Generalized digital Butterworth filter design

This correspondence introduces a new class of infinite impulse response (IIR) digital filters that unifies the classical digital Butterworth filter and the well-known maximally flat FIR filter. New closed-form expressions are provided, and a straightforward design technique is described. The new IIR digital filters have more zeros than poles (away from the origin), and their (monotonic) square magnitude frequency responses are maximally flat at ω=0 and at ω=π. Another result of the correspondence is that for a specified cutoff frequency and a specified number of zeros, there is only one valid way in which to split the zeros between z=-1 and the passband. This technique also permits continuous variation of the cutoff frequency. IIR filters having more zeros than poles are of interest because often, to obtain a good tradeoff between performance and implementation complexity, just a few poles are best     

DESIGN OF POLYPHASE WAVE DIGITAL FILTERS WITH APPROXIMATELY LINEAR PHASE

It is well known that IIR digital filters require quite fewer computations,comparedwith FIR filters,in order to meet stringent magnitude specifications when the phase distortioncan be tolerated.An approximately linear phase,however,can be also obtained with the IIRfilter by making use of a technique without increasing the complexity.Based on a certain numberof attenuation zeros in the pass band,a new approach is developed for the design of polyphasewave digital filters with exact magnitude responses and Chebyshev approximation of the desiredphase responses.The minimum number of attenuation zeros is estimated,and some examples areincluded.     

具有近似线性相位特性的多相波数字滤波器的设计

不考虑相位失真,而要求满足比较苛刻的振幅特性的时候,和FIR滤波器比较起来,采用 IIR 滤波器,计算量要小很多.但对某些IIR滤波器,采取适当的方法,也可以使其相位失真变得很小.本文提出一种新的设计方法,用来设计振幅响应完全满足设计要求,而相位特性用Chebyshev 近似来实现的多相波数字滤波器.这种方法的关键在于确定通带中的若干衰减零点.文中对需要的最小衰减零点数作了估计.实例表明,用这种方法设计的滤波器,时延小,相位特性非常接近线性.     

Analysis and design of periodically time-varying IIR filters, withapplications to transmultiplexing

Fundamental constraints on the form of infinite impulse response (IIR) periodically time-varying (PTV) filters are identified, and a design technique with well-defined error and stability characteristics based on those constraints is presented. The design technique is based on the selection of poles and zeros within the time-invariant filter banks of equivalent PTV filter analysis structures. A simple example is presented to illustrate the design method, which implements the IIR PTV as a time-invariant all-feedback IIR filter of the form 1/D(z^P) cascaded with an finite impulse response (FIR) PTV filter. An application of IIR PTV filters to telecommunications transmultiplexing is presented to illustrate the design method and for comparison to an existing PTV design method. The computational complexity of the resulting system compares favorably with that of existing transmultiplexers     

Design of two-dimensional digital filters using singular-valuedecomposition and balanced approximation method

It is shown that the singular-value decomposition (SVD) of the sampled amplitude response of a two-dimensional (2-D) digital filter possesses a special structure: every singular vector is either mirror-image symmetric or antisymmetric with respect to its midpoint. Consequently, the SVD can be applied along with 1-D finite impulse response (FIR) techniques for the design of linear-phase 2-D filters with arbitrary prescribed amplitude responses which are symmetrical with respect to the origin of the (ωΨω₂) plane. The balanced approximation method is applied to linear-phase 2-D FIR filters of the type that may be obtained by using the SVD method. The method leads to economical and computationally efficient filters, usually infinite impulse response filters, which have prescribed amplitude responses and whose phase responses are approximately linear     

Design of FIR digital filters with prescribed flatness and peak error constraints using second-order cone programming

This paper studies the design of digital finite impulse response (FIR) filters with prescribed flatness and peak design error constraints using second-order cone programming (SOCP). SOCP is a powerful convex optimization method, where linear and convex quadratic inequality constraints can readily be incorporated. It is utilized in this study for the optimal minimax and least squares design of linear-phase and low-delay (LD) FIR filters with prescribed magnitude flatness and peak design error. The proposed approach offers more flexibility than traditional maximally-flat approach for the tradeoff between the approximation error and the degree of design freedom. Using these results, new LD specialized filters such as digital differentiators, Hilbert Transformers, Mth band filters and variable digital filters with prescribed magnitude flatness constraints can also be derived.     

