Removal of Acid Violet 17 from Aqueous Solutions by Adsorption onto Activated Carbon Prepared from Pistachio Nut Shell

Adsorbents prepared from pistachio nut shell, an agricultural waste biomass, were successfully used to remove Acid Violet 17 from an aqueous solution. The activated carbons PNS1, PNS2, and PNS3 were characterized by scanning electron microscope (SEM), Fourier Transform – Infra Red spectroscopy (FTIR) and (BET). The effect of pH, adsorbent dosage, and temperature on dye removal was studied. Maximum color removal was observed at pH 2. The adsorption increased with the increase in adsorbent dosage. As the adsorption capacity increased with the increase in temperature, the process was concluded to be endothermic. The experimental data were analyzed by the Langmuir and Freundlich isotherm models of adsorption. Equilibrium data fitted well with the Langmuir model. The rates of adsorption confirmed the pseudo-second order kinetics with good correlation values. The results indicated that the activated carbon prepared from pistachio nut shell can be effectively used for the removal of Acid Violet 17 from aqueous solution.     

Removal of copper from industrial wastewaters by activated carbon prepared from periwinkle shells

The present study aims at the removal of copper from industrial wastewater by using a low-cost adsorbent. Activated periwinkle shell carbon (PSC) was prepared and characterized for various physiochemical properties. To determine copper removal capacity, the performance of PSC was compared with commercial activated carbon (CAC) and a mixture of activated periwinkle shell carbon and commercial activated carbon (PSC:CAC) in a ratio 1:1. The effect of adsorbent dose, contact time, pH, agitation speed and adsorbent particle size was studied for adsorption of copper from wastewater under batch conditions. The result obtained showed that PSC competes favourably with CAC. The maximum adsorption capacity was observed for PSC:CAC with 88.12% removal at an optimal pH of 8. The PSC and CAC had 84.19% removal and 85.15% removal, respectively. The equilibrium data obtained fitted both the Langmuir and the Freundlich models. Good correlation coefficients were obtained for the pseudo-second-order kinetic model.     

Removal of cadmium(II) from aqueous solution by agricultural waste cashew nut shell

Cashew nut shell (CNS) is a low cost adsorbent that has been used for the removal of cadmium(II) from an aqueous solution. The effects of various parameters such as solution pH, CNS concentration, contact time, initial cadmium(II) concentration and temperature were examined. The CNS was effective for the quantitative removal of cadmium(II) ions in acidic conditions and equilibrium was achieved in 30 min. The experimental data were analyzed by two-parameter (Langmuir, Freundlich, Temkin and Dubinin-Radushkevich) and three-parameter models (Redlich- Peterson, Koble-Corrigan, Toth and Sips) by nonlinear regression analysis. The characteristic parameters for each isotherms and related correlation coefficients have been determined by using MATLAB 7.1. Thermodynamic parameters such as ??G ^o , ??H ^o and ??S ^o have also been evaluated, and it was found that the sorption process was feasible, spontaneous and exothermic. Pseudo-first-order, pseudo-second-order, Elovich kinetic and intraparticle diffusion models were selected to follow the adsorption process. The results of the kinetic study show that the adsorption of cadmium(II) could be described by the pseudo-second order equation, suggesting that the adsorption process is presumably chemisorption. A single-stage batch adsorber was designed for different adsorbent dose-to-effluent volume ratios using the Freundlich equation. The results indicate that the cashew nut shell could be used to effectively adsorb cadmium(II) from an aqueous solution.     

Removal of methylene blue from aqueous solutions by adsorption onto chemically activated halloysite nanotubes

This study examines the adsorption behavior of methylene blue (MB) from aqueous solutions onto chemically activated halloysite nanotubes. Adsorption of MB depends greatly on the adsorbent dose, pH, initial concentration, temperature and contact time. The Langmuir and Freundlich models were applied to describe the equilibrium isotherms and the Langmuir model agrees very well with experimental data. The maximum adsorption capacities for MB ranged from 91.32 to 103.63 mg·g⁻¹ between 298 and 318 K. A comparison of kinetic models applied to the adsorption data was evaluated for pseudo-first-order, pseudo-second-order, Elovich and intra-particle diffusion equation. The results showed the adsorption process was well described by the pseudo-second-order and intra-particle diffusion mode. Thermodynamic parameters suggest that the adsorption is spontaneous and endothermic. The obtained results indicated that the product had the potential to be utilized as low-cost and effective alternative for dye removal in wastewater.     

