Modification of maleic anhydride–styrene copolymer with noradrenaline by chemical and enzymatic methods

Maleic anhydride copolymer was modified with another biologically active agent, noradrenaline (NA), using both chemical and enzymatic methods. The modification and synthesized products were named as follows: chemical modification, MASTNAc; enzymatic modification, MASTNAe; enzymatically synthesized MASTNA from individual monomers, MASTNAem. Chemical and enzymatic reactions were performed at 70°C and 38°C, respectively. In the chemical reactions azobisisobutyronitrile was used as the initiator. In the enzymatic reactions, an extracellular extract, including an enzyme with peroxidase‐like activity, was used. All the reactions were performed in an organic medium, methyl ethyl ketone. Structural characterization of the copolymer and modified copolymer were carried out by Fourier transform infrared (FTIR) and nuclear magnetic resonance (¹H NMR). FTIR and ¹H NMR spectra confirmed that NA was successfully covalently bound onto the MAST copolymer backbone by both chemical and enzymatic methods. Surface morphology of the samples was studied by scanning electron microscopy. Results obtained indicated that chemical and enzymatic addition of NA to MAST backbone yielded products having quite similar physical and chemical properties. On the other hand, MASTNA‐modified copolymer synthesized by individual monomers appeared to be different in its chemical structure. Furthermore, enzymatic modification and synthesis appeared to provide a good alternative method because it required much milder conditions such as low temperature, and better product qualities: higher solubility in water, higher yield and purity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and properties of a novel (main‐chain)– (side‐chain) polymeric peroxide

A novel (main‐chain)‐(side‐chain) vinyl polyperoxide, poly(dipentene peroxide) (PDP), an alternating copolymer of dipentene (DP) and oxygen, has been synthesized by thermal oxidative polymerization of DP. The PDP was characterized by ¹H NMR, ¹³C NMR, FTIR, DSC, TGA, and EI‐MS studies. The overall activation energies of the degradation from Kissinger's method were 28 and 33 kcal/mol, respectively, for the endocyclic and acyclic peroxide units. The side‐chain peroxy groups were found to be thermally more stable than the main chain. Above 45°C the rate of polymerization increases sharply at a particular instant showing an “autoacceleration” with the formation of knee point. The kinetics of autoacceleration has been studied at various temperatures (45–70°C) and pressures (50–250 psi). © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1549–1555, 2001     

Synthesis and biodegradability evaluation of 2‐methylene‐1,3‐dioxepane and styrene copolymers

Biodegradable copolymers of 2‐methylene‐1,3‐dioxepane (MDO) and styrene (ST) were synthesized by free‐radical copolymerization using di‐t‐butyl peroxide (DTBP) as the initiator. The copolymers containing ester units were characterized by Fourier transform infrared (FTIR), ¹H‐NMR, and ¹³C‐NMR spectroscopy. Their molecular weight and polydispersity index were determined by gel permeation chromatography (GPC). In vitro enzymatic degradation of poly(MDO‐co‐ST) was performed at 37°C in phosphate buffer solution (PBS, pH = 7.4) in the presence of Pseudomonas lipase or crude enzyme extracted from earthworm. The experiment showed that incorporating ester units into C? C backbone chain of polystyrene would result in a biodegradable copolymer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1146–1151, 2007     

Synthesis and characterization of poly[4‐(2‐thiazolylazo)phenyl methacrylate]‐co‐poly(methyl methacrylate)

A new methacrylic monomer, 4‐(2‐thiazolylazo)phenylmethacrylate (TPMA) was synthesized. Copolymerization of the monomer with methyl methacrylate (MMA) was carried out by free radical polymerization in THF solution at 70 ± 0.5°C, using azobisisobutyronitrile (AIBN) as an initiator. The monomer TPMA and the copolymer poly(TPMA‐co‐MMA) were characterized by Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (NMR), and elemental analysis methods. The polydispersity index of the copolymer was determined using gel permeation chromatography (GPC). Thermogravimetric analysis (TGA) of the copolymer performed in nitrogen revealed that the copolymer was stable to 270°C. The glass transition temperature (T_g) of the copolymer was higher than that of PMMA. The copolymer with a pendent aromatic heterocyclic group can be dissolved in common organic solvents and shows a good film‐forming ability. Both the monomer TPMA and the copolymer poly (TPMA‐co‐MMA) have bright colors: orange and yellow, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2152–2157, 2007     