基于FIR与相位补偿IIR滤波器的雷达回波信号处理

FIR与IIR频率选择滤波器的设计,被广泛应用于数字信号处理领域之中。文章以雷达回波信号的数字处理为例,首先分别设计FIR,IIR滤波器完成了对信号特定频率分量的滤除。进而,针对IIR滤波器的非线性相位,基于最优化设计全通系统实现了相位补偿,并对FIR,IIR滤波器进行了综合比较。     

Frequency domain design of FIR and IIR Laplacian of Gaussian filters for edge detection

This work addresses the design of LoG filters in the frequency domain within a structure formed by the cascade of quasi-Gaussian and discrete Laplacian filters. The main feature of such a structure is that it requires half the number of convolutions of the classical structure in which the LoG transfer function is expressed as the sum of two separable transfer functions of 1-D Gaussian and LoG type. Such a perspective allows one to rephrase the design of IIR and FIR filters for edge detection as a frequency domain approximation problem solvable by standard digital filter design tools. The zero-phase IIR solutions have a good performance at low orders and approximation errors practically independent of the aperture parameter. The characteristics of the nearly linear-phase IIR filters solving the problem suggest the consideration of linear-phase FIR filters with zeros constrained on the unit circle. The use of such filters leads to remarkable computational savings with respect to the filters designed by impulse response sampling. The agreement between the edge values obtained by the filters designed according to the scheme proposed in this work and those obtained by standard techniques is very good.Work carried out with the financial support of the C.N.R.-Progetto Finalizzato Robotica, contract no. 91.01942.PF67.     

Two-channel IIR QMF banks with approximately linear-phase analysisand synthesis filters

Perfect linear-phase two-channel QMF banks require the use of finite impulse response (FIR) analysis and synthesis filters. Although they are less expensive and yield superior stopband characteristics, perfect linear phase cannot be achieved with stable infinite impulse response (IIR) filters. Thus, IIR designs usually incorporate a postprocessing equalizer that is optimized to reduce the phase distortion of the entire filter bank. However, the analysis and synthesis filters of such an IIR filter bank are not linear phase. In this paper, a computationally simple method to obtain IIR analysis and synthesis filters that possess negligible phase distortion is presented. The method is based on first applying the balanced reduction procedure to obtain nearly allpass IIR polyphase components and then approximating these with perfect allpass IIR polyphase components. The resulting IIR designs already have only negligible phase distortion. However, if required, further improvement may be achieved through optimization of the filter parameters. For this purpose, a suitable objective function is presented. Bounds for the magnitude and phase errors of the designs are also derived. Design examples indicate that the derived IIR filter banks are more efficient in terms of computational complexity than the FIR prototypes and perfect reconstruction FIR filter banks. Although the PR FIR filter banks when implemented with the one-multiplier lattice structure and IIR filter banks are comparable in terms of computational complexity, the former is very sensitive to coefficient quantization effects     

Design of IIR eigenfilters in the frequency domain

The eigenfilter approach is an appealing way of designing digital filters, mainly because of the simplicity of its implementation. In this correspondence, a new method of applying the eigenfilter approach to the design of infinite impulse response (IIR) filters is described. The procedure works in the frequency domain and yields the coefficients of a causal rational transfer function having an arbitrary number of poles and zeros. Some examples of filter design are given to show the effectiveness of the method presented     

Using fractional delay to control the magnitudes and phases of integrators and differentiators

