Green synthesis of α-Fe2O3 nanoparticles for photocatalytic application

In this study, the preparation of α-Fe₂O₃ nanoparticles using curcuma and tea leaves extract are reported. The curcuma and tea leaves are acted as a reductant and stabilizer. The crystal structure and particle size of the as-synthesized materials were measured through X-ray diffraction. X-ray diffraction patterns revealed that the as-prepared samples were α-Fe₂O₃ nanoparticles with well-crystallized rhombohedral structure and the crystallite sizes of the α-Fe₂O₃ nanoparticles are 4 and 5 nm. Scanning electron microscopy images showed that the prepared samples have spherical shape. The purity and properties of the as-synthesized α-Fe₂O₃ nanoparticles were measured by Raman spectroscopy. The chemical compositions of the as-prepared α-Fe₂O₃ nanoparticles have been analyzed by Fourier transform infrared spectroscopy. The absorption edge of the α-Fe₂O₃ nanoparticles are 561 and 551 nm. The photocatalytic activity of the α-Fe₂O₃ nanoparticles was measured by degradation of methylene orange and the α-Fe₂O₃ nanoparticles showed the excellent photocatalytic performance.     

Chemical synthesis of faceted α-Fe2O3 single-crystalline nanoparticles and their photocatalytic activity

Faceted hematite nanocrystals have been synthesized via a hydrothermal route and their different morphologies can be tuned by appropriate stabilizer molecules. Detailed observation by high-resolution transmission electron microscopy and atomic force microscopy has revealed many terraces, steps, and kinks on the faceted surface of hematite nanoparticles, and thus, one growth mechanism of the terrace-step-kink model has been suggested to play a major role in determining the equilibrium morphology, together with effect of surface chemistry via the interaction between outer surfaces of iron and oxygen ions and functional groups. The photocatalytic activities were evaluated by decomposing rhodamine B dye. It has been shown that polyhedron hematite particles enclosed by high-index surface planes exhibited higher photoactivity. Density functional theory calculations revealed that the higher photoactivity originates from the more flat band edge in directions normal to the surface planes.     

Sonochemical fabrication and catalytic properties of α-Fe2O3 nanoparticles

In this study, α-Fe₂O₃ (hematite) nanoparticles were synthesised by a sonochemical method. The influence of different factors such as chemical composition of the precursors, atmosphere of the reactions and type of the sonicator on the chemical formula, crystallinity, morphology and size of the obtained products were investigated. Powder X-ray diffraction, scanning electron microscopy and IR spectroscopy, were used to characterise the nanostructures. The catalytic tests were performed in the reaction of methyl phenyl sulphide oxidation. The results exhibit the good catalytic performance of the as-prepared α-Fe₂O₃ nanoparticles.     

Hydrothermal synthesis,characterization and thermal stability studies of α-Fe2O3 hollow microspheres

A simple, cost-effective hydrothermal technique was used in this study to successfully fabricate hollow α-Fe₂O₃ microspheres, using only fructose and anhydrous ferric chloride without any organic solvent or additive. The synthesized α-Fe₂O₃ hollow microspheres were characterized by X-ray diffraction spectroscopy (XRD), field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR). Based on the results, the shell was composed of aggregated α-Fe₂O₃ nanoparticles, while the fructose-derived carbon core was decomposed during calcination, leaving a hollow interior. XRD analysis confirmed the presence of the α-phase and the absence of γ-phase Fe₂O_3. A mean diameter of 595 nm was estimated for the microspheres by the Gaussian fit of the histogram constructed from the diameters measured over the SEM images. EDX spectrum of the sample showed signals attributed to Fe and O, and a homogenous distribution of these elements was confirmed by elemental mapping studies. ATR-FTIR analysis confirmed the bending and stretching vibration modes of the Fe-O bond. TGA-DTA data depicted that thermal stability of α-Fe₂O₃ hollow microsphere was achieved at 480 °C and no weight loss was observed up to 1000 °C. High-temperature calcination results showed that the material can maintain its hollow morphology up to 700 °C. This material has potential applications in drug delivery, gas sensing, and lithium storage.     