Cashew nut shell liquid based t‐BOC protected alternating “high ortho” copolymer as a possible e‐beam resist: Characterization using multi‐dimensional NMR spectroscopy

A cardanol/m‐cresol‐based copolymer was esterified using di‐tert‐butyl dicarbonate (t‐BOC), which makes it a suitable candidate as a possible e‐beam resists. This work reports a full characterization of the product using the techniques of FTIR and UV–Visible spectroscopy, one dimensional ¹H NMR, ¹³C NMR, DEPT‐135. Two dimensional NMR experiments such as, COSY, HSQC, and HMBC have been employed for exhaustive probing of the microstructural details of this derivatized copolymer. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and characterization of acrylonitrile‐ethyl methacrylate copolymers and the effect of LiClO4 salt on electrical properties of copolymer films

Copolymers of poly(acrylonitrile‐co‐ethyl methacrylate), P(AN‐EMA), with three different EMA content and parent homopolymers were synthesized by emulsion polymerization. The chemical composition of copolymers were identified by FTIR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The thermal properties of copolymers were modified by changing the EMA content in copolymer compositions. Various amounts of LiClO₄ salt loaded (PAN‐co‐PEMA) copolymer films were prepared by solution casting. The dielectric properties of these films at different temperatures and frequencies were investigated. It was found that the dielectric constant and ac‐conductivity of copolymer films were strongly influenced by the salt amounts and EMA content in copolymers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of new blue‐photoluminescent copolymer derived from bisphenol A

A new copolymer with short alternating conjugated and nonconjugated blocks, derived from bisphenol A (BPAEt₂‐PPV) containing separated phenylenevinylene (PV) units has been synthesized by Wittig condensation. The copolymer is fully soluble in common organic solvents and has a number‐average molecular weight of 3200 with a polydispersity index of 1.53. The structure of the polymer was confirmed by ¹H NMR, ¹³C NMR, FTIR and Raman spectroscopic analysis. Thermogravimetric analysis and differential scanning calorimetry indicate that BPAEt₂‐PPV is stable up to 400°C in air and displays a glass transition temperature of 107°C. The fluorescence spectrum of the polymer film shows an emission in the blue region (428, 456, and 488 nm). The band‐gap energy, estimated from the edge absorption of the film, is about 2.9 eV. A single‐layer diode device of the configuration ITO/BPAEt₂‐PPV/Al has been fabricated and has a relatively low turn‐on voltage of 3.7 V. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Study on the Azido‐Tetrazolo Tautomerizations of 3,6‐Bis(azido)‐1,2,4,5‐tetrazine

The azido‐tetrazolo tautomerizations of 3,6‐diazido‐1,2,4,5‐tetrazine (DIAT) in different solvents were investigated with HPLC and ¹³C NMR spectroscopy. 6‐Amino‐tetrazolo[1,5‐b]‐1,2,4,5‐tetrazine (ATTZ) was irreversibly formed as the final product by azido‐cyclization following N₂ elimination from one of the azido substituents at room temperature in DMSO. The structure of ATTZ was characterized by X‐ray crystallography; differential scanning calorimetry (DSC), mass spectrometry, as well as IR and ¹H NMR and ¹³C NMR spectroscopy. The crystal density was found to be 1.272 g cm⁻³. DSC result suggested that ATTZ with the melting point of 84 °C strongly decomposes with explosion at 198 °C, which can be regarded as a primary explosive.     

Synthesis,characterization and thermal degradation of poly[2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate]

In this work, 2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate (BPHEMA) [monomer] was synthesized by the addition of methacrylic acid to 1‐epoxyethyl‐3‐bromophenyl‐3‐methyl cyclobutane. The monomer and poly(BPHEMA) were characterized by FT‐IR and [¹H] and [¹³C]NMR. Average molecular weight, glass transition temperature, solubility parameter, and density of the polymer were also determined. Thermal degradation of poly[BPHEMA] was studied by thermogravimetry (TG), FT‐IR. Programmed heating was carried out at 10 °C min⁻¹ from room temperature to 500 °C. The partially degraded polymer was examined by FT‐IR spectroscopy. The degradation products were identified by using FT‐IR, [¹H] and [¹³C]NMR and GC‐MS techniques. Depolymerization is the main reaction in thermal degradation of the polymer up to about 300 °C. Percentage of the monomer in CRF (Cold Ring Fraction) was estimated at 33% in the peak area of the GC curve. Intramolecular cyclization and cyclic anhydride type structures were observed at temperatures above 300 °C. The liquid products of the degradation, formation of anhydride ring structures and mechanism of degradation are discussed. © 1999 Society of Chemical Industry     

