Modification of polycarbonate by adding poly(L‐lactide)

In this study, the blend of polycarbonate (PC)/poly(L‐lactide) (PLLA) (70/30) was prepared through the conventional extrusion‐injection‐molding process. The morphology of the blend was characterized using scanning electron microscope. Both differential scanning calorimetry and wide angle X‐ray diffraction were used to investigate the crystallization behavior of PLLA component in the blend. The mechanical and thermal properties of the blend were comparatively investigated, and the hydrolytic degradation ability of the material was also evaluated. The results show that the dispersed‐PLLA particles are in the amorphous state in the PC matrix. Although the blend is immiscible, the rigid PLLA particles exhibit the toughening and reinforcement effects on PC simultaneously. Specifically, the heat‐distortion temperature of the blend is comparable to that of pure PC. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Miscibility,morphology and thermal properties of poly(para‐dioxanone)/poly(D,L‐lactide) blends

BACKGROUND: Poly(para‐dioxanone) (PPDO) is a biodegradable polyester with excellent biodegradability, bioabsorbability, biocompatibility and mechanical flexibility. However, its high cost and relatively fast degradation rate have hindered the development of commercial applications. Blending with other polymers is a simple and convenient way of modifying the properties of aliphatic polyesters. Poly(D ,L ‐lactide) (PDLLA) is another polyester that has been extensively studied for biomedical applications due to its biocompatibility and suitable degradation rate. However, to our knowledge, blends of PPDO/PDLLA have not been reported in the literature. RESULTS: A series of biodegradable polymers were blended by solution co‐precipitation of PPDO and PDLLA in various blend ratios. The miscibility, morphology and thermal properties of the materials were investigated. DSC curves for all blends revealed two discrete glass transition temperatures which matched the values for pure PPDO and PDLLA. SEM images of fracture surfaces displayed evidence of phase separation consistent with the DSC results. The contact angles increased with the addition of PDLLA. CONCLUSION: PPDO/PDLLA blends exhibit two distinct glass transition temperatures that remain nearly constant and correspond to the glass transition temperatures of the homopolymers for all blend compositions, indicating that blends of PPDO and PDLLA are immiscible. Images of the surface obtained using SEM were also suggestive of a two‐phase material. The crystallinity of the PPDO phase in the blends was affected by the PDLLA content. The mechanical properties of the blends changed dramatically with composition. Adding PDLLA makes the blends less hydrophilic than PPDO. Copyright © 2008 Society of Chemical Industry     

Characterization of the mechanical and thermal properties and morphological behavior of biodegradable poly(L‐lactide)/poly(ε‐caprolactone) and poly(L‐lactide)/poly(butylene succinate‐co‐L‐lactate) polymeric blends

Two series of biodegradable polymer blends were prepared from combinations of poly(L ‐lactide) (PLLA) with poly(?‐caprolactone) (PCL) and poly(butylene succinate‐co‐L ‐lactate) (PBSL) in proportions of 100/0, 90/10, 80/20, and 70/30 (based on the weight percentage). Their mechanical properties were investigated and related to their morphologies. The thermal properties, Fourier transform infrared spectroscopy, and melt flow index analysis of the binary blends and virgin polymers were then evaluated. The addition of PCL and PBSL to PLLA reduced the tensile strength and Young's modulus, whereas the elongation at break and melt flow index increased. The stress–strain curve showed that the blending of PLLA with ductile PCL and PBSL improved the toughness and increased the thermal stability of the blended polymers. A morphological analysis of the PLLA and the PLLA blends revealed that all the PLLA/PCL and PLLA/PBSL blends were immiscible with the PCL and PBSL phases finely dispersed in the PLLA‐rich phase. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Mechanical properties and thermal stability of poly(L‐lactide)/calcium carbonate composites

