New hole blocking material for green-emitting phosphorescent organic electroluminescent devices

The new amorphous molecular material, 2,5-bis(4-triphenylsilanyl-phenyl)-[1,3,4]oxadiazole, that functions as good hole blocker as well as electron transporting layer in the phosphorescent devices. The obtained material forms homogeneous and stable amorphous film. The new synthesized showed the reversible cathodic reduction for hole blocking material and the low reduction potential for electron transporting material in organic electroluminescent (EL) devices. The fabricated devices exhibited high performance with high current efficiency and power efficiency of 45 cd/A and 17.7 lm/W in 10 mA/cm², which is superior to the result of the device using BAlq (current efficiency: 31.5 cd/A and power efficiency: 13.5 lm/W in 10 mA/cm²) as well-known hole blocker. The ITO/DNTPD/α-NPD/6% Ir(ppy)₃ doped CBP/2,5-bis(4-triphenylsilanyl-phenyl)-[1,3,4]oxadiazole as both hole blocking and electron transporting layer/Al device showed efficiency of 45 cd/A and maximum brightness of 3000 cd/m² in 10 mA/cm².     

Single layer deep blue polymer light emitting diodes with chlorinated Indium Tin Oxide after surface modification for high performance

Chlorinated-Indium Tin Oxide (Cl-ITO) has been found to have higher work function than the pristine ITO. When used as anode for polymer light-emitting diodes (PLEDs) with deep blue emitting β-phase poly(9,9-di-n-octylfluorene) (β-PFO) as the emitting layer, it allows hole injection without barrier. However, the presence of chlorine free radical on the surface of Cl-ITO leads to an exciton quenching effect. The surface modification on anode by dipping into 1% ammonium (NH₄OH) aqueous solution to remove free chlorine radicals on surface can enhance device performance significantly. The single layer device Cl-ITO (treated)/β-PFO/CsF/Al gives the maximum brightness 16773 cd/m² and maximum luminance efficiency 2.40 cd/A, which are higher than those with untreated Cl-ITO, (2519; 0.27) and CFx treated ITO, (7800; 1.8) and PEDOT:PSS coated ITO, (12884; 1.43). The ease of the present anode treatment allows the one-layer-only device to be a promising candidate for practical application.     

Optoelectronic characteristics of MEH-PPV polymer LEDs with thin,doped composition-graded a-SiC:H carrier injection layers

The optoelectronic characteristics of poly(2-methoxy-5-(2′ethyl-hexoxy)-1,4-phenylene-vinylene) (MEH-PPV) polymer LEDs (PLEDs) have been improved by employing thin doped composition-graded (CG) hydrogenated amorphous silicon–carbide (a-SiC:H) films as carrier injection layers and O₂-plasma treatment on indium–tin-oxide (ITO) transparent electrode, as compared with previously reported ones having doped constant-optical-gap a-SiC:H carrier injection layers. For PLEDs with an n-type a-SiC:H electron injection layer (EIL) only, the electroluminescence (EL) threshold voltage and brightness were improved from 7.3 V, 3162 cd/m² to 6.3 V, 5829 cd/m² (at a current density J = 0.6 A/cm²), respectively, by using the CG technique. The enhancement of EL performance of the CG technique was due to the increased electron injection efficiency resulting from a smoother barrier and reduced recombination of charge carriers at the EIL and MEH-PPV interface. Also, surface modification of the ITO transparent electrode by O₂-plasma treatment was used to further improve the EL threshold voltage and brightness of this PLED to 5.1 V, 6250 cd/m² (at J = 0.6 A/cm²). Furthermore, by employing the CG n[p]-a-SiC:H film as EIL [hole injection layer (HIL)] and O₂-plasma treatment on the ITO electrode, the brightness of PLEDs could be enhanced to 9350 cd/m² (at a J = 0.3 A/cm²), as compared with the 6450 cd/m² obtained from a previously reported PLED with a constant-optical-gap n-a-SiCGe:H EIL and p-a-Si:H HIL.     