Preparation and characterization of α-Fe2O3–CeO2 composite

In our previous study we attempted to see the effect of cerium doping (Ce/Fe ratio 0.015 to 0.074) on goethite matrix and conversion of doped goethite to hematite. In the present communication, nano-structured α-Fe₂O₃–CeO₂ composite with Fe/Ce weight ratio as 1.1 has been synthesized by calcination of goethite-cerium hydroxide precursor prepared by co-precipitation method. It was observed that co-precipitation of cerium along with iron in hydroxide medium resulted in hindering the formation of crystalline order as the precursor formed showed poorly crystallized goethite and almost no crystallinity in Ce(OH)₄. Calcination of the precursor at 400 °C showed the formation of hematite together with a broad peak corresponding to cerium oxide whereas at 800 °C, two distinct phases of α-Fe₂O₃ and CeO₂ were observed. The Mössbauer spectra showed the presence of a paramagnetic component both for the precursor as well as for the sample calcined at 400 °C but on raising the calcination temperature to 800 °C, the paramagnetic component disappeared and the spectrum corresponding to pure α-Fe₂O₃ phase was observed. The microstructure of the product obtained by calcining at 800 °C showed rod like structure (30 to 50 nm width and 300 to 500 nm length) of α-Fe₂O₃ having equi-dimensional CeO₂ particles on and around the surface. Besides the rods, equi-dimensional particles and agglomerates corresponding to CeO₂ were also observed. The results show that co-precipitation followed by calcinations gives nanorods hematite with CeO₂ particles bonded to its surface.     

Top-down synthesis of mesocrystalline α-Fe2O3 submillimeter-sized rhombohedrons

ABSTRACT

Here, we focus on the obtaining of mesocrystalline submillimeter-sized (150/50 µm) rhombohedral hematite (α-Fe₂O₃) by thermal treatment in air of single crystalline submillimeter-sized (150/50 µm) rhombohedrons of ferrous carbonate (FeCO₃). Mass spectrometer-coupled thermogravimetric analysis and TGA-MS revealed the chemical reactions occurring during the thermal treatment of ferrous carbonate sample. The X-ray Diffraction (XRD) data sustain that the final product is hematite. The XRD line-profile analysis indicates that the resulted hematite is built of individual ordered crystallites with 66 ± 5 nm average sizes, confirmed by scanning electron microscopy and transmission electron microscopy images. Small-angle x-ray scattering investigation of hematite sample was presented. The log-log plot of scattering intensity decay showed the same slope, α = ?3.76, corresponding to both high and low scattering vector regions; the fractal surface is D_s = 2.24. This fractality is extended over a range of sizes and can touch high molecular dimensionality. The internal morphology and the synthesis mechanism of the obtained hierarchical superstructure were described.     

Simple and rapid synthesis of α-Fe2O3 nanowires under ambient conditions

We propose a simple method for the efficient and rapid synthesis of one-dimensional hematite (α-Fe₂O₃) nanostructures based on electrical resistive heating of iron wire under ambient conditions. Typically, 1–5 μm long α-Fe₂O₃ nanowires were synthesized on a time scale of seconds at temperatures of around 700 ° ⊂. The morphology, structure, and mechanism of formation of the nanowires were studied by scanning and transmission electron microscopies, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and Raman techniques. A nanowire growth mechanism based on diffusion of iron ions to the surface through grain boundaries and to the growing wire tip through stacking fault defects and due to surface diffusion is proposed. Electronic Supplementary Material  Supplementary material is available for this article at and is accessible for authorized users.     

