Fumed SiO2 nanoparticle reinforced biopolymer blend nanocomposites with high dielectric constant and low dielectric loss for flexible organic electronics

In the present study, fumed silica (SiO₂) nanoparticle reinforced poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) blend nanocomposite films were prepared via a simple solution‐blending technique. Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–vis), X‐ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to elucidate the successful incorporation of SiO₂ nanoparticles in the PVA/PVP blend matrix. A thermogravimetric analyzer was used to evaluate the thermal stability of the nanocomposites. The dielectric properties such as dielectric constant (?) and dielectric loss (tan δ) of the PVA/PVP/SiO₂ nanocomposite films were evaluated in the broadband frequency range of 10^?2 Hz to 20 MHz and for temperatures in the range 40–150 °C. The FTIR and UV–vis spectroscopy results implied the presence of hydrogen bonding interaction between SiO₂ and the PVA/PVP blend matrix. The XRD and SEM results revealed that SiO₂ nanoparticles were uniformly dispersed in the PVA/PVP blend matrix. The dielectric property analysis revealed that the dielectric constant values of the nanocomposites are higher than those of PVA/PVP blends. The maximum dielectric constant and the dielectric loss were 125 (10^?2 Hz, 150 °C) and 1.1 (10^?2 Hz, 70 °C), respectively, for PVA/PVP/SiO₂ nanocomposites with 25 wt % SiO₂ content. These results enable the preparation of dielectric nanocomposites using a facile solution‐casting method that exhibit the desirable dielectric performance for flexible organic electronics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44427.     

Dynamic mechanical analysis and broadband electromagnetic interference shielding characteristics of poly (vinyl alcohol)-poly (4-styrenesulfonic acid)-titanium dioxide nanoparticles based tertiary nanocomposites

ABSTRACT

Novel tertiary nanocomposite films comprising of poly (vinyl alcohol) (PVA), poly (4-styrenesulfonic acid) (PSSA) and titanium dioxide (TiO₂) nanoparticles (NP_S) were prepared using simple solvent casting method. The structural, thermal, morphological, thermo-mechanical and electromagnetic interference (EMI) shielding properties of PVA/PSSA/TiO₂ nanocomposite films were investigated. The EMI shielding effectiveness (SE) of PVA/PSSA/TiO₂ nanocomposite films in the X and Ku band was found to be 12 dB and 13 dB respectively at 25 wt% TiO₂ NPs loading. These results demonstrate the possible applications of PVA/PSSA/TiO₂ nanocomposite films as low cost, lightweight and flexible material for EMI shielding.     

Electromagnetic interference shielding properties of graphene quantum-dots reinforced poly(vinyl alcohol)/polypyrrole blend nanocomposites

Graphene quantum dots (GQDs) reinforced poly(vinyl alcohol) (PVA)/polypyrrole (WPPy) nanocomposite films with various GQDs loadings were synthesized using the versatile solvent casting method. The structural and morphological properties of PVA/WPPy/GQDs nanocomposite films were investigated by employing Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The thermogravimetric analysis revealed enhanced thermal stability of synthesized nanocomposites while enhanced dielectric properties were also observed. The maximum dielectric constant value for PVA/WPPy/GQDs nanocomposite films was observed to be ε = 6,311.85 (50 Hz, 150°C). The electromagnetic interference (EMI) shielding effectiveness (SE) of nanocomposite films was determined in the X-band (8–12 GHz) and Ku-band (12–18 GHz) frequency region. The EMI SE was found to be increased from 0.8 dB for the pure PVA film to 9.8 dB for the PVA/WPPy/GQDs nanocomposite film containing 10 wt% GQDs loading. The enhanced EMI shielding efficiency of nanocomposite films has resulted from the homogenous dispersion of GQDs in PVA/WPPy blend nanocomposites. Thus, the prepared nanocomposites are envisioned to utilize as a lightweight, flexible, and low-cost material for EMI shielding applications.     

