Effect of poly(styrene‐co‐maleic anhydride) imidization on the miscibility and phase‐separation temperatures of poly(styrene‐co‐maleic anhydride)/poly(vinyl methyl ether) and poly(styrene‐co‐maleic anhydride)/ poly(methyl methacrylate) blends

The objective of this work was to study the miscibility and phase‐separation temperatures of poly(styrene‐co‐maleic anhydride) (SMA)/poly(vinyl methyl ether) (PVME) and SMA/poly(methyl methacrylate) (PMMA) blends with differential scanning calorimetry and small‐angle light scattering techniques. We focused on the effect of SMA partial imidization with aniline on the miscibility and phase‐separation temperatures of these blends. The SMA imidization reaction led to a partially imidized styrene N‐phenyl succinimide copolymer (SMI) with a degree of conversion of 49% and a decomposition temperature higher than that of SMA by about 20°C. We observed that both SMI/PVME and SMI/PMMA blends had lower critical solution temperature behavior. The imidization of SMA increased the phase‐separation temperature of the SMA/PVME blend and decreased that of the SMA/PMMA blend. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Nonlinear phase‐separation behavior of poly(methyl methacrylate)/poly(styrene‐co‐maleic anhydride) blends

The nonlinear phase‐separation behavior of poly(methyl methacrylate)/poly(styrene‐co‐maleic anhydride) (PMMA/SMA) blends over wide appropriate temperature and heating rate ranges was studied using time‐resolved small‐angle laser light scattering. During the non‐isothermal process, a quantitative logarithm function was established to describe the relationship between cloud point (T_c) and heating rate (k) as given by T_c = Alnk + T₀, in which the parameter A, reflecting the heating rate dependence, is much different for different compositions due to phase‐separation rate and activation energy difference. For the isothermal phase‐separation process, an Arrhenius‐like equation was successfully applied to describe the temperature dependence of the apparent diffusion coefficient (D_app) and the relaxation time (τ) of the early stage as well as the late stage of spinodal decomposition (SD) of PMMA/SMA blends. Based on the successful application of the Arrhenius‐like equation, the related activation energies could be obtained from D_app and τ of the early and late stages of SD, respectively. In addition, these results indicate that it is possible to predict the temperature dependence of the phase‐separation behavior of binary polymer mixtures during isothermal annealing over a range of 100 °C above the glass transition temperature using the Arrhenius‐like equation. © 2012 Society of Chemical Industry     

Ionomeric blends of poly(ethylene oxide) with poly(styrene‐co‐maleic anhydride) ionomer: Miscibility,crystallization, and melting behavior

The miscibility and crystallization behavior of poly(ethylene oxide) (PEO) and poly(styrene‐co‐maleic anhydride) ionomer (SMAI) blends were studied by the dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC). This study has demonstrated that the presence of ion–dipole interactions enhances the miscibility of otherwise immiscible polymers in the PEO and high molecular weight poly(styrene‐co‐maleic anhydride) (SMA). The effect of ion–dipole interactions on enhancing miscibility is confirmed by the presence of a single glass transition temperature (T_g) and a depression of the equilibrium melting temperature of the PEO component. The equilibrium melting temperature of PEO in the blends are obtained using Hoffman‐Weeks plots. The interaction energy density, β, is calculated from these data using the Nishi‐Wang equation. The results suggest that PEO and SMAI blends are thermodynamically miscible in the melt. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1–7, 2000     

Miscibility and crystallization kinetics of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/ poly(methyl methacrylate) blends

The miscibility and crystallization kinetics of the blends of random poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [P(HB‐co‐HV)] copolymer and poly(methyl methacrylate) (PMMA) were investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). It was found that P(HB‐co‐HV)/PMMA blends were miscible in the melt. Thus the single glass‐transition temperature (T_g) of the blends within the whole composition range suggests that P(HB‐co‐HV) and PMMA were totally miscible for the miscible blends. The equilibrium melting point (T°_m) of P(HB‐co‐HV) in the P(HB‐co‐HV)/PMMA blends decreased with increasing PMMA. The T°_m depression supports the miscibility of the blends. With respect to the results of crystallization kinetics, it was found that both the spherulitic growth rate and the overall crystallization rate decreased with the addition of PMMA. The kinetics retardation was attributed to the decrease in P(HB‐co‐HV) molecular mobility and dilution of P(HB‐co‐HV) concentration resulting from the addition of PMMA, which has a higher T_g. According to secondary nucleation theory, the kinetics of spherulitic crystallization of P(HB‐co‐HV) in the blends was analyzed in the studied temperature range. The crystallizations of P(HB‐co‐HV) in P(HB‐co‐HV)/PMMA blends were assigned to n = 4, regime III growth process. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3595–3603, 2004     

