Synthesis and anticorrosion properties of poly(2,3‐dimethylaniline) doped with phosphoric acid

Poly(2,3‐dimethylaniline) (P(2,3‐DMA)) was synthesized chemically by using phosphoric acid (H₃PO₄) as protonic acid. The optimum ratio for n(H₃PO₄)/n(2,3‐DMA)/n(APS) was 2.5/1/2, and the optimum temperature was 30°C. The spectra of ultraviolet‐visible and infrared demonstrate that the structure of P(2,3‐DMA) was similar with polyaniline (PANI) except for the 2,3‐ortho‐substitute methyl. The result of X‐ray diffraction and solubility analysis indicate that owing to the 2,3‐ortho‐substitute benzene ring, the P(2,3‐DMA) has poorly partial crystallinity and better solubility. In addition, the anticorrosion property of P(2,3‐DMA) was better than PANI. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and properties of new poly(amide‐imide)s based on 2,5‐bis(trimellitimido)chlorobenzene

A series of new aromatic poly(amide‐imide)s were synthesized by the triphenyl phosphite‐activated polycondensation of the diimide‐diacid, 2,5‐bis(trimellitimido)chlorobenzene (I) with various aromatic diamines in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP), pyridine, and calcium chloride. The poly(amide‐imide)s had inherent viscosities of 0.76–1.42 dL g⁻¹. The diimide‐diacid monomer (I) was prepared from 2‐chloro‐p‐phenylenediamine with trimellitic anhydride. Most of the resulting polymers showed an amorphous nature and were readily soluble in a variety of organic solvents, including NMP and N,N‐dimethylacetamide. Transparent, flexible, and tough films of these polymers could be cast from N,N‐dimethylacetamide or NMP solutions. Their cast films had tensile strengths ranging from 74 to 95 MPa, elongations at break from 7 to 11%, and initial moduli from 1.38 to 3.25 GPa. The glass transition temperatures of these polymers were in the range of 233°–260°C, and the 10% weight loss temperatures were above 450°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1691–1701, 1999     

Synthesis of novel poly(vinyl ether)s containing the oxybenzylidenemalononitrile group as a nonlinear optical chromophore,and their electro‐optic properties

2,4‐Di‐(2′,2′‐dicyanovinyl)‐1‐(2′‐vinyloxyethoxy)benzene and 2,4‐di‐(2′‐carbomethoxy‐2′‐cyanovinyl)‐1‐(2′‐vinyloxyethoxy)benzene were prepared by condensation of 4‐(2′‐vinyloxyethoxy)isophthaldehyde with malononitrile and methyl cyanoacetate, respectively. The two vinyl monomers were polymerized with boron trifluoride etherate as a cationic initiator to yield poly(vinyl ether)s containing two oxybenzylidenemalononitrile and oxybenzylidenecyanoacetate groups, which are effective chromophores for second‐order nonlinear optical applications. These polymers were soluble in common organic solvents such as acetone and dimethyl sulforide. They showed thermal stabilities up to 300 °C from thermogravimetric analysis (TGA), with differential scanning calorimeter (DSC) thermograms giving T_g values in the range 73–87 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films were around 1.8 × 10^?9 esu, and these polymers showed good long‐term thermal stability for 60 days at room temperature, which is acceptable for nonlinear optical (NLO) device applications. Copyright © 2004 Society of Chemical Industry     

An investigation into the morphology and electro‐optical properties of 2‐hydroxy ethyl methacrylate polymer dispersed liquid crystals