Lead(II) Adsorption onto Sulphuric Acid Treated Cashew Nut Shell

In this study, sulphuric acid treated cashew nut shell (STCNS) was used as adsorbent for the removal of lead(II) ions from the aqueous solutions. Adsorption studies were performed by varying the solution pH, contact time, and temperature. Experimental data were analyzed by the model equations such as Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherms and it was found that the Freundlich isotherm model fits best with the experimental data at different temperatures studied. The maximum adsorption capacity of lead(II) on STCNS was determined as 408.6, 432, 446.3, and 480.5 mg/g, respectively, at different temperatures (30, 40, 50, and 60°C). The thermodynamic parameters (ΔG^o, ΔH^o, and ΔS^o) were calculated and the thermodynamic properties of lead(II) ions-STCNS system indicate the exothermic process. Adsorption kinetic constants were determined using pseudo-first-order, pseudo-second-order, and the Elovich kinetic models at various temperatures. The adsorption results clearly showed that the adsorption of lead(II) ions onto STCNS followed pseudo-second-order model and the adsorption was both by film diffusion and by intraparticle diffusion. A single-stage batch adsorber was designed using the Freundlich equation.     

Coconut (Cocos nucifera) Shell Based Activated Carbon for the Removal of Malachite Green Dye from Aqueous Solutions

The adsorption of malachite green (MG) dye using coconut shell based activated carbon (CSAC) was investigated. Operational factors such as the effect of pH, initial dye concentration, adsorbent dosage, contact time, and solution temperature on the adsorption process were studied. Solution pH strongly affected the chemistry of both the dye molecule and CSAC in solution. Optimum dye removal was obtained at pH ≥ 8.0. Equilibrium was reached in 120 minutes contact time. The Langmuir, Freundlich, and Dubinin–Radushkevich (D-R) isotherm models were used to evaluate the adsorption data. The adsorption data fitted the Langmuir model most with maximum adsorption monolayer coverage of 214.63 mg/g. Pseudo-first-order, pseudo second-order, and intraparticle diffusion models were also used to fit the experimental data. Kinetic parameters, rate constants, equilibrium sorption capacities, and related correlation coefficients, for each model were calculated and discussed. Thermodynamic parameters such as ΔG⁰, ΔH⁰, and ΔS⁰ were evaluated and it was found that the sorption process was feasible, spontaneous, and exothermic in nature. The mean free energy obtained from D-R isotherm suggests that the adsorption process follows physiosorption mechanism. The results showed that coconut shells could be employed as a low-cost precursor in activated carbon preparation for the removal of MG dye from wastewaters.     

Removal of basic dyes from aqueous solution by low-cost adsorbent: Wood apple shell (Feronia acidissima)

The adsorption of two basic dyes, methylene blue (MB) and crystal violet (CV) on wood apple shell (WAS) were investigated using a batch adsorption technique. A series of experiments were undertaken in an agitated batch adsorber to assess the effect of the system variables such as solution pH, dye concentration and temperature. Removal of dyes was observed to be most effective at higher pH. Freundlich and Langmuir isotherm models were applied to the equilibrium data. The results showed that Langmuir equation fits better than the Freundlich equation. It was observed that the WAS adsorbent showed higher adsorption capacity for crystal violet (130 mg/g) than methylene blue (95.2 mg/g). The FTIR studies indicate that the interaction of dye and WAS surface is via the nitrogen atoms of the adsorbate and oxygen groups of the adsorbent. The adsorption of dyes onto WAS proceeds according to a pseudo-second-order model. Thermodynamic parameters such as free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) were also calculated. The studies show that WAS, a lignocellulosic inexpensive material, can be an alternative to other expensive adsorbents used for dye removal in wastewater treatment.     

EFFECT OF TEMPERATURE ON THE ADSORPTION OF METHYLENE BLUE DYE ONTO SULFURIC ACID–TREATED ORANGE PEEL

The present study explains the preparation and application of sulfuric acid–treated orange peel (STOP) as a new low-cost adsorbent in the removal of methylene blue (MB) dye from its aqueous solution. The effects of temperature on the operating parameters such as solution pH, adsorbent dose, initial MB dye concentration, and contact time were investigated for the removal of MB dye using STOP. The maximum adsorption of MB dye onto STOP took place in the following experimental conditions: pH of 8.0, adsorbent dose of 0.4 g, contact time of 45 min, and temperature of 30°C. The adsorption equilibrium data were tested by applying both the Langmuir and Freundlich isotherm models. It is observed that the Freundlich isotherm model fitted better than the Langmuir isotherm model, indicating multilayer adsorption, at all studied temperatures. The adsorption kinetic results showed that the pseudo-second-order model was more suitable to explain the adsorption of MB dye onto STOP. The adsorption mechanism results showed that the adsorption process was controlled by both the internal and external diffusion of MB dye molecules. The values of free energy change (ΔG ^o) and enthalpy change (ΔH ^o) indicated the spontaneous, feasible, and exothermic nature of the adsorption process. The maximum monolayer adsorption capacity of STOP was also compared with other low-cost adsorbents, and it was found that STOP was a better adsorbent for MB dye removal.     