The architecture of hydroxy‐functionalized aPS‐b‐random copolymer‐b‐PE via one‐pot strategy combining living free radical polymerization with coordination polymerization

The copolymerization of styrene with ethylene was promoted by CpTiCl₃/BDGE/Zn/MAO catalyst system combining free radical polymerization with coordination polymerization via sequential monomer addition strategy in one‐pot. The effect of polymerization conditions such as temperature, time, ethylene pressure, and Al/Ti molar ratio on the polymerization performance was investigated. The hydroxy‐functionalized aPS‐b‐random copolymer‐b‐PE triblock copolymer was obtained by solvent extraction and determined by GPC, DSC, WAXD, and ¹³C‐NMR. The DSC result indicated that the aPS‐b‐random copolymer‐b‐PE had a T_g at 87°C and a T_m at 119°C which attributed to the T_g of aPS segment and the T_m of PE segment, respectively. The microstructure of the hydroxy‐functionalized aPS‐b‐random copolymer‐b‐PE was further confirmed by WAXD, ¹³C‐NMR, and ¹H‐NMR analysis; and these results demonstrated that the obtained block copolymer consisted of aPS segment, S‐E random copolymer segment, and crystalline PE segment. The connection polymerization of the hydroxy‐functionalized aPS with random copolymer‐b‐PE was revealed by GPC results. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

The synthesis and application of Pb‐doped GLYMO/chelated‐zirconium complex coating materials for UV‐light absorption

New glass coating materials containing γ‐glycidoxypropyltrimethoxy‐silane/zirconium(IV)‐n‐propoxide(2‐methoxyethylacetoacetate)/lead(II) nitrate were developed for UV‐light absorption by sol‐gel process. The effect of agitation time, temperature, and Zr complex and Pb²⁺ ion concentrations on UV light absorption were investigated. Zr complex was characterized by using ¹H‐NMR, ¹³C‐NMR, and FTIR spectroscopy. Ultraviolet visible spectroscopy was utilized to determine the optical properties of coating materials. Results showed that coated glass has very low transmission in the UV region (300–400 nm) relative to uncoated glass, especially at 150°C for 15 h agitation. UV light transmission of coated glasses treated at 80, 100, 450, or 500°C was not different from uncoated glass. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1175–1179, 2006     

High‐temperature resistance water‐soluble copolymer derived from acrylamide,DMDAAC, and functionalized sulfonamide for potential application in enhance oil recovery

A water‐soluble poly(AM‐AA‐DMDAAC‐TCAP) was prepared using acrylamide (AM), acrylic acid (AA), diallyl dimethyl ammonium chloride (DMDAAC), and N‐allyl‐4‐methylbenzenesulfonamide (TCAP), and the synthesis conditions were investigated. The obtained copolymer was characterized by FTIR, ¹H‐NMR, SEM, TG, and XRD. The temperature resistance and thickening function of the copolymer are improved significantly compared with that of partially hydrolyzed polyacrylamide. It is found that the viscosity of copolymer could achieve up to 53.3% retention rate at 120°C compared to that at 30°C. About 16.6% for enhanced oil recovery is obtained by poly(AM‐AA‐DMDAAC‐TCAP) brine solution at 65°C. In addition, the results of XRD show that 3000 mg/L copolymer combined with 10 wt % KCl solution could reduce the d‐spacing of sodium montmorillonite from 18.94 to 14.86 Å exhibiting remarkable effect on inhibiting hydration of clays. All the results demonstrate that poly(AM‐AA‐DMDAAC‐TCAP) have excellent performance for potential application in enhance oil recovery. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40727.     