Poly(L ‐lactide) (PLA) was melt‐mixed with micrometer‐sized and nanosized calcium carbonate (CaCO₃) particles before and after modification with calcium stearate. Adhesion between the CaCO₃ particles and the PLA matrix was assessed qualitatively by scanning electron microscopy observation of the fractured surface morphology of the composites. The effect of the incorporation of the CaCO₃ particles on the thermal stability of the PLA‐based composites was quantified by the temperatures corresponding to 5 and 50% of weight loss and the activation energy determined through thermogravimetric analyses of the composites. The tensile strength and modulus values of the composite were improved greatly without a significant loss in the elongation at break when the nanosized CaCO₃ was incorporated up to 30 wt %. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Influence of mesophase–crystal transition on thermal and mechanical properties of stretched poly(L‐lactide)

The mesophase in the as‐stretched poly(L ‐lactide) (PLLA) exhibits low thermal stability and undergoes melting around T_g. As a consequence, without constraints as‐stretched PLLA can recover to its original (unstretched) length while being held above T_g. Upon constrained annealing at 70°C mesophase is transformed into highly oriented crystals, responsible for little free shrinkage and superior dimensional stability. At the same time, molecular orientation in the amorphous phase first decreases significantly due to thermodynamic relaxation, and then increases moderately with the advent of cold crystallization. It correlates well with the change of yield strength with respect to annealing time. POLYM. ENG. SCI., 53:2568–2572, 2013. © 2013 Society of Plastics Engineers     

Effect of gamma‐irradiation on the electret properties of poly(L‐lactide)

Electret stability of poly(L ‐lactide) (PLA) films, gamma‐irradiated up to 100 kGy has been investigated by measuring the surface potential during the storage period. PLA samples—40‐μm thick films—were prepared by the casting method and then irradiated in a ⁶⁰Co radiation facility at a dose rate of 0.25 kGy/h. The structural changes during the irradiation were estimated by viscometric, differential scanning calorimetry and scanning electron microscope measurements. Random chain scission and appearance of end radicals are the most probable results of the irradiation process. After irradiation, the samples were charged in a corona discharge system and surface potential was measured by the method of the vibrating electrode with compensation. The values of the surface potential of the irradiated samples were higher in comparison with the non‐irradiated samples. This effect could be related to the degradation of the macromolecules and changes in the crystal state of PLA during the irradiation. Both of the mentioned factors lead to structural defects that increase the number of discrete trapping levels. The effect of low pressure on the surface potential drop was also investigated. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Accelerated crystallization of poly(L‐lactide) by physical aging

The low‐temperature physical aging of amorphous poly(L ‐lactide) (PLLA) at 25–50°C below glass transition temperature (T_g) was carried out for 90 days. The physical aging significantly increased the T_g and glass transition enthalpy, but did not cause crystallization, regardless of aging temperature. The nonisothermal crystallization of PLLA during heating was accelerated only by physical aging at 50°C. These results indicate that the structure formed by physical aging only at 50°C induced the accelerated crystallization of PLLA during heating, whereas the structure formed by physical aging at 25 and 37°C had a negligible effect on the crystallization of PLLA during heating, except when the physical aging at 37°C was continued for the period as long as 90 days. The mechanism for the accelerated crystallization of PLLA by physical aging is discussed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Degradation of poly(L‐lactide) by a mesophilic bacterium

A Gram negative, rod‐shaped mesophilic bacterium active for poly(L ‐lactide) (PLA) degradation was isolated through the enrichment culture and clear‐zone method. The isolated strain was identified to be Bordetella petrii PLA‐3 on the basis of 16S rDNA gene sequence analysis. B. petrii PLA‐3 was active not only for the degradation of low‐molecular‐weight PLA but also for the degradation of high‐molecular‐weight PLA. The strain seemed to attack the crystalline part of PLA as well as the amorphous region. The PLA film incubated in compost inoculated with the isolated strain lost its weight more notably and exhibited a lower molecular weight than that incubated in the sterilized compost without living microorganisms. Moreover, the profile of the cumulative amount of CO₂ after 20 days of burial in the sterilized compost and subsequent inoculation of the isolated strain into compost was nearly the same as that of CO₂ evolved from PLA buried in compost with the isolated strain at the very beginning when the time was shifted by 20 days. This indicated that not only the abiotic hydrolysis but also the microbial enzymes of the strain contributed to the initial chain cleavage of PLA molecules and resolved the doubt that PLA molecules should be initially cleaved into very low‐molecular‐weight substances by abiotic hydrolysis to be subsequently absorbed into and biodegraded by microorganisms. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Poly(L‐lactide): v. effects of storage in swelling solvents on physical properties and structure of poly(L‐lactide)

