 2d) was carried out with trifluoroacetic acid, and the desilylated polymer membranes (3a, 3b, 3d) were obtained. The permeability to O₂, N₂, and CO₂ were determined for the obtained polymer membranes. All the desilylated membranes showed lower gas permeability than the Si-containing counterparts. To clarify the effects of the desilylation further, CO₂ diffusivity, CO₂ solubility, and fractional free volume (FFV) of the polymer membranes were investigated. The FFV and CO₂ diffusivity decreased upon desilylation, while CO₂ solubility hardly varied.     

Synthesis and gas permeation properties of various Si-containing poly(diarylacetylene)s and their desilylated membranes

Diarylacetylene monomers having trimethylsilyl groups and other substituents (substituted biphenyl, 1a and 1b; trimethylsilylmethylphenyl, 1c-e) were synthesized and polymerized with TaCl₅-n-Bu₄Sn catalyst to produce the corresponding poly(diarylacetylene)s (2a-d). Polymers 2a-c had high molecular weights and were soluble in common organic solvents. Free-standing membranes of 2a-c as well as previously reported 2f-h were prepared by the solution-casting method. Desilylation of these Si-containing polymer membranes was carried out with trifluoroacetic acid to afford 3a, 3b, and 3f-h. Upon desilylation, biphenyl-containing membranes became less permeable (3a, b), whereas fluorene-containing membranes became more permeable (3f-h). In particular, 3h exhibited extremely high gas permeability (PO₂ = 9800 barrers), which is about the same as that of poly(1-trimethylsilyl-1-propyne). Desilylated membranes 3a and 3f-h showed different gas permeability from that of polymers 2i-k which have the identical chemical structures and obtained directly by the polymerization of the corresponding monomers.     

Synthesis, characterization, and high gas permeability of poly(diarylacetylene)s having fluorenyl groups

Diarylacetylenes having fluorenyl groups and other substituents (trimethylsilyl, t-butyl, bromine, fluorine) (1a-1) were polymerized with TaCl₅-n-Bu₄Sn. Monomers 1a-l produced high molecular weight polymers 2a-l (M_w 5.1 × 10⁵-1.3 × 10⁶) in 12-59% yields. All of the polymers were soluble in common organic solvents, and gave tough free-standing membranes by the solution casting method. The onset temperatures of weight loss of polymers 2a-l in air were over 400 °C, indicating considerably high thermal stability. All the polymer membranes showed high gas permeability; e.g., the oxygen permeability coefficient (PO₂) of 2a was as large as 4800 barrers. Membrane 2d possessing two fluorine atoms at meta and para positions of the phenyl ring showed the highest oxygen permeability (PO₂ = 6600 barrers) among the present polymers.     

Synthesis of poly(1-β-naphthyl-2-phenylacetylene) membranes through desilylation and their properties

The polymerization of 1-β-naphthyl-2-[(p-trimethylsilyl)phenyl]acetylene (8a) with TaCl₅-n-Bu₄Sn in cyclohexane provided a high molecular weight polymer (9a) (M_w=3.4×10⁶). The corresponding monomers having p-dimethyl-t-butylsilyl and p-dimethyl(10-pinanyl)silyl groups in place of p-trimethylsilyl group in 8a also polymerized in a similar way to give high molecular weight polymers (9b, 9c, respectively; M_w>1×10⁶). All these polymers were soluble in many common solvents such as toluene and chloroform, and provided free-standing membranes by casting from toluene solution. The oxygen permeability coefficients (P_O2) of 9a at 25 °C was as high as 3500 barrers. The membrane of poly(1-β-naphthyl-2-phenylacetylene) (10a) was prepared by desilylation of the membrane of 9a with trifluoroacetic acid. Polymer 10a was insoluble in any solvents, and showed high thermal stability (the onset temperature of weight loss in air ∼470 °C). The P_O2 value of 10a reached 4300 barrers. Not only the membrane of 9c but also its desilylation product 10c exhibited large optical rotations ([α]_D=+2924 and +9800°, respectively) and strong CD signals. This indicates that the membrane of 10c maintains the helical main chain conformation of 9c with a large excess one-handed helix sense.     

