Hemocompatibility evaluation of polyurethane film with surface‐grafted poly(ethylene glycol) and carboxymethyl‐chitosan

To improve the hemocompatibility and biocompatibility of polyurethanes (PUs), PU surface was firstly modified by poly(ethylene glycol) PEG through acryloyl chloride and subsequently grafted on carboxymethyl‐chitosan (CMCS). Attenuated total reflection Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy analysis confirmed that carboxyl‐chitosan was grafted onto PUs surface. The surface properties of unmodified and modified PU films were determined and compared by water contact angle assessment. After PEG and CMCS grafting, the surface energy of the PU film was increased. Furthermore, the hemocompatibility of the modified PU films was systematically evaluated by bovine serum albumin (BSA) adsorption, the dynamic blood clotting test, the platelet adhesion test, and the hemolytic test. It appears that BSA adsorption and platelet adhesion were significantly curtailed for the modified PU films. Therefore, the obtained results showed the modified PU film has better hemocompatibility. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Immobilization of poly(ethylene oxide) on poly(ethylene terephthalate) using a plasma polymerization process

Poly(ethylene oxide) (PEO) has been covalently immobilized on poly(ethylene terephthalate) (PET) films using a radio frequency glow discharge polymer deposition process, followed by chemical coupling. Amino or hydroxyl groups were introduced onto the surface of the PET by exposing the films to allylamine and allyl alcohol plasmas. These functional groups were activated with cyanuric chloride, and then they were reacted with PEO. ESCA and water contact angle studies were used to characterize the surfaces of these films during the different stages of the reaction. The films containing the higher molecular weight PEO exhibited an increase in the ? C? O? peak of the C_ls ESCA spectrum and an increase in oxygen content on the film surfaces. Increasing the molecular weight of the PEO attached to the PET also resulted in an increased wettability of the films.     

Direct electrochemistry and electrocatalysis of hemoglobin immobilized in poly(ethylene glycol) grafted multi-walled carbon nanotubes

The novel poly(ethylene glycol) (PEG) grafted multi-walled carbon nanotubes (PEG-g-MWCNTs) were synthesized by the covalent functionalization of MWCNTs with hydroxyl-terminated PEG chains, exhibited excellent hydrophilicity and biocompatibility. The PEG-g-MWCNTs were characterized by Fourier transform infrared spectra, transmission electron microscopy, and thermogravimetric analysis, which verified that PEG chains were grafted onto the surface of the MWCNTs. The PEG-g-MWCNTs were then used as substrates for the immobilization of hemoglobin (Hb) and their bioelectrochemical behaviors were studied. Electrochemical impedance spectroscopy was used to confirm the adsorption of Hb onto the surface of PEG-g-MWCNTs. The Hb immobilized in PEG-g-MWCNTs retained its near-native conformations as characterized by the UV-vis spectroscopy. The cyclic voltammetry results of Hb/PEG-g-MWCNT modified electrode showed a pair of well-defined and quasi reversible redox peaks centered at approximate −0.34 V (vs. saturated calomel electrode), which was the characteristic peaks of Hb Fe(III)/Fe(II), in pH 7.0 phosphate buffer solution. Hb immobilized onto the surface of PEG-g-MWCNTs demonstrated good bioelectrocatalytic activities for the reduction of nitrite.     

A photochemical method for immobilization of azidated dextran onto aminated poly(ethylene terephthalate) surfaces

BACKGROUND: Dextran, a bacterial polysaccharide, has been reported to be as good as poly(ethylene glycol) in its protein‐rejecting and cell‐repelling abilities. In addition, the multivalent nature of dextran is advantageous for surface grafting of biologically active molecules. We report here a method to photochemically bind dextran hydrogel films to aminated poly(ethylene terephthalate) (PET) surfaces in aqueous media using a heterobifunctional crosslinker, 4‐azidobenzoic acid. In order to achieve this, dextran was first functionalized with the crosslinker using carbodiimide chemistry followed by photo‐crosslinking and immobilization onto the nucleophile‐rich aminated PET surfaces. RESULTS: The presence of the immobilized dextran on PET was verified by attenuated total‐reflection Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, scanning electron microscopy and contact angle measurements. The grafted surface was highly hydrophilic due to the heavily hydrated polysaccharide network on the surface as demonstrated by the near zero water contact angle. CONCLUSION: A photochemical method for surface immobilization of dextran onto aminated PET using aryl azide chemistry is a facile technique to generate highly hydrophilic and more hemocompatible surfaces. The aryl nitrenes generated by photolysis produce a metastable, electron‐deficient intermediate, azacycloheptatetraene, which is believed to be responsible for the simultaneous crosslinking of dextran and its immobilization onto the aminated PET surface. The aryl azide chemistry reported here for dextran could be useful as a versatile technique for surface modification of other nucleophile‐rich polymers to create dextran‐ or similar polysaccharide‐immobilized surfaces. Copyright © 2007 Society of Chemical Industry     