Polymer blends of stereoregular poly(methyl methacrylate) and poly(styrene‐co‐p‐hydroxystyrene)

Isotactic, atactic, and syndiotactic poly(methyl methacrylates) (PMMAs) (designated as iPMMA, aPMMA, and sPMMA) were mixed with poly(styrene‐co‐p‐hydroxystyrene) (abbreviated as PHS) containing 15 mol % of hydroxystyrene separately in 2‐butanone to make three polymer blend systems. Differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy were used to study the miscibility of these blends. The three polymer blends were found to be miscible, because all the prepared films were transparent and there was a single glass transition temperature (T_g) for each composition of the polymers. T_g elevation (above the additivity rule) is observed in all the three PMMA/PHS blends mainly because of hydrogen bonding. If less effective hydrogen bonding based on the FTIR evidence is assumed to infer less exothermic mixing, sPMMA may not be miscible with PHS over a broader range of conditions as iPMMA and aPMMA. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 431–440, 1999     

Synthesis of styrene–maleic anhydride random copolymer and its compatibilization to poly(2,6‐dimethyl‐1,4‐phenylene ether)/brominated epoxy resin

Styrene–maleic anhydride random copolymer (R‐SMA_7.5), with a low content of maleic anhydride (MAH) of about 7.5 mol%, has been prepared, and the copolymer was characterized by fourier‐transform infrared (FTIR) and ¹³C NMR techniques showing that the product contained only random copolymer without blocks. The miscibility between poly(2,6‐dimethyl‐1,4‐phenylene ether) (PPE) and R‐SMA, was investigated by differential scanning calorimetry (DSC), showing that PPE was miscible with R‐SMA synthesized in our laboratory over the entire composition with low MAH content. A blend of R‐SMA₁₈ (MAH content is about 18 mol%) and PPE was also studied by DSC, which showed that PPE was immiscible when R‐SMA was the major component, although it was miscible with limited composition. FTIR investigation showed that R‐SMA could react with bromide epoxy (BEP) resin at high temperature (180°). The heat‐resistance and mechanical properties of R‐SMA/PPE/BEP systems were tested and analyzed, and results indicated that R‐SMA could improve the miscibility of PPE and BEP with increasing T_g of the BEP phase and decreasing the T_g of the PPE slightly, improving the breaking elongation and breaking energy, which resulted from good miscibility between PPE and BEP with R‐SMA as the compatibilizer. Finally, the properties of the composites (copper clad laminate) with R‐SMA_7.5 are studied and discussed. Copyright © 2003 Society of Chemical Industry     

Blends of bacterial poly[(R)‐3‐hydroxybutyrate] with oligo[(R,S)‐3‐hydroxybutyrate]‐diol

The miscibility, melting and crystallization behaviour of poly[(R)‐3‐hydroxybutyrate], PHB, and oligo[(R,S)‐3‐hydroxybutyrate]‐diol, oligo‐HB, blends have been investigated by differential scanning calorimetry: thermograms of blends containing up to 60 wt% oligo‐HB showed behaviour characteristic of single‐phase amorphous glasses with a composition dependent glass transition, T_g, and a depression in the equilibrium melting temperature of PHB. The negative value of the interaction parameter, determined from the equilibrium melting depression, confirms miscibility between blend components. In parallel studies, glass transition relaxations of different melt‐crystallized polymer blends containing 0–20 wt% oligo‐HB were dielectrically investigated between ?70 °C and 120 °C in the 100 Hz to 50 kHz range. The results revealed the existence of a single α‐relaxation process for blends, indicating the miscibility between amorphous fractions of PHB and oligo‐HB. © 2002 Society of Chemical Industry     

The study of poly(styrene‐co‐p‐(hexafluoro‐2‐hydroxylisopropyl)‐α‐methylstyrene)/poly(ethylene oxide) blends