Influence of plasma treatment of ITO surface on the growth and properties of hole transport layer and the device performance of OLEDs

Surface energy of indium tin oxide (ITO) surfaces treated by different plasmas, including argon (Ar–P), hydrogen (H₂–P), carbon tetrafluoride (CF₄–P), and oxygen (O₂–P), was measured and analyzed. The initial growth mode of hole transport layers (HTLs) was investigated by atomic force microscope observation of thermally deposited 2 nm thick N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine (NPB) on the plasma treated ITO surfaces. The results show that different plasma treatments of ITO influence the growth of HTLs in significantly different ways through the modification of surface energy, especially the polar component. The O₂–P and CF₄–P were found to be most effective in enhancing surface polarity through decontamination and increased dipoles, leading to more uniform and denser nucleation of NPB on the treated ITO surfaces. It was further found that increased density of nucleation sites resulted in a decreased driving voltage of OLEDs. Under the same fabricating conditions, a lowest driving voltage of 4.1 V was measured at a luminance of 200 cd/m² for the samples treated in CF₄–P, followed by the samples treated in O₂–P (5.6 V), Ar–P (6.4 V), as-clean (7.0 V) and H₂–P (7.2 V) plasma, respectively. The mechanisms behind the improved performance were proposed and discussed.     

p-Doped p-phenylenediamine-substituted fluorenes for organic electroluminescent devices

Two novel p-phenylenediamine-substituted fluorenes have been designed and synthesized. Their applications as hole injection materials in organic electroluminescent devices were investigated. These materials show a high glass transition temperature and a good hole-transporting ability. It has been demonstrated that the 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ) doped p-phenylene-diamine-substituted fluorenes, in which F4-TCNQ acts as p-type dopant, are highly conducting with a good hole-transporting property. The organic light emitting devices (OLEDs) utilizing these F4-TCNQ-doped materials as a hole injection layer were fabricated and investigated. The pure Alq₃-based OLED device shows a current efficiency of 5.2 cd/A at the current density of 20 mA/cm² and the operation lifetime is 1500 h with driving voltage increasing only about 0.7 mV/h. The device performance and stability of this hole injection material meet the benchmarks for the commercial requirements for OLED materials.     

High performance top-emitting organic light-emitting diodes with copper iodide-doped hole injection layer

Efficient top-emitting organic light-emitting diodes were fabricated using copper iodide (CuI) doped 1,4-bis[N-(1-naphthyl)-N′-phenylamino]-4,4′-diamine (NPB) as a hole injection layer and Ir(ppy)₃ doped CBP as the emitting layer. CuI doped NPB layer functions as an efficient p-doped hole injection layer and significantly improves hole injection from a silver bottom electrode. The top-emitting device shows high current efficiency of 69 cd/A with Lambertian emission pattern. The enhanced hole injection is originated from the formation of the charge transfer complex between CuI and NPB.     

Charge injection in metal/organic/metal structures with ZnO:Al/organic interface modified by Zn1−xMgxO:Al layer

Aluminum-doped zinc oxide (ZnO:Al, AZO) electrodes were covered with very thin (∼6 nm) Zn_1−xMg_xO:Al (AMZO) layers grown by atomic layer deposition. They were tested as hole blocking/electron injecting contacts to organic semiconductors. Depending on the ALD growth conditions, the magnesium content at the film surface varied from x = 0 to x = 0.6. Magnesium was present only at the ZnO:Al surface and subsurface regions and did not diffuse into deeper parts of the layer. The work function of the AZO/AMZO (x = 0.3) film was 3.4 eV (based on the ultraviolet photoelectron spectroscopy). To investigate carrier injection properties of such contacts, single layer organic structures with either pentacene or 2,4-bis[4-(N,N-diisobutylamino)-2,6-dihydroxyphenyl] squaraine layers were prepared. Deposition of the AMZO layers with x = 0.3 resulted in a decrease of the reverse currents by 1–2 orders of magnitude and an improvement of the diode rectification. The AMZO layer improved hole blocking/electron injecting properties of the AZO electrodes. The analysis of the current-voltage characteristics by a differential approach revealed a richer injection and recombination mechanisms in the structures containing the additional AMZO layer. Among those mechanisms, monomolecular, bimolecular and superhigh injection were identified.     