Super‐tough biodegradable poly(vinyl alcohol)/poly(vinyl pyrrolidone) blends plasticized by glycerol and sorbitol

Tough biodegradable films were prepared using a poly(vinyl alcohol) (PVA)/poly(vinyl pyrrolidone) (PVP) (1:1) blend with plasticizers of glycerol (GLY), sorbitol (SOR), and their (one to one) mixture. We studied the effect of plasticization on the structural, thermal, and mechanical properties of the PVA/PVP blend films. Fourier transform infrared spectra indicated good miscibility of the two components due to the H‐bonding between the PVA and PVP molecules. The addition of plasticizers reduced the interaction between PVA and PVP, evidenced by an increase in the intensity of PVA diffraction peaks observed in the X‐ray diffraction (XRD) characterization. Thermal degradation of the blends increased as a function of the plasticizer used. GLY affected thermal degradation more than SOR and the mixtures. The incorporation of the plasticizers promoted the growth of PVA crystals as evidenced by XRD patterns and the enthalpy of fusion (ΔH_f) obtained by differential scanning calorimetry measurements. The introduction of SOR to the binary blend increased toughness seven times and imparted simultaneous and pronounced improvements to maximum tensile stress and elongation at break. This behavior holds out great promise for the development of a new generation of mechanically robust, yet thoroughly biodegradable materials that could effectively supplant conventional polymers in demanding applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46406.     

Preparation and characterization of graphene/poly(vinyl alcohol) nanocomposites

Graphene (GE)‐based nanocomposites are emerging as a new class of materials that hold promise for many applications. In this article, we present a general approach for the preparation of GE/poly(vinyl alcohol) (PVA) nanocomposites. The basic strategy involved the preparation of graphite oxide from graphite, complete exfoliation of graphite oxide into graphene oxide sheets, followed by reduction to GE nanosheets, and finally, the preparation of the GE/PVA nanocomposites by a simple solution‐mixing method. The synthesized products were characterized by X‐ray diffraction, field emission scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetry, and differential scanning calorimetry analysis. The GE nanosheets were well dispersed in the PVA matrix, and the restacking of the GE sheets was effectively prevented. Because of the strong interfacial interaction between PVA and GE, which mainly resulted from the hydrogen‐bond interaction, together with the improvement in the PVA crystallinity, the mechanical properties and thermal stability of the nanocomposites were obviously improved. The tensile strength was increased from 23 MPa for PVA to 49.5 MPa for the nanocomposite with a 3.25 wt % GE loading. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermal and spectroscopic studies of poly(N‐vinyl pyrrolidone)/poly(vinyl alcohol) blend films

Poly(N‐vinyl pyrrolidone) (PVP) and poly (vinyl alcohol) (PVA) homopolymers and their blended samples with different compositions were prepared using cast technique and subjected to X‐ray diffraction (XRD) measurements, infrared (IR) spectroscopy, ultraviolet/visible spectroscopy, and thermogravimetric analysis (TGA). XRD patterns of homopolymers and their blended samples indicated that blending amorphous materials, such as PVP, with semicrystalline polymer, such as PVA, gives rise to an amorphous structure with two halo peaks at positions identical to those found in pure PVP. Identification of structure and assignments of the most evident IR ‐ absorption bands of PVP and PVA as well as their blends in the range 400–2000 cm^?1 were studied. UV–vis spectra were used to study absorption spectra and estimate the values of absorption edge, E_g, and band tail, E_e, for all samples. Making use of Coats‐Redfern relation, thermogravimetric (TG) data allowed the calculation of the values of some thermodynamic parameters, such as activation energy E, entropy ΔS^#, enthalpy ΔH, and free energy of activation ΔG^# for different decomposition steps in the samples under investigation. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterizations of magnetite nanocomposite films for radiation shielding

Polyvinyl alcohol (PVA) films containing magnetite Fe₃O₄ nanoparticles have been prepared by co‐precipitation method for use in gamma ray shielding and protection. Characterizations of the magnetite/PVA nanocomposite films were investigated by X‐ray diffraction (XRD), transmission electron microscopy (TEM), UV–vis spectroscopy, and magnetization measurements. TEM images showed that the synthesized magnetite particles had about 6–11 nm dimensions. Optical study's results revealed that the optical energy band gaps of thin films range between 1.82 and 2.81 eV at room temperature using UV–visible absorption spectroscopy. The saturation magnetization (MS) value measured by vibrating sample magnetometer VSM was found to be 8.1 emu/g with superparamagnetic nature. The radiation shielding properties such as linear attenuation coefficients (μ ) and half‐value thickness (HVT) for the magnetite nanocomposite films have been obtained experimentally for different photon energies. The results imply that these nanocomposites films are promising radiation shielding materials. POLYM. COMPOS., 38:974–980, 2017. © 2015 Society of Plastics Engineers     