Synthesis and gas permeability of ester substituted poly(p-phenylene)s

Polymerizations of various ester substituted 2,5-dichlorobenzoates [substituent: linear alkyl groups (1a-f), branched alkyl groups (1g-l), cyclohexyl groups (1m-o), phenyl groups (1p-r), and oxyethylene units (1s-v)] were investigated with Ni-catalyzed/Zn-mediated system in 1-methyl-2-pyrrolidone (NMP) at 80 °C. Most of monomers bearing linear and branched alkyl groups successfully polymerized to give relatively high-molecular-weight polymers (M_n = 10,000-20,800). However, the molecular weight of the polymer having eicocyl groups was low because of steric hindrance of long alkyl chain. The polymerizations of cyclohexyl 2,5-dichlorobenzoate and phenyl 2,5-dichlorobenzoate produced low-molecular-weight polymers, while the polymerizations of monomers with alkyl cyclohexyl and alkyl phenyl groups proceeded to afford polymers with relatively high-molecular-weights. The polymers possessing oxyethylene units were obtained, but the molecular weights were low when the oxyethylene chains were long. The gas permeability of membranes of poly(p-phenylene)s with alkyl chains increased as increasing the length of alkyl chain. The membranes of poly(p-phenylene)s with phenyl groups and oxyethylene units exhibited high densities and relatively low gas permeability. However, the CO₂/N₂ separation factor of membrane of poly(p-phenylene) having oxyethylene units was as large as 73.6.     

Synthesis and gas permeability of new polynorbornene dicarboximide with fluorine pendant groups

The new exo-N-3,5-bis(trifluoromethyl)phenyl-7-oxanorbornene-5,6-dicarboximide (TFmPhONDI, 2), was synthesized and polymerized via ring opening metathesis polymerization (ROMP) using tricyclohexylphosphine [1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazolilydene][benzylidene] ruthenium dichloride (I) to produce the corresponding PTFmPhONDI (3). Gas permeability, diffusion and solubility coefficients of PTFmPhONDI (3) were determined by transient permeation for five gases He, CO₂, O₂, N₂ and CH₄. The larger gas permeability and diffusion coefficients of 3 compared to polynorbornene dicarboximides without fluorine pendant groups were attributed to a lower polymer chain packing due to the effect of the CF₃ groups in the lateral phenyl moiety pending at positions 3 and 5.     

Synthesis and properties of various poly(diphenylacetylenes) containing tert-amine moieties

The polymerization of diphenylacetylene derivatives possessing tert-amine moieties, such as triphenylamine, N-substituted carbazole and indole, was examined in the presence of TaCl₅-n-Bu₄Sn (1:2) catalyst. A polymer with high molecular weight (M_w = 570 × 10³) was obtained in good yield by the polymerization of diphenylamine-containing monomer 1b, whereas the isopropylphenylamine derivative (1c) gave a polymer with relatively low molecular weight (M_w = 2.4 × 10³). The polymerization of monomer 1d containing cyclohexylphenylamine group did not proceed; however, carbazolyl- and indolyl-containing monomers also produced polymers. Poly(1b), poly(2f) and poly(4b) could be fabricated into free-standing membranes by casting toluene solutions of these polymers. The gas permeability of poly(1b) was too low to be evaluated accurately whereas poly(4b) possessing two chlorine atoms in the repeating unit showed higher gas permeability than that of poly(1b); furthermore, poly(2f) having trimethylsilyl and 3-methylindolyl groups exhibited relatively high gas permeability (). In the cyclic voltammograms of diphenylamino group-containing polymers, poly(1b) and poly(2b), the intensities of oxidation and reduction peaks decreased more than those of carbazolyl-containing poly(2a). The molar absorptivity (?) of poly(1b) at ∼700 nm increased with increasing applied voltage in the UV-vis spectrum.     

A facile galvanostatic method for the synthesis of quinoxalinediones

Electrochemical oxidation of catechols (1a-d) has been studied in the presence of N,N-dimethylethylendiamine (3) as a nucleophile in aqueous solutions, using cyclic voltammetry, constant-current coulometry and controlled-potential coulometry. The results indicate that the quinones derived from catechols (2a-d) participate in Michael addition reactions with N,N′-dimethylethylendiamine (3) via the ECECE mechanism to form the corresponding quinoxalinedione derivatives (6a-c).     