Surface modification of polyurethane by plasma-induced graft polymerization of poly(ethylene glycol) methacrylate

A new approach, plasma-induced graft polymerization of poly(ethylene glycol) methacrylate (PEGMA), was used to introduce PEG graft chains with hydroxyl end groups onto a polyurethane (Tecoflex) surface. After argon plasma treatment and subsequent exposure to air, graft polymerization onto Tecoflex films was allowed to proceed in deaerated aqueous solutions of PEGMA at 60°C. The virgin, plasma-treated, and grafted films were characterized comparatively by means of attenuated total reflection infrared spectroscopy, X-ray photoelectron spectroscopy, atomic force microscopy, measurement of contact angle, and protein adsorption. The Tecoflex film undergoes etching during argon plasma treatment, surface oxidation when exposed to air after plasma treatment, and surface restructuring in response to environment upon storage in air. The plasma-induced graft polymerization of PEGMA proved to be successful in introducing PEG graft chains with reactive hydroxyl end groups onto the surface. Grafted films with different surface grafting density of PEG were prepared. Grafted films with higher PEG content exhibit higher hydrophilicity, smoother topography, and lower fibrinogen adsorption. The hydroxyl end groups built onto the surface offer further possibilities of improving its biocompatibility by immobilizing bioactive molecules. © 1996 John Wiley & Sons, Inc.     

Grafting of polyacrylamide from poly(ethylene terephthalate) films

Poly(ethylene terephthalate) (PET) films were modified via the grafting of polyacrylamide (PAAM) onto the surface by surface‐initiated atom transfer radical polymerization and UV‐initiated grafting. The surface composition and morphology of the modified PET films were characterized by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and scanning electron microscopy (SEM). The results show that the surface of the PET film was grafted by PAAM, with its own surface morphology different from that of PET. The properties of the modified PET films were studied by contact‐angle, peeling force, penetrability, haze, and friction factor measurements. The results indicate that the peeling force and friction factor of the modified PET films were higher than those of the unmodified PET film. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Surface modification of poly (ethylene terephthalate) fabric by soy protein isolate hydrogel for wound dressing application

In this study, a composite of poly (ethylene terephthalate) (PET) fabric and soy protein isolate (SPI) hydrogel loaded with gabapentin was developed. For covalent attachment of SPI on the surface of PET fabric, graft polymerization of acrylic acid (AA) on the surface of PET fabric was performed and then carboxyl groups available in the structure of AA were activated using EDAC and then SPI was coated on the surface of PET fabric. The results revealed appropriate connection between hydrogel and modified fabric. The hydrogel was characterized by swelling test and the drug release behavior was investigated. It was found that the casting temperature affects the swelling ratio of the hydrogel and an appropriate release profile of the drug was observed. The surface of fabric was characterized by contact angle measurement, electron microscopy, and infrared spectroscopy. In vitro cell culture study was performed using NIH 3T3 mouse fibroblasts to investigate the biocompatibility of final composite and MTS results along with morphology of cells on the surface of PET fabric coated with SPI revealed the biocompatibility of final product and no cell cytotoxicity was observed in modified PET fabric.     

Modification of polycarbonateurethane surface with poly (ethylene glycol) monoacrylate and phosphorylcholine glyceraldehyde for anti-platelet adhesion

Poly(ethylene glycol) monoacrylate (PEGMA) is grafted onto polycarbonateurethane (PCU) surface via ultraviolet initiated photopolymerization. The hydroxyl groups of poly(PEGMA) on the surface react with one NCO group of isophorone diisocyanate (IPDI) and another NCO group of IPDI is then hydrolyzed to form amino terminal group, which is further grafted with phosphorylcholine glyceraldehyde to establish a biocompatible hydrophilic structure on the surface. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy confirm the successful grafting of both PEG and phosphorylcholine functional groups on the surface. The decrease of the water contact angle for the modified film is caused by synergic effect of PEG and phosphorylcholine, which both have the high hydrophilicity. Furthermore, the number of platelets adhered is relative low on the synergetically modified PCU film compared with the PCU film modified only by poly(PEGMA). Our synergic modification method using both PEG and phosphorylcholine may be applied in surface modification of blood-contacting biomaterials and some relevant devices.     