Different hydroxyl content poly(styrene‐co‐p‐(hexafluoro‐2‐hydroxylisopropyl)‐α‐methylstyene) [PS(OH)‐X] copolymers were synthesized and blends with 2,2,6,6‐tetramrthyl‐piperdine‐1‐oxyl end spin‐labeled PEO [SLPEO] were prepared. The miscibility behavior of all the blends was predicted by comparing the critical miscible polymer–polymer interaction parameter (χ_crit) with the polymer–polymer interaction parameter (χ). The micro heterogeneity, chain motion, and hydrogen bonding interaction of the blends were investigated by the ESR spin label method. Two spectral components with different rates of motion were observed in the ESR composite spectra of all the blends, indicating the existence of microheterogeneity at the molecular level. According to the variations of ESR spectral parameters T_a, T_d, ΔT, T_50G and τ_c, with the increasing hydroxyl content in blends, it was shown that the extent of miscibility was progressively enhanced due to the controllable hydrogen bonding interaction between the hydroxyl in PS(OH) and the ether oxygen in PEO. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2312–2317, 2004     

Effects of molecular entanglement on molecular dynamics and phase-separation kinetics of poly(methyl methacrylate)/poly(styrene-co-maleic anhydride) blends

Poly(methyl methacrylate)/poly(styrene-co-maleic anhydride) (PMMA/SMA) blends with various compositions were prepared through solution casting and melt blending. Two preparation routes, solution casting and melt blending, were used to achieve different degrees of molecular entanglement in the samples with solution casting giving rise to a lower degree of entanglement. Therefore, the effect of molecular entanglement on molecular dynamics and phase-separation kinetics of PMMA/SMA blends was investigated by using broadband dielectric spectroscopy and small-angle laser light scattering (SALLS). Molecular entanglement is found to have a pronounced effect on the α-relaxation process. The glass transition temperature (T_g) is related to the degree of entanglement and a higher degree of entanglement can result in a higher T_g which shifts to a higher temperature after annealing. The relaxation time (τ) of the α-relaxation process is lower for lower degrees of entanglement. Neither the dynamics nor the distribution width of the β-relaxation process is affected by degree of entanglement, regardless of the blend composition. The kinetics of phase-separation by spinodal decomposition (SD) in PMMA/SMA blends are however significantly influenced by the degrees of entanglement with decomposition rate being higher at lower degrees of entanglement.     

Compatibility and thermal properties of poly(acrylonitrile–butadiene–styrene) copolymer blends with poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile)

The mechanical and heat‐resistant properties of acrylonitrile–butadiene–styrene (ABS) binary and ternary blends were investigated. The relationship of compatibility and properties was discussed. The results show that poly(methyl methacrylate) (PMMA) and styrene–maleic anhydride (SMA) can improve the thermal properties of conventional ABS. The Izod impact property of ABS/PMMA blends increases significantly with the addition of PMMA, whereas that of ABS/SMA blends decreases significantly with the addition of SMA. Blends mixed with high‐viscosity PMMA are characterized by higher heat‐distortion temperature (HDT), and their heat resistance is similar to that of blends mixed with SMA. For high‐viscosity PMMA, from 10 to 20%, it is clear that blends appear at the brittle–ductile transition, which is related to the compatibility of the two phases. TEM micrographs show low‐content and high‐viscosity PMMA in large, abnormally shaped forms in the matrix. Compatibility between PMMA and ABS is dependent on both the amount and the viscosity of PMMA. When the amount of high‐viscosity PMMA varied from 10 to 20 wt %, the morphology of the ABS binary blends varied from poor to satisfactory compatibility. As the viscosity of PMMA decreases, the critical amount of PMMA needed for the compatibility of the two phases also decreases. SMA, as a compatibilizer, improved the interfacial adhesiveness of ABS and PMMA, which results in PMMA having good dispersion in the matrix. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2652–2660, 2002     

Effect of tacticity of poly(methyl methacrylate) on the miscibility with poly(styrene‐co‐acrylonitrile)