Functional copolymers of p‐cumyl phenyl methacrylate and glycidyl methacrylate: Synthesis,characterization, and reactivity ratios

Free‐radical polymerization of p‐cumyl phenyl methacrylate (CPMA) was performed in benzene using bezoyl peroxide as an initiator at 80°C. The effect of time on the molecular weight was studied. Functional copolymers of CPMA and glycidyl methacrylate (GMA) with different feed ratios were synthesized by free‐radical polymerization in methyl ethyl ketone at 70°C, and they were characterized by FTIR and ¹H‐NMR spectroscopy. The molecular weights and polydispersity indexes of the polymers and copolymers were determined by gel permeation chromatography. The copolymer composition was determined by ¹H‐NMR. The glass‐transition temperature of the polymer and the copolymers was determined by differential scanning calorimetry. The reactivity ratios of the monomers were determined by the Fineman–Ross and Kelen–Tudos methods. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 336–347, 2005     

Synthesis and properties of elastic polyurethane‐imide

A new synthesis route for elastic polyurethane‐imides (EPUIs) has been established by a method involving the use of urea. Various EPUIs were synthesized from polyurethane‐urea, which was prepared from 4,4′‐diphenylmethane diisocyanate (MDI), polyoxytetramethylene glycol (PTMG) and 4,4′‐diphenylmethanediamine (MDA), and pyromellitic dianhydride in N‐methyl‐2‐pyrrolidone (NMP). Flexible films were cast from these solutions that had different inherent viscosities. Imidization of the EPUI films was completed at 200°C for 4 h in vacuo. The EPUIs were determined by FTIR, ¹H NMR, and ¹³C NMR spectra. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and Characterization of 3,3′‐Bisazidomethyl Oxetane‐3‐Azidomethyl‐3′‐Methyl Oxetane Alternative Block Energetic Thermoplastic Elastomer

3,3′‐Bisazidomethyl oxetane‐3‐azidomethyl‐3′‐methyl oxetane (BAMO‐AMMO) tri‐block copolymer was successfully synthesized by azidation of a polymeric substrate containing bromo leaving groups, and an alternative block energetic thermoplastic elastomer (ETPE) was prepared by chain extension reaction. The tri‐block copolymer was characterized by Fourier transform infrared (FTIR), ¹H NMR, and ¹³C NMR spectroscopy, X‐ray diffraction (XRD), and thermogravimetric analysis (TGA). It was found that the composition of the copolymer is nearly 1 : 1; crystallinity of the copolymer (71.81 %) is less than that of PBAMO (78.30 %). This is due to a partly mixture between soft and hard segments. Kinetic result shows that a crosslinking network is formed after the decomposition of azide group. Tensile strength of alternative block ETPE is 150 % of traditionally synthesized BAMO‐AMMO ETPE.     

Synthesis of UV‐curable difunctional silane monomer based on 3‐methacryloxy propyl trimethoxysilane (3‐MPTS) and its UV‐curing characteristics and thermal stability

In the present investigation, silicon containing UV‐curable difunctional monomer was synthesized by reacting 3‐methacryloxy propyl trimethoxysilane (3‐MPTS) with acrylic acid using anhydrous ether as a solvent under inert atmosphere. The synthesized acryloxymethacryloxy silane monomer was characterized by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy. The silane monomer along with 4 wt % photoinitiator (Darocure 1173) was cured under UV‐light for different exposure time. The curing characteristic of the monomer was investigated using FTIR spectroscopy. The conversion of the double bond due to curing has been evaluated from the peak intensity of the C?C double bond (at 1636 cm^?1) in the FTIR spectrum considering the peak intensity at 1720 cm^?1 due to C?O as internal standard. The maximum double bond conversion is observed to be 72%. The optimum cure time for the silane monomer has been estimated to be 7.8 sec. The UV‐cured sample decomposes at 440°C. The char residue is 35% at 700°C. The synthesized UV‐curable silane monomer may be useful for UV‐coating formulations, for fabrication of 3D‐objects by lithographic technique and as a precursor for organic–inorganic hybrid materials. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of Poly(3,3‐Bis‐Azidomethyl Oxetane) via Direct Azidation of Poly(3,3‐Bis‐Bromo Oxetane)

In order to avoid using highly unstable and sensitive monomer 3,3‐bis‐azidomethyl oxetane, poly(3,3‐bis‐azidomethyl oxetane) (PBAMO) was successfully synthesized via azidation of poly(3,3‐bis‐bromo oxetane) (PBBrMO) in the aprotic and polar solvent cyclohexanone in the presence of a catalyst. It was found that the azidation proceeded very fast and almost completed in 6 h when the reaction temperature was up to 115 °C. PBAMO was characterized by gel permeation chromatography (GPC), Fourier transform infrared spectrometry (FTIR), hydrogen nuclear magnetic resonance (¹H NMR), and carbon nuclear magnetic resonance (¹³C NMR).     