Solution-processed near-infrared polymer photodetectors with an inverted device structure

Solution-processed near-infrared polymer photodetectors with an inverted device structure were designed and fabricated. By introducing ZnO_x and MoO₃ as an electron extraction layer and a hole extraction layer, respectively, the asymmetric characteristics of the inverted polymer photodetectors was constructed. Operating at room temperature, the inverted polymer photodetectors exhibited the detectivity over 10¹² cm Hz^1/2/W from 400 to 850 nm, resulting from the enhanced photocurrent and reduced dark current induced by fabricating photoactive layer from solution with processing additive 1,8-diiodooctane. These device performances were comparable to those of inorganic counterparts.     

Enhanced pure red electroluminescence intensity of Eu(o-BBA)3(phen) by red dye co-doping and inorganic semiconductor as charge carrier function layer

There is an emission peak at 494 nm in the electroluminescence (EL) of PVK [poly(n-vinylcarbazole)]: Eu(o-BBA)₃(phen) besides PVK exciton emission and Eu³⁺ characteristic emissions. Both the peaking at 494 nm emission and PVK emission influenced the color purity of red emission from Eu(o-BBA)₃(phen). In order to restrain these emissions and obtain high intensity red emission, 4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7,-tetramethyljulolidy-9-enyl)-4Hpyran (DCJTB) and Eu(o-BBA)₃(phen) were co-doped in PVK solution and used as the active emission layer. The EL intensity of co-doped devices reached to 420 cd/m² at 20 V driving voltage. The chromaticity coordinates of EL was invariable (x = 0.55, y = 0.36) with the increase of driving voltage. For further improvement of EL intensity, organic–inorganic hybrid devices (ITO/active emission layer/ZnS/Al) were fabricated. The EL intensity was increased by a factor of 2.5 [(420 cd/m²)/(168 cd/m²)] when the Eu complex was doped with an efficient dye DCJTB, and by a factor of ≈4 [(650 cd/m²)/(168 cd/m²)] when in addition ZnS layer was deposited on such an emitting layer prior to evaporation of the Al cathode.     

Highly efficient green phosphorescent organic light emitting diodes with simple structure

A series of simple structures is investigated for realization of the highly efficient green phosphorescent organic light emitting diodes with relatively low voltage operation. All the devices were fabricated with mixed host system by using 1,1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) and 1,3,5-tri(p-pyrid-3-yl-phenyl)benzene (TpPyPB) which were known to be hole and electron type host materials due to their great hole and electron mobilities [μ_h(TAPC): 1 × 10^?2 cm²/V s and μ_e(TpPyPB): 7.9 × 10^?3 cm²/V s] [1]. The optimized device with thin TAPC (5–10 nm) as an anode buffer layer showed relatively high current and power efficiency with low roll-off characteristic up to 10,000 cd/m². The performances of the devices; with buffer layer were compared to those of simple devices with single layer and three layers. Very interestingly, the double layer device with TAPC buffer layer showed better current and power efficiency behavior compared to that of three layer device with both hole and electron buffer layers (TAPC, TpPyPB, respectively).     

Efficient simplified orange and white phosphorescent organic light-emitting devices with reduced efficiency roll-off

Efficient orange phosphorescent organic light-emitting devices based on simplified structure with maximum efficiencies of 46.5 lm/W and 51.5 cd/A were reported. One device had extremely low efficiency roll-off with efficiencies of 50.6 cd/A, 45.0 cd/A and 39.2 cd/A at 1000 cd/m², 5000 cd/m² and 10,000 cd/m² respectively. The reduced efficiency roll-off was attributed to more balanced carrier injection and broader recombination zone. The designed simplified white device showed much lower efficiency roll-off than the control one based on multiple emitting layers. The efficiency of simplified white device was 40.8 cd/A at 1000 cd/m² with Commission Internationale de I’Eclairage coordinates of (0.39, 0.46).     

