共查询到20条相似文献,搜索用时 109 毫秒
1.
3G无线传播模型校正 总被引:5,自引:0,他引:5
介绍了3G模型校正中CW测试方法和原理、模型校正的方法、模型校正的最小二乘法原理及评判模型正确与否的标准,最后给出了一个传播模型校正实例。 相似文献
2.
3.
WCDMA无线传播模型校正 总被引:3,自引:0,他引:3
传播模型的准确对小区的合理规划是十分重要的。利用CW测试获得的数据与数字地图对传播模型进行校正。介绍了单变量校正法和多变量校正法,最后给出了一个传播模型校正实例。 相似文献
4.
5.
6.
建立了XCounter Flite X1型光子计数探测器的响应函数模型。利用X射线荧光作为射线源,通过蒙特卡罗方法,模拟了入射能谱与探测器材料中的能量沉积能谱。响应函数包括高斯函数与经验型的修正函数,修正函数由直线段构成,通过最小二乘的方法来确定其中的参数,探测器像素不一致性的校正包括阈值校正与响应函数的校正。把经过校正的模型结果与实验结果对比并计算平均误差,得到在各能量段下误差都小于2.5%的结果,利用该响应函数进行能谱恢复与材料分解,两者具有比较理想的结果,充分说明了该校正方法的有效性与准确性。 相似文献
7.
介绍了双极工艺基区和发射区结构模拟所涉及的物理模型,包括与单种工艺有关的杂质分凝模型、硼的间隙扩散模型及高浓度磷扩散模型等。特别分析了与多步工艺有关的点缺陷模型及其模拟校正过程,最后给出了模型校正的应用。 相似文献
8.
传播模型校正是网络规划中关键的环节,本文首先介绍了传播模型校正的原理和方法,并对传播模型校正中CW测试数据的预处理进行了分析,进一步以实际网规工具中应用的实例分析了传播模型校正中的关键点,对实际的网络规划提出了指导。 相似文献
9.
本文简要介绍了移动通信中传播模型的概念和几种常用的传播模型,论述了模型校正的必要性,并详细介绍了模型校正的步骤,同时对模型校正中可能出现的误差进行了分析. 相似文献
10.
红外焦平面探测器响应非线性的测定 总被引:15,自引:0,他引:15
提出了一种定量红外焦平面探测器响应非线性的实验方法。通过实验获得探测器输出电压与辐射到光敏元上的辐射通量数据,进而进行曲线拟合,得到了红外探测器的响应非线性曲线——“S型曲线”,并且尝试建立了它的非线性数学模型。基于这种非线性模型,提出了一种新的校正思路——基于光敏元响应非线性的非均匀校正方法。这种校正思路较现有的温度定标校正算法更忠实于光敏元的真实特性,因而能达到更高校正精度。计算机仿真结果表明,根据响应非线性曲线进行校正的精度能提高到两点校正算法的3倍左右。 相似文献
11.
测试过程模型定义了测试的流程和方法,为测试管理提供了指导。但这些模型各有长短,并没有哪种模型能够完全适合于所有的测试项目,在实际测试中应该吸取各模型的长处,归纳出合适的测试管理理念。 相似文献
12.
13.
14.
无线传播模型是用来对无线电波的传播特性进行预测的一种模型。传播特性的预测是无线网络规划的基础,其准确性影响到网络规划的准确性和质量。本文针对连续波测试传播模型校正方法所存在的低效率和低准确性等问题,提出了一种利用现网路测数据进行传播模型校正的方法,从理论上证明了路测信号可以替代连续波测试信号用于传播模型校正。本文使用校正的传播模型是SPM模型。 相似文献
15.
16.
17.
Érika Cota Luigi Carro Marcelo Lubaszewski Alex Orailoğlu 《Journal of Electronic Testing》2004,20(4):357-373
This paper proposes a comprehensive model for test planning and design space exploration in a core-based environment. The proposed approach relies on the reuse of available system resources for the definition of the test access mechanism, and for the optimization of several cost factors (area overhead, pin count, power constraints and test time). The use of an expanded test access model and its concurrent definition with the system test schedule makes it possible the search for a cost effective global solution. Experimental results over the ITC'02 SOC Test Benchmarks show the variety of trade-offs that can be explored using the proposed model, and its effectiveness on optimizing the system test planning. 相似文献
18.
The paper presents two functional fault models that are applied for functional delay test generation for non-scan synchronous sequential circuits: the pin pair state (PPS) fault model and the pin pair full state (PPFS) fault model. The PPS fault model deals with the pairs of stuck-at faults on the primary inputs and the primary outputs, as well as, with the pairs of stuck-at faults on the previous state bits and the primary outputs. The PPFS fault model encompasses the PPS model, and additionally deals with the pairs of stuck-at faults on the primary inputs and the next state bits, as well as, with the pairs of stuck-at faults on the previous state bits and the next state bits. The main factor in assessing the quality of obtained test sequences was the transition fault coverage at the gate level of the selected according to the appropriate fault model test sequences from the generated randomly ones. The experimental results demonstrate that the implementation using presented functional fault models allow selecting the test sequences from the initial test set without the loss of transition fault coverage in many cases, and the number of the selected test sequences is much lesser than that of the initial test set. This result demonstrates that the functional delay test can be generated using the presented functional delay fault models before structural synthesis of the circuit. 相似文献
19.
电子装备试验系统的灰色特性研究 总被引:1,自引:0,他引:1
电子装备试验中存在很多信息不完全、不确定及数据少等不确定性决策问题,灰色系统理论是解决这种贫信息问题的有力工具。该文首先总结了电子装备试验系统的组成、传统意义下的试验系统特性;进而从系统的角度,提出了试验系统具有结构灰性、关系灰性、模型灰性、认知灰性等灰色特征;最后研究了试验数据的不确定性来源及其灰色表现形式,并给出了试验数据的不确定性度量和系统不确定性的平均度量数学模型。研究结论可为扩展利用灰色系统理论分析解决电子装备试验系统中的各种不确定性问题提供理论支撑。 相似文献