Polymer dispersed liquid crystal (PDLC) films are fabricated using E7 liquid crystals, tetraethylene glycol diacrylate (TeGDA) crosslinking agent, and 0–66.49 mol % 2‐hydroxy ethyl methacrylate (HEMA). The effects of different levels of HEMA addition on the microstructure and electro‐optical properties of the PDLC samples are examined using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and UV‐Vis spectroscopy, respectively. The results show that the refractive index of the PDLC films is insensitive to the level of HEMA addition. However, an increasing HEMA content improves the degree of phase separation during the polymerization process and increases the size and uniformity of the liquid crystal domain. As a result, the electro‐optical properties of the PDLC films are significantly improved as the level of HEMA addition is increased. Overall, the results show that a PDLC comprising 40 wt % E7 liquid crystals, 33.51 mol % TeGDA and 66.49 mol % HEMA has a high contrast ratio (13 : 1) and a low driving voltage (10 V) and is therefore an ideal candidate for a wide variety of intelligent photoelectric applications. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and properties of hydrophilic segmented block copolymers based on poly(ethylene oxide)‐ran‐poly(propylene oxide)

The present article discusses the synthesis and various properties of segmented block copolymers with random copolymer segments of poly(ethylene oxide) and poly(propylene oxide) (PEO‐r‐PPO) together with monodisperse amide segments. The PEO‐r‐PPO contained 25 wt % PPO units and the segment presented a molecular weight of 2500 g/mol. The synthesized copolymers were analyzed by differential scanning calorimetry, Fourier transform infra‐red spectroscopy, atomic force microscopy and dynamic mechanical thermal analysis. In addition, the hydrophilicity and the contact angles (CAs) were studied. The PEO‐r‐PPO segments displayed a single low glass transition temperature, as well as a low PEO crystallinity and melting temperature, which gave enhanced low‐temperature properties of the copolymer. The water absorption values remained high. In comparison to mixtures of PEO/PPO segments, the random dispersion of PPO units in the PEO segments was more effective in reducing the PEO crystallinity and melting temperature, without affecting the hydrophilicity. Increasing the polyether segment length with terephthalic groups from 2500 to 10,000 g/mol increased the hydrophilicity and the room temperature elasticity. Furthermore, the CAs were found to be low 22–39° and changed with the crosslink density. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci 117:1394–1404, 2010     

Synthesis and characterization of new poly(amide‐imide)s based on 1,4‐bis(trimellitimido)‐2,5‐dichlorobenzene

A series of new aromatic poly(amide‐imide)s were synthesized by the triphenyl phosphite‐activated polycondensation of the diimide‐diacid, 1,4‐bis(trimellitimido)‐2,5‐dichlorobenzene (I), with various aromatic diamines in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP), pyridine, and calcium chloride. The poly(amide‐imide)s had inherent viscosities of 0.88–1.27 dL g⁻¹. The diimide‐diacid monomer (I) was prepared from 2,5‐dichloro‐p‐phenylenediamine with trimellitic anhydride. All the resulting polymers were amorphous and were readily soluble in a variety of organic solvents, including NMP and N,N‐dimethylacetamide. Transparent, flexible, and tough films of these polymers could be cast from N,N‐dimethylacetamide or NMP solutions. Cast films had tensile strengths ranging from 92 to 127 MPa, elongations at break from 4 to 24%, and initial moduli from 2.59 to 3.65 GPa. The glass transition temperatures of these polymers were in the range of 256°–317°C, and the 10% weight loss temperatures were above 430°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 271–278, 1999     

Poly(2‐) and (3‐aminobenzoic acids) and their copolymers with aniline: Synthesis,characterization, and properties

Poly(2‐aminobenzoic acid) and poly(3‐aminobenzoic acid) were synthesized by chemical polymerization of the respective monomers with aqueous 1M hydrochloric acid and 0.49M sodium hydroxide, using ammonium persulfate as an oxidizing agent. In addition, polymerization in an acid medium was carried out in the presence of metal ions, such as Cu(II), Ni(II), and Co(II). Poly(2‐aminobenzoic acid‐co‐aniline) and poly(3‐aminobenzoic acid‐co‐aniline) were synthesized by chemical copolymerization of aniline with 2‐ and 3‐aminobenzoic acids, respectively, in aqueous 1M hydrochloric acid. The copolymers were synthesized at several mole fractions of aniline in the feed and characterized by UV–visible and FTIR spectroscopy, the thermal stability, and the electrical conductivity. Metal ions, such as Cu(II), Ni(II), and Co(II), were incorporated into homo‐ and copolymers by the batch method. The percentage of metal ions in the polymers was higher in the copolymers than in the homopolymers. The thermal stability of the copolymers increased as the feed mole fraction of aniline decreased and varied with the incorporation of metal ions in the polymers. The electrical conductivity of the homo‐ and copolymers was measured, which ranged between 10^?3 and 10^?10 S cm^?1. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2641–2648, 2003     