Efficient fluorescent white organic light-emitting diodes using co-host/emitter dual-role possessed di(triphenyl-amine)-1,4-divinyl-naphthalene

Efficient fluorescent white organic light-emitting diodes with low carrier-injection barriers were fabricated with device structure of indium tin oxide/N,N′-bis-(1-naphthy)-N,N′-diphenyl-1,1′-biphenyl-4-4′-diamine/white emission layer/1,3,5-tris(N-phenyl-benzimidazol-2-yl)benzene/lithium fluoride/aluminium. By blending in the blue host of 1-butyl-9,10-naphthalene-anthracene in the emissive layer an efficient electro-luminescent greenish-blue co-host of di(triphenyl-amine)-1,4-divinyl-naphthalene, with the doping of a trace amount of red dye of 4-(dicyano-methylene)-2-methyl-6-(julolidin-4-yl-vinyl)-4H-pyran, bright and colour-stable white emission with high power-efficiency of 14.6 lm/W at 100 cd/m² or current efficiency of 19.2 cd/A at 300 cd/m² or 18.7 cd/A at 10,000 cd/m² was obtained. The resulted synergistic increase in brightness and efficiency may be attributed to the presence of cascading new routes with comparatively lower electron injection barrier.     

Carrier transport of inverted quantum dot LED with PEIE polymer

An inverted-type quantum-dot light-emitting-diode (QD LED), employing low-work function organic material polyethylenimine ethoxylated (PEIE) as electron injection layer, was fabricated by all solution processing method, excluding anode electrode. From transmission electron microscopy (TEM) and scanning electron microscopy (SEM) studies, it was confirmed that CdSe@ZnS QDs with 7 nm size were uniformly distributed as a monolayer on PEIE layer. In this inverted QD LED, two kinds of hybrid organic materials, [poly (9,9-di-n-octyl-fluorene-alt-benzothiadiazolo)(F8BT) + poly(N,N′-bis(4-butylphenyl)-N,N′-bis(phenyl)benzidine (poly-TPD)] and [4,4′-N,N′-dicarbazole-biphenyl (CBP) + poly-TPD], were adopted as hole transport layer having high highest occupied molecular orbital (HOMO) level for improving hole transport ability. At a low-operating voltage of 8 V, the device emits orange and red spectral radiation with high brightness up to 2450 and 1420 cd/m², and luminance efficacy of 1.4 cd/A and 0.89 cd/A, respectively, at 7 V applied bias. Also, the carrier transport mechanisms for the QD LEDs are described by using several models to fit the experimental I–V data.     

Green and blue-green phosphorescent heteroleptic iridium complexes containing carbazole-functionalized β-diketonate for non-doped organic light-emitting diodes