Surface modification of poly(ethylene terephthalate) film by coating with poly(ethylene glycol)‐grafted polystyrene

The poly(ethylene glycol) (PEG)‐grafted styrene (St) copolymer, which was formed as a nanosphere, was used as an agent to modify the surface of poly(ethylene terephthalate) (PET) film. The graft copolymer was dissolved into chloroform and coated onto the PET film by dip–coating method. The coated amount depends on the content ratios of PEG and St, the solution concentration, and the coating cycles. The graft copolymers having a low molecular weight of PEG‐ or St‐rich content was fairly stable on washing in sodium dodecyl sulfate (SDS) aqueous solution. It was confirmed that the PET surface easily altered its surface property by the coating of the graft copolymers. The contact angles of the films coated with the graft copolymers were very high (ca. 105–120°). The coated film has good antistatic electric property, which agreed with PEG content. The best condition of coating is a one‐cycle coating of 1% (w/v) graft copolymer solution. The coated surface had water‐repellency and antistatic electric property at the same time. The graft copolymer consisted of a PEG macromonomer; St was successfully coated onto PET surfaces, and the desirable properties of both of PEG macromonomer and PSt were exhibited as a novel function of the coated PE film. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1524–1530, 1999     

肝素化聚乙烯醇性能研究

用聚乙烯醇(PVA)缩醛化方法,共价键结合肝素。用Schiff试剂染色法、红外光谱分析、X射线光电子能谱法(ESCA)、元素分析等测试方法证明醛基和肝素的存在。力学性能测定表明,肝素化聚乙烯醇的拉伸强度达到12 25MPa,断裂伸长率为400%。生物学指标说明,在全血凝固时间实验(CT)中,肝素化聚乙烯醇的抗凝时间达3h,在活性部分凝血时间实验(APTT)中,缩醛化聚乙烯醇共价键结合肝素非常牢固,没有肝素脱落到血液中,证明肝素化聚乙烯醇具有显著的抗凝血性。     

Effect of grafting of acrylic acid onto PET film surfaces by UV irradiation on the adhesion of PSAs

To improve the peel strength between a pressure-sensitive adhesive (PSA) and its substrate, grafting of acrylic acid (AA) onto the surface of poly(ethylene terephthalate) (PET) film was carried out. After AA was coated onto the surface of PET films using a spin coater, the coated PET films were irradiated by UV. To investigate the surface chemistry and topography of the PET-g-AA films, the grafted surface of the PET films was characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy (XPS) and scanning probe microscopy (SPM). From these investigations, the effects of grafting of AA at the surface of PET by UV irradiation were discussed. In addition, to determine the effect of grafting on the adhesion between PSA polymer and PET-g-AA films, peel strength was measured after the PSA/PET-g-AA system was cured at various temperatures. As the esterification between PSA polymer and PET-g-AA films occurred in the interfacial region, the peel strength of the PSA/PET-g-AA system generally increased with increasing curing temperature.     

Surface modification of linear low‐density polyethylene film by amphiphilic graft copolymers based on poly(higher α‐olefin)‐graft‐poly(ethylene glycol)

In this article, a series of amphiphilic graft copolymers, namely poly(higher α‐olefin‐co‐para‐methylstyrene)‐graft‐poly(ethylene glycol), and poly(higher α‐olefin‐co‐acrylic acid)‐graft‐poly(ethylene glycol) was used as modifying agent to increase the wettability of the surface of linear low‐density polyethylene (LLDPE) film. The wettability of the surface of LLDPE film could be increased effectively by spin coating of the amphiphilic graft copolymers onto the surface of LLDPE film. The higher the content of poly(ethylene glycol) (PEG) segments, the lower the water contact angle was. The water contact angle of modified LLDPE films was reduced as low as 25°. However, the adhesion between the amphiphilic graft copolymer and LLDPE film was poor. To solve this problem, the modified LLDPE films coated by the amphiphilic graft copolymers were annealed at 110° for 12 h. During the period of annealing, heating made polymer chain move and rearrange quickly. When the film was cooled down, the alkyl group of higher α‐olefin units and LLDPE began to entangle and crystallize. Driven by crystallization, the PEG segments rearranged and enriched in the interface between the amphiphilic graft copolymer and air. By this surface modification method, the amphiphilic graft copolymer was fixed on the surface of LLDPE film. And the water contact angle was further reduced as low as 14.8°. The experimental results of this article demonstrate the potential pathway to provide an effective and durable anti‐fog LLDPE film. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effects of aromatic groups in polymer chains on plasma surface modification

