Microstructural and electrical transport properties of uniaxially pressed $$\text {Bi}_{1.65}\text {Pb}_{0.35}\text {Sr}_2\text {Ca}_{2.5}\text {Cu}_{3.5}\text {O}_{10+\delta }$$ ceramic superconductors

We have studied the effect of the pelletization pressure on microstructural and electrical transport properties of superconducting ceramics with starting composition given by the formula \(\text {Bi}_{1.65}\text {Pb}_{0.35}\text {Sr}_2\text {Ca}_{2.5}\text {Cu}_{3.5}\text {O}_{10+\delta }\). The experimental data of electrical measurements was processed in order to obtain the weak-link resistivity, the orientation probability of the grains’ a-axes along a certain preferential direction, the slope of the linear part in the temperature dependence of the ab-planes resistivity, and the intrinsic effective anisotropy of the grains, of each sample. In contrast with the behaviour of \(\text {Bi}_{1.65}\text {Pb}_{0.35}\text {Sr}_2\text {Ca}_{2}\text {Cu}_{3}\text {O}_{10+\delta }\) ceramics, the Ca, Cu enriched samples exhibit a reduction of their effective anisotropy at sample level and weak links resistivity with increasing compacting pressures. In addition, a compacting pressure of around 488 MPa may affect considerably the electrical and structural parameters of the material. The results suggest that a combined effect of the pelletization pressure and the doping with Ca and Cu can be used to improve the electrical transport properties of these materials for technological applications.     

Effect of Hafnium Impurities on the Magnetoresistance of $$\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\delta }$$

In the present study, we investigate the influence of the hafnium (Hf) impurities on the magnetoresistance of \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\delta }\) ceramic samples in the temperature interval of the transition to the superconducting state in constant magnetic field up to 12 T. The cause of the appearance of low- temperature “tails” (paracoherent transitions) on the resistive transitions, corresponding to different phase regimes of the vortex matter state is discussed. At temperatures higher than the critical temperature (T > \(T_\mathrm{c})\), the temperature dependence of the excess paraconductivity can be described within the Aslamazov–Larkin theoretical model of the fluctuation conductivity for layered superconductors.     

Superconducting epitaxial $$\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\delta }$$ on $$\hbox {SrTiO}_{3}$$SrTiO3-buffered Si(001)

Thin films of optimally doped(001)-oriented \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\updelta }\) are epitaxially integrated on silicon(001) through growth on a single crystalline \(\hbox {SrTiO}_{3}\) buffer. The former is grown using pulsed-laser deposition and the latter is grown on Si using oxide molecular beam epitaxy. The single crystal nature of the \(\hbox {SrTiO}_{3}\) buffer enables high quality \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\updelta }\) films exhibiting high transition temperatures to be integrated on Si. For a 30-nm thick \(\hbox {SrTiO}_{3}\) buffer, 50-nm thick \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\updelta }\) films that exhibit a transition temperature of \(\sim \)93 K, and a narrow transition width (<5 K) are achieved. The integration of single crystalline \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\updelta }\) on Si(001) paves the way for the potential exploration of cuprate materials in a variety of applications.     

Inhomogeneity Induced Conductivity Fluctuation in YBa2Cu3O7−y /Cr2O3 Composite

Dimensional fluctuations of superconducting order parameters in YBa₂Cu₃O_7?y +xCr₂O₃ (x=0.0, 2.3, 4.4, and 6.1 wt.%) has been analyzed. SEM micrographs reveal the reduced grain size with the incorporation of magnetic Cr₂O₃ particles in the YBCO matrix. XRD graphs show the unchanged orthorhombic structure and improved oxygen ordering in the composite samples. With the increase of Cr₂O₃ wt.%, it is found that the superconducting transition temperatures determined from standard four-probe method decreases gradually. Excess conductivity fluctuation analysis using Aslamazov–Larkin model fitting reveals transition of two dominant regions (2D and 3D) above T _c . 2D to 3D crossover temperature, i.e., Lawerence–Doniach temperature that demarcates dimensional nature of fluctuation inside the grains is influenced by Cr₂O₃ incorporation in YBCO matrix. The decrease in Lawerence–Doniach temperature in the mean field region has been observed as a consequent dominance of the 3D region with an increase in wt.% of Cr₂O₃ in the composite.     