Two novel iridium complexes both containing carbazole-functionalized β-diketonate, Ir(ppy)₂(CBDK) [bis(2-phenylpyridinato-N,C²)iridium(1-(carbazol-9-yl)-5,5-dimethylhexane-2,4-diketonate)], Ir(dfppy)₂(CBDK) [bis(2-(2,4-difluorophenyl)pyridinato-N,C²)iridium(1-(carbazol-9-yl)-5,5-dimethylhexane-2,4-diketonate)] and two reported complexes, Ir(ppy)₂(acac) (acac = acetylacetonate), Ir(dfppy)₂(acac) were synthesized and characterized. The electrophosphorescent properties of non-doped device using the four complexes as emitter, respectively, with a configuration of ITO/N,N′-diphenyl-N,N′-bis(1-naphthyl)-1,1′-diphenyl-4,4′-diamine (NPB) (20 nm)/iridium complex (20 nm)/2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) (5 nm)/tris(8-hydroxyquinoline)aluminum (AlQ) (45 nm)/Mg_0.9Ag_0.1 (200 nm)/Ag (80 nm) were examined. In addition, a most simplest device, ITO/Ir(ppy)₂(CBDK) (80 nm)/Mg_0.9Ag_0.1 (200 nm)/Ag (80 nm), and two double-layer devices with configurations of ITO/NPB (30 nm)/Ir(ppy)₂(CBDK) (30 nm)/Mg_0.9Ag_0.1 (200 nm)/Ag (80 nm) and ITO/Ir(ppy)₂(CBDK) (30 nm)/AlQ (30 nm)/Mg_0.9Ag_0.1 (200 nm)/Ag (80 nm) were also fabricated and examined. The results show that the non-doped four-layer device for Ir(ppy)₂(CBDK) achieves maximum lumen efficiency of 4.54 lm/W and which is far higher than that of Ir(ppy)₂(acac), 0.53 lm/W, the device for Ir(dfppy)₂(CBDK) achieves maximum lumen efficiency of 0.51 lm/W and which is also far higher than that of Ir(dfppy)₂(acac), 0.06 lm/W. The results of simple devices involved Ir(ppy)₂(CBDK) show that the designed complex not only has a good hole transporting ability, but also has a good electron transporting ability. The improved performance of Ir(ppy)₂(CBDK) and Ir(dfppy)₂(CBDK) can be attributed to that the bulky carbazole-functionalized β-diketonate was introduced, therefore the carrier transporting property was improved and the triplet–triplet annihilation was reduced.     

Hydroxyethyl cellulose filled with M2+ chelate complexes with ethylenediaminetetraacetic acid (EDTA) as an effective electron-injection layer for polymer light-emitting diodes

An effective electron-injection layer (EIL) is crucial to the development of highly efficient polymer light-emitting diodes (PLEDs) using stable, high work-function aluminium as the cathode. This work presents the first investigation using hydroxyethyl cellulose (HEC), filled with chelate complexes [(CH₃COO)₂-M, EDTA-M; M: Ca²⁺, Mg²⁺], as an electron-injection layer (EIL) to fabricate multilayer polymer light-emitting diodes (ITO/PEDO:PSS/HY-PPV/EIL/Al) by spin-coating processes. Devices based on HEC doped with EDTA-M provided the best performance. The maximum luminance and maximum current efficiency of polymer light-emitting diodes with EDTA-Ca in an HEC layer were 7502 cd/m² and 2.85 cd/A, respectively, whereas those with EDTA-Mg were 8443 cd/m² and 3.12 cd/A, which was approximately seven- to eight-fold of that without EIL. This performance enhancement was attributed to electron donation from the chelator that reduces metal cations to a “pseudo-metallic state”, enabling it to act as an intermediate step to facilitate electron injection. The results demonstrate that chelates of bivalent cations with EDTA can potentially serve as electron-injection materials for optoelectronic applications.     

Enhancing the short-circuit current,efficiency of inverted organic solar cells using tetra sulfonic copper phthalocyanine (TS-CuPc) as electron transporting layer

Efficient bulk-heterojunction polymer solar cells based on poly(3-hexylthiophene) (P3HT) blended with a fullerene derivative, [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) were fabricated in inverted configuration by using copper phthalocyanine-3,4′,4′′,4′′′tetra-sulfonated acid tetrasodium salt (TS-CuPc) as the electron collecting layer and MoO₃ as hole collecting layer. TS-CuPc is observed to be critical for the device performance, significantly enhancing the Jsc and the PCE compared to devices based on TiOx. The optimal thicknesses of MoO₃ and TS-CuPc were 10 nm and 15 nm, respectively. Based on these optimal parameters, the PCE of 3.6% was obtained compared to 3.4% for the reference TiOx/P3HT:PCBM/MoO₃/Ag.     