The effects of storage at 25°C in swelling solvents having different solubility parameter (δ_s) values of 16.8–26.0 J^0.5 cm^−1.5 on the physical properties and structure of as‐cast poly(L ‐lactide) (PLLA) films was investigated by the degree of swelling (DS), differential scanning calorimetry (DSC), and tensile tests. It was found that PLLA film shows durabity to swelling solvents having δ_s values much lower or higher than the value range of 19–20.5 J^0.5 cm^−1.5 and that the polymer solubility parameter (δ_p) for PLLA is in the value range of 19–20.5 J^0.5 cm^−1.5. The decrease in the glass transition temperature (T_g) and tensile properties and the increase in melting temperature (T_m) and crystallinity (x_c) were larger for PLLA films swollen in solvents having a high DS at 7 days (DS_7days). The slight increase in T_m and x_c for PLLA films after swelling in solvents with high DS_7days values was due to the crystallization of PLLA that occurred during swelling, while the small increase in T_g and elongation at break (ε_B) for PLLA films after immersion in the solvents having low DS_7days values was ascribed to stabilized chain packing in the amorphous region. The T_g, ε_B, and Young's modulus of the PLLA films after swelling in the solvents varied in the ranges of 47–57°C, 4–8%, and 55–77 kg/mm², depending on their DS_7days or δ_s values. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1582–1589, 2001     

Non‐isothermal crystallization kinetics of poly(L‐lactide)

The non‐isothermal crystallization kinetics of poly( L ‐lactide) (PLLA) in comparison with a polylactide stereocopolymer (PLA₉₈) containing 98% L ‐lactyl and 2% D ‐lactyl units were investigated using differential scanning calorimetry to examine the effect of the configurational structure. Avrami, Ozawa and Liu models were applied to describe the crystallization process. The Avrami analysis exhibited two stages in non‐isothermal crystallization, while the Ozawa and Liu models did not successfully describe the crystallization behaviour. The activation energy was calculated with Kissinger's method. The energy barrier was found to be the same for PLLA and PLA₉₈ with a value of 126 kJ mol^?1. Copyright © 2010 Society of Chemical Industry     

Toughening of poly(L‐lactide) by melt blending with rubbers

Poly(L ‐lactide) (PLA) was melt‐blended with four rubber components—ethylene–propylene copolymer, ethylene–acrylic rubber, acrylonitrile–butadiene rubber (NBR), and isoprene rubber (IR)—in an effort to toughen PLA. All the blend samples exhibited distinct phase separation. Amorphous PLA constituted a topologically continuous matrix in which the rubber particles were dispersed. According to Izod impact testing, toughening was achieved only when PLA was blended with NBR, which showed the smallest particle size in its blend samples. In agreement with the morphological analysis, the value of the interfacial tension between the PLA phase and the NBR phase was the lowest, and this suggested that rubber with a high polarity was more suitable for toughening PLA. Under the tensile stress conditions for NBR and IR blend samples, these rubbers displayed no crosslinking and showed a high ability to induce plastic deformation before the break as well as high elongation properties; this suggested that the intrinsic mobility of the rubber was important for the dissipation of the breaking energy. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Morphology and melt crystallization of poly(L‐lactide) obtained by ring opening polymerization of L‐lactide with zinc catalyst