Highly active and trans-1,4 specific polymerization of 1,3-butadiene catalyzed by 2-pyrazolyl substituted 1,10-phenanthroline ligated iron (II) complexes

A new family of iron (II) complexes (2a–h) bearing tridentate 2-pyrazolyl substituted 1,10-phenanthroline ligands were successfully prepared and characterized by IR spectroscopy, elemental analysis, and mass spectra. Complexes 2a–f and 2h were further confirmed by the X-ray crystallographic analysis. 2a, 2b, 2e, and 2f adopted distorted trigonal bipyramidal configuration. 2c displayed a distorted octahedron formed by six coordinated nitrogen atoms of the two ligands. Linked by two bridged chloride atoms, complex 2d was a centrosymmetric dimmer, and complex 2h adopted a six-coordinate distorted octahedral geometry due to the coordination of two solvent molecules. These complexes activated by alkylaluminum were examined in butadiene polymerization. In combination with AlⁱBu₃, complexes 2a–c exhibited high catalytic activity (73.5%–94.3%) at 20 °C, whereas other complexes exhibited much lower activity. Interestingly, the activity and selectivity of the complexes increased as increasing polymerization temperature. In particular, 2b and 2c displayed both high activity (99% and 80%, respectively) and trans-1,4 selectivity (95.6% and 96.2%, respectively) at 60 °C. The trans-1,4 selectivity of 2b varied as alkylaluminum used as a cocatalyst, in the following order: AlⁱBu₃ > AlOct₃ > AlEt₃ > AlMe₃, whereas much lower trans-1,4 selectivity was observed in the cases of using MAO and MMAO.     

Pd-catalyzed hydrosilylation polymerization of a dihydrosilane with diyne/triyne mixed systems affording crosslinked silylene-divinylene polymers and their properties

Treatment of a dihydrosilane (methylphenylsilane, 1) with mixtures of a diyne (p- or m-diethynylbenzene, 2a or 2b) and a triyne (1,3,5-triethynylbenzene, 3a or B,B′,B″-triethynyl-N,N′,N″-trimethylborazine, 3b; 1:2:3=100:95:5, 100:90:10, 100:80:20) in the presence of Pd-PCy₃ (Cy=cyclohexyl) catalyst gave new crosslinked silylenedivinylene polycarbosilanes. In TGA the resulting crosslinked polymers tended to show higher Td₅ values and higher char yields than the corresponding linear polymers. On the other hand, UV/vis absorption spectra of the crosslinked polymers obtained in the reactions of 2a or 2b with 3a exhibited increased broad peaks around 390 nm for 2a or 360 nm for 2b. Coincidently, their fluorescence spectra showed significant increase of the emission peaks in 400-550 nm. The crosslinked polymer derived from 2a and 3b, however, showed decrease of the absorption peak around 390 nm and profound depression of fluorescence peaks in 400-550 nm.     

Tyrosine-based poly(m-phenyleneethynylene-p-phenyleneethynylene)s. Helix folding and responsiveness to a base

The Sonogashira-Hagihara polymerization of 3′,5′-diiodo-N-α-tert-butoxycarbonyl-l-tyrosine methyl ester (1) and 3′,5′-diiodo-N-α-tert-butoxycarbonyl-O-methyl-l-tyrosine methyl ester (2) with para-diethynylbenzene (3) was carried out to obtain optically active poly(m-phenyleneethynylene-p-phenyleneethynylene)s [poly(1) and poly(2)] with M_n’s ranging from 9900 to 15,000 in 80-87% yields. Poly(1) exhibited intense CD signals in DMSO and THF, but did not in CH₂Cl₂, indicating that it took a predominantly one-handed helical conformation in the former two solvents. On the other hand, there was no evidence for poly(2) to take a helical structure in these solvents. Poly(1) turned the CD sign at 390 nm from plus to minus in DMSO/H₂O = 9/1 (v/v) by the addition of NaOH. Alkaline hydrolysis of ester moieties of poly(1) and poly(2) gave the corresponding polymers having carboxy groups [poly(1a) and poly(2a)]. Poly(1a) and poly(2a) increased the CD intensity by the addition of NaOH.     