Efficient preparation of hybrid nanocomposite coatings based on poly(vinyl alcohol) and silane coupling agent modified TiO2 nanoparticles

In the present investigation, at first, the surface of titanium dioxide (TiO₂) nanoparticles was modified with γ-aminopropyltriethoxy silane as a coupling agent. Then a new kind of poly(vinyl alcohol)/titanium dioxide (PVA/TiO₂) nanocomposites coating with different modified TiO₂ loading were prepared under ultrasonic irradiation process. Finally, these nanocomposites coating were used for fabrication of PVA/TiO₂ films via solution casting method. The resulting nanocomposites were fully characterized by Fourier transform infrared spectroscopy (FT-IR), powder X-ray diffraction (XRD), thermogravimetric analysis/derivative thermal gravimetric (TGA/DTG), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The TEM and SEM results indicated that the surface modified nanoparticles were dispersed homogeneously in PVA matrix on nanoscale and based on obtained results a possible mechanism was proposed for ultrasonic induced nanocomposite fabrication. TGA confirmed that the heat stability of the nanocomposite was improved. UV–vis spectroscopy was employed to evaluate the absorbance and transmittance behavior of the PVA/TiO₂ nanocomposite films in the wavelength range of 200–800 nm. The results showed that this type of films could be used as a coating to shield against UV light.     

Structural characterization of hydrophilic polymer blends/montmorillonite clay nanocomposites

The nanocomposite films comprising polymer blends of poly(vinyl alcohol) (PVA), poly(vinyl pyrrolidone) (PVP), poly(ethylene oxide) (PEO), and poly(ethylene glycol) (PEG) with montmorillonite (MMT) clay as nanofiller were prepared by aqueous solution casting method. The X‐ray diffraction studies of the PVA–x wt % MMT, (PVA–PVP)–x wt % MMT, (PVA–PEO)–x wt % MMT and (PVA–PEG)–x wt % MMT nanocomposites containing MMT concentrations x = 1, 2, 3, 5 and 10 wt % of the polymer weight were carried out in the angular range (2θ) of 3.8–30°. The values of MMT basal spacing d₀₀₁, expansion of clay gallery width W_cg, d‐spacing of polymer spherulite, crystallite size L and diffraction peak intensity I were determined for these nanocomposites. The values of structural parameters reveal that the linear chain PEO and PEG in the PVA blend based nanocomposites promote the amount of MMT intercalated structures, and these structures are found relatively higher for the (PVA–PEO)–x wt % MMT nanocomposites. It is observed that the presence of bulky ester‐side group in PVP backbone restricts its intercalation, whereas the adsorption behavior of PVP on the MMT nanosheets mainly results the MMT exfoliated structures in the (PVA–PVP)–x wt % MMT nanocomposites. The crystallinities of the PEO and PEG were found low due to their blending with PVA, which further decreased anomalously with the increase of MMT concentration in the nanocomposites. The decrease of polymer crystalline phase of these materials confirmed their suitability in preparation of novel solid polymer nanocomposite electrolytes. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40617.     

Effective methodology for the production of novel nanocomposite films based on poly(vinyl chloride) and zinc oxide nanoparticles modified with green poly(vinyl alcohol)

Ultrasonic irradiation and solution dispersion methods were used to organize transparent worthwhile poly(vinyl chloride) (PVC) nanocomposite (NC) films which contain different amounts of modified zinc oxide nanoparticles (NP)s. First, modification of ZnO NPs was accomplished by biocompatible poly(vinyl alcohol) (PVA) to increase NCs compatibility and dispersity in the PVC matrix. The investigation followed by the fabrication and characterization of PVC/ZnO‐PVA NCs which obtained via fast and facile ultrasonication irradiation. The measurements of X‐ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and field emission scanning electron microscopy were used for the characterization of properties, structure and morphology of the obtained NPs and their NCs. Furthermore, thermal and optical properties of the resulting NCs were also carried out by thermogravimetric analysis, ultraviolet‐visible transmission, and absorption spectra. Morphology results demonstrate well‐dispersed characteristics of ZnO‐PVA NPs incorporated in the PVC matrix which resulted from modification. Also, modified ZnO NPs enhanced mechanical properties of prepared NC films. Prepared NCs could be categorized as self‐extinguishing materials on the basis of the limiting oxygen index values. POLYM. COMPOS., 38:1800–1809, 2017. © 2015 Society of Plastics Engineers     