The morphology and melt crystallization of zinc catalyzed poly(L ‐lactide) (PLLA) were investigated by using differential scanning calorimetry (DSC), polarized optical microscopy, and scanning electron microscopy. Isothermal melt crystallization performed at 95–135°C showed that the morphology depends on the degree of supercooling, as illustrated by crystallite perfection and lamellar thickening behaviors. Double melting peak was observed on DSC thermograms and attributed to the melt‐recrystallization mechanism, small and imperfect crystals becoming gradually more stable ones. Circumferential and hexagonal cracks were detected in PLLA spherulites, which were formed during melt‐crystallization at 135°C and quenching in liquid nitrogen. Rhythmic growth and thermal shrinkage are suggested to be the two main factors accounting for the formation of periodic cracks. Spherulite growth rates of PLLA were evaluated by using combined isothermal and nonisothermal procedures, and were analyzed by the secondary nucleation theory. The maximum growth rate reached 9.1 μm/min at 130°C. The temperature range investigated (120–155°C) belongs to the Regime II of crystallization. The value of U* was found to be 1890 cal/mol, instead of 1500 cal/mol commonly used in literature, and K_g and σ were estimated to be 3.03 × 10⁵ K² and 1.537 × 10^?4 J/m², respectively. As a result, no distinct difference between PLLA catalyzed by zinc metal and those prepared with stannous octoate catalyst exists in this work. POLYM. ENG. SCI., 46:1583–1589, 2006. © 2006 Society of Plastics Engineers.     

Photocurable biodegradable polyesters from poly(L‐lactide) diols

α,ω‐Dihydoxy‐terminated poly(L ‐lactide)s (PLLA diols) with various molecular weights (1000, 2000 and 3000 g mol^?1) were prepared by the ring‐opening polymerization of L ‐lactide using 1,6‐hexanediol as an initiator. These were subsequently chain‐extended with the diacyl chloride of 4,4′‐(adipoyldioxy)dicinnamic acid (CAC) to obtain high‐molecular‐weight photocurable polyesters (CAC/PLLAs). The resulting polyesters were characterized by gel permeation chromatography, Fourier‐transform infrared, ultraviolet–visible and proton nuclear magnetic resonance spectroscopies, differential scanning calorimetry and thermogravimetry. These photoreactive polyesters were irradiated with a high‐pressure mercury lamp (λ > 280 nm) for 30–180 min to produce the crosslinked polyesters. The gel fraction yield increased with photocuring time, and exceeded 80 % after 180 min. The photocuring process disturbed the crystallization of the CAC/PLLA films, while it enhanced their thermal stabilities. With increasing photocuring time, both the tensile strength and modulus increased markedly. The best mechanical properties (tensile strength = 41 MPa; tensile modulus = 1550 MPa) were obtained for a CAC/PLLA‐3000 film photocured for 180 min. The tensile modulus of this photocured film was larger than that of pure PLLA. The hydrolytic degradation rates of the CAC/PLLA films in a phosphate buffer solution (pH, 7.2) of proteinaze‐k at 37 °C were much slower than those of pure PLLA films. Copyright © 2004 Society of Chemical Industry     

Investigation of poly(lactide) stereocomplexation between linear poly(L‐lactide) and PDLA‐PEG‐PDLA tri‐block copolymer

In this study, stereocomplexed poly(lactide) (PLA) was investigated by blending linear poly(l ‐lactide) (PLLA) and tri‐block copolymer poly(d ‐lactide) ? (polyethylene glycol) ? poly(d ‐lactide) (PDLA‐PEG‐PDLA). Synthesized PDLA‐PEG‐PDLA tri‐block copolymers with different PEG and PDLA segment lengths were studied and their influences on the degree of sterecomplexation and non‐isothermal crystallization behaviour of the PLLA/PDLA‐PEG‐PDLA blend were examined in detail by DSC, XRD and polarized optical microscopy. A full stereocomplexation between PLLA and PDLA‐PEG_4k‐PDLA200 could be formed when the L/D ratio ranged from 7/3 to 5/5 without the presence of PLA homocrystals. The segmental mobility and length of both PEG and PDLA are the dominating factors in the critical D/L ratio to achieve full stereocomplexation and also for nucleation and spherulite growth during the non‐isothermal crystallization process. For fixed PEG segmental length, the stereocomplexed PLA formed showed first an increasing and then a decreasing melting temperature with increasing PDLA segments due to their intrinsic stiff mobility. Furthermore, the effect of PEG segmental mobility on PLA stereocomplexation was investigated. The results clearly showed that the crystallization temperature and melting temperature of stereocomplexed‐PLA kept increasing with increasing PEG segmental length, which was due to PEG soft mobility in the tri‐block copolymers. However, PEG was not favourable for nucleation but could facilitate the spherulite growth rate. Both the PDLA and PEG segmental lengths in the tri‐block copolymers affect the crystallinity of stereocomplexed‐PLA and the stereocomplexation formation process; they have a different influence on blends prepared by solution casting or the melting method. © 2015 Society of Chemical Industry     