Evolution of the electrical resistance of \bf{\hbox {YBa}_2\hbox {Cu}_3\hbox {O}_{7-\varvec\delta }} single crystals in the course of long-term aging

Investigated are the changes in the basal-plane electrical resistivity of an optimally doped \(\hbox {YBa}_2\hbox {Cu}_3\hbox {O}_{7-\delta }\) single crystal in the course of long-term aging (17 years) at room temperature in air. In consequence of aging the sample has decomposed into three phases with different temperatures of the superconducting transition, while the transition widths of these phases have increased significantly. The temperature dependence of the electrical resistivity has retained a metallic character. The fluctuation conductivity near the critical temperature is described well by the 3D Aslamazov–Larkin model. In the course of aging significant changes in the scattering characteristics have been observed, whereas the Debye temperature has changed slightly and the transverse coherence length has remained constant.     

Inhomogeneous Superconducting Behaviour in $$\hbox {La}_{5}\hbox {Ni}_{2}\hbox {Si}_{3}$$

The superconducting phase transition at \(T_\mathrm{c} = 2.3\) K was observed for the electrical resistivity \(\rho ({T})\) and magnetic susceptibility \(\chi (T)\) measurements in the ternary compound La\(_{5}\hbox {Ni}_{2}\hbox {Si}_{3}\) that crystallizes in the hexagonal-type structure. Although a single-phase character with the nominal stoichiometry of the synthesized sample was confirmed, a small trace of the La–Ni phase was found, being probably responsible for the superconducting behaviour in the investigated compound. The magnetization loop recorded at \({T} = 0.5\) K resembles a star-like shape which indicates that the density of the critical current can be strongly suppressed by a magnetic field. The low-\(T _{\rho }(T)\) and specific heat \({C}_\mathrm{p}({T})\) data in the normal state reveal simple metallic behaviour. No clear evidence of a phase transition to any long- or short-range order was found for \(C_\mathrm{p}(T)\) measurements in the T-range of 0.4–300 K.     

Theoretical Investigations on Electrocaloric Properties of \mathrm{PbZr}_{0.95}\mathrm{Ti}_{0.05}\mathrm{O}_{3} Thin Film

Based on a phenomenological model, the electrocaloric effect (ECE) accompanied with the ferroelectric-to-paraelectric phase transition in a PbZr $_{0.95}$ 0.95 Ti $_{0.05}$ 0.05 O $_{3}$ 3 thin film was investigated. The extracted data reveal many features of the ECE such as electrocaloric entropy changes, heat capacity changes, and temperature changes as functions of temperature due to different electric fields shifts. From the behavior of the PbZr $_{0.95}$ 0.95 Ti $_{0.05}$ 0.05 O $_{3}$ 3 thin film in phase transitions, it leads to a large change of heat capacity of 105.94 J  ${\cdot }\,$ · kg ${^{-1}}\,{\cdot }\,{^{\circ }}$ ? 1 · ° C, a temperature change of 22.44 K, and a relative cooling power of 1469 J  ${\cdot }$ ·  kg $^{-1}$ ? 1 .     

Radiative Properties of Ceramic $$\hbox {Al}_{2}\hbox {O}_{3}$$, AlN,and $$\hbox {Si}_{3}\hbox {N}_{4}$$Si3N4: I. Experiments

The radiative properties of dense ceramic \(\hbox {Al}_{2}\hbox {O}_{3}\), AlN, and \(\hbox {Si}_{3}\hbox {N}_{4}\) plates are investigated from the visible to the mid-infrared region at room temperature. Each specimen has different surface finishings on different sides of the laminate. A monochromator was used with an integrating sphere to measure the directional-hemispherical reflectance and transmittance of these samples at wavelengths from 0.4 \(\upmu \hbox {m}\) to 1.8 \(\upmu \hbox {m}\). The specular reflectance was obtained by a subtraction technique. A Fourier-transform infrared spectrometer was used to measure the directional-hemispherical or specular reflectance and transmittance with appropriate accessories from about 1.6 \(\upmu \hbox {m}\) to 19 \(\upmu \hbox {m}\). All measurements were performed at near-normal incidence on either the smooth side or the rough side of the sample. The experimental observations are qualitatively interpreted considering the optical constants, surface roughness, and volume scattering and absorption.     

Investigation on the impact and compression behavior of wet \upgamma -\hbox {Al}_{2}\mathrm{O}_{3} granules

The material behavior of dominant elastic–plastic \(\upgamma \) - \(\hbox {Al}_{2}\mathrm{O}_{3}\) granules has been experimentally studied by means of quasi static compression tests and dynamic impact tests until fracture. The obtained distributions of breakage velocity and specific breakage energy are compared. Thus, velocity dependent influences at stressing like viscous behavior can be derived. Additionally, the influences of particle size and moisture content on the material behavior are investigated.     