Three polyester films with different repeating units—poly(lactic acid) (PLA), poly(ethylene terephthalate) (PET), and poly(oxybenzoate‐co‐oxynaphthoate) (PBN)—were modified by plasma, and the way in which the chemical compositions of the polymer chains influenced the plasma modification was investigated with contact‐angle measurements and X‐ray photoelectron spectroscopy (XPS). There were large differences in the compensated rates of weight loss among the three polyester films when they were exposed to Ar and O₂ plasmas. The PLA film showed the highest rate for weight loss of the three films, and the PBN film showed the lowest rate. The PET and PBN film surfaces were modified to become more hydrophilic by either argon or oxygen plasma. However, the PLA film surface was not made more hydrophilic by the plasmas. XPS spectra showed that the PLA film surface was not modified in its chemical composition, but the PBN film surface was modified in its chemical composition to form C? O groups in the PBN polymer chains. The reason that the PLA film surface was not modified but the PBN film surface was modified was examined. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 96–103, 2003     

Thermal,Mechanical and Chemical Properties of Hydrophilic Poly(vinyl alcohol) Film Improved by Hydrophobic Poly(propylene glycol)

A series of poly(vinyl alcohol)/poly(propylene glycol) (PVA/PPG) blend films with different PPG contents were prepared by casting the polymer blend solutions. Structure and morphologies of the PVA/PPG blend films were studied by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). Thermal, mechanical, and chemical properties of PVA/PPG blend films were investigated by differential scanning calorimeter (DSC), thermogravimetric analysis (TGA), tensile strength tests, and other physical methods. It was revealed that the introduction of PPG could exert marked effects on the morphology and the properties of PVA film.     

Glycolyzed PET waste and castor oil‐based polyols for two‐pack coating systems

Useful coating products may be obtained by chemical valorization (glycolysis) of post‐consumed poly(ethylene terephthalate) (PET) wastes. Glycolysis of PET waste was carried out using poly(ethylene glycol) (PEG) of various molecular weights (200, 400, 600). The depolymerized oligoesters obtained were transesterified with castor oil which results in the formation of saturated hydroxyl‐functional polyester polyols. Two‐pack coating systems were formulated using these resins as base component and melamine formaldehyde resins as hardener component. Cured films were tested for their mechanical and chemical performances. The glycolysis of PET using PEG and polyester polyol formation was characterized using Fourier transform infrared spectroscopy and the molecular weights were determined using gel permeation chromatography. Copyright © 2006 Society of Chemical Industry     

Surface graft polymerization of ionic monomers onto poly(ethylene terephthalate) by UV-irradiation without degassing

Graft polymerization of anionic and cationic monomers was performed onto the surface of poly(ethylene terephthalate) (PET) film with a simultaneous UV irradiation method, but using no photo-sensitizer. To effect graft polymerization, the PET film was immersed in an aqueous solution containing a monomer and periodate (NaIO₄) of appropriate concentrations, followed by UV irradiation without degassing. The monomers used were 2-acrylamide-2-methylpropane sulfonic acid and acrylic acid as anionic and N,N-dimethyl aminopropyl acrylamide and dimethyl aminoethyl methacrylate as cationic monomer. The role of NaIO₄ at the polymerization was to make the concentration of oxygen dissolved in solution zero by the photochemical reaction with the oxygen. The surface structure of grafted films was characterized by their contact angle, dyeing, X-ray photoelectron spectroscopy, and zeta potentials. Graft polymerization took place, not merely on the outermost surface, but also within the thin surface region of the PET film without any change in bulk properties. © 1993 John Wiley & Sons, Inc.     