Microstructure and mechanical properties of poly(L‐lactide) scaffolds fabricated by gelatin particle leaching method

Biodegradable poly(L ‐lactide) (PLLA) scaffolds with well‐controlled interconnected irregular pores were fabricated by a porogen leaching technique using gelatin particles as the porogen. The gelatin particles (280–450 μm) were bonded together through a treatment in a saturated water vapor condition at 70°C to form a 3‐dimensional assembly in a mold. PLLA was dissolved in dioxane and was cast onto the gelatin assembly. The mixtures were then freeze‐dried or dried at room temperature, followed by removal of the gelatin particles to yield the porous scaffolds. The microstructure of the scaffolds was characterized by scanning electron microscopy with respect to the pore shape, interpore connectivity, and pore wall morphology. Compression measurements revealed that scaffolds fabricated by freeze‐drying exhibited better mechanical performance than those by room temperature dying. Along with the increase of the polymer concentration, the porosity of the scaffolds decreased whereas the compressive modulus increased. When the scaffolds were in a hydrated state, the compressive modulus decreased dramatically. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1373–1379, 2005     

Biodegradable poly(L‐lactide) and polycaprolactone block copolymer networks

New biodegradable block copolymer networks were synthesized from methacrylate‐terminated poly(L ‐lactide) (mLA) and polycaprolactone (mCL) macromers. This allowed the realization of a series of materials in which the macromer ratio can be used to tailor the physical and mechanical properties of the materials. The synthesis of the macromers was characterized using Fourier transform infrared (FTIR) spectroscopy and ¹H NMR spectroscopy. Poly(mCL) and poly(mLA) networks were prepared by photopolymerization of the macromers, and copolymers were also prepared from the two macromers in various proportions. The phase microstructure of the new systems and the network architecture were investigated using differential scanning calorimetry, FTIR spectroscopy, dynamic mechanical analysis and thermogravimetry studies. Copyright © 2010 Society of Chemical Industry     

Shape memory effect of poly(L‐lactide)‐ based polyurethanes with different hard segments

A series of biodegradable polylactide‐based polyurethanes (PLAUs) were synthesized using PLA diol (M_n = 3200) as soft segment, 4,4′‐diphenylmethane diisocyanate (MDI), 2,4‐toluene diisocyanate (TDI), and isophorone diisocyanate (IPDI) as hard segment, and 1,4‐butanediol as chain extender. The structures and properties of these PLAUs were studied using infrared spectroscopy, differential scanning calorimetry, tensile testing, and thermomechanical analysis. Among them, the MDI‐based PLAU has the highest T_g, maximum tensile strength, and restoration force, the TDI‐based PLAU has the lowest T_g, and the IPDI‐based PLAU has the highest tensile modulus and elongation at break. They are all amorphous. The shape recovery of the three PLAUs is almost complete in a tensile elongation of 150% or a twofold compression. They can keep their temporary shape easily at room temperature (20 °C). More importantly, they can deform and recover at a temperature below their T_g values. Therefore, by selecting the appropriate hard segment and adjusting the ratio of hard to soft segments, they can meet different practical demands for shape memory medical devices. Copyright © 2007 Society of Chemical Industry     

The role of polycarbonate molecular weight in the poly(L‐lactide) blends compatibilized with poly(butylene succinate‐co‐L‐lactate)