Preparation,characterization, electrical and antibacterial properties of sericin/poly(vinyl alcohol)/poly(vinyl pyrrolidone) composites

In this study, we focused on the fabrication of poly(vinyl alcohol) (PVA)/poly(vinyl pyrrolidone) (PVP)/sericin composites via a simple solution‐blending method. The composites were characterized by Fourier transform infrared (FTIR) spectroscopy, UV spectroscopy, X‐ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry, thermogravimetric analysis (TGA), and measurements of the conductivity, tensile strength, and antibacterial activity against Staphylococcus aureus. The results of FTIR and UV spectroscopy implied the occurrence of hydrogen bonding between sericin and the PVA/PVP blend. The structure and morphology, studied by XRD and SEM, revealed that the sericin particles were well dispersed and arranged in an orderly fashion in the blend. The glass‐transition temperature (T_g) of the composite was higher than that of the pure blend, and the T_g value shifted toward higher temperatures when the volume fraction of sericin increased. TGA indicated that sericin retarded the thermal degradation; this depended on the filler concentration. The mechanical and electrical properties, such as the tensile strength, alternating‐current electrical conductivity, dielectric constant, and dielectric loss of the composites, were higher than those of the pure blend, and these properties were enhanced when the concentration of sericin was increased up to 10 wt % filler content, whereas the elongation at break of the composite decreased with the addition of sericin particles. The antibacterial properties of the composite showed that sericin had a significant inhibitory effect against S. aureus. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43535.     

Biomodification of cloisite Na+ with L‐methionine amino acid and preparation of poly(vinyl alcohol)/organoclay nanocomposite films

Polymer/layered‐silicate hybrids nanocomposites have attracted strong interest in today's materials research, as it is possible to achieve impressive enhancements of material properties compared to the pure polymers. In the present investigation, at first, Cloisite Na⁺ was modified by protonated form of natural L ‐methionine amino acid via ion‐exchange reaction to created chiral organonanoclay. Gallery spacing, interlamellar structure, and thermal stability of this novel chiral organonanoclay have been characterized using different techniques. Then it was used to fabrication of poly(vinyl alcohol) (PVA)/organonanoclay nanocomposite films (NCF)s with various compositions using solution casting method by ultrasound‐assisted method. The films were characterized using Fourier transform infrared spectroscopy, X‐ray diffraction (XRD), scanning electronic microscopy, and transmission electronic microscopy (TEM). Furthermore, thermal and optical clarity properties were investigated by thermogravimetric analysis and UV–visible transmission spectra, respectively. The TEM and XRD structure study revealed a coexistence of exfoliated and intercalated organonanoclay in the PVA matrix. The addition of organoclay into the PVA origins increases in the thermal decomposition temperatures of the NCFs. This enhancement in the thermal stability is owing to the presence of organonanoclay, which act as barriers to maximize the heat insulation and to minimize the permeability of volatile degradation products to the material. At the same time, the optical clarity of PVA/organonanoclay NCFs is not decreased in comparison with that of pure PVA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

A chitosan/poly(vinyl alcohol) nanocomposite film reinforced with natural halloysite nanotubes

Biodegradable polymer/clay nanocomposites have attracted tremendous attentions because of their excellent properties and ecofriendly advantages. In this article, a series of nanocomposite films were prepared by introducing of halloysite nanotubes (HTs) into chitosan (CS)/poly(vinyl alcohol) (PVA) matrix using the solution casting method, and the effect of HT as nanofillers on the properties of polymer/HT nanocomposites was explored. The results indicated that the tensile strength of CS/PVA/HT3 and elongation at break of CS/PVA/HT2 sharply increased by 39.72% and 26.14% in comparison with the pure CS/PVA film, respectively. The water resistance and thermal stability of polymer/HT nanocomposites were also improved compared with the pure CS/PVA film, but the optical property of the nanocomposite films was not affected by introducing HT into the CS/PVA matrix. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Polymer Nanocomposites based on Modified ZrO2 NPs and Poly(vinyl alcohol)/Poly(vinyl pyrrolidone) Blend: Optical,Morphological, and Thermal Properties