Synthesis and properties of poly(aryl ether ketone)‐based phthalonitrile resins

A series of poly(aryl ether ketone) oligomers containing phthalonitrile were synthesized by a direct solution polycondensation, and characterized by fourier transform infrared spectroscopy and hydrogen nuclear magnetic resonance. Differential scanning calorimetry results showed the oligomers had low melting points and large processing windows (103–124°C) in the presence of bis[4‐(4‐aminophenoxy)phenyl]sulfone. The uncured synthesized oligomers had good solubility while the cured samples became insoluble in common organic solvents. Isothermal rheometric analysis showed the rate of phthalonitrile polymerization could be controlled easily by varying concentration of curing additive and curing temperature, which indicated that the oligomers possessed good processability. Gel content measurements demonstrated that the cured oligomers had high crosslinking density with the significantly high gel content over 90.1%. Dynamic mechanical analysis indicated the oligomeric phthalonitrile resins according to our curing procedure possessed good thermal mechanical properties. Thermogravimetric analysis of cured resins showed the highest temperature for 5% weight loss reached 515 and 516°C under nitrogen and air, respectively, and the char yield was over 67% at 800°C, revealing that the phthalonitrile resins possessed excellent thermal and thermo‐oxidative stability. This kind of the oligomeric phthalonitrile resins may be used as a good candidate for high‐performance polymeric materials. POLYM. ENG. SCI., 54:1695–1703, 2014. © 2013 Society of Plastics Engineers     

Effect of microstructure on the dielectric properties of poly(vinyl alcohol)–poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonate) composite films

Poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonate) (PEDOT–PSS) was blended with poly(vinyl alcohol) (PVA) to form 0, 10, 20, 30, 40, and 50 vol % PEDOT–PSS/PVA solutions, and their freestanding films were prepared with a simple and cost‐effective solution casting technique at 27 °C in the absence of additives. Field emission scanning electron microscopy images revealed changes in the cocontinuous network to a rodlike morphology in the composite films from 10 to 50 vol % PEDOT–PSS/PVA. The alternating‐current conductivity was found to obey Jonscher's power law. The obtained values of the dielectric constant at 27 °C were relatively high, and a maximum value of 6.7 × 10⁴ at 100 Hz for 40 vol % PEDOT–PSS'/PVA was observed. The dielectric loss attained a maximum value of about 10⁶ at 100 Hz for 40 vol % PEDOT–PSS/PVA. However, a decrease in the dielectric parameters was observed at 50 vol % PEDOT–PSS/PVA because of locally induced strain in the microstructure. The variations in polarization with respect to the applied electric field (P–E) were determined for 50, 100, and 500 Hz at 500 V for the freestanding composite films of lower concentrations up to 20 vol % PEDOT–PSS/PVA. In summary, the dielectric and P–E measurements confirmed that the electrical characteristics changed in accordance to the contribution from both resistive and capacitive sites in the PEDOT–PSS/PVA composites. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45079.     