Thermal decomposition synthesis of 3D urchin-like α-Fe2O3 superstructures

Urchin-like α-Fe₂O₃ superstructures have been deposited on Si substrate using thermal decomposition FeCl₃ solution at 200–600 °C in the oven. The morphologies and structures of the synthesized urchin-like superstructures have been characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The results show that urchin-like α-Fe₂O₃ superstructures were a polycrystal with the rhombohedral structure and typical diameters of 16–20 nm and lengths up to 1.0 μm. The as-prepared α-Fe₂O₃ superstructures have a high Brunauer–Emmett–Teller (BET) surface area of about 60.24 m²/g. The photoluminescence spectrum of the urchin-like α-Fe₂O₃ superstructures consists of one weak emission peak at 548 nm (2.26 eV). A possible new mechanism for the formation of the urchin-like superstructures was also preliminarily discussed.     

Mechanochemical synthesis and characterization of xIn2O3��(1???x)��-Fe2O3 nanostructure system

Indium oxide-doped hematite xIn₂O₃·(1 ? x)??-Fe₂O₃ (x = 0.1?C0.7) nanostructure system was synthesized using mechanochemical activation by ball milling and characterized by XRD, simultaneous DSC?CTGA, and UV/Vis/NIR. The microstructure and thermal behavior of as obtained system were dependent on the starting In₂O₃ molar concentration x and ball milling time. XRD patterns yielded the dependence of lattice parameters and grain size as a function of ball milling time. After 12 h of ball milling, the completion of In³⁺ substitution of Fe³⁺ in hematite lattice occurs for x = 0.1, indicating that the solid solubility of In₂O₃ in hematite lattice is extended. For x = 0.3, 0.5, and 0.7, the substitutions between In³⁺ and Fe³⁺ into hematite and In₂O₃ lattice occur simultaneously. The lattice parameters a and c of hematite and lattice parameter a of indium oxide vary as a function of ball milling time. The changes of these parameters are due to ion substitutions between In³⁺ and Fe³⁺ and the decrease in the grain sizes. Ball milling has a strong effect on the thermal behavior and band gap energy of the as-obtained system. The hematite decomposition is enhanced due to the smaller hematite grain size. The crystallization of hematite and In₂O₃ was suppressed, with drops of enthalpy values due to the stronger solid?Csolid interactions after ball milling, which caused gradual In³⁺?CFe³⁺ substitution in hematite/In₂O₃ lattices. The band gap for hematite shifts to higher energy value, while that of indium oxide shifts to lower energy value after ball milling.     

Novel process for synthesis of α-Fe2O3: microstructural and optoelectronic investigations

Novel chemical synthesis method has been successfully employed for the preparation of n type α-Fe₂O₃ nanoparticles. Thin films of annealed Fe₂O₃ powders processed on glass substrates using spin coating technique. The effects of process temperature on the structural, morphological, electrical transport and optical properties were studied. X-ray diffraction study revealed formation of single phase nanocrystalline hexagonal α-Fe₂O₃. Microstructural analysis confirms nanostructured morphology. Dc electrical conductivity measurement reveled the semiconducting nature with room temperature electrical conductivity increased from 10^?4 to 10^?3 (Ω cm)^?1 as process temperature of Fe₂O₃ increased from 400 to 700 °C respectively. The n-type electrical conductivity is confirmed from thermo-emf measurement with no appreciable change in thermoelectric power after increasing processing temperature. The decrease in the band gap energy from 3.88 to 2.62 eV was observed after increasing process temperature.     

Controlled synthesis of mesoporous α-Fe2O3 nanorods and visible light photocatalytic property

