Solid and thermal properties of ABA‐type triblock copolymers designed using difunctional fluorine‐containing polyimide macroinitiators with methyl methacrylate

BACKGROUND: ABA‐type poly(methyl methacrylate) (PMMA) and fluorine‐containing polyimide triblock copolymers are potentially beneficial for electric materials. In the work reported here, triblock copolymers with various block lengths were prepared from fluorine‐containing difunctional polyimide macroinitiators and methyl methacrylate monomer through atom‐transfer radical polymerization. The effects of structure on their solid and thermal properties were studied. RESULTS: The weight ratios of the triblock copolymers derived using thermogravimetric analysis were shown to be almost identical to the ratios determined using ¹H NMR. The solid properties (film density and maximum d‐spacing value) and thermal properties (glass transition and thermal expansion) were shown to be strongly dependent on the weight ratios of both PMMA and polyimide components. Furthermore, a porous film, which showed a lower dielectric constant of 2.48 at 1 MHz, could be prepared by heating a triblock copolymer film to induce the thermal degradation of the PMMA component. CONCLUSION: The use of the polyimide macroinitiator was useful in the preparation of ABA‐type triblock copolymers to control each block length that influences the solid and thermal properties. Additionally, the triblock copolymers have great potential in preparing porous polyimides in the application of electric materials as interlayer insulation membranes of large‐scale integration. Copyright © 2009 Society of Chemical Industry     

Radiation‐induced graft copolymerization of α‐methyl styrene and butyl acrylate mixture into polyetheretherketone films

Radiation‐induced graft copolymerization of α‐methyl styrene (AMS), butyl acrylate (BA) monomers, and their mixture was investigated on poly(etheretherketone) films. The graft polymerization was carried out using ethyl methyl ketone as the medium for the copolymerization and the maximum degree of grafting of 27% was achieved. It was observed that the grafting is significantly influenced by the reaction conditions, such as reaction time, preirrradiation dose, monomer concentration, monomer ratio, and the reaction temperature. The degree of grafting increases as the monomer concentration increases up to 30%, beyond which a decrease in the grafting was observed. The degree of grafting showed a maximum at 40% BA content in the monomer mixture. The temperature dependence of the grafting process shows decreasing grafting with the increase in the reaction temperature. The presence of AMS and BA grafts in the film was confirmed by FTIR spectra. The relative change in the PBA/PAMS fraction with respect to the reaction temperature has been found in this study. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

A novel polymer chain growing mode and styrene copolymer prepared with low molecular weight copolymer of α‐methylstyrene and styrene as macroinitiator

A new polymer chain growth mode, having multiple potential chain propagation sites, initiated by oligomer of α‐methylstyrene (AMS) and styrene (St) (PAS) is presented in this article. The effects of PAS content, AMS fraction in PAS and reaction temperature on bulk polymerization of St have been investigated. It is demonstrated that the PAS performed as macroinitiator in the polymerization of St. The average molecular weights of products increase significantly with the evolution of the polymerization, which is different from conventional free radical polymerization. With 20 wt % macroinitiator, the molecular weights increase from 1.21 × 10⁵ to 3.00 × 10⁵ with the monomer conversion increasing from 15.3 to 83.0%. This unique feature is tentatively attributed to both the reversible polymerization–depolymerization of AMS segments at high temperature which could generate more than one propagation sites in a polymer chain and the combination termination of St free radical polymerization. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41460.     

Synthesis and characterization of propylene‐α‐olefin random copolymers with isotactic propylene sequence. II. Propylene–hexene‐1 random copolymers

A series of novel hexene‐1–propylene random copolymers with isotactic sequence of propylene was synthesized with a MgCl₂‐supported Cr(acac)₃ catalyst. The molecular weight distribution of copolymers and homopolymers was considerably narrower than that of typical polyolefins produced by heterogeneous Ziegler–Natta catalysts. The crystallizability of the copolymers having a propylene‐unit content of more than 50 mol % drastically decreased with decreasing propylene‐unit content, and the copolymers with a propylene content of less than 50 mol % were completely amorphous. In the present novel type of random copolymers with crystallizable and noncrystallizable units, a single glass transition was observed between pure polypropylene and polyhexene‐1, and a major component was found to govern the final morphology and the mechanical characteristics. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2949–2954, 2004     

Polymerization of cyclic monomers. VII. Synthesis and radical polymerization of 1,3‐bis[(1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzenes

