Synthesis of Pt nanoparticles functionalized WO3 nanorods and their gas sensing properties

A novel sensor material of Pt nanoparticles (NPs) functionalized WO₃ hybrid nanorods was fabricated via a one-pot method. The obtained Pt NPs decorated WO₃ nanorods (Pt-WO₃) were analyzed by means of X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and X-ray photoelectron spectroscopy (XPS). A comparative gas sensing study was carried out on both the Pt NPs decorated and undecorated WO₃ nanorods in order to investigate the influence of Pt NPs on the gas sensing performances. Obtained results showed that the Pt-WO₃ sensor exhibited fast response and recovery as well as high sensitivity compared with the undecorated sensor. The improved sensing properties were attributed to the spillover effect of Pt NPs and the electronic metal-support interaction.     

A selective room temperature formaldehyde gas sensor using TiO2 nanotube arrays

A new gas sensor using TiO₂ nanotube arrays was fabricated and explored for formaldehyde detection at room temperature. Highly ordered vertically grown TiO₂ nanotube arrays were synthesized by using the conventional electrochemical anodization process. The sensor using the fabricated nanotube arrays as the sensing elements demonstrated a good response to different concentrations of formaldehyde from 10 to 50 ppm and a very good selectivity over other reducing gas species such as ethanol and ammonia at room temperature. While the exact sensing mechanism is unclear, some possibilities are briefly discussed.     

Synthesis of novel SnO2/ZnSnO3 core-shell microspheres and their gas sensing properities

Large-scale novel core-shell structural SnO₂/ZnSnO₃ microspheres were successfully synthesized by a simple hydrothermal method with the help of the surfactant poly(vinyl pyrrolidone) PVP. The as-synthesized samples were characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). The results indicate that the shell was formed by single crystalline ZnSnO₃ nanorods and the core was formed by aggregated SnO₂ nanoparticles. The effects of PVP and hydrothermal time on the morphology of SnO₂/ZnSnO₃ were investigated. A possible formation mechanism of these hierarchical structures was discussed. Moreover, the sensor performance of the prepared core-shell SnO₂/ZnSnO₃ nanostructures to ethanol was studied. The results indicate that the as-synthesized samples exhibited high response and quick response-recovery to ethanol.     

Structural and properties of nanocrystalline WO3/TiO2-based humidity sensors elements prepared by high energy activation

Nanocrystalline WO₃/TiO₂-based powders have been prepared by the high energy activation method with WO₃ concentration ranging from 1 to 10 mol%. The samples were thermal treated in a microwave oven at 600 °C for 20 min and their structural and micro-structural characteristics were evaluated by X-ray diffraction, Raman spectroscopy, EXAFS measurements at the Ti K-edge, and transmission electron microscopy. Nitrogen adsorption isotherms and H₂ Temperature Programmed Reduction were also carried out for physical characterization. The crystallite and particle mean sizes ranged from 30 to 40 nm and from 100 to 190 nm, respectively. Good sensor response was obtained for samples with at least 5 mol% WO₃ activated for at least 80 min. Ceramics heat-treated in microwave oven for 20 min have shown similar sensor response as those prepared in conventional oven for 120 min, which is highly cost effective. These results indicate that WO₃/TiO₂ ceramics can be used as a humidity sensor element.     

Ultrahigh ethanol response of SnO2 nanorods at low working temperature arising from La2O3 loading

The influences of La₂O₃ loading on the ethanol sensing properties of SnO₂ nanorods were investigated. An obvious enhancement of response was obtained. The response of 5 wt% La₂O₃ loaded SnO₂ nanorods was up to 213 for 100 ppm ethanol at low working temperature of 200 °C, while that of pure SnO₂ nanorods is 45.1. The improvement in response might be attributed to the presence of basic sites, which facilitated the dehydrogenation process. While the working temperature was increased to 300 °C, the sensor response decreased to 16 for 100 ppm ethanol. Additionally, the La₂O₃ loaded SnO₂ nanorods sensors showed good selectivity to ethanol over methane and hydrogen. Our results demonstrated that the La₂O₃ loaded SnO₂ nanorods were promising in fabricating high performance ethanol sensors which could work at low temperature.     

Ag nanoparticles modified TiO2 spherical heterostructures with enhanced gas-sensing performance

Monodispersed TiO₂ spherical colloids with diameters of about 250 nm were prepared by a sol-gel method. Heterostructural Ag-TiO₂ spheres were manipulated by surface engineering, in which the Ag nanoparticles with an average size of 10 nm were uniformly distributed on the surface of the TiO₂ nanospheres by in situ reduction and growth. The gas-sensing properties of the TiO₂ nanospheres and heterostructural Ag-TiO₂ nanospheres to ethanol and acetone were measured at 350 °C. The results indicated that Ag nanoparticles greatly enhanced the response, stability and response characteristic of TiO₂ nanospheres to the tested gases. Response times of Ag-TiO₂ sensor to 30 ppm acetone and 50 ppm ethanol were <5 s.     