Porous α-Fe₂O₃ nanorods with typical pore size of 2–4 nm were controlled prepared by a facile hydrothermal process of Fe(NO₃)₃·9H₂O aqueous solution in the presence of NaOH, followed by a calcination treatment. Contrast experiments indicate that the morphology and crystalline structure of the hydrothermal products depend greatly on the quantity of NaOH. Hematite nanoparticles and microplates were respectively obtained under conditions without or with excess NaOH. The porous α-Fe₂O₃ nanorods exhibit a high BET surface area of 105.1 m² g^?1 and a pore volume of 0.13 m³ g^?1. UV–vis measurement shows wide absorption to visible light and an obvious blue-shift of the adsorption edge due to the quantum size effect. The visible-light photocatalytic performances of the as-prepared samples were evaluated by photocatalytic decolorization of methylene blue at ambient temperature. The results indicate that the photocatalytic activity of the porous α-Fe₂O₃ nanorods is superior to hematite nanoparticles and platelets and exhibit good reusable feature. The photocatalytic process of porous structure is determined to be pseudo-first-order reaction with apparent reaction rate constant of 1.04 × 10^?2 min^?1. And the optimum photocatalyst dosage is 20 mg per 100 mL of dye solution. The porous α-Fe₂O₃ nanorods are considered potential photocatalyst for practical application due to the excellent photocatalytic behavior and good reusability.     

One-pot synthesis of magnetic γ-Fe2O3 nanoparticles in ethanol-water mixed solvent

Maghemite (γ-Fe₂O₃) nanoparticles were synthesized via a low-temperature solution-based method using ferric chloride hexahydrate and ferrous chloride tetrahydrate as precursors in the mixed solvent of ethanol and water. X-ray diffraction, energydispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy revealed that the obtained product was pure γ-Fe₂O₃. Transmission electron microscopy showed the morphology of the nanoparticles to be approximately spherical in shape with an average diameter of 11 nm. Magnetization measurements indicated the dry powders exhibit ferromagnetic behavior with a maximum saturation magnetization of 41.1 emu/g at room temperature.     

Green synthesis of mesoporous hematite (α-Fe2O3) nanoparticles and their photocatalytic activity

A green synthesis method for the preparation of mesoporous α-Fe₂O₃ nanoparticles has been developed using the extract of green tea (camellia sinensis) leaves. This simple and one-step method can suitably be scaled up for large-scale synthesis. The as-prepared mesoporous nanoparticles were characterized by SEM, TEM, XRD, XPS, Raman, UV–visible spectroscopy and N₂ adsorption analysis. The nanoparticles were highly pure and well crystallized with an average particle size of 60 nm. The photocatalytic activity of nanoparticles was evaluated by the amount of hydroxyl radical formation under visible light irradiation detected by fluorescence spectroscopy. The as-prepared α-Fe₂O₃ showed two times higher activity than commercial α-Fe₂O₃ in term of hydroxyl radical formation and enhanced performance in a photoelectrochemical cell. Also, a plausible mechanism for the formation of mesoporous α-Fe₂O₃ has been suggested.     

Effect of mechanical activation on the synthesis of α-Fe2O3-Cr2O3 solid solutions

Continuous -Fe₂O₃-Cr₂O₃ solid solution series have been synthesized by two methods: (i) direct heating of coprecipitated hydroxides, and (ii) mechanical pre-treatment followed by heating. It is shown that mechanical treatment leads to a decrease in the preparation temperature of the solid solutions to 623 K. The formation of a continuous solid solution series by direct heating begins only at 773 K. The formation of the solid solutions was established by X-ray diffraction analysis, infrared and Mössbauer spectroscopy. The decrease in synthesis temperature of the -Fe₂O₃-Cr₂O₃ solid solutions is attributed to activation of the samples during their mechanical treatment. The samples obtained have large specific surface areas (up to 130 m² g^–1).     

Structure switch between α-Fe2O3, γ-Fe2O3 and Fe3O4 during the large scale and low temperature sol–gel synthesis of nearly monodispersed iron oxide nanoparticles

With same procedure and same starting materials, nearly monodispersed α-Fe₂O₃, γ-Fe₂O₃ and Fe₃O₄ nanoparticles were synthesized on an large scale of about 60 g in a single reaction through a low temperature sol–gel route. The simple preparation process includes the reactions between FeCl₂ and propylene oxide in ethanol solution at boiling point to form a sol and the following drying of the sol. The different iron oxide phases can be obtained just by changing of the drying conditions for the sol solution. The strategy developed in this study offers important advantages over the conventional routes for the synthesis of α-Fe₂O₃, γ-Fe₂O₃ and Fe₃O₄ nanoparticles, showing potential for its application in industrial production of iron oxides.     