1,3‐Bis[(1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzenes 1 [RO: CH₃O (a), C₂H₅O (b)] were synthesized by the esterification of the corresponding 1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐carboxylic acids with resorcinol. The structure of the new vinylcyclopropanes was confirmed by elemental analysis and infrared (IR), ¹H nuclear magnetic resonance (¹H‐NMR), and ¹³C nuclear magnetic resonance (¹³C‐NMR) spectroscopy. The radical polymerization of difunctional 2‐vinyl‐cyclopropanes in bulk with 2,2′‐azoisobutyronitrile (AIBN) results in hard, transparent, crosslinked polymers. During the bulk polymerization of the crystalline bis[(1‐methoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzene 1a, an expansion in volume of about 1% took place. The radical solution polymerization of 1a resulted in a soluble polymer with pendant 2‐vinylcyclopropane groups. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1775–1782, 1999     

New monomers and polymers derived from α‐hydroxymethyl methyl vinyl ketone

2‐Hydroxymethyl‐but‐1‐ene‐3‐one [α‐hydroxymethyl methyl vinyl ketone (HMVK)] was synthesized from methyl vinyl ketone using paraformaldehyde and a tertiary amine catalyst. Free‐radical polymerization of this monomer created transparent, tough polymers that were insoluble in organic solvents. HMVK was converted to trimethylsilyl, acetate, and chloride derivatives. When the hydroxyl group was thus protected or removed, all these monomers could be free radically polymerized in bulk to make soluble polymers. The chlorination reaction is complicated by the formation of 1,1‐bischloromethylacetone, which dehydrohalogenated unexpectedly to the desired α‐chloromethyl methyl vinyl ketone. HMVK will self‐condense to an ether dimer in the presence of a catalytic acid. This reagent is capable of crosslinking many alkene monomers through hydrolytically stable ether bonds. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 509–516, 2000     

Synthesis and monomer reactivity ratios of ethyl α‐acetoxyacrylate and acrylic acid copolymers

The synthesis of ethyl α‐acetoxyacrylate (EAA) and the study of its radical polymerization is described. We report the monomer reactivity ratios for copolymers of EAA and acrylic acid (AA) using three different methods: the Jaacks, the Macret and the Fineman–Ross methods. Copolymers were obtained by free radical polymerization initiated by 2,2′‐azobisisobutyronitrile in acetonitrile solutions and were analyzed by NMR and HPLC. The HPLC analysis was used to determine the molar fractions of EAA and AA in the copolymers. The reactivity ratios were estimated to be close to 1 for each monomer. Thus, copolymers of poly(acrylic acid) bearing some biodegradable units of EAA in the chain were subsequently prepared. The study of the hydrolysis of these units shows that only basic conditions were efficient to lead to hydrolyzed monomer units. Copyright © 2005 Society of Chemical Industry     

Random copolymers based on trimethylene carbonate and ε‐caprolactone for implant applications: Synthesis and properties

Random copolymers of trimethylene carbonate (TMC) and ε‐caprolactone (CL) have been synthesized by ring‐opening polymerization of TMC and CL in the presence of stannous octoate. The effects of feeding dose, reaction temperature and polymerization time, and effect of catalyst content on the copolymerization were investigated. The results showed that the composition of the copolymers was in good agreement with the feeding dose, and the molecular weight of the copolymers decreased firstly with increasing CL content and then increased. The decrease in the reaction temperature, polymerization time and catalyst content would increase the molecular weight of the copolymers. Furthermore, the feeding dose affected the thermal and mechanical properties of the copolymer largely, and the possessing different properties of random copolymers could be obtained by adjusting the copolymer compositions. This work could optimize the polymerization conditions to achieve the copolymers with controlled properties for implant applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Thermal and mechanical properties of copolymers of methyl methacrylate with N‐aryl itaconimides

The article describes the preparation of cast copolymer sheets of methyl methacrylate with varying mole fractions of N‐(p‐methoxyphenyl) itaconimide/N‐(2‐methoxy‐5‐chlorophenyl) itaconimide/N‐(3‐methoxy‐5‐chlorophenyl) itaconimide monomers by bulk copolymerization using azobisisobutyronitrile as an initiator. The effect of incorporation of varying mole fractions of N‐arylsubstituted itaconimides in poly(methyl methacrylate) (PMMA) backbone on the thermal, optical and physicomechanical properties of cast acrylic sheets were evaluated. The glass transition temperature and the thermal stability increased with increasing amounts of itaconimides in the polymer backbone. An increase in tensile strength, flexural strength, and storage modulus was also observed. The impact strength decreased marginally upon incorporation of imides into the polymer backbone. A slight decrease in the transparency and a significant increase (4–50%) in the haze was observed. The chemical resistance of PMMA remains unaffected by copolymerization. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Novel poly(methyl methacrylate)‐block‐polyurethane‐block‐poly(methyl methacrylate) tri‐block copolymers through atom transfer radical polymerization