A route to high sensitivity and rapid response Nb2O5-based gas sensors: TiO2 doping, surface embossing, and voltage optimization

We report a novel route for the fabrication of highly sensitive and rapidly responding Nb₂O₅-based thin film gas sensors. TiO₂ doping of Nb₂O₅ films is carried out by co-sputtering without the formation of secondary phases and the surface area of TiO₂-doped Nb₂O₅ films is increased via the use of colloidal templates composed of sacrificial polystyrene beads. The gas sensitivity of Nb₂O₅ films is enhanced through both the TiO₂ doping and the surface embossing. An additional enhancement on the gas sensitivity is obtained by the optimization of the bias voltage applied between interdigitated electrodes beneath Nb₂O₅-based film. More excitingly, such a voltage optimization leads to a substantial decrease in response time. Upon exposure to 50 ppm CO at 350 °C, a gas sensor based on TiO₂-doped Nb₂O₅ film with embossed surface morphology exhibits a very high sensitivity of 475% change in resistance and a rapid response time of 8 s under 3 V, whereas a sensor based on plain Nb₂O₅ film shows a 70% resistance change and a response time of 65 s under 1 V. Thermal stability tests of our Nb₂O₅-based sensor reveal excellent reliability which is of particular importance for application as resistive sensors for a variety gases.     

Optical temperature sensing behavior of enhanced green upconversion emissions from Er-Mo:Yb2Ti2O7 nanophosphor

The Er-Mo:Yb₂Ti₂O₇ nanocrystalline phosphor has been prepared by sol-gel method and used as an optical thermometry. By Mo codoping, the green upconversion (UC) emission intensity increased about 250 times than that of Er:Yb₂Ti₂O₇ under a 976 nm laser diode excitation. It indicates that such green enhancement arises from the high excited state energy transfer (HESET) with the |²F_7/2, ³T₂> state of Yb³⁺-MoO₄²⁻ dimer to the ⁴F_7/2 level of Er³⁺. The fluorescence intensity ratio (FIR) of the two green UC emissions bands was studied as a function of temperature in a range of 290-610 K, and the maximum sensitivity and the temperature resolution were approximately 0.0074 K⁻¹ and 0.1 K, respectively. It suggests that the Er-Mo:Yb₂Ti₂O₇ nanophosphor with a higher green UC emissions efficiency is a promising prototype for applications in optical temperature sensing.     

Solid-state potentiometric SO2 sensor combining NASICON with V2O5-doped TiO2 electrode

A compact tubular sensor based on NASICON (sodium super ionic conductor) and V₂O₅-doped TiO₂ sensing electrode was designed for the detection of SO₂. In order to reduce the size of the sensor, a thick-film of NASICON was formed on the outer surface of a small Al₂O₃ tube; furthermore, a thin layer of V₂O₅-doped TiO₂ with nanometer size was attached on the NASICON as a sensing electrode. This paper investigated the influence of V₂O₅ doping and sintering temperature on the characteristics of the sensor. The sensor attached with 5 wt% V₂O₅-doped TiO₂ sintered at 600 °C exhibited excellent sensing properties to 1–50 ppm SO₂ in air at 200–400 °C. The EMF value of the sensor was almost proportional to the logarithm of SO₂ concentration and the sensitivity (slope) was −78 mV/decade at 300 °C. It was also seen that the sensor showed a good selectivity to SO₂ against NO, NO₂, CH₄, CO, NH₃ and CO₂. Moreover, the sensor had speedy response kinetics to SO₂ too, the 90% response time to 50 ppm SO₂ was 10 s, and the recovery time was 35 s. On the basis of XPS analysis for the SO₂-adsorbed sensing electrode, a sensing mechanism involving the mixed potential at the sensing electrode was proposed.     

Gas sensing properties of SnO2 nanowires on micro-heater

The SnO₂ nanowires (NWs) network gas sensors were fabricated on a micro-electrode and heater suspended in a cavity. The sensors showed selective detection to C₂H₅OH at a heater power during sensor operation as low as 30-40 mW. The gas response and response speed of the SnO₂ NWs sensor to 100 ppm C₂H₅OH were 4.6- and 4.7-fold greater, respectively, than those of the SnO₂ nanoparticles (NPs) sensor with the same electrode geometry. The reasons for these enhanced gas sensing characteristics are discussed in relation to the sensing materials and sensor structures.     