Energy level alignment in PCDTBT:PC70BM solar cells: Solution processed NiOx for improved hole collection and efficiency

Solution-based NiO_x outperforms PEDOT:PSS in device performance and stability when used as a hole-collection layer in bulk-heterojunction (BHJ) solar cells formed with poly[N-9′-heptadecanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole) (PCDTBT) and PC₇₀BM. The origin of the enhancement is clarified by studying the interfacial energy level alignment between PCDTBT or the 1:4 blended heterojunctions and PEDOT:PSS or NiO_x using ultraviolet and inverse photoemission spectroscopies. The 1.6 eV electronic gap of PEDOT:PSS and energy level alignment with the BHJ result in poor hole selectivity of PEDOT:PSS and allows electron recombination at the PEDOT:PSS/BHJ interface. Conversely, the large band gap (3.7 eV) of NiO_x and interfacial dipole (?0.6 eV) with the organic active layer leads to a hole-selective interface. This interfacial dipole yields enhanced electron blocking properties by increasing the barrier to electron injection. The presence of such a strong dipole is predicted to further promote hole collection from the organic layer into the oxide, resulting in increased fill factor and short circuit current. An overall decrease in recombination is manifested in an increase in open circuit voltage and power conversion efficiency of the device on NiO_x versus PEDOT:PSS interlayers.     

Interface electronic structures of organic light-emitting diodes with WO3 interlayer: A study by photoelectron spectroscopy

The energy level alignment and chemical reaction at the interface between the hole injection and transport layers in an organic light-emitting diode (OLED) structure has been studied using in-situ X-ray and ultraviolet photoelectron spectroscopy. The hole injection barrier measured by the positions of the highest occupied molecular orbital (HOMO) for N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine (NPB)/indium tin oxide (ITO) was estimated 1.32 eV, while that with a thin WO₃ layer inserted between the NPB and ITO was significantly lowered to 0.46 eV. This barrier height reduction is followed by a large work function change which is likely due to the formation of new interface dipole. Upon annealing the WO₃ interlayer at 350 °C, the reduction of hole injection barrier height largely disappears. This is attributed to a chemical modification occurring in the WO₃ such as oxygen vacancy formation.     

Iminodibenzyl-substituted distyrylarylenes as dopants for blue and white organic light-emitting devices

A series of highly efficient blue materials based on iminodibenzyl-substituted distyrylarylene (IDB-series) fluorescent dyes using the concept of steric-compression have been designed and synthesized by means of a rigidized and over-sized ring. The steric-compression effect can shorten the effective conjugation length (chromophore) of the molecule and the added phenyl moiety in the core can alleviate the propensity for molecular aggregation. These materials also possess high glass transition temperature over 100 °C. The blue IDB-Ph device achieved a maximum external quantum efficiency of 4.8% with a Commission Internationale de l’Eclairage (CIE_x,y) coordinate of (0.16, 0.28). When applied in two-element white OLED system, the IDB-Ph doped device achieved a luminance efficiency of 11.0 cd/A with a CIE_x,y color coordinate of (0.29, 0.36).     

Highly efficient two component phosphorescent organic light-emitting diodes based on direct hole injection into dopant and gradient doping

A series of two component phosphorescent organic light-emitting diodes (PHOLEDs) combing the direct hole injection into dopant strategy with a gradient doping profile were demonstrated. The dopant, host, as well as molybdenum oxide (MoO₃)-modified indium tin oxide (ITO) anode were investigated. It is found that the devices ITO/MoO₃ (0 or 1 nm)/fac-tris(2-phenylpyridine)iridium [Ir(ppy)₃]:1,3,5-tris(N-phenylbenzimidazole-2-yl)benzene (TPBi) (30 → 0 wt%, 105 nm)/LiF (1 nm)/Al (100 nm) show maximum external quantum efficiency (EQE) over 20%, which are comparable to multi-layered PHOLEDs. Moreover, the systematic variation of the host from TPBi to 4,7-diphenyl-1,10-phenanthroline (Bphen), dopant from Ir(ppy)₃ to bis(2-phenylpyridine)(acetylacetonate)iridium [Ir(ppy)₂(acac)], and anodes between ITO and ITO/MoO₃ indicates that balancing the charge as well as controlling the charge recombination zone play critical roles in the design of highly efficient two component PHOLEDs.