Poly(methyl methacrylate)‐block‐polyurethane‐block‐poly(methyl methacrylate) tri‐block copolymers have been synthesized successfully through atom transfer radical polymerization of methyl methacrylate using telechelic bromo‐terminated polyurethane/CuBr/N,N,N,N″,N″‐pentamethyldiethylenetriamine initiating system. As the time increases, the number‐average molecular weight increases linearly from 6400 to 37,000. This shows that the poly methyl methacrylate blocks were attached to polyurethane block. As the polymerization time increases, both conversion and molecular weight increased and the molecular weight increases linearly with increasing conversion. These results indicate that the formation of the tri‐block copolymers was through atom transfer radical polymerization mechanism. Proton nuclear magnetic resonance spectral results of the triblock copolymers show that the molar ratio between polyurethane and poly (methyl methacrylate) blocks is in the range of 1 : 16.3 to 1 : 449.4. Differential scanning calorimetry results show T_g of the soft segment at ?35°C and T_g of the hard segment at 75°C. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polymerization of methyl methacrylate with Nickel(II)α‐benzoinoxime complex

Polymerizations of methyl methacrylate (MMA) monomer initiated by a novel Ni(II)α‐benzoinoxime complex have been achieved under homogeneous conditions in the 25–60°C temperature range. The activity for polymerization increases with reaction temperature and by carrying out the polymerization in solution of low‐polarity solvents without any induction time. The obtained polymers have weight‐average molecular weights about 10⁵ and slight broad polydispersity indexes (2.2 ≤ M_w/M_n ≤ 3.3). Dependence of rate constants polymerization and decomposition of initiator (k_app and k_d, respectively) on temperature was investigated and activation parameters were computed from Arrhenius plot. ¹H‐NMR analysis of PMMA revealed a syndio‐rich atactic microstructure in agreement with conventional radical process. Radical scavenger TEMPO effect together with microstructure and molecular weight distributions data supported that the polymerization proceed via free radical mechanism. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Amphiphilic diblock copolymers poly(2‐hydroxyethylmethacrylate)‐b‐(N‐phenylmaleimide) and poly(2‐hydroxyethylmethacrylate)‐b‐(styrene) using the macroinitiator poly(HEMA)‐Cl by ATRP: Preparation,characterization, and thermal properties

In recent years, much attention has been given to the development of specialty polymers from useful materials. In this context, amphiphilic block copolymers were prepared by atom transfer radical polymerization (ATRP) of N‐phenylmaleimide (N‐PhMI) or styrene using a poly(2‐hydroxyethylmethacrylate)‐Cl macroinitiator/CuBr/bipyridine initiating system. The macroinitiator P(HEMA)‐Cl was directly prepared in toluene by reverse ATRP using BPO/FeCl₃ 6 H₂O/PPh₃ as initiating system. The microstructure of the block copolymers were characterized using FTIR, ¹H‐NMR, ¹³C‐NMR spectroscopic techniques and scanning electron microscopy (SEM). The thermal behavior was studied by differential scanning calorimetry (DSC), and thermogravimetry (TG). The theoretical number average molecular weight (M_n,th) was calculated from the feed capacity. The microphotographs of the film's surfaces show that the film's top surfaces were generally smooth. The TDT of the block copolymer P(HEMA)₈₀‐b‐P(N‐PhMI)₂₀ and P(HEMA)₉₀‐b‐P(St)₁₀ of about 290°C was also lower than that found for the macroi′nitiator poly(HEMA)‐Cl. The block copolymers exhibited only one T_g before thermal decomposition, which could be attributed to the low molar content of the N‐PhMI or St blocks respectively. This result also indicates that the phase behavior of the copolymers is predominately determined by the HEMA block. The curves reveal that the polymers show phase transition behavior of amorphous polymers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Redox initiation system of ceric salt and α,ω‐dihydroxy poly(dimethylsiloxane)s for vinyl polymerization

The redox system of ceric salt and α,ω‐dihydroxy poly(dimethylsiloxane) is used to polymerize vinyl monomers such as acrylonitrile and styrene to produce block copolymers. The concentration and type of α,ω‐dihydroxy poly(dimethylsiloxane) affects the yield and the molecular weight of the copolymers. The copolymers have about 20°C lower glass‐transition temperatures and much higher contact angle values than of the corresponding homopolymer of vinyl monomers, although the weight percent of α,ω‐dihydroxy poly(dimethylsiloxane) of the copolymers is in the range of 1–2%. © 2006 Wiley Periodicals Inc. J Appl Polym Sci 102: 2112–2116, 2006     

Synthesis and characterization of the novel block copolymer poly(ε‐caprolactone)‐b‐poly(4‐vinyl pyridine) by the combination of coordination and controlled free‐radical polymerizations