Isotactic, atactic, and syndiotactic poly(methyl methacrylates) (PMMAs) (designated as iPMMA, aPMMA, and sPMMA) with approximately the same molecular weight were mixed separately with poly(styrene‐co‐acrylonitrile) (abbreviated as PSAN) containing 25 wt % of acrylonitrile in tetrahydrofuran to make three polymer blend systems. Differential scanning calorimetry (DSC) was used to study the miscibility of these blends. The results showed that the tacticity of PMMA has a definite impact on its miscibility with PSAN. The aPMMA/PSAN and sPMMA/PSAN blends were found to be miscible because all the prepared films were transparent and showed composition dependent glass transition temperatures (T_gs). The glass transition temperatures of the two miscible blends were fitted well by the Fox equation, and no broadening of the glass transition regions was observed. The iPMMA/PSAN blends were found to be immiscible, because most of the cast films were translucent and had two glass transition temperatures. Through the use of a simple binary interaction model, the following comments can be drawn. The isotactic MMA segments seemed to interact differently with styrene and with acrylonitrile segments from atactic or syndiotactic MMA segments. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2894–2899, 1999     

Liquid crystallization of poly(styrene‐co‐maleic anhydride) induced by intermolecular hydrogen bonds

The liquid crystallization of general polymer (GP) with maleic anhydride in the main chain has been realized through molecular recognition and self‐assembly based on intermolecular hydrogen bonds. Poly[styrene‐co‐(N‐4‐carboxylphenyl)maleimide] (SMIBA) was synthesized by imidization and dehydration of Poly(styrene‐co‐maleic anhydride) (SMA) with p‐aminobenzoic acid (ABA) for use as an H‐bonded donor polymer. 4‐Methoxy‐4′‐stilbazole (MSZ) and 4‐nitro‐4′‐stilbazole (SZNO₂) were prepared as an H‐bonded acceptor. SMIBA was complexed with MSZ or SZNO₂ by slow evaporation from pyridine solution to form a self‐assembly, which exhibits the mesophase, while neither of the individual components is mesogenic. The phase diagrams of a variety of mixtures between of SMIBA and stilbazoles have been established using DSC and POM. They show complete miscibility and high thermal stability of the liquid crystalline phase over the whole composition range. The tuning of liquid crystalline properties was achieved by changing the composition of the mixture and involving it with a mixture of SZNO₂ and MSZ. IR measurements strongly support the existence of an H‐bonded complex between the carboxylic acid of SMIBA and the pyridine group of stibazoles. Unlike conventional side‐chain liquid crystalline polymer (SLCP), supramolecular SLCP with a lower molecular weigh polymeric donor has higher thermal stability of the liquid crystalline phase due to the microphase separated in the hydrogen bonding case. Liquid crystallization of GP, such as SMA, induced by hydrogen bonds, offers a new route to prepare functional material with controlled molecular architecture from readily accessible and simpler precursors. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 97–105, 1999     

Miscibility of poly(caprolactone)/chlorinated polypropylene and poly(caprolactone)/poly(chlorostyrene) blends

Poly(caprolactone) (PCL) was blended with poly(chlorostyrene) (PSCI) and chlorinated polypropylene (PPCl). A single glass transition temperature T_g was found for these mixtures, indicating their miscibility. PCL crystallizes in these blends when the chlorinated polymer content is not too high. Otherwise, T_g becomes higher than the melting point of PCL and the high viscosity of the medium hinders the crystallization. The miscibility of PCL/PPCI blends cannot be due to hydrogen bonding between the α-hydrogens of the chlorinated polymer and the carbonyl group of the polyester since PPCI does not have available a large number of α-hydrogens. It is suggested that a dipoledipole ? C?O…Cl? C? interaction is responsible for the observed miscibility phenomenon and that this interaction is probably also responsible for the miscibility between all other polyesterchlorinated polymer mixtures. Finally, it was observed that poly(α-methyl-α-n-propyl-β-propiolactone), poly(α-methyl-α-ethyl-β-propiolactone) and poly(valerolactone) are not miscible with PSCI or PPCl, despite the fact that they are miscible with poly(vinyl chloride).     