The use of fractional delay to control the magnitudes and phases of integrators and differentiators has been addressed. Integrators and differentiators are the basic building blocks of many systems. Often applications in controls, wave-shaping, oscillators and communications require a constant 90deg phase for differentiators and -90deg phase for integrators. When the design neglects the phase, a phase equaliser is often needed to compensate for the phase error or a phase lock loop should be added. Applications to the first-order, Al-Alaoui integrator and differentiator are presented. A fractional delay is added to the integrator leading to an almost constant phase response of -90deg. Doubling the sampling rate improves the magnitude response. Combining the two actions improves both the magnitude and phase responses. The same approach is applied to the differentiator, with a fractional sample advance leading to an almost constant phase response of 90deg. The advance is, in fact, realised as the ratio of two delays. Filters approximating the fractional delay, the finite impulse response (FIR) Lagrange interpolator filters and the Thiran allpass infinite impulse response (IIR) filters are employed. Additionally, a new hybrid filter, a combination of the FIR Lagrange interpolator filter and the Thiran allpass IIR filter, is proposed. Methods to reduce the approximation error are discussed.     

Design of stable IIR digital filter based on least P-power error criterion

In this paper, the least p-power error criterion is presented to design digital infinite impulse response (IIR) filters to have an arbitrarily prescribed frequency response. First, an iterative quadratic programming (QP) method is used to design a stable unconstrained one-dimensional IIR filter whose optimal filter coefficients are obtained by solving the QP problem in each iteration. Then, the proposed method is extended to design constrained IIR filters and two-dimensional IIR filters with a separable denominator polynomial. Finally, design examples of the low-pass filter are demonstrated to illustrate the effectiveness of the proposed iterative QP method.     

On fast FIR filters implemented as tail-canceling IIR filters

We have developed an algorithm based on synthetic division for deriving the transfer function that cancels the tail of a given arbitrary rational (IIR) transfer function after a desired number of time steps. Our method applies to transfer functions with repeated poles, whereas previous methods of tail-subtraction cannot. We use a parallel state-variable technique with periodic refreshing to induce finite memory in order to prevent accumulation of quantization error in cases where the given transfer function has unstable modes. We present two methods for designing linear-phase truncated IIR (TIIR) filters based on antiphase filters. We explore finite-register effects for unstable modes and provide bounds on the maximum TIIR filter length. In particular, we show that for unstable systems, the available dynamic range of the registers must be three times that of the data. Considerable computational savings over conventional FIR filters are attainable for a given specification of linear-phase filter. We provide examples of filter design. We show how to generate finite-length polynomial impulse responses using TIIR filters. We list some applications of TIIR filters, including uses in digital audio and an algorithm for efficiently implementing Kay's optimal high-resolution frequency estimator     

Two Classes of Cosine-Modulated IIR/IIR and IIR/FIR NPR Filter Banks

This paper introduces two classes of cosine-modulated causal and stable filter banks (FBs) with near perfect reconstruction (NPR) and low implementation complexity. Both classes have the same infinite-length impulse response (IIR) analysis FB but different synthesis FBs utilizing IIR and finite-length impulse response (FIR) filters, respectively. The two classes are preferable for different types of specifications. The IIR/FIR FBs are preferred if small phase errors relative to the magnitude error are desired, and vice versa. The paper provides systematic design procedures so that PR can be approximated as closely as desired. It is demonstrated through several examples that the proposed FB classes, depending on the specification, can have a lower implementation complexity compared to existing FIR and IIR cosine-modulated FBs (CMFBs). The price to pay for the reduced complexity is generally an increased delay. Furthermore, two additional attractive features of the proposed FBs are that they are asymmetric in the sense that one of the analysis and synthesis banks has a lower computational complexity compared to the other, which can be beneficial in some applications, and that the number of distinct coefficients is small, which facilitates the design of FBs with large numbers of channels.     

Implementation of Digital Unbiased FIR Filters with Polynomial Impulse Responses

This paper addresses the design and implementation of digital unbiased finite impulse response (FIR) filters with polynomial impulse response functions. The transfer function, its fundamental properties, and a general block-diagram are discussed for the impulse response represented with the l-degree Taylor series expansion. As a particular results, we show a fundamental identity uniquely featured to such filters in the transform domain. For low-degree impulse responses, the transfer functions are found in simple closed forms and represented in compact block-diagrams. The magnitude and phase responses are also analyzed along with the group delays. A comparison with predictive FIR filters is given. As examples of applications, filtering of time errors of local clocks is discussed along with the low-pass filter design employing a cascade of the unbiased FIR filters.     