Nanocomposite films were prepared successfully by simple solution casting method from the blend of poly(vinyl alcohol) and poly(vinyl pyrrolidone) as the polymer matrix and functionalized ZrO₂ nanoparticles as nanofiller. To prevent aggregation and improve the dispersion of nanoparticles into the matrix, ZrO₂ nanoparticles were functionalized with citric acid and ascorbic acid. Then, nanocomposites were fabricated by adding different contents of modified nanoparticles into the poly(vinyl alcohol)–poly(vinyl pyrrolidone) matrix. Thermal stability of the obtained nanocomposite films was improved in comparison to the pure blend. Furthermore, optical property of nanocomposites makes them a potential candidate for ultraviolet shielding material.     

Fabrication and characterization of electrospun fibrous nanocomposite scaffolds based on poly(lactide‐co‐glycolide)/poly(vinyl alcohol) blends

Tissue engineering involves the fabrication of three‐dimensional scaffolds to support cellular in‐growth and proliferation. Ideally, the scaffolds should be similar to the native extracellular matrix (ECM). Electrospun polymer nanofibrous scaffolds are appropriate candidates for ECM mimetic materials since they mimic the nanoscale properties of ECM. Electrospun polymer nanocomposites based on poly(lactide‐co‐glycolide) (PLGA)/poly(vinyl alcohol) (PVA) and organically modified montmorillonite (OMMT) were prepared by a solution intercalation technique followed by electrospinning. The morphology of fibrous scaffolds based on these nanocomposites was investigated using scanning electron microscopy. The scaffolds showed highly porous structure within the nanofibres of diameters ranging from 400 to 700 nm. X‐ray diffractometry gave evidence of good dispersion of the OMMT in the blends with exfoliated morphology. Measurements of the water uptake and water contact angle of the fibrous scaffolds indicated significant improvement in the hydrophilicity of the scaffolds. Evaluations of the mechanical properties and unrestricted somatic stem cell culture of the electrospun fibrous nanocomposite scaffolds revealed that the PLGA90/PVA10/1.5% OMMT and PLGA90/PVA10/3% OMMT samples are the most useful from the tissue engineering application viewpoint. Copyright © 2010 Society of Chemical Industry     

Convenient approach to making nanocomposites based on a chitosan–poly(vinyl pyrrolidone) polymer matrix and a graphene nanofiller

Conducting, mechanically durable, elastic nanocomposite films were prepared with chitosan (CS) as the polymer matrix, graphene obtained from highly exfoliated graphite as the nanofiller, and poly(vinyl pyrrolidone) (PVP) as the stabilizer of the graphene sheets. The maximum graphene content in the composites without a loss of uniformity and other useful properties increased up to 4.0 wt %. The resulting composites were characterized by scanning electron microscopy, Raman spectroscopy, X‐ray diffraction analysis, mechanical testing, and electrical conductivity testing to determine the effects of the addition of graphene on the morphology and mechanical and electrical properties of the CS–PVP–graphene nanocomposite films. In this study, we took an approach to making nanocomposites from the perspectives of green chemistry, environmental protection, regenerative medicine, and low cost. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45038.     

Synthesis and characterization of konjac glucomannan/poly(vinyl alcohol) interpenetrating polymer networks

Novel interpenetrating polymer networks (IPNs) coded as KP were synthesized successfully from poly(vinyl alcohol) (PVA) and konjac glucomannan (KGM) in the presence of glutaraldehyde as a crosslink agent. The transparent IPN films that were 40 μm thick were prepared by means of conventional solvent‐casting technique and dried at room temperature for 2 days. The structure and miscibility of the KP films were studied by Fourier transformed infrared spectra, scanning electron microscopy, differential scanning calorimetry, wide‐angle X‐ray diffraction, and ultraviolet visible spectroscopy (UV–Vis). The results indicated that strong intermolecular interaction caused by crosslink bonding between PVA and KGM occurred in the IPN films, resulting in wonderful miscibility when the reaction time is 4 h. The tensile strength, elongation at break, and moisture uptake was much higher than that of the pure PVA film, KGM film, and uncrosslinked blend films. In other words, the structure of IPN endowed the films with excellent performance, so the new material has promising applications to food package film and agricultural film because of its biodegradability. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2775–2780, 2004     