Microstructure control of TiO2 nanotubular films for improved VOC sensing

Porous gas sensing films composed of TiO₂ nanotubes were fabricated for the detection of volatile organic compounds (VOCs), such as alcohol and toluene. In order to control the microstructure of TiO₂ nanotubular films, ball-milling treatments were used to shorten the length of TiO₂ nanotubes and to improve the particle packing density of the films without destroying their tubular morphology and crystal structure. The ball-milling treatment successfully modified the porosity of the gas sensing films by inducing more intimate contacts between nanotubes, as confirmed by scanning electron microscopy (SEM) and mercury porosimetry. The sensor using nanotubes after the ball-milling treatment for 3 h exhibited an improved sensor response and selectivity to toluene (50 ppm) at the operating temperature of 500 °C. However, an extensive ball-milling treatment did not enhance the original sensor response, probably owing to a decrease in the porosity of the film. The results obtained indicated the importance of the microstructure control of sensing layers in terms of particle packing density and porosity for detecting large sized organic gas molecules.     

Studies on the gas sensing behaviour of nanosized CuNb2O6 towards ammonia, hydrogen and liquefied petroleum gas

Appreciable changes in resistance of polycrystalline nanosized CuNb₂O₆ upon exposure to reducing gases like hydrogen, liquefied petroleum gas (LPG) and ammonia in ambient atmosphere recognize the material as a gas sensor. Nanosized CuNb₂O₆ synthesized by thermal decomposition of an aqueous precursor solution containing copper nitrate, niobium tartrate and tri-ethanol amine (TEA), followed by calcination at 700 °C for 2 h, has been characterized using X-ray diffraction (XRD) study, transmission electron microscopy (TEM), field-emission scanning electron microscope (FESEM), energy dispersive X-ray (EDX) analysis and Brunauer–Emmett–Teller (BET) surface area measurement. The synthesized CuNb₂O₆ exhibits monoclinic structure with crystallite size of 25 nm, average particle size of 25–40 nm and specific surface area of 55 m² g⁻¹.     

Synthesis of ZnO nanorods and its application in NO2 sensors

One-dimensional (1D) ZnO nanorods with pencil-like shape and high aspect ratio were successfully synthesized using a cetyltrimethylammonium bromide (CTAB)-assisted hydrothermal process at 90 °C. The surface morphology and structure of nanocrystals were characterized by FE-SEM, XRD and XPS analysis. Experimental results show that the surfactant and base concentration play important roles in the formation and growth orientation of ZnO nanorods. The ZnO nanorods synthesized exhibits high response and selectivity to NO₂, the highest response to 40 ppm NO₂ reached 206 and the selectivity with respect to CO and CH₄ at same concentration reached 10.3 and 30 times, respectively. The effects of synthesis method, surfactant and calcination condition on sensing properties were systematically investigated. The results indicate that the CTAB-assisted low temperature hydrothermal process is a potentially facile method for synthesis of 1D ZnO nanorods and excellent potential candidates as gas sensing materials.     

Fabrication at wafer level of miniaturized gas sensors based on SnO2 nanorods deposited by PECVD and gas sensing characteristics

SnO₂ nanorods were successfully deposited on 3″ Si/SiO₂ wafers by inductively coupled plasma-enhanced chemical vapour deposition (PECVD) and a wafer-level patterning of nanorods layer for miniaturized solid state gas sensor fabrication were performed. Uniform needle-shaped SnO₂ nanorods in situ grown were obtained under catalyst- and high temperature treatment-free growth condition. These nanorods have an average diameter between 5 and 15 nm and a length of 160-300 nm. The SnO₂-nanorods based gas sensors were tested towards NH₃ and CH₃OH and gas sensing tests show remarkable response, showing promising and repeatable results compared with the SnO₂ thin films gas sensors.     

Growth kinetics of nanograins in SnO2 fibers and size dependent sensing properties

The present study investigates the growth kinetics of SnO₂ nanograins and determines the activation energy and mechanism of the growth in nanofiber form. The activation energy for the growth of the SnO₂ nanograins was estimated to be ∼28.28 kJ/mol, which is an order of magnitude smaller than that of bulk SnO₂. The estimated m value suggests that the growth mechanism of the nanograins is primarily through lattice diffusion in the pore control scheme. Precise control of the calcination temperature and time is necessary to maximize the efficiency of electrospinning-synthesized SnO₂ nanofibers for sensor applications. Importantly, the sensor fabricated with nanofibers of small nanograins showed much better sensing properties to CO and NO₂ comparing with the sensor fabricated with nanofibers of large nanograins. A mechanism to explain this finding is suggested.     