Structure–property behavior of gamma‐irradiated poly(styrene) and poly(methyl methacrylate) miscible blends

Polymer blends based on various ratios of polystyrene (PS) and polymethyl methacrylate (PMMA) were exposed to different doses of gamma radiation up to 25 Mrad. The structure–property behavior of the polymer blends before and after they had been irradiated was investigated by DSC, TGA, and FTIR spectroscopy. The DSC scans of the glass transition temperature (T_g) of the different polymer blends showed that the T_g was greatly decreased by increasing the ratio of the PMMA component in the polymer blends. Moreover, the T_g of PS/PMMA blends was found to decrease with increasing irradiation dose. The depression in T_g was noticeable in the case of blends rich in PMMA component. The TGA thermograms showed that the thermal stability of the unirradiated polymer blends decreases with increasing the ratios of PMMA component. Also, it was found that the presence of PS polymer in the blends affords protection against gamma radiation degradation and improves their thermal stability. However, exposing the polymer blends to high doses of gamma radiation caused oxidative degradation to PMMA components and decreased the thermal stability. The investigation of the kinetic parameters of the thermal decomposition reaction confirm the results of thermal stability. The FTIR analysis of the gamma‐irradiated polymer blend films gives further support to the TGA data. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 509–520, 1999     

Viscoelastic properties of blends of poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile) having various acrylonitrile contents

Dynamic viscoelastic properties of blends of poly(methyl methacrylate) (PMMA) and poly(styrene‐co‐acrylonitrile) (SAN) with various AN contents were measured to evaluate the influence of SAN composition, consequently χ parameter, upon the melt rheology. PMMA/SAN blends were miscible and exhibited a terminal flow region characterized by Newtonian flow, when the acrylonitrile (AN) content of SAN ranges from 10 to 27 wt %. Whereas, PMMA/SAN blends were immiscible and exhibited a long time relaxation, when the AN content in SAN is less than several wt % or greater than 30 wt %. Correspondingly, melt rheology of the blends was characterized by the plots of storage modulus G′ against loss modulus G″. Log G′ versus log G″ plots exhibited a straight line of slope 2 for the miscible blends, but did not show a straight line for the immiscible blends because of their long time relaxation mechanism. The plateau modulus, determined as the storage modulus G′ in the plateau zone at the frequency where tan δ is at maximum, varied linearly with the AN content of SAN irrespective of blend miscibility. This result indicates that the additivity rule holds well for the entanglement molecular weights in miscible PMMA/SAN blends. However, the entanglement molecular weights in immiscible blends should have “apparent” values, because the above method to determine the plateau modulus is not applicable for the immiscible blends. Effect of χ parameter on the plateau modulus of the miscible blends could not be found. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

High heat resistant blends of poly(methyl methacrylate) and styrenic copolymers via post reactor modification

This work focuses on the methodology to obtain high heat resistant grades of poly(methyl methacrylate) (PMMA) without affecting any of the enabling properties of PMMA through the post reactor modification approach. The post reactor modification approach has been employed to obtain high heat resistant grades of PMMA through blending of PMMA with the high heat copolymers namely, styrene maleic anhydride copolymers (SMA) which have a higher glass transition temperature (T_g) than that of PMMA. The optimum levels of maleic anhydride content (MA %) in the SMA and the preferred composition range of PMMA and SMA blends have been identified wherein the heat properties of PMMA improve substantially without affecting the key properties of PMMA such as optical clarity, mechanical, flow, scratch, and weatherability. There are various analytical tools that are being employed to characterize the resulting blends of PMMA and SMA to gain deeper understanding from the fundamental behavior of these blends for the key applications of interest. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46220.     

Thermal decomposition behavior of γ‐irradiated poly(vinyl acetate)/poly(methyl methacrylate) miscible blends

Miscible polymer blends based on various ratios of poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) were prepared in film form by the solution casting technique using benzene as a common solvent. The thermal decomposition behavior of these blends and their individual homopolymers before and after γ‐irradiation at various doses (50–250 kGy) was investigated. The thermogravimetric analysis technique was utilized to determine the temperatures at which the maximum value of the rate of reaction (T_max) occurs and the kinetic parameters of the thermal decomposition. The rate of reaction curves of the individual homopolymers or their blends before or after γ‐ irradiation displayed similar trends in which the T_max corresponding to all polymers was found to exist in the same position but with different values. These findings and the visual observations of the blend solutions and the transparency of the films gave support to the complete miscibility of these blends. Three transitions were observed along the reaction rate versus temperature curves; the first was around 100–200°C with no defined T_max, which may arise from the evaporation of the solvent. The second T_max was in the 340–380°C range, which depended on the polymer blend and the γ‐irradiation condition. A third transition was seen in the rate of reaction curves only for pure PVAc and its blends with PMMA with ratios up to 50%, regardless of γ‐ irradiation. We concluded that γ‐irradiation improved the thermal stability of PVAc/PMMA blends, even though the PMMA polymer was degradable by γ irradiation. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1773–1780, 2006     