Adsorption Characteristics of Congo Red from Aqueous Solution onto Tea Waste

The feasibility of using tea waste (TW) as a low-cost adsorbent for the adsorption of an anionic dye (Congo red) from aqueous solution has been investigated. Adsorption in a batch process was conducted to study the effect of adsorbent dosage, initial dye concentration, contact time, pH, and temperature. The experimental data were analyzed by the Langmuir, Freundlich, and Temkin models. The adsorption system was best described by the Langmuir isotherm (R ² > 0.99). Adsorption kinetics followed a pseudo-second-order model (R ² > 0.99). The effect of mechanical treatment (vibratory mill) was also studied. The experimental results showed that using this physical treatment leads to an increase in the adsorption capacity of TW from 32.26 to 43.48 mg/g. Thermodynamic analyses revealed that the adsorption of Congo red on TW was endothermic and spontaneous in nature. The results indicated that TW can be employed as a potential low-cost adsorbent for the removal of Congo red from aqueous solution.     

Adsorption performance of mesoporous silicas towards a cationic dye. Influence of mesostructure on adsorption capacity

The dye adsorption performance of four mesoporous silicas with different structure and textural properties, MCM-41, MCM-48, SBA-15 and mesocellular silica foam (MCF), was studied and compared by using toluidine blue O (TBO) as dye model in aqueous solution. These materials were characterized by X-ray diffraction (XRD), small-angle X-ray scattering, nitrogen adsorption-desorption analyses, and transmission electron microscopy (TEM). The effect of some parameters such as adsorbent dosage, contact time, temperature, and pH on the TBO removal in aqueous solution was studied. Results showed that adsorption capacity raised when adsorbent dosage, contact time and pH solution were increased while an increase in temperature decreased the adsorption of TBO. Langmuir, Freundlich and Temkin isotherm models were employed to elucidate the adsorption mechanism while the adsorption rate data were analyzed according to the pseudo-first and second-order kinetic models. Results showed that adsorption of TBO onto MCM-48, SBA-15, and MCF fitted well the Freundlich isotherm model while the kinetic studies showed that adsorption process could be better described by the pseudo-second-order model for all mesoporous silicas. Finally, some solvents were evaluated to carried out dye desorption from the TBO-loaded mesoporous silicas founding that acetic acid was the most efficient.     

Kinetics and equilibrium studies of removal of an azo dye from aqueous solution by adsorption onto scallop

In the present work removal of an azo dye (Reactive Black 5) was investigated from aqueous solution by adsorption onto scallop as a low-cost and widely available adsorbent. The effect of various operational parameters, such as contact time, pH, initial dye concentration and adsorbent dosage on the removal efficiency of dye was studied. Removal efficiency declined with the increase in solution pH and initial dye concentration but with the decrease in adsorbent dosage. Experimental equilibrium and kinetics data were fitted by Langmuir and Freundlich isotherms and pseudo-first-order and pseudo-second-order kinetic models, respectively.     

Removal of basic and acid dyes from aqueous solutions by a waste containing boron impurity

In this study, batch experiments were carried out for the sorption of basic blue 41 (BB 41), and acid blue 225 (AB 225) onto boron waste (BW) from boron enrichment plant. The operating variables studied are the initial dye concentration, contact time, solution pH, and adsorbent dosage. The experimental equilibrium data were analyzed by using various adsorption isotherm models and the results have shown that the adsorption behavior of AB 225 and BB 41 could be described well reasonably by Langmuir and Temkin isotherms, respectively. Kinetics studies indicated that the adsorption of both dyes follow pseudo-second-order kinetics. The sorption of basic dye increased at high pH values, whereas the opposite was true for acidic dye. The results indicate that BW could be employed as low-cost alternatives to the commercially available adsorbents in wastewater treatment for the removal of acid and basic dyes.     