Synthesis,structure and thermoelectric properties of $$\mathrm{La}_{1-x}\mathrm{Na}_{x}\mathrm{CoO}_{3 }$$ perovskite oxides

Monovalent ion doped lanthanum cobaltate \(\hbox {La}_{1-x}\hbox {Na}_{x}\hbox {CoO}_{3 }\) (\(0 \le x \le 0.25\)) compositions were synthesized by the nitrate–citrate gel combustion method. All the heat treatments were limited to below 1123 K, in order to retain the Na stoichiometry. Structural parameters for all the compounds were confirmed by the Rietveld refinement method using powder X-ray diffraction (XRD) data and exhibit the rhombhohedral crystal structure with space group R-3c (No. 167). The scanning electron microscopy study reveals that the particles are spherical in shape and sizes, in the range of 0.2–0.5 \(\upmu \)m. High temperature electrical resistivity, Seebeck coefficient and thermal conductivity measurements were performed on the high density hot pressed pellets in the temperature range of 300–800 K, which exhibit p-type conductivity of pristine and doped compositions. The X-ray photoelectron spectroscopy (XPS) studies confirm the monotonous increase in \(\hbox {Co}^{4+}\) with doping concentration up to \(x = 0.15\), which is correlated with the electrical resistivity and Seebeck coefficient values of the samples. The highest power factor of \(10~\upmu \hbox {W~mK}^{-2 }\) is achieved for 10 at% Na content at 600 K. Thermoelectric figure of merit is estimated to be \({\sim }1 \times 10^{-2}\) at 780 K for 15 at% Na-doped samples.     

Characterization and optical properties of $$\hbox {Pr}_{2}\hbox {O}_{3}$$-doped molybdenum lead-borate glasses

\(\hbox {Pr}^{3+}\) doped molybdenum lead-borate glasses with the chemical composition 75PbO?[25–(x \(+\) y)\(\hbox {B}_{2}\hbox {O}_{3}]\)–\(y\hbox {MoO}_{3}\)–\(x\hbox {Pr}_{2}\hbox {O}_{3}\) (where \(x = 0.5\) and 1.0 mol% and \(y = 0\) and 5 mol%) were prepared by conventional melt-quenching technique. Thermal, optical and structural analyses are carried out using DSC, UV and FTIR spectra. The physical parameters, like glass transition \((T_{\mathrm{g}})\), stability factor \((\Delta T)\), optical energy band gap \((E_{\mathrm{gopt}})\), of these glasses have been determined as a function of dopant concentration. The \({T}_{\mathrm{g}}\) and optical energy gaps of these glasses were found to be in the range of 290–350\({^{\circ }}\hbox {C}\) and 2.45–2.7 eV, respectively. Stability of the glass doped with \(\hbox {Pr}^{3+}\) is found to be moderate (\(\sim \)40). The results are discussed using the structural model of Mo–lead-borate glass.     

Chemical synthesis and characterization of nano-sized rare-earth ruthenium pyrochlore compounds $$\hbox {Ln}_{2}\hbox {Ru}_{2}\hbox {O}_{7}$$ (Ln = rare earth)

The rare-earth ruthenium pyrochlores \(\hbox {Ln}_{2}\hbox {Ru}_{2}\hbox {O}_{7}\) (\(\hbox {Ln} = \hbox {La}^{3+}\), \(\hbox {Pr}^{3+}\), \(\hbox {Nd}^{3+}\), \(\hbox {Sm}^{3+}\) and \(\hbox {Gd}^{3+}\)) have been synthesized by the tartrate co-precipitation method, which allowed control of their composition and morphology. The preparation processes were monitored by thermal studies (TG-DTA). The obtained ruthenates were characterized by X-ray diffraction (XRD), TEM, d.c. electrical conductivity, thermoelectric power and dielectric constant measurements. X-ray diffraction patterns for all pyrochlore samples indicate a single-phase crystalline material with a cubic structure except for \(\hbox {LaRuO}_{3}\), which shows perovskite orthorhombic structure. The structural parameter for the solid obtained was successfully determined by Rietveld refinement based on the analysis of powder XRD pattern. The TEM photographs of these compounds exhibited the average particle size in the range of 36.4–73.8 nm. The data on the temperature variation of d.c. electrical conductivity showed that all rare-earth ruthanates are semiconductors and major carriers are electrons. The conduction mechanism of these compounds seems to be oxygen non-stoichiometry. The variation of dielectric constant at various frequencies showed initially interfacial polarization up to 275 kHz and beyond, which shows domain wall motion.     

Fluctuation conductivity in Li-doped YBa2Cu3O7−x

The paraconductivity of Li-doped YBa₂Cu₃O_7?x was measured. We have found that the character of the fluctuation changes as lithium content increases: instead of a crossover from 2D to 3D behavior (D is the dimensionality), as we have observed for a low doping level, a double crossover to the 2D percolative and 3D percolative regimes becomes manifest by increasing the lithium content.     