Synthesis and characterization of heat‐resistant N‐phenylmaleimide–styrene–maleic anhydride copolymers and application in acrylonitrile–butadiene–styrene resin

The heat‐resistant copolymer of N‐phenylmaleimide (NPMI)–styrene (St)–maleic anhydride (MAH) was synthesized in xylene at 125°C with di‐tert‐butyl diperoxyterephthalate as an initiator. The characteristics of the copolymer were analyzed by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy (¹H‐NMR and ¹³C‐NMR), gel permeation chromatography, and elemental analysis. The ¹³C‐NMR results show that the copolymer possessed random sequence distribution; this was also supported by the differential scanning calorimetry experiment, in which a single glass‐transition temperature (T_g) of 202.3°C was observed. The thermal stability and degradation mechanism of the copolymer were investigated by thermogravimetric analysis. Using the Kissinger equation and Ozawa equation, we proved a nucleation controlling mechanism with an apparent activation energy of 144 kJ/mol. Blends of acrylonitrile–butadiene–styrene with the NPMI–St–MAH copolymer with various contents were prepared with a twin‐screw extruder processes. The mechanical and thermal properties of the materials, such as the tensile and flexural strength, T_g's, and Vicat softening temperatures, were all enhanced with the addition of the modifier, whereas the melt flow index decreased. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of amphiphilic pluronic (F68)‐1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphoethanolamine copolymers and their micelles as a drug carrier

A new Pluronic (F68)‐1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphoethanolamine (DPPE) (Pluronic (F68)–DPPE) copolymer was synthesized with Pluronic (F68) and DPPE. The chemical structure and physical properties of copolymers were determined by FTIR, ¹H NMR, ¹³C NMR, ³¹P NMR, and TGA. Environmental scanning electron microscopy, fluorescence spectroscopy, and dynamic light scattering method confirmed the formation of copolymeric micelles of Pluronic (F68)‐DPPE. To estimate the feasibility as novel drug carriers, the copolymer micelles were prepared by the phase separation dialysis method. Amphotericin B as a lipophilic model drug was incorporated into copolymeric micelles and the drug release behavior was investigated. It was found that the chemical composition of the micelle was a key factor in controlling micelles size, drug‐loading content, and drug release behavior. As DPPE segment weight ratio increased, the micelle size and drug‐loading content increased, and the drug release rate decreased. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of an amphiphilic hyperbranched poly(amine‐ester)‐co‐D,L‐lactide (HPAE‐co‐PLA) copolymers and their nanoparticles for protein drug delivery

A series of hyperbranched poly(amine‐ester)‐co‐D ,L ‐lactide (HPAE‐co‐PLA) copolymer were synthesized by ring‐opening polymerization of D ,L ‐lactide with Sn(Oct)₂ as catalyst to a fourth generation branched poly(amine‐ester) (HPAE‐OHs4). The chemical structures of copolymers were determined by FTIR, ¹H‐NMR, ¹³C‐NMR, and TGA. Double emulsion (DE) and nanoprecipitation (NP) method were used to fabricate the nanoparticles of these copolymers encapsulating bovine serum albumin (BSA) as a model. DSC thermo‐grams indicated that the nanoparticles with BSA kept stable below 40°C. Different factors which influence on particular size and encapsulation efficiency (EE) were investigated. Their EE to BSA could reach 97.8% at an available condition. In vitro release behavior of NPs showed a continuous release after a burst release. The stability maintenance of BSA in the nanoparticle release in vitro was also measured via circular dichroism and fluorescence spectrometry. The results showed that the copolymer nanoparticles have a promising potential in protein delivery system. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010