A novel block copolymer, poly(ε‐caprolactone)‐b‐poly(4‐vinyl pyridine), was synthesized with a bifunctional initiator strategy. Poly(ε‐caprolactone) prepolymer with a 2,2,6,6‐tetramethylpiperidinyloxy (TEMPO) end group (PCL_T) was first obtained by coordination polymerization, which showed a controlled mechanism in the process. By means of ultraviolet spectroscopy and electron spin resonance spectroscopy, the TEMPO moiety was determined to be intact in the polymerization. The copolymers were then obtained by the controlled radical polymerization of 4‐vinyl pyridine in the presence of PCL_T. The desired block copolymers were characterized by gel permeation chromatography, Fourier transform infrared spectroscopy, and NMR spectroscopy in detail. Also, the effects of the molecular weight and concentration of PCL_T on the copolymerization were investigated. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2280–2285, 2004     

New filtrate loss controller based on poly(methyl methacrylate‐co‐vinyl acetate)

The drilling of petroleum wells requires the use of suitable drilling fluids to ensure efficient operation without causing rock damage. Specific polymers have been used to control infiltration during drilling, to reduce operational problems. In this study, spherical microparticles of poly(methyl methacrylate‐co‐vinyl acetate) were synthesized (by suspension polymerization), characterized, and evaluated in terms of their performance in controlling filtrate loss of aqueous fluids. A filter press test with ceramic disk, simulating the rock, was used. The performance of the synthesized materials was compared with commercial polymers. It was observed that the performance of the material is directly associated with the relation between particle size and pore size of the rock specimen. Furthermore, for a suitable particle size, the rubbery characteristic of the material produces a more efficient filter cake, for filtrate control. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40646.     

Synthesis and characterization of poly(n‐butyl methacrylate)‐b‐polystyrene diblock copolymers by atom transfer radical emulsion polymerization

Poly(n‐butyl methacrylate) (PBMA)‐b‐polystyrene (PSt) diblock copolymers were synthesized by emulsion atom transfer radical polymerization (ATRP). PBMA macroinitiators that contained alkyl bromide end groups were obtained by the emulsion ATRP of n‐butyl methacrylate with BrCH₃CHCOOC₂H₅ as the initiator; these were used to initiate the ATRP of styrene (St). The latter procedure was carried out at 85°C with CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as the catalyst and polyoxyethylene(23) lauryl ether as the surfactant. With this technique, PBMA‐b‐PSt diblock copolymers were synthesized. The polymerization was nearly controlled; the ATRP of St from the macroinitiators showed linear increases in number‐average molecular weight with conversion. The block copolymers were characterized with IR spectroscopy, ¹H‐NMR, and differential scanning calorimetry. The effects of the molecular weight of the macroinitiators, macroinitiator concentration, catalyst concentration, surfactant concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP are also reported. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2123–2129, 2005     

Synthesis of photoisomeric azobenzene monomers and model compound effect on electric–optical properties in PDLC films

A series of azobenzene monomers and related model compounds with various side‐chain lengths were synthesized. The electrooptical properties of a polymer‐dispersed liquid crystal (PDLC) were verified by side‐chain methoxy azobenzene in various chain lengths (n = 3, 6, 11). The properties under various voltages were measured and the effect of extra voltage on the transmittance of PDLC was researched as well. The experiment demonstrated the validity of employing these side chain methoxy azobenzene materials in electrooptical devices. The azobenzene model compound showed better electric–optical and thermal–optical properties, having a higher contrast ratio (CR = 689) and a lower saturation voltage (4.7 V/μm). All the azobenzene molecules can be photoisomerized through UV light irradiation, following the mechanism of isomerization. The reversible photo and heat isomerization property was studied. The cis‐azobenzene that was transformed from the trans‐azobenzene irradiated by UV light can decrease the clearing point of the liquid crystal phase. We used this unique characteristic to record image patterns and it worked successfully. We synthesized the azobenzene monomers can stabilize the PDLC and their relative model compounds with various alkyl chain lengths even got better electric–optical effects. We found that azobenzene monomer shows different behaviors in the electric–optical property from its relative model compound. The difference between the systems were explained using a proposed model. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 721–732, 2005     

Synthesis,characterization and properties evaluation of copolymers of 2,3,4,5,6‐pentafluorostyrene and N‐phenylmaleimide

Copolymers of 2,3,4,5,6‐pentafluorostyrene (PFS) having a combination of high hydrophobicity and high glass transition temperature (T_g) are reported here for the first time. The copolymerization was carried out using N‐phenylmaleimide (NPM) as the comonomer and azobisisobutyronitrile (AIBN) as the initiator under both conventional thermal heating and microwave heating. The initial copolymerization rate was found to be higher under microwave heating than under thermal heating. The copolymerization parameters were determined using the Fineman–Ross method and were found to be r₁ (NPM) = 0.28 and r₂ (PFS) = 0.86. Increased incorporation of NPM in the copolymers led to an increase in T_g of the copolymers without significantly affecting the hydrophobicity of poly(2,3,4,5,6‐pentafluorostyrene). Thermal stability of the copolymers is also reported. Copyright © 2005 Society of Chemical Industry