Synthesis,characterization and electrochemical performance of $$\hbox {Li}_{2}\hbox {Ni}_{x}\hbox {Fe}_{1-x}\hbox {SiO}_{4}$$ cathode materials for lithium ion batteries

\(\hbox {Li}_{2}\hbox {Ni}_{x}\hbox {Fe}_{1-x}\hbox {SiO}_{4}\) (\(x = 0\), 0.2, 0.4, 0.6, 0.8 and 1) samples were prepared by a sol–gel process. The crystal structure of prepared samples of \(\hbox {Li}_{2}\hbox {Ni}_{x}\hbox {Fe}_{1-x}\hbox {SiO}_{4}\) was characterized using an X-ray diffractometer. Different crystallographic parameters such as crystallite size and lattice cell parameters have been calculated. Scanning electron microscopy and Fourier transform infrared spectroscopy investigations were carried out, which reveal the morphology and function groups of the synthesized samples. Furthermore, electrochemical impedance spectra measurements are performed. The obtained results indicated that the highest conductivity is achieved for the \(\hbox {Li}_{2}\hbox {Ni}_{0.4}\hbox {Fe}_{0.6}\hbox {SiO}_{4}\) electrode compound. It was observed that Li–\(\hbox {Li}_{2}\hbox {Ni}_{0.4}\hbox {Fe}_{0.6}\hbox {SiO}_{4}\) battery has initial discharge capacity of 164 mAh \(\hbox {g}^{-1}\) at 0.1C rate. The cycle life performance of all \(\hbox {Li}_{2}\hbox {Ni}_{x}\hbox {Fe}_{1-x}\hbox {SiO}_{4}\) batteries ranged between 100 and 156 mAh \(\hbox {g}^{-1}\) with coulombic efficiency range between 70.9 and 93.9%.     

Microwave-hydrothermal synthesis of mesoporous $$\upgamma $$-$$\hbox {Al}_{2}\hbox {O}_{3}$$Al2O3 and its impregnation with AgNPs for excellent catalytic oxidation of CO

Mesoporous \(\upgamma \)-alumina was synthesized by the microwave-hydrothermal process with a shorter duration time at 150\({^{\circ }}\)C/2 h followed by calcination at 550\({^{\circ }}\)C/1 h. Ag nanoparticles (AgNPs) were impregnated into \(\upgamma \)-alumina under a reducing atmosphere at 450\({^{\circ }}\)C. The synthesized product was characterized by X-ray diffraction (XRD), thermogravimetric (TG)/differential thermal analysis (DTA), X-ray photoelectron spectroscopy (XPS), \(\hbox {N}_{2}\) adsorption–desorption study, field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). The BET surface area values of \(\upgamma \)-alumina and Ag-impregnated \(\upgamma \)-alumina were found to be 258 and 230 m\(^{2}\) g\(^{-1}\), respectively. FESEM images showed the formation of grain-like particles of 50–70 nm in size with a flake-like microstructure. The XRD, XPS and TEM studies confirmed the presence of Ag in the synthesized product. Catalytic properties of the product for CO oxidation was studied with the \(T_{50}\) (50% conversion) and \(T_{100}\) (100% conversion) values of 118 and 135\({^{\circ }}\)C, respectively; the enhanced values were compared with the literature reported values.     

Structures and electronic properties of $$\hbox {W}_{m}\hbox {Cu}_{n}\,(n + m \le 7)$$ clusters

Geometric and electronic structures of \(\hbox {W}_{m}\hbox {Cu}_{n}\, (m + n \le 7)\) cluster have been systematically calculated by density functional theory at the generalized gradient approximation level for ground-state structures. \(\hbox {W}_{m}\hbox {Cu}_{n}\) clusters with \(n = 1, 3, 5\) tend to form bipyramid structures, whereas \(\hbox {WCu}_{n}\) favour planar shapes except for \(\hbox {WCu}_{5}\). The configurations of \(\hbox {W}_{m}\hbox {Cu}_{n}\) clusters are more sensitive to the Cu atoms than the W atoms, while the average atomic binding energies and the total magnetic moments are determined by W atoms. The calculated second-order differences in energies and HOMO–LOMO energy gaps show pronounced odd–even oscillating behaviours. From the Mulliken electron population analysis, we found that Cu 4p and W 6p orbitals exhibit electronic charges and both Cu 4s and W 6s orbitals transfer electronic charges to the W 5d orbital, which lead to the extension of W–Cu bond lengths.