Synthesis and electro‐optical properties of novel Y‐type polyurethanes containing dioxynitrostilbene

3,4‐Di‐(2′‐hydroxyethoxy)‐4′‐nitrostilbene (2) was prepared by the reaction of 2‐iodoethanol with 3,4‐dihydroxy‐4′‐nitrostilbene. Diol 2 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate and 1,6‐hexamethylenediisocyanate to yield novel Y‐type polyurethanes 3–5 containing dioxynitrostilbene as a non‐linear optical (NLO)‐chromophore. Polymers 3–5 were soluble in common organic solvents, such as acetone and DMF. These polymers showed thermal stability up to 280 °C in TGA thermograms with T_g values in the range of 100–143 °C in DSC thermograms. The approximate lengths of aligned NLO‐chromophores of the polymers estimated from AFM images were around 2 nm. The SHG coefficients (d₃₃) of poled polymer films were around 4.5 × 10^?8 esu. Poled polymer films had improved temporal and long‐term thermal stability owing to the hydrogen bonding of urethane linkage and the main‐chain character of the polymer structure, which are acceptable for NLO device applications. Copyright © 2004 Society of Chemical Industry     

Synthesis and properties of novel biodegradable poly(ε‐caprolactone)/ poly(ethylene glycol)‐based polyurethane elastomers

Elastomeric polyurethanes with tunable biodegradation properties and suitable for numerous biomedical applications were synthesized via reaction of epoxy‐terminated polyurethanes (EUPs) with 1,6‐hexamethylenediamine as curing agent. The EUPs themselves were prepared from glycidol and isocyanate‐terminated polyurethanes made from poly(ε‐caprolactone) (PCL) or poly(ethylene glycol) (PEG) and 1,6‐hexamethylene diisocyanate. All the polymers were characterized by conventional methods, and their physical, mechanical, thermal, and degradation properties were studied. The results showed that the degradation rate and mechanical properties of the final products can be controlled by the amount of PEG or PCL present in the EUP. Increasing the PEG content causes an increase of hydrolytic degradation rate, and increasing the PCL content improves the mechanical properties of the final products. Evaluation of cytotoxcicity showed nontoxic behavior of the prepared samples, but the cytocompatibility of these polymers needs to be improved. Copyright © 2006 Society of Chemical Industry     

Synthesis and investigation of the properties of poly(phenyl‐α‐naphthylsilylene)–dimethylsilylene copolymers

A Wurtz‐type reductive coupling reaction of dichlorophenyl‐α‐naphthylsilane was carried out in a mixture of toluene and o‐xylene in the presence of sodium and a catalytic amount of mercury; α,ω‐dichlorophenyl‐α‐naphthylsilylenes of various degrees of polymerization were obtained. Through the hydrolysis of α,ω‐dichlorophenyl‐α‐naphthylsilylenes, corresponding dihydroxy compounds were obtained. The heterofunctional polycondensation of α,ω‐dihydroxyphenyl‐α‐naphthylsilylenes with α,ω‐dichlorodimethylsilylenes was performed both without amines and in the presence of amines. Heterofunctional polycondensation without amines did not proceed with the formation of high molecular weight compounds because the cleavage of both ? Si? Si? and ?Si? O? Si? bonds took place during condensation. In the presence of amines, polysilylene–silylene copolymers were obtained. The synthesized copolymers were investigated with gel permeation chromatography, differential scanning calorimetry, roentgenography, and thermogravimetry. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1047–1056, 2002     

Synthesis of poly(sodium acrylate‐co‐sodium 1‐(acryloyloxy) propan‐2‐yl phosphate) and comparative study on its swelling properties with poly(sodium acrylate) and poly(sodium acrylate‐co‐2‐hydroxypropyl acrylate)

A new superabsorbent copolymer, poly(sodium acrylate‐co‐sodium 1‐(acryloyloxy) propan‐2‐yl phosphate) [P(SA‐co‐SAPP)], was synthesized by a novel prepared monomer, 1‐(acryloyloxy) propan‐2‐yl phosphoryl dichloride. The swelling properties of the superabsorbent were investigated by comparison with poly(sodium acrylate) (PSA) and the copolymer of poly(sodium acrylate‐co‐2‐hydroxypropyl acrylate) [P(SA‐co‐HPA)]. The results showed that (1) the superabsorbent containing sodium 1‐(acryloyloxy) propan‐2‐yl phosphate had higher water absorbency at general testing conditions; (2) the swelling properties of P(SA‐co‐SAPP) and PSA were obviously influenced by pH of solutions, which were different from that of P(SA‐co‐HPA); (3) the swelling process and the saturated water absorbency of all superabsorbents were remarkably affected by cations, especially multivalent ones, while barely affected by anions. POLYM. ENG. SCI., 47:728–737, 2007. © 2007 Society of Plastics Engineers.     