Performance improvement of polybenzoxazine by alloying with polyimide: effect of preparation method on the properties

Polymer alloys of polyimide and polybenzoxazine were prepared from the combination of a bifunctional benzoxazine monomer, 6,6′-(1-methylethylidene)bis(3,4-dihydro-3-2H-1,3-benzoxazine) (B-a) and a soluble polyimide (PI) or its precursor, poly(amide acid) (PAA), that was synthesized from oxydianiline (ODA) and bisphenol A di(phthalic anhydride) ether (BPADA). It was observed from DSC that the onset temperature for the curing exotherm of B-a in the blend with PAA was remarkably lowered compared with that of pristine B-a, while the curing temperature of B-a in the blend with PI was almost the same as that of pristine B-a. The cast films of PI/B-a or PAA/B-a were thermally treated at 150, 200 and 240 °C for 2 h each, affording deep wine, transparent films. The PI component in the polymer alloy films from PI/B-a dissolved thoroughly. On the other hand, the polymer alloy films from PAA/B-a were not soluble at all in NMP. The polymer alloy films from both PI/B-a and PAA/B-a showed only one glass transition temperature (T_g) from their viscoelastic analyses. The T_g values remarkably increased as the content of PI increased. The thermal stabilities of both films from PI/B-a and PAA/B-a increased as the PI component increased in the similar manner.     

Paired electrochemical synthesis of new organosulfone derivatives

Electrochemical oxidation of “cathodically generated 4-aminocatechol (2)” has been studied in the presence of 4-toluenesulfinic acid (4a) and benzenesulfinic acid (4b) as nucleophiles in aqueous solutions, using cyclic voltammetry and controlled-potential coulometry. The results indicate that the o-benzoquinone derived from 4-aminocatechol (2) participates in Michael addition reaction with 4a or 4b to form the corresponding new organosulfone derivatives (5a and 5b). In this work we have proposed a mechanism for the electrode process. A Fe(CN)₆³⁻/Fe(CN)₆⁴⁻ redox mediator was used for the anodic oxidation of 4-aminocatechol (2) to the corresponding o-quinone 3. The indirect electrochemical process consists of a multi-step such as (a) cathodic reduction of 4-nitrocatechol (1) to 4-aminocatechol (2), (b) chemical oxidation of 4-aminocatechol (2) to 4-aminoquinone (3) with the resulting Fe(CN)₆³⁻, (c) the chemical reaction of 4-aminoquinone (3) with 4-toluenesulfinic acid (4a) or benzenesulfinic acid (4b), and (d) the anodic regeneration of Fe(CN)₆³⁻. The paired electrochemical synthesis of organosulfone derivatives (5a and 5b) has been successfully performed in an one-pot process at carbon rod electrode as a working and platinum as a counter electrode in an undivided cell.     

Synthesis of 6-(4-diethylamino)phenyl-2-oxo-2H-pyran-3-carbonitorile derivatives and their fluorescence in solid state and in solutions

One-pot synthesis of a new 2-pyrone dye (3a) by the reaction of 4-diethylamino-acetophenone (1) with methyl 2-cyano-3,3-bis(methylsulfanyl)acrylate (2) in the presence of sodium hydroxide as the base was carried out in DMSO. Compound 4a was synthesized by the replacement of methylsulfanyl group of 3a with dimethylamine at 4-position of pyrone ring. Similarly, compound 5a was prepared via the reaction of 3a with diethyl malonate. Compounds 3a-5a exhibited the following fluorescence in the solid state: red (3a), green (4a), and orange (5a). In addition, it was revealed that 2-pyrone dyes exhibit fluorescence in various solvents and show positive solvatochromism. Compounds 3a and 5a exhibited intense fluorescence in chloroform and dichloromethane (fluorescence quantum yield Φ: 0.94-0.95). In contrast, compound 4a exhibited intense fluorescence in polar solvents (methanol: Φ = 0.92). These 2-pyrone dyes have the potential for applications in various fields.     