膨润土-活性炭复合吸附剂对锰离子的吸附

以膨润土和活性炭为原料制备了复合吸附剂并将之应用于含锰离子废水的吸附。考察了不同条件下该吸附剂对水体中Mn（Ⅱ）的去除效果,并研究了吸附动力学特征和等温吸附过程。结果表明膨润土和活性炭复合吸附剂对Mn（Ⅱ）具有优良的吸附能力,在25 ℃下,当投加量为4 g/L、Mn（Ⅱ）初始质量浓度为50 mg/L、溶液pH为6时,吸附180 min,吸附率为93.2%。准一级、准二级动力学和内扩散模型用来拟合吸附过程,结果表明准二级动力学符合该吸附过程,吸附速率常数为0.003 6 g/（mg·min）,内扩散过程不是吸附的限速步骤,还存在吸附机制的制约。用Langmuir和Freundlich模型描述吸附等温过程,结果得出该吸附过程服从Langmuir吸附,饱和吸附容量为27.781 mg/g。     

Removal of Crystal Violet Dye from Aqueous Solution Using Calcined and Uncalcined Mixed Clay Adsorbents

In this work, calcined and uncalcined mixed clays containing kaolin, ball clay, feldspar, pyrophyllite, and quartz are examined as a potential adsorbent for the removal of crystal violet dye from aqueous solution. These clays are characterized by nitrogen adsorption/desorption isotherms, X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and thermo gravimetric analysis (TGA). The kinetics and thermodynamic parameters as well as the effects of the pH, the temperature, and the adsorbent dosage have also been investigated. The experimental results indicate that the Langmuir model expresses the adsorption isotherm better than the Freundlich model. The obtained result showed a tremendous increase in the crystal violet adsorption capacity (1.9 × 10^?3 mol g^?1) after calcination, which is one order greater than that of the uncalcined mixed clay. The mechanism of the adsorption process is elucidated on the basis of experimental data. The percentage removal of crystal violet dye increases with increasing the pH, the temperature, and the adsorbent dosage. The investigation of kinetic studies indicates that the adsorption of crystal violet on calcined and uncalcined mixed clays could be described by the pseudo-second-order model. The negative Δ G ⁰ values obtained from the thermodynamic investigation confirm that the adsorption is spontaneous in nature. The adsorption results suggest that the calcined and uncalcined mixed clays can also be used as low cost alternatives to the expensive activated carbon for the removal of dyes from aqueous solution.     

核桃壳水热炭对六价铬的吸附特性

以核桃壳为前体采用水热炭化法制备水热炭,利用低温液氮物理吸附仪和傅里叶变换红外光谱仪测定水热炭的孔结构和表面官能团;实验研究其对液相中Cr(Ⅵ)的吸附特性,考察吸附剂加入量、Cr(Ⅵ)初始浓度、pH值、吸附时间等因素对吸附效果的影响。结果表明,水热炭的孔径分布范围较宽,表面含氧官能团丰富,能够很好地吸附溶液中的六价铬;溶液pH值对Cr(Ⅵ)的脱除影响很大,pH值呈酸性时吸附效果较好,pH值为2时脱除率达98.85%.当反应温度35℃、Cr(Ⅵ)初始浓度50mg/L、水热炭投加量为16g/L、pH值为6、吸附时间为100min时,Cr(Ⅵ)离子的去除率可达98%以上。核桃壳水热炭对Cr(Ⅵ)具有良好的吸附能力,吸附过程符合准二级吸附动力学模型,可用Freundlich吸附等温模型来描述,吸附等温线的线性相关性显著。     

Adsorption of methylene blue from aqueous solution by kaolin and zeolite

In the present study, kaolin and zeolite have been utilized as adsorbents for the removal of a cationic dye, methylene blue (MB), from aqueous solution within a batch process. Characterization of the two adsorbents was carried out by nitrogen adsorption–desorption experiments (specific surface area measurements by the BET method). The effects of various parameters such as initial MB concentration, contact time, adsorbent concentration, stirring speed, solution pH and salt concentration were examined and optimal experimental conditions were determined. The kinetic data were analyzed using pseudo-first-order and pseudo-second-order models. The mass transfer model in terms of interlayer diffusion was applied to the experimental data to examine the mechanisms of the rate controlling step. In order to determine the best-fit-isotherm, the experimental data were analyzed by the Freundlich, Temkin, and Dubinin–Radushkevich equation which are found to best represent the equilibrium data for kaolin and zeolite. The values of activation parameters such as free energy (ΔG), enthalpy (ΔH) and entropy (ΔS) were also determined. The results indicate that kaolin and zeolite could be interesting alternative materials with respect to more costly adsorbents used for dye removal.     