Synthesis and characterization of poly(o‐toluidine) doped with organic sulfonic acid by solid‐state polymerization

Poly (o‐toluidine) (POT) salts doped with organic sulfonic acids (β‐naphthalene sulfonic acid, camphor sulfonic acid, and p‐toluene sulfonic acid) were directly synthesized by using a new solid‐state polymerization method. The FTIR spectra, ultraviolet visibility (UV–vis) absorption spectra, and X‐ray diffraction patterns were used to characterize the molecular structures of the POT salts. Voltammetric study was done to investigate the electrochemical behaviors of all these POT salts. The FTIR and UV–vis absorption spectra revealed that the POT salts were composed of mixed oxidation state phases. All POT salts contained the conducting emeraldine salt (half‐oxidized and protonated form) phase; the pernigraniline (fully oxidized form) phase is predominant in POT doped with β‐naphthalene sulfonic acid, and POT doped with p‐toluene sulfonic acid had the highest doping level. The X‐ray diffraction patterns showed that the obtained POT doped with organic sulfonic acids were lower at crystallinity. The conductivity of the POT salts were found to be of the order 10^?3‐10^?4 S/cm. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1630–1634, 2005     

Preparation of chlorinated poly(vinyl chloride)‐g‐poly(N‐vinyl‐2‐pyrrolidinone) membranes and their water permeation properties

Chlorinated poly(vinyl chloride) (CPVC) membranes for microfiltration processes were prepared with the combined process of a solvent evaporation technique and the water‐vapor induced‐phase‐inversion method. CPVC membranes with a mean pore size of 0.7 μm were very hydrophobic. These membranes were subjected to surface modification by ultraviolet (UV)‐assisted graft polymerization with N‐vinyl‐2‐pyrrolidinone (NVP) to increase their surface wettability and decrease their adsorptive fouling. The grafting yields of the modified membranes were controlled by alteration of UV irradiation time and NVP monomer concentration. The changes in chemical structure between the CPVC membrane and the CPVC‐g‐poly(N‐vinyl‐2‐pyrrolidinone) membrane and the variation of the topologies of the modified PVC membranes were characterized by Fourier transform infrared spectroscopy, gel permeation chromatography, and field emission scanning electron microscopy. According to the results, the graft yield of the modified CPVC membrane reached a maximum at 5 min of UV exposure time and 20 vol % NVP concentration. The filtration behavior of these membranes was investigated with deionized water by a crossflow filtration measurement. The surface hydrophilicity and roughness were easily changed by the grafting of NVP on the surface of the CPVC membrane through a simultaneous irradiation grafting method by UV irradiation. To confirm the effect of grafting for filtration, we compared the unmodified and modified CPVC membranes with respect to their deionized water permeation by using crossflow filtration methods. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3188–3195, 2003     

Synthesis and evaluation of properties of poly(p‐phenylenevinylene) based 1,3,4‐oxadiazole systems for optoelectronics and nonlinear optical applications