Synthesis of quantum size ZnO crystals and their gas sensing properties for NO2

Quantum size ZnO crystals have been synthesized successfully by a room temperature sol-gel process. Oleic acid (OA) has been used as capping agent to control the particle size of ZnO. The crystal structure and size of the ZnO are characterized by the X-ray diffraction (XRD) and transmission electron microscope (TEM). The XRD results show the as-synthesized ZnO has hexagonal wurtzite structure and the average crystallite size is 5.7 nm which is little less than TEM result. It is testified by photoluminescence (PL) and Raman spectra that the quantum size ZnO keeps the crystal structure of the bulk ZnO and possesses more surface defects. The quantum size ZnO has the highest response of 280 to NO₂ and the highest selectivity of 31 and 49 corresponding to CO and CH₄ at operating temperature of 290 °C. The effect of calcination temperatures on sensing property and transient response of the ZnO sensor are also investigated.     

Effect of surface defects on biosensing properties of TiO2 nanotube arrays

In this paper, highly ordered titania nanotube (TNT) arrays fabricated by anodization were annealed at different temperatures in CO to create different concentrations of surface defects. The samples were characterized by SEM, XRD and XPS. The results showed different concentrations of Ti³⁺ defects were doped in TNT arrays successfully. Furthermore, after co-immobilized with horseradish peroxidase (HRP) and thionine chloride (Th), TNT arrays was employed as a biosensor to detect hydrogen peroxide (H₂O₂) using an amperometric method. Cyclic voltammetry results and UV-Vis absorption spectra presented that with an increase of Ti³⁺ defects concentration, the electron transfer rate and enzyme adsorption amount of TNT arrays were improved largely, which could be ascribed to the creation of hydroxyl groups on TNT surface due to dissociative adsorption of water by Ti³⁺ defects. Annealing in CO at 500 °C appeared to be the most favorable condition to achieve desirable nanotube array structure and surface defects density (0.27%), thus the TNT arrays showed the largest adsorption amount of enzyme (9.16 μg/cm²), faster electron transfer rate (1.34 × 10⁻³ cm/s) and the best response sensitivity (88.5 μA/mM l⁻¹).     

Improved crystalline structure and H2S sensing performance of CuO-Au-SnO2 thin film using SiO2 additive concentration

In situ SiO₂-doped SnO₂ thin films were successfully prepared by liquid phase deposition. The influence of SiO₂ additive as an inhibitor on the surface morphology and the grain size for the thin film has been investigated. These results show that the morphology of SnO₂ film changes significantly by increasing the concentration of H₂SiF₆ solution which decreases the grain size of SnO₂. The stoichiometric analysis of Si content in the SnO₂ film prepared from various Si/Sn molar ratios has also been estimated. For the sensing performance of H₂S gas, the SiO₂-doped Cu-Au-SnO₂ sensor presents better sensitivity to H₂S gas compared with Cu-Au-SnO₂ sensor due to the fact that the distribution of SiO₂ particles in grain boundaries of nano-crystallines SnO₂ inhibited the grain growth (<6 nm) and formed a porous film. By increasing the Si/Sn molar ratio, the SiO₂-doped Cu-Au-SnO₂ gas sensors (Si/Sn = 0.5) exhibit a good sensitivity (S = 67), a short response time (t_90% < 3 s) and a good gas concentration characteristic (α = 0.6074). Consequently, the improvement of the nano-crystalline structures and high sensitivity for sensing films can be achieved by introducing SiO₂ additive into the SnO₂ film prepared by LPD method.     

Critical thermodynamic evaluation and optimization of the MnO–SiO2–“ TiO2 ”–“ Ti2O3 ” system

A complete review, critical evaluation, and thermodynamic optimization of phase equilibrium and thermodynamic properties of the MnO–SiO₂–“ TiO₂”–“ Ti₂O₃” systems at 1 bar pressure are presented. The molten oxide phase was described by the Modified Quasichemical Model. The Gibbs energies of the manganosite, spinel, pyrophanite and pseudobrookite and rutile solid solutions were taken from the previous study. A set of optimized model parameters for the molten oxide phase was obtained which reproduces all available reliable thermodynamic and phase equilibrium data within experimental error limits from 25 ^°C to above the liquidus temperatures over the entire range of compositions and oxygen partial pressure in the range of pO₂ from 10⁻²⁰ bar to 10⁻⁷ bar. Complex phase relationships in these systems have been elucidated, and discrepancies among the data have been resolved. The database of model parameters can be used along with software for Gibbs energy minimization in order to calculate any phase diagram section or thermodynamic properties.     

Room-temperature CO2 sensing using metal-insulator-semiconductor capacitors comprising atomic-layer-deposited La2O3 thin films

Room temperature detection of CO₂ using metal-insulator-silicon (MIS) devices is reported. These devices comprise atomic layer deposited La₂O₃ thin films as the gas-sensitive dielectric layer and Pt, Pt/Ta and Al as the electrodes. Physical mechanisms that lead to the detection of CO₂ at room temperature are discussed.