Poly(butylene succinate‐co‐L ‐lactate) (PBSL)–compatibilized poly(L ‐lactide) (PLLA) polymer blends with two commercial grades of polycarbonate (PC) were investigated. The capillary tests showed that the steady shear viscosity of high molecular weight PC (PC‐L) was 10 times higher than that of low molecular weight PC (PC‐AD) throughout the shear rate range under investigation. Morphologic examination revealed that the shape of the dispersed PC‐L phase in the as‐extruded blends was largely spherical, but the PC‐AD phase was more like a rod and elongated further during injection molding. Notched Izod impact strength (IS) of the unmodified PLLA/PC‐L blend was higher than that of PC‐AD blend. The IS of modified ternary blends increased with PBSL content because of enhanced phase interaction indicated from thermal and morphologic analysis. The PBSL modification also enhanced IS more significantly in PLLA/PC‐L than in PLLA/PC‐AD blends. On the contrary, the heat deflection temperature (HDT) of PLLA/PC‐L binary system was much lower than that of PLLA/PC‐AD. HDT of PBSL‐modified PLLA/PC‐AD blends dropped with increasing PBSL content, which is a ductile polymer. Thermal and dynamic mechanical analysis of the ternary blends showed that individual components were immiscible with distinct T_gs for PC and PLLA and distinct T_ms for PBSL and PLLA. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Influence of the synthesis conditions on the structural and thermal properties of poly(l‐lactide)‐b‐poly(ethylene glycol)‐b‐poly(l‐lactide)

The poly(l ‐lactide)‐b‐poly(ethylene glycol)‐b‐poly(l ‐lactide) block copolymers (PLLA‐b‐PEG‐b‐PLLA) were synthesized in a toluene solution by the ring‐opening polymerization of 3,6‐dimethyl‐1,4‐dioxan‐2,5‐dione (LLA) with PEG as a macroinitiator or by transterification from the homopolymers [polylactide and PEG]. Two polymerization conditions were adopted: method A, which used an equimolar catalyst/initiator molar ratio (1–5 wt %), and method B, which used a catalyst content commonly reported in the literature (<0.05 wt %). Method A was more efficient in producing copolymers with a higher yield and monomer conversion, whereas method B resulted in a mixture of the copolymer and homopolymers. The copolymers achieved high molar masses and even presenting similar global compositions, the molar mass distribution and thermal properties depends on the polymerization method. For instance, the suppression of the PEG block crystallization was more noticeable for copolymer A. An experimental design was used to qualify the influence of the catalyst and homopolymer amounts on the transreactions. The catalyst concentration was shown to be the most important factor. Therefore, the effectiveness of method A to produce copolymers was partly due to the transreactions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40419.     

Thermal and mechanical properties of plasticized poly(L‐lactide) nanocomposites with organo‐modified montmorillonites

Nanocomposites of poly(lactide) (PLA) and the PLA plasticized with diglycerine tetraacetate (PL‐710) and ethylene glycol oligomer containing organo‐modified montmorillonites (ODA‐M and PGS‐M) by the protonated ammonium cations of octadecylamine and poly(ethylene glycol) stearylamine were prepared by melt intercalation method. In the X‐ray diffraction analysis, the PLA/ODA‐M and plasticized PLA/ODA‐M composites showed a clear enlargement of the difference of interlayer spacing between the composite and clay itself, indicating the formation of intercalated nanocomposite. However, a little enlargement of the interlayer spacing was observed for the PLA/PGS‐M and plasticized PLA/PGS‐M composites. From morphological studies using transmission electron microscopy, a finer dispersion of clay was observed for PLA/ODA‐M composite than PLA/PGS‐M composite and all the composites using the plasticized PLA. The PLA and PLA/PL‐710 composites containing ODA‐M showed a higher tensile strength and modulus than the corresponding composites with PGS‐M. The PLA/PL‐710 (10 wt %) composite containing ODA‐M showed considerably higher elongation at break than the pristine plasticized PLA, and had a comparable tensile modulus to pure PLA. The glass transition temperature (T_g) of the composites decreased with increasing plasticizer. The addition of the clays did not cause a significant increase of T_g. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006