Improving the adhesion of poly(ethylene terephthalate) fibers to poly(hydroxyethyl methacrylate) hydrogels by ozone treatment: Surface characterization and pull-out tests

This work reports a methodology to improve the adhesion between poly(ethylene terephthalate) (PET) fibers and poly(hydroxyethyl methacrylate) (pHEMA) hydrogels by treating PET with ozone. The surface chemistry of PET was examined by water contact angle measurements, X-ray photoelectron spectroscopy (XPS), infrared reflection absorption spectroscopy (IRAS) and attenuated total reflectance infrared spectroscopy (ATR-IR) yielding information about the chemical functionalities at depths upon 0.6 μm. Ozone treatment introduces several polar groups in the surface of PET through oxidation and chain scission resulting in increased wettability. These groups include mostly carboxylic and anhydride groups and in small extent hydroxyl groups. Atomic force microscopy (AFM) analysis shows that the surface of ozone-treated PET films is fully covered with spherical particles that are removed after washing the film with water. During the washing step carboxylic functionalities were removed preferentially, as demonstrated by XPS and IR analysis. According to pull-out tests, PET monofilaments and bundles treated by ozone had a higher adhesion to pHEMA hydrogels than untreated ones. The apparent interfacial shear strength is 65% higher on pHEMA hydrogel containing an ozonated than an untreated PET monofilament. In addition, the force to pull-out an ozone-treated PET bundle from pHEMA hydrogel is ca. 81% higher than the one observed for the untreated bundle.     

Grafting polymer from poly(ethylene terephthalate) films by surface‐initiated ATRP

Surface‐initiated atom transfer radical polymerization (ATRP) from poly(ethylene terephthalate) (PET) film was studied. Poly(methyl methacrylate) (PMMA), poly (acrylamide) (PAAM), and their diblock copolymer (PMMA/PAAM) on the surface of PET film were successfully prepared by surface‐initiated ATRP. The structures and properties of the modified PET film were characterized by FT‐IR/ATR, X‐ray photoelectron spectroscopy (XPS), measurements of contact angles, and scanning electronic microscopy (SEM). The results indicate that the surface properties of PET film were greatly improved by grafted polymer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Characterization of poly(vinyl alcohol)/poly(ethylene glycol) hydrogels and PVA-derived hybrids by small-angle X-ray scattering and FTIR spectroscopy

The purpose of this study is to develop novel poly(vinyl alcohol) (PVA)/poly(ethylene glycol) (PEG) hydrogel blends and PVA-derived organic-inorganic hybrid materials and perform nanostructural characterizations. PVA and PEG hydrogels were prepared by dissolving the polymer in aqueous solution, followed by addition of glutaraldehyde (GA) chemical crosslinker. Hybrids were synthesized by reacting PVA in aqueous solution with tetraethoxysilane (TEOS). PVA/TEOS were also modified in the nanometer-scale by crosslinking with GA during the synthesis reaction. Hydrogels and hybrids were characterized by using small-angle X-ray scattering synchrotron radiation (SAXS) and Fourier transform infrared spectroscopy (FTIR). Thin film samples were prepared for SAXS experiments. SAXS results have indicated different nano-ordered disperse phases for hydrogels made of PVA, PEG, PVA/GA, PVA/PEG. Also, PVA/TEOS and PVA/TEOS/GA hybrids have indicated different X-ray scattering patterns. FTIR spectra have showed major vibration bands associated with organic-inorganic chemical groups present in the hybrid nanocomposites PVA/TEOS and PVA/TEOS/GA. PVA/PEG hydrogels and PVA-derived hybrid materials were successfully produced with GA crosslinking in nanometer-scale network.     

Preparation of hydrophilic woven fabrics: Surface modification of poly(ethylene terephthalate) by grafting of poly(vinyl alcohol) and poly(vinyl alcohol)-g-(N-vinyl-2-pyrrolidone)

One of the most industrially important synthetic textile materials, woven poly(ethylene terephthalate) (PET) fabrics, have limitations in the usage of casual apparel applications due to their unwanted hydrophobicity. For that reason, in this study, to impart permanent hydrophilicity to the PET fabrics, hydrophilic poly(vinyl alcohol) (PVA) and a PVA-based copolymer were introduced to the alkaline hydrolysis pretreated PET surface by graft copolymerization for the first time. The graft modification of PET fabric surface was performed with an industrial-adaptable approach. The synthesis of a novel PVA-g-(N-vinyl-2-pyrrolidone) copolymer was achieved by the introduction of glycidyl methacrylate monomer to the PVA backbone. The structure of the copolymer was evidenced by attenuated total reflection–Fourier transform infrared spectroscopy and ¹H-NMR techniques. The introduction of PVA and copolymer structures with desired functional groups to the PET fabric surface was confirmed with the X-ray photoelectron spectroscopy technique. It was obtained that the contact angle–wetting time of PET fabric (145° and 98 s) could be dropped to 37° and 0.1 s and 64° and 0.7 s after PVA and copolymer grafting, respectively. This suggests that the graft-modified PET fabrics may find the potential of use in the textile applications as the alternative hydrophilic materials. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48584.