Investigation of Reactive Red Dye 198 removal using multiwall carbon nanotubes in aqueous solution

The present study evaluates the performance of multiwalled carbon nanotubes (MWCNTs) for removing Reactive Red Dye 198 (RR198) from the color wastewater. In this study, the influence of pH, adsorbent dose, initial dye concentration, and contact time on the RR198 adsorption by MWCNTs was investigated. The results showed increasing the dye concentration from 20 to 200 mg/L, removal efficiency decreased from 99.62% to 66.99%. Moreover, by increasing the pH from 3 to 10, the efficiency of dye removal decreased from 76.34% to 54.98%. Freundlich isotherm and pseudo-second-order kinetic model were the best models for describing the adsorption reactions.     

From pollutant to solution of wastewater pollution: Synthesis of activated carbon from textile sludge for dye adsorption

Adsorption is an important process in wastewater treatment,and conversion of waste materials to adsorbent offers a solution to high material cost related to the use of commercial activated carbon.This study investigated the adsorption behaviour of Reactive Black 5(RB5)and methylene blue(MB)onto activated carbon produced from textile sludge(TSAC).The activated carbon was synthesized through chemical activation of precursor followed with carbonization at 650°C under nitrogen flow.Effects of time(0–200 min),pH(2–10),temperature(25–60°C),initial dye concentration(0–200 mg·L~(-1)),and adsorbent dosage(0.01–0.15 g)on dye removal efficiency were investigated.Preliminary screening revealed that TSAC synthesized via H_2SO_4activation showed higher adsorption behaviour than TSAC activated by KCl and ZnCl_2.The adsorption capacity of TSAC was found to be 11.98 mg·g~(-1)(RB5)and 13.27 mg·g~(-1)(MB),and is dependent on adsorption time and initial dye concentration.The adsorption data for both dyes were well fitted to Freundlich isotherm model which explains the heterogeneous nature of TSAC surface.The dye adsorption obeyed pseudo-second order kinetic model,thus chemisorption was the controlling step.This study reveals potential of textile sludge in removal of dyes from aqueous solution,and further studies are required to establish the applicability of the synthesized adsorbent for the treatment of waste water containing toxic dyes from textile industry.     

Adsorption of methylene blue from aqueous solutions by modified expanded graphite powder

The modified expanded graphite (MEG) powder was used as a porous adsorbent for the removal of the cationic dye, methylene blue (MB), from aqueous solutions. The dye adsorption experiments were carried out with the bath procedure. Experimental results showed that the basic pH, increasing initial dye concentration and high temperature favored the adsorption. The dye adsorption equilibrium was attained rapidly after 5 min of contact time. Experimental data related to the adsorption of MB on the MEG under different conditions were applied to the pseudo-first-order equation, the pseudo-second-order equation and the intraparticle diffusion equation, and the rate constants of first-order adsorption (k₁), the rate constants of second-order adsorption (k₂) and intraparticle diffusion rate constants (k_int) were calculated, respectively. The experimental data fitted very well in the pseudo-second-order kinetic model. The thermodynamic parameters of activation such as Gibbs free energy, enthalpy, and entropy were also evaluated. The results indicated that the MEG powder could be employed as an efficient adsorbent for the removal of textile dyes from effluents.     

Insight into adsorption kinetics and isotherms for adsorption of methylene blue using gum rosin alcohol/psyllium-based green adsorbent

Present work focused on synthesis of green hydrogel polymer of gum rosin alcohol/psyllium crosslinked poly (acrylic acid) [(GrA-Psy)-cl-PAA] under vacuum condition. Use of both psyllium and gum rosin alcohols as backbones could lessen the burden on the environment, as more natural aspect is drawn in the hydrogel polymer. The various reaction parameters for the synthesis of hydrogel polymer were systematically optimized as a function of percentage swelling. The optimized ecofriendly hydrogel polymer was characterized using XRD, FTIR, FE-SEM and TGA techniques, which supported the successful formation of crosslinked three-dimensional network structures. (GrA-Psy)-cl-PAA was further studied as an adsorbent for the removal of methylene blue dye from an aqueous solution. Adsorption parameters such as the amount of adsorbent and pH were optimized to obtain the maximum percentage of dye removal. Kinetics of the adsorption process was analyzed using pseudo-first-order, pseudo-second-order and Elovich kinetic models. Adsorption kinetics followed pseudo-second-order model (non-linear) for all the concentrations studied. Non-linear forms of Langmuir, Freundlich and Dubinin-Kaganer-Radushkevich isotherm models were studied for the adsorption process and it was observed that it goes well with both Langmuir and Freundlich isotherms. Thermodynamic parameters were also evaluated which indicated that the adsorption process was exothermic and spontaneous. Furthermore, the candidate polymer retained a reusability tendency for two consecutive cycles of adsorption/desorption. Thus, the synthesized novel material was taken as a potential to act as green adsorbent in treatment of industrial wastewater.