Two new π‐conjugated polymers, namely poly(p‐phenylenevinylene‐1,3,4‐oxadiazole) (PPVO) and poly(p‐(nitro‐phenylene)vinylene‐1,3,4‐oxadiazole) (PNPVO), were synthesized and characterized. The Gilch polymerization technique, using dihalo derivatives of 1,3,4‐oxadiazoles, was employed to synthesize them under mild reaction conditions. The macromolecules exhibit good solubility in dimethylformamide, formamide and dimethyl sulfoxide and thus effectively address the insolubility issues associated with many oxadiazole derivatives for device fabrication. They show bright luminescence in the blue‐green region of the electromagnetic spectrum and have optical band gaps suited for an emissive layer in organic light‐emitting devices. PPVO and PNPPO show good non‐linear optical responses also in solution phase, with third‐order nonlinear susceptibilities of the order of 10^?12esu. Interestingly, they exhibit good antimicrobial characteristics under examination with Escherichia coli and Staphylococcus. The results prove that these macromolecules are ideal materials to use as emissive layers in various light‐emitting devices and NLO applications. The excellent antimicrobial activity can be utilized for their applications in clinical and healthcare areas. © 2016 Society of Chemical Industry     

Synthesis and thermal properties of poly(methyl methacrylate)‐poly(L‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer

Poly(methyl methacrylate)‐poly(L ‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer was prepared using atom transfer radical polymerization (ATRP). The structure and properties of the copolymer were analyzed using infrared spectroscopy, gel permeation chromatography, nuclear magnetic resonance (¹H‐NMR, ¹³C‐NMR), thermogravimetry, and differential scanning calorimetry. The kinetic plot for the ATRP of methyl methacrylate using poly(L ‐lactic acid) (PLLA) as the initiator shows that the reaction time increases linearly with ln[M]₀/[M]. The results indicate that it is possible to achieve grafted chains with well‐defined molecular weights, and block copolymers with narrowed molecular weight distributions. The thermal stability of PLLA is improved by copolymerization. A new wash‐extraction method for removing copper from the ATRP has also exhibits satisfactory results. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of poly(ester‐anhydride)s based on poly(ϵ‐caprolactone) prepolymer

The objective of this study was to prepare high molecular weight poly(ester‐anhydride)s by melt polycondensation. The polymerization procedure consisted of the preparation of carboxylic acid terminated poly(?‐caprolactone) prepolymers that were melt polymerized to poly(?‐caprolactone)s containing anhydride functions along the polymer backbone. Poly(?‐caprolactone) prepolymers were prepared using either 1,4‐butanediol or 4‐(hydroxymethyl)benzoic acid as initiators, yielding hydroxyl‐terminated intermediates that were then converted to carboxylic acid‐terminated prepolymers by reaction with succinic anhydride. Prepolymers were then allowed to react with an excess of acetic anhydride, followed by subsequent polycondensation to resulting high molecular weight poly(ester‐anhydride)s. Upon coupling of prepolymers, size exclusion chromatography analyses showed an increase from 3600 to 70,000 g/mol in number‐average molecular weight (M_n) for the 1,4‐butanediol initiated polymer, and an increase from 7200 to 68,000 g/mol for the 4‐(hydroxymethyl)benzoic acid‐initiated polymer. 4‐Hydroxybenzoic acid and adipic acid were also used as initiators in the preparation of poly(?‐caprolactone) prepolymers. However, with these initiators, the results were not satisfactory. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 176–185, 2001     

UV crosslinking of Fe3+‐doped poly(vinyl alcohol)—Characterization of optical properties and swelling behavior

The effects of UV irradiation on iron(III)chloride doped poly(vinyl alcohol) (PVA) films, using a high molar mass polymer, have been studied. It has been found that the polymer is oxidized and crosslinked during UV irradiation. UV/VIS spectra reveal an exponential loss of absorption at λ = 360 nm, and the refractive index of the PVA:FeCl₃ films decreases significantly during UV irradiation (Δn^D = ?0.09). The effects of crosslinking have been studied using the sol–gel technique, which revealed high gel contents due to doping and UV‐exposure. Photolithographic patterning of doped PVA films using a medium‐pressure mercury‐vapor UV source has been carried out, leading to good contrast behavior before and after development in aqueous media. A photobleaching effect was observed, therefore the curing of thicker films is feasible. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013