Facile synthesis of α-Fe2O3 nanodisk with superior photocatalytic performance and mechanism insight

Abstract

Intrinsic short hole diffusion length is a well-known problem for α-Fe₂O₃ as a visible-light photocatalytic material. In this paper, a nanodisk morphology was designed to remarkably enhance separation of electron-hole pairs of α-Fe₂O₃. As expected, α-Fe₂O₃ nanodisks presented superior photocatalytic activity toward methylene blue degradation: more than 90% of the dye could be photodegraded within 30 min in comparison with a degradation efficiency of 50% for conventional Fe₂O₃ powder. The unique multilayer structure is thought to play a key role in the remarkably improved photocatalytic performance. Further experiments involving mechanism investigations revealed that instead of high surface area, ·OH plays a crucial role in methylene blue degradation and that O^·2? may also contribute effectively to the degradation process. This paper demonstrates a facile and energy-saving route to fabricating homogenous α-Fe₂O₃ nanodisks with superior photocatalytic activity that is suitable for the treatment of contaminated water and that meets the requirement of mass production.     

Facile synthesis of α-Fe2O3 nanodisk with superior photocatalytic performance and mechanism insight

Intrinsic short hole diffusion length is a well-known problem for α-Fe₂O₃ as a visible-light photocatalytic material. In this paper, a nanodisk morphology was designed to remarkably enhance separation of electron-hole pairs of α-Fe₂O₃. As expected, α-Fe₂O₃ nanodisks presented superior photocatalytic activity toward methylene blue degradation: more than 90% of the dye could be photodegraded within 30 min in comparison with a degradation efficiency of 50% for conventional Fe₂O₃ powder. The unique multilayer structure is thought to play a key role in the remarkably improved photocatalytic performance. Further experiments involving mechanism investigations revealed that instead of high surface area, ·OH plays a crucial role in methylene blue degradation and that O^·2− may also contribute effectively to the degradation process. This paper demonstrates a facile and energy-saving route to fabricating homogenous α-Fe₂O₃ nanodisks with superior photocatalytic activity that is suitable for the treatment of contaminated water and that meets the requirement of mass production.     

Influence of different materials on the microstructure and optical band gap of α-Fe2O3 nanoparticles

Composites of hematite (α-Fe₂O₃) nanoparticles with different materials (NiO, TiO₂, MnO₂ and Bi₂O₃) were synthesized. Effects of different materials on the microstructure and optical band gap of α-Fe₂O₃ nanoparticles were studied. Crystallite size and strain analysis indicated that the pure α-Fe₂O₃ nanoparticles were influenced by the presence of different materials in the composite sample. Crystallite size and strain estimated for all the samples followed opposite trends. However, the value of direct band gap decreased from ～2.67 eV for the pure α-Fe₂O₃ nanoparticles to ～2.5 eV for α-Fe₂O₃ composites with different materials. The value of indirect band gap, on the other hand, increased for all composite samples except for α-Fe₂O₃/Bi₂O₃.     

Three-dimensional hierarchical flowerlike α-Fe2O3 nanostructures: synthesis and ethanol-sensing properties

The α-Fe(2)O(3) hierarchical nanostructures have been successfully synthesized via a simple solvothermal method. The as-prepared samples are loose and porous with flowerlike structure, and the subunits are irregularly shaped nanosheets. The morphology of the α-Fe(2)O(3) structures was observed to be tunable as a function of reaction time. To demonstrate the potential applications, we have fabricated a gas sensor from the as-synthesized hierarchical α-Fe(2)O(3) and investigated it for ethanol detection. Results show that the hierarchical α-Fe(2)O(3) sensor exhibits significantly improved sensor performances in comparison with the compact α-Fe(2)O(3) structures. The enhancement of sensing properties is attributed to the unique porous and well-aligned nanostructure.