Electrochemical characterisation of tetra- and octa-substituted oxo(phthalocyaninato)titanium(IV) complexes

The synthesis and electrochemical characterisation of the following oxotitanium tetra-substituted phthalocyanines are reported: 1,(4)-(tetrabenzyloxyphthalocyaninato)titanium(IV) oxide (5a); 1,(4)-{tetrakis[4-(benzyloxy)phenoxy]phthalocyaninato}titanium(IV) oxide (5b); 2,(3)-(tetrabenzyloxyphthalocyaninato)titanium(IV) oxide (6a) and 2,(3)-{tetrakis[4-(benzyloxy)phenoxy]phthalocyaninato}titanium(IV) oxide (6b). The electrochemical characterisation of complexes octa-substituted with 4-(benzyloxy)phenoxy (9b), phenoxy (9c) and tert-butylphenoxy (9d) groups is also reported. The cyclic voltammograms of the complexes exhibit reversible couples I-III and couple IV is quasi-reversible for complexes 5a, 5b, 6a and 6b. The first two reductions are metal-based processes, confirmed by spectroelectrochemistry to be due to Ti^IVPc²⁻/Ti^IIIPc²⁻ and Ti^IIIPc²⁻/Ti^IIPc²⁻ redox processes and the last two reductions are ring-based processes due to Ti^IIPc²⁻/Ti^IIPc³⁻ and Ti^IIPc³⁻/Ti^IIPc⁴⁻. Chronocoulometry confirmed a one-electron transfer at each reduction step. The electrochemistry of the above complexes is also compared to the previously reported 5c, 5d, 6c and 6d.     

Electrochemical study of stable N-alkoxyarylaminyl radicals

The electrochemical study of N-tert-butoxy-2,4-diphenyl-6-tert-butylphenylaminyl (1a), N-tert-butoxy-2,4-bis(4-chlorophenyl)-6-tert-butylphenylaminyl (1b), N-[2-(methoxycarbonyl)-2-propyl]-2,4-diphenyl-6-tert-butylphenylaminyl (2), and N-tert-butoxy-2,4,6-tris(4-chlorophenyl)phenylaminyl radicals (3) was performed by cyclic voltammetry using acetonitrile as the solvent and Bu₄NPF₆ as the supporting electrolyte. On cathodic scan (100 mV/s), all the radicals gave chemically reversible cyclic voltammograms, and the were determined to be −1.405 V (1a), −1.310 V (2a), −1.282 V (2b), and −1.195 V (3) (versus Fc⁺/Fc), respectively. On anodic scan (100 mV/s), on the other hand, 1a, 1b and 2 showed chemically reversible cyclic voltammograms, but 3 exhibited a partially reversible couple even on a scan rate of 500 mV/s, indicating that the cation species of 3 was less stable. The determined for 1a, 1b, 2 and 3 were 0.220, 0.280, 0.318 and 0.294 V (versus Fc⁺/Fc), respectively. The electrochemical data were compared with those of thioaminyl radicals, the corresponding sulfur analogues of 1-3.     

Anodic carbon-boron bond cleavage through the intermediacy of electrogenerated bromonium ion

The electrochemical properties of a series of cyclic arylboronic esters, XC₆H₄B(OR)₂ [RR = CH₂CH₂; X = H (1a); p-Me (1b); p-OMe (1c); p-Cl (1d); p-Ph (1e); m-Cl (1f); m-OMe (1g); CF₃ (1h); OMe (1i); 2,6-dimethyl (1j); 1b with RR = (CH₂)₃, (1k); 1b with RR = CMe₂CMe₂, (1m)] has been studied in acetonitrile by cyclic voltammetry (CV) and controlled-potential electrolysis (CPE). The CV of representative examples of aryl borates with different substituents show one irreversible oxidation wave on a Pt cathode, at 1.8-1.9 V (vs. Ag/AgCl), with a negligible substituent effect. The cathodic CPE process led to small amounts of biaryls only, whereas the direct anodic CPE could not be carried out practically due to low currents. However, in the presence of electrogenerated bromonium (or iodonium) ions a C-B bond cleavage does take place to yield the corresponding bromoaryls, brominated phenols, and arylboronic acids as the major products.