Miscibility enhancement on the poly(vinylchloride)/poly(methylmethacrylate) blend and characterization by inverse gas chromatography: The corrected polymer–polymer interaction parameters from the probes dependency

The miscibility of poly(vinyl chloride)/poly(methylmethacrylate) (PVC/PMMA) system was improved by introducing some pyrrolidone units into the main chains of PMMA. For that purpose, we have synthesized two copolymers of poly(methylmethacrylate‐co‐vinylpyrrolidone) (MMVP) through a radical polymerization and carried out a comparative study of PVC/MMVP blends by inverse gas chromatography (IGC) and differential scanning calorimetry (DSC) methods. The adequacy of seven n‐alkane probes has been tested to determine the thermodynamic parameters. The miscibility of the two systems has been proved by a single T_g for each blend. This observation was also confirmed by DSC analysis. To highlight the presence of interaction and its intensity between PVC and MMVP in the blends, the polymer–polymer interaction parameters have been evaluated by IGC trough which the influence of the solute has been resolved. The Schneider approach confirmed the miscibility of these systems as the K deviates positively from unity. The miscibility has been appeared highlighted from the positive difference in surface energy between the pure polymers and their blends. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Study of the solvent effect on miscibility between poly(vinyl chloride) and poly(methyl methacrylate) in the solution state – viscometric measurements

In this work, the solvent effect on the miscibility between poly(vinyl chloride) (PVC) and poly(methyl methacrylate) (PMMA) in ternary polymer solutions was examined by the viscometric method. In these systems, we could understand that the used solvents, tetrahydrofuran (THF) or N,N‐dimethylformamide (DMF), mainly affect the interaction between PVC and PMMA, while prompting various miscible properties. In PVC/PMMA/THF solution, THF is a near θ‐solvent and a poor solvent for PVC and PMMA, respectively. The mixing of the tighter PMMA coils and more extended PVC coils in THF may cause the sea–island heterogeneous structure below the weight fraction of PMMA in the polymer mixture w_PMMA = 0.7, resulting in immiscible PVC/PMMA mixtures. At w_PMMA ≥ 0.7, the PVC/PMMA mixtures are relatively miscible, giving homogeneous polymer solutions. It means that the miscibility between PVC and PMMA depends on the composition of polymer mixture. However, due to the similar affinity of DMF to PVC and PMMA, PVC/PMMA/DMF solutions exhibit high miscibility between PVC and PMMA at about w_PMMA = 0.5. © 2000 Society of Chemical Industry     

Effect of in situ polymerization conditions of methyl methacrylate on the structural and morphological properties of poly(methyl methacrylate)/poly(acrylonitrile‐g‐(ethylene‐co‐propylene‐co‐diene)‐g‐styrene) PMMA/AES Blends

In this study, the structural and morphological properties of poly(methyl methacrylate)/poly(acrylonitrile‐g‐(ethylene‐co‐propylene‐co‐diene‐g‐styrene) (PMMA‐AES) blends were investigated with emphasis on the influence of the in situ polymerization conditions of methyl methacrylate. PMMA‐AES blends were obtained by in situ polymerization, varying the solvent (chloroform or toluene) and polymerization conditions: method A—no stirring and air atmosphere; method B—stirring and N₂ atmosphere. The blends were characterized by infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and dynamic mechanical analysis (DMA). The results showed that the PMMA‐AES blends are immiscible and present complex morphologies. This morphology shows an elastomeric dispersed phase in a glassy matrix, with inclusion of the matrix in the elastomer domains, suggesting core shell or salami morphology. The occlusion of the glassy phase within the elastomeric domains can be due to the formation of graft copolymer and/or phase inversion during polymerization. However, this morphology is affected by the polymerization conditions (stirring and air or N₂ atmosphere) and by the solvent used. The selective extraction of the blends' components and infrared spectroscopy showed that crosslinked and/or grafting reactions occur on the elastomer chains during MMA polymerization. The glass transition of the elastomer phase is influenced by morphology, crosslinking, and grafting degree and, therefore, T_g depends on the polymerization conditions. On the other hand, the behavior of T_g of the glassy phase with blend composition suggests miscibility or partial miscibility for the SAN phase of AES and PMMA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012