Nanofibrillated cellulose,poly(vinyl alcohol), montmorillonite clay hybrid nanocomposites with superior barrier and thermomechanical properties

Nanocomposites of poly(vinyl alcohol) (PVA), nanofibrillated cellulose (NFC), and montmorillonite (MMT) clay were prepared via solvent casting. In addition to investigating the effect of clay loading, PVA matrices crosslinked with poly(acrylic acid) (PAA) were prepared and compared with linear (noncrosslinked) PVA nanocomposites. ¹³C NMR and infrared spectroscopy confirmed the presence of crosslinks. Scanning electron microscopy revealed effective NFC and MMT clay dispersion throughout the nanocomposites, while X‐ray diffraction highlighted the effectiveness of PAA to encourage clay dispersion. MMT clay provided a barrier against the diffusion of water and oxygen (molecules) through the nanocomposite films. Permeability and adsorption were further reduced by crosslinking, while oxygen barrier properties were remarkably enhanced at elevated relative humidities. Thermal stability of the PVA segments was strengthened by the presence of MMT clay and crosslinks. MMT clay–reinforced PVA and NFC within the films, increasing the Young's modulus, tensile strength, and glass transition temperature. Crosslinking further enhanced the thermomechanical properties by imparting physical restraints on polymer chain segments, providing elasticity, and ductility. The hybrid films were successfully reinforced at elevated humidities, with nanocomposites displaying enhanced storage moduli and near‐complete recovery. POLYM. COMPOS., 35:1117–1131, 2014. © 2013 Society of Plastics Engineers     

Thermal and optical properties of gelatin/poly(vinyl alcohol) blends

Differential scanning calorimetry, thermogravimetric analysis, X‐ray diffraction, and ultraviolet–visible spectroscopy of gelatin and poly(vinyl alcohol) (PVA) homopolymers and their blended samples were studied. The data revealed that the gelatin and PVA polymers were compatible over the investigated range of compositions; this contributed to the formation of hydrogen‐bonding interaction between their polar groups. The associated enthalpy‐of‐melting transition and thermal stability of the blended samples increased with increasing PVA content. This indicated that the crystalline structure of PVA was not destroyed completely in the blends, which was consistent with the X‐ray diffraction pattern of the 50/50 (wt %/wt %) blended gelatin/PVA sample. The absorption edge and optical band gap for allowed direct transition were determined from ultraviolet–visible spectra. The induced changes in the band structure are elucidated. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Nanocomposite films of poly(vinylidene fluoride) filled with polyvinylpyrrolidone‐coated multiwalled carbon nanotubes: Enhancement of β‐polymorph formation and tensile properties

To improve interactions between carbon nanotubes (CNTs) and poly(vinylidene fluoride) (PVDF) matrix, multiwalled CNTs (MWCNTs) were successfully coated with amphiphilic polyvinylpyrrolidone (PVP) using an ultrasonication treatment performed in aqueous solution. It was found that PVP chains could be attached noncovalently onto the nanotubes' surface, enabling a stable dispersion of MWCNTs in both water and N,N‐dimethylformamide. PVP‐coated MWCNTs/PVDF nanocomposite films were prepared by a solution casting method. The strong specific dipolar interaction between the PVP's carbonyl group (C?O) and the PVDF's fluorine group C?F₂ results in high compatibility between PVP and PVDF, helping PVP‐coated MWCNTs to be homogenously dispersed within PVDF. Fourier transform infrared and X‐ray diffraction characterization revealed that the as‐prepared nanocomposite PVDF films exhibit a purely β‐polymorph even at a very low content of PVP‐wrapped MWCNTs (0.1 wt%) while this phase is totally absent in the corresponding unmodified MWCNTs/PVDF nanocomposites. A possible mechanism of β‐phase formation in PVP‐coated MWCNTs/PVDF nanocomposites has been discussed. Furthermore, the tensile properties of PVDF nanocomposites as function of the content in PVP‐coated MWCNTs were also studied. Results shows that the addition of 2.0 wt% of PVP‐coated MWCNTs lead to a 168% increase in Young's modulus and a 120% in tensile strength. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers