Influence of konjac flour on foaming properties of milk protein concentrate and quality characteristics of gluten‐free cookie

The effects of konjac flour (KF) for modifying the foaming properties of milk protein concentrate (MPC) and characteristics of gluten‐free rice cookies were investigated. The three variables of konjac concentration (0.1–0.4%), pH (pH 5–9) and NaCl concentration (0.2–0.6 м) were studied. Both KF and pH had considerable effects on the foaming capacity (FC) and foaming stability (FS) of MPC. The NaCl had a negligible effect. Lowered FC and FS observed at pH 9 and pH 5 were increased with the increase in KF addition. Batter characteristics (flowability and consistency), cookie quality (moisture, yield, spread ratio, specific volume, hardness and colour) and sensory acceptance were evaluated in gluten‐free cookies with 0%, 0.25% and 0.4% KF. Konjac supplementation increased batter characteristics, yield, specific volume and hardness, but decreased lightness. Panellist acceptance, especially regarding texture and overall acceptability, increased in gluten‐free cookies with 0.4% KF. A higher purchasing decision was found for cookies with added KF.     

Effect of the shape of rice starch granules on flour characteristics and gluten‐free bread quality

The effect of three different rice varieties with different starch shapes (Seolgaeng (SG), round starch structure; Samkwang (SK), polygonal starch structure and Boramchan (BRC), polygonal starch structure) on rice flour characteristics and gluten‐free bread baking quality was investigated. Rice flours were produced by dry milling and passed through a 200 mesh sieve. Electron microscopy revealed that the structure of SG grains, with round starch granules, possessed larger void spaces than SK and BRC, composed of polygonal starch granules. For this reason, SG grain had low grain hardness and consequently, it was milled to a fine flour with low damaged starch content. The thermo‐mechanical properties were determined by Mixolab, which revealed that SG was gelatinised rapidly and maintained high viscosity after gelatinisation. These characteristics gave SG flour the ability to build up bread structure without gluten. Specific volume and crumb hardness of gluten‐free rice breads made of SG, SK and BRC flours were 3.37, 3.11 and 2.12 mL g^?1 and 2.61, 2.76 and 6.46 N, respectively. The SG flour with round starch structure is appropriate for making gluten‐free rice breads.     

Diversity among maize populations from Spain and the United States for dough rheology and gluten‐free breadmaking performance

Maize is used for bakery and for gluten‐free food for coeliac patients. Our objective was assessing diversity for dough rheology and breadmaking in maize with different origins, grain types and growth cycles. Endosperm type affected bread crumb colour having dent maize higher L* and a* and instant recovery speed. Population origin affected flotation index, onset pasting temperature, bread crumb colour, hardness and instant recovery speed. Finally, growth cycle affected flotation index, crumb colour L* and a* and cohesiveness. Water‐binding capacity, crumb colour and hardness were the most discriminative parameters for maize. The maize population Andaluz/Daxa was the less distant from wheat parameters, and Tremesino was the most different.     

Influence of phosphorylated rice flour on the quality of gluten‐free bread

The chemical modification of rice flour by phosphorylation is an alternative to improve the technological quality of bakery products. The aim of this study was to investigate the effect of phosphorylation process of rice flour on technological properties (specific volume, crumb and crust colour) of gluten‐free breads and the hardening of these breads during two storage temperatures (21 °C and ?24 °C). Breads were made with native rice flour, with phosphorylated rice flour and with wheat flour, used as control. The phosphorylation causes significant reduction in the synaeresis of pastes and in retrogradation tendency of rice flours, varying from 258.7 cP (native rice flour) to 122 cP (phosphorylated rice flour). The breads prepared with phosphorylated rice flour showed reduction in the hardness in both storage temperatures studied and effect on rice bread volume, crumb appearance and colour, demonstrating the possibility of use of the phosphorylated rice flour in gluten‐free breads.     

Batter rheology and bread texture of sorghum‐based gluten‐free formulations modified with native or pregelatinised cassava starch and α‐amylase

The influence of α‐amylase (0–0.3 U g^?1) on the crumb properties of gluten‐free sorghum batter and bread, respectively, was investigated. The formulations were modified using native or pregelatinised cassava starch (i.e. batter A – 17% pregelatinised starch, 83% sorghum, 100% water fwb; batter B – 17% native starch, 83% sorghum, 100% water fwb; and batter C – 30% native starch, 70% sorghum, 80% water fwb). The batters had solid viscoelastic character with the storage modulus predominant over the loss modulus. Storage moduli of batter A decreased with increasing angular frequency, whereas the moduli of batters B and C were independent from the angular frequency. Increasing enzyme concentration did not affect the loss factors of the batters. Batters’ resistance to deformation, from highest to lowest, followed the order C > A > B. Increasing enzyme concentration decreased crumb firmness, cohesiveness, springiness, resilience and chewiness but increased adhesiveness. Overall, breads containing native starch had better crumb properties (i.e. springier and less firm, chewy and adhesive) than breads containing pregelatinised starch.     

Improvement of the quality of gluten‐free sponge cake using different levels and particle sizes of carrot pomace powder

In this study, carrot pomace powder (CPP) with particle sizes of 210 μm (CPP210) and 500 μm (CPP500) was added in the gluten‐free sponge cake recipe. Flour (rice and corn flour, 1:1, w/w) was replaced with 0, 10, 20 and 30% CPP. With increasing the level and particle size of CPP, batter density, viscosity, consistency and firmness increased. The control cake had a dense, hard texture, irregular shape and low sensory scores. These properties improved with addition of CPP so that the cake density, hardness and cohesiveness reduced, while symmetry index and sensory scores increased. Varying the particle size of CPP had no considerable effects on most of the batter and cake properties, while increasing the level of CPP had great positive effects on the quality of batter and cake. Overall, addition of 30% CPP with either of the particle sizes resulted in an acceptable gluten‐free cake.     

Effect of adding fresh and freeze‐dried buckwheat sourdough on gluten‐free bread quality

This study demonstrates new possibilities in using freeze‐dried buckwheat sourdoughs in the processing of gluten‐free bread (GFB). Fresh and freeze‐dried (at temperatures of 20, 40 and 60 °C) sourdoughs were added in the amounts of 10, 20, 30 and 40% of the total flour content. Significant and beneficial changes in the quality of bread under the influence of different quantities of fresh and freeze‐dried sourdoughs additive were observed. Freeze‐dried buckwheat sourdoughs at the level of 20 and 30% gave the best baking results for GFB. pH of bread significantly changed, which had a positive effect on increasing its suitability for the storage. Buckwheat sourdough dried at 40 °C is the most highly recommended for GFB processing. Higher temperatures (60 °C) caused the least change in bread volume; however, a bitter aftertaste from burning was slightly detectable. Freeze‐dried buckwheat sourdoughs can be used directly in processing, thus eliminating the long fermentation of sourdough.     

Production of gluten‐free bread using soybean flour

The effect of soybean flour on gluten‐free bread quality was studied. Full‐fat enzyme‐active, semiactive and inactive soybean flours were evaluated. Active soybean flour improved the volume and structure of gluten‐free bread, while semiactive and inactive soybean flours did not have positive effects on bread quality. The particle size and concentration of the soybean flours also affected bread quality. Levels of addition between 125 and 150 g kg^?1 and particle sizes between 90 and 120 µm of active soybean flour yielded the best results. Heating the active soybean flour destroyed its improving effect. The analysis of proteins by sodium dodecyl sulphate polyacrylamide gel electrophoresis and size exclusion chromatography showed that heating soybean flour at 60–200°C caused protein aggregation. The overall results indicated that the addition of active soybean flour improved gluten‐free bread quality, and this effect seemed to be due to both the structural proteins and the enzymatic activities of the soybean flour. Copyright © 2004 Society of Chemical Industry     

Effect of green plantain flour addition to gluten‐free bread on functional bread properties and resistant starch content

Green plantain flour (GPF) was used as a functional ingredient to produce gluten‐free (GF) bread based on a flour blend of rice flour and GF wheat starch (50:50) to improve their functional properties and to increase their resistant starch (RS) content. In pretrials, an addition of up to 30% GPF provided acceptable bread quality with maximum RS content. Based on these trials, two 2³ factorial screening experimental designs were applied, where water content, baking temperature and baking time of GF bread containing 30% GPF addition were optimised. The best baking conditions to achieve satisfying GF bread quality – higher loaf volume, softer crumb firmness and regular porosity structure at the highest RS content could be defined to a maximum addition of water at 160%, baking temperature of 180 °C and baking time of 90 min. The incorporation of GPF showed good potential to improve the quality of GF bread.     

From wheat sourdough to gluten‐free sourdough: a non‐conventional process for producing gluten‐free bread

Gluten‐free (GF) sourdough was prepared from wheat sourdough and analysed both in fresh (GFS) and dried forms (DGFS). The gluten content in each GF sourdough sample was <20 mg kg^?1. The dough leavening capacity and the properties of the bread samples were investigated and compared to those of bread prepared using bakery yeast (Saccharomyces cerevisiae). Two commercial rice‐based mixtures (different for the presence/absence of buckwheat flour) were used to prepare bread samples. In GFS, lactic acid bacteria (LAB) and yeasts were found in amounts corresponding to 10⁸ and 10⁷ CFU g^?1, respectively, whereas both LAB and yeasts were detected in lower amounts (about 10⁶ CFU g^?1) in DGFS. When used in bread‐making, both GFS types produced significant dough acidification and exhibited good dough development during proofing, resulting in loaves with specific volume values between 3.00 and 4.12 mL g^?1, values similar to those obtained for reference bread (3.05÷4.15 mL g^?1). The use of GFS was effective in lowering the bread staling rate during storage for up to 7 days.     

Optimisation of formulations and infrared–microwave combination baking conditions of chestnut–rice breads

The main objective of this study was to design gluten‐free breads containing chestnut and rice flour and xanthan–guar gum blend to be baked in infrared–microwave combination oven. Response surface methodology (RSM) was used to optimise gluten‐free bread formulations and processing conditions. Weight loss, firmness, specific volume and colour change of the breads were determined. Rice flour mixed with different proportions of chestnut flour and different emulsifier contents were used to prepare breads. The gluten‐free formulations were baked using different upper halogen lamp powers, microwave powers and baking time which were varied from 40% to 80%, 30% to 70% and 9 to 17 min, respectively. Gluten‐free breads and wheat breads baked in conventional oven were used for comparison. Breads containing 46.5% chestnut flour and 0.62% emulsifier and baked using 40% infrared and 30% microwave power for 9 min had statistically comparable quality with conventionally baked ones.     

Effect of hydrocolloids on gluten‐free batter properties and bread quality

The objectives of this study were to assess the effect of the addition of different hydrocolloids on gluten‐free batter properties and bread quality and to obtain information about the relationship between dough consistency and bread quality. Breads were made of rice, corn and soy flours and 158% water. Following hydrocolloids were added: carrageenan (C), alginate (Al), xanthan gum (XG), carboxymethylcellulose (CMC) and gelatine (Gel). Batter consistency, bread specific volume (SV), crumb analysis, crust colour, crumb hardness and staling rate were determined. Hydrocolloids increased batter consistencies: the highest value was obtained with XG, which doubled that of control batter, followed by CMC. Breads with hydrocolloid presented higher SV than control, especially with XG whose SV was 18.3% higher than that of control bread. A positive correlation was found between SV and batter consistency (r = 0.94; P < 0.05). Crumbs with Gel, XG and CMC presented higher cell average size. XG and CMC crumbs looked spongier. Breads containing hydrocolloid evidenced lighter crusts. Crumb firmness was decreased by XG and CMC addition, and staling rate was slower. Overall, XG was the hydrocolloid that most improved gluten‐free bread quality. These results show that, in formulations with high water content, batter consistency is strongly associated with bread volume.     

Rheology and bread‐making performance of gluten‐free formulations affected by different levels of sugar beet fibre,hydroxypropylmethylcellulose and water

This study investigated the application of hydroxypropylmethylcellulose (HPMC) (2%, 3%, 4%), sugar beet fibre (SBF) (3%, 5%, 7%) and water (210%, 220%, 230%) into maize‐based gluten‐free (GF) formulations and their effects on the GF batter rheology and bread quality. HPMC incorporation in higher amounts reduced the compliance values of GF batter samples and increased the values of dynamic moduli indicating an improvement in the GF batter elastic characteristic. The same course of action with a less pronounced influence on mentioned rheological parameters had SBF addition. GF bread quality evaluation in terms of specific loaf volume and crumb texture (hardness, cohesiveness and springiness) reveals that HPMC and SBF incorporation at higher levels enhanced these quality parameters. The inclusion of HPMC and SBF coupled with adequate water content can improve the nutritional value of GF bread without negative influence on bread quality.     

Antioxidative and reducing capacity,macroelements content and sensorial properties of buckwheat‐enhanced gluten‐free bread

Common buckwheat flour (BF) was used to substitute 10%, 20%, 30% and 40% of corn starch, the main component of a gluten‐free bread formula, to make buckwheat‐enhanced gluten‐free breads. The 40% BF‐enhanced gluten‐free bread showed the highest antioxidant capacity against ABTS⁺˙ and DPPH˙ radicals (4.1 and 2.5 μmol Trolox g^?1 DM, respectively) and reducing capacity measured by cyclic voltammetry (1.5 μmol Trolox g^?1 DM). The antioxidant and reducing capacity of buckwheat‐enhanced gluten‐free breads were positively correlated with their total phenolic contents (r = 0.97). The 40% BF‐enhanced gluten‐free bread showed the highest overall sensory quality (7.1 units) when compared to control gluten‐free bread (1.8 units). The linear relationship between applied increasing BF doses in gluten‐free bread formula and magnesium, phosphorus and potassium content in breads was noted. It was concluded that 40% BF‐enhanced gluten‐free bread could be developed and dedicated to those people suffering from coeliac disease.