Design of two-channel linear-phase QMF banks based on real IIR all-pass filters

The design of two-channel linear-phase quadrature mirror filter (QMF) banks constructed by real infinite impulse response (IIR) digital all-pass filters is considered. The design problem is appropriately formulated to result in a simple optimisation problem. Using a variant of Karmarkar's algorithm, the optimisation problem can be efficiently solved through a frequency sampling and iterative approximation method to find the real coefficients for the IIR digital all-pass filters. The resulting two-channel QMF banks possess an approximately linear phase response without magnitude distortion. The effectiveness of the proposed technique is achieved by forming an appropriate Chebyshev approximation of the desired phase response and then finding its solution from a linear subspace in a few iterations. Finally, several simulation examples are presented for illustration and comparison     

General IIR optical filter design for WDM applications usingall-pass filters

A general design algorithm is presented for infinite impulse response (IIR) bandpass and arbitrary magnitude response filters that use optical all-pass filters as building blocks. Examples are given for an IIR multichannel frequency selector, an amplifier gain equalizer, a linear square-magnitude response, and a multi-level response. Major advantages are the efficiency of the IIR filter compared to finite impulse response (FIR) filters, the simplicity of the optical architecture, and its tolerance for loss. A reduced set of unique operating states is discussed for implementing a reconfigurable multichannel selection filter     

A new class of two-channel biorthogonal filter banks and waveletbases

Proposes a novel framework for a new class of two-channel biorthogonal filter banks. The framework covers two useful subclasses: i) causal stable IIR filter banks. ii) linear phase FIR filter banks. There exists a very efficient structurally perfect reconstruction implementation for such a class. Filter banks of high frequency selectivity can be achieved by using the proposed framework with low complexity. The properties of such a class are discussed in detail. The design of the analysis/synthesis systems reduces to the design of a single transfer function. Very simple design methods are given both for FIR and IIR cases. Zeros of arbitrary multiplicity at aliasing frequency can be easily imposed, for the purpose of generating wavelets with regularity property. In the IIR case, two new classes of IIR maximally flat filters different from Butterworth filters are introduced. The filter coefficients are given in closed form. The wavelet bases corresponding to the biorthogonal systems are generated. the authors also provide a novel mapping of the proposed 1-D framework into 2-D. The mapping preserves the following: i) perfect reconstruction; ii) stability in the IIR case; iii) linear phase in the FIR case; iv) zeros at aliasing frequency; v) frequency characteristic of the filters     

Low-power digital filtering using approximate processing

We present an algorithmic approach to the design of low-power frequency-selective digital filters based on the concepts of adaptive filtering and approximate processing. The proposed approach uses a feedback mechanism in conjunction with well-known implementation structures for finite impulse response (FIR) and infinite impulse response (IIR) digital filters. Our algorithm is designed to reduce the total switched capacitance by dynamically varying the filter order based on signal statistics. A factor of 10 reduction in power consumption over fixed-order filters is demonstrated for the filtering of speech signals     

基于Laguerre滤波器等价设计的IIR宽带波束形成

常规IIR宽带波束形成器可以获得比FIR宽带波束形成器更好的性能,但其需要多极点的自适应调整过程,存在稳定性无法保证,计算复杂度较高等问题.本文提出一种新的基于IIR滤波器的宽带波束形成算法.该算法基于高阶Laguerre宽带波束形成器,利用双线性变换和函数束方法设计相应的低阶等价IIR宽带波束形成器.仿真实验及理论分析表明,该方法无需常规IIR宽带波束形成器的多极点自适应调整过程,在保证算法稳定性的同时,减少了计算复杂度,并提